only read access to the user

Similar Questions

• How to give read access to the users in IOM 10 g only

  Hello
  I created a new group readonlyaccess in IOM 10 g. I have given-menu item 'Element menu to manage users' group. Dmade a user member of this group. Now when I login with this user, I am able to see the users menu-search item, but when I search users, then no results of the search are displayed. I'm not able to figure out where I am doing wrong or what Miss me.
  
  
  Please let me know if we can give only read access for end-users to IOM 10 g.
  
  
  Thank you
  Kalpana.

  Refer to this:

  {: identifier of the thread = 2148294}

  -Marie

• Is it possible to have read access to the users 'my files' / proxy issue

  Hello
  is it possible to set up security so that an administrator has read access to all users files? for example in user content "my files"?
  If the only possibility is to take ownership and grant access, what are the undesirable consequences of doing?
  We enocunter several problems with users using Olivier wrong, but cannot access their private ibots/reports/subscriptions;
  
  or at least: how to copy records users in test so that we can see the content. without access so copied the folders are empty;
  
  Thanks in advance for your suggestions
  Rgds
  
  Published by: UserMB on July 14, 2009 02:04
  
  Published by: UserMB on July 14, 2009 02:10
  
  Published by: UserMB on August 4, 2009 04:03

  Here is a quick and dirty way to impersonate any user... with to set up anyting...

  http://carpediemconsulting.WordPress.com/2008/06/20/a-quick-way-to-impersonate-a-user/

• How to assign only read access to a user for HFM App

  Hello

  I have a doubt like the United States, the actual process of the stripe to assign a user as the read access only for request of HFM. I am new to this and I know that this need be done through HSS. Could then someone let me know the process

  Please ask you to close the post if it seems your problem.

  Thank you

  ~ KKT ~.

• Assignment only read access to the payroll

  Hello
  
  I have a requiremnt; Payroll users should not change the assignemnt screen values expecailly Organziaiton, group of people, job, position, name of the payroll, Traghetti. How to make read-only access to the screen of the assignment. But they need to get to the screen from people and they need to run fast compensation.
  
  How to do it.
  
  Concerning
  SAI

  You can also use personalization at the block level and mark of responsibility allowed insertion / update authorized as false.

• Only read access to the ACS

  Is it possible to configure read-only access in the TAS.

  New to ACS and said this is not possible.

  If so, can you point me to a doc or better yet, some examples of configuration.

  Thanks in advance

  Unfortunately, it's OK, access resolution is at the page level.

  Mounira

• Only read access to the ACS for a specific group

  All the

  I use an ACS with version (5.5.0.46.8). There is a group within the company requesting access RO to GBA.

  This group is already created in the user and groups of banks of identities/EXTERNAL/AD/directory

  In all of the elements/device/order Admin policy, I already have a set of SHOW command created

  I have looked in policies/Acess Network Services access authorization / Default / access but am a little lost after that.

  Please inform promptly.

  Looks like 'show' and 'sh' problem in the command set.

  If you pass for full access with it. It work?

  Remove 'sh' him then use some commands specific complete show.

  Let me know the results!

• Administration tool only read access

  I was wondering if there is a single read access to the administration tool.
  
  What I'm trying to do is to test the Build repository with best practices, given that this repository is live and made by a group of developers.
  As I recently joined and wanted to know what resources I need to view and test the repository.
  I was wondering if there is a read access only to the administration tool, not sure this subject and also do I BI oracle installed on my local machine to view the repository.
  
  If not, is there a way where I can get to see the repository without having the privileges to make any change or save changes to online or offline repositoryin mode
  
  Thanks Deva...
  
  Published by: UOOLK on June 1, 2012 02:48

  Hello

  Yes.you need to install obiee customer admin tool.there is no browser web access (xml medta dictionatiory option available - you must activate it, then using it)

  Dictionary of metadata in obiee 11g (access via a web browser)
  http://whatisobiee.com/generate-and-deploy-metadata-dictionary-in-OBIEE-11g/
  http://gerardnico.com/wiki/dat/OBIEE/metadata_dictionnary

  obiee11g admin client tool download you obiee dashboard home page its
  https://ipaddress:9704/Analytics/saw.dll?bieehome (start... Download desktop BI tools) else
  You can download from oracle using RTO a/c
  http://www.Oracle.com/technetwork/middleware/BI-Enterprise-Edition/downloads/bus-intelligence-11g-165436.html

  Thnaks
  Deva

  Published by: Devarasu on June 1, 2012 18:43

• Is there a way to give a user access to the users and computers active directory, without being an administrator

  I want to be able to allow user group to be able to reset passwords and create accounts in an organizational unit.  I delegate control of the organizational unit for the group, but if I connect to the domain controller and try opening users and computers active directory, we wonder an administrator password.  I have a mix of two domain controllers Server 2003 and a Server 2008 DC.  Is there a way to give a group access to the users and computers active directory without being administrator?

  For assistance, please ask for help in the appropriate Microsoft TechNet Windows Server Forum.
  
  Thank you.

• How to deny access to the user control panel?

  A PC running under that Windows 7 is used by several users, I connect PC as an administrator and try to change the policy to prohibit access for the user in the control panel.

  But I can't find a way to block certain users access to the control panel.

  I don't know other users information to connect.

  Is it possible to block some users access to the control panel at the same time of admin account?

  Advice me please.

  A PC running under that Windows 7 is used by several users, I connect PC as an administrator and try to change the policy to prohibit access for the user in the control panel.

  But I can't find a way to block certain users access to the control panel.

  I don't know other users information to connect.

  Is it possible to block some users access to the control panel at the same time of admin account?

  Advice me please.

  You can use Group Policy prohibit access to the control panel...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-7-options-for-standard-user-account/07c1084b-B65F-4b33-8579-1749ca661ded

  its for all users this grouppolicy is enabled

• Read only Web access to the nodes of ISE

  Hi all

  How can we create an account read only for web access from nodes Cisco ISE? I created a new user name with the role of the 'user' but not able to log into the web administration page.

  Thank you best regards &,.

  Guelma

  RBAC policies determine if an administrator can benefit from a specific type of access to a menu item, or other elements of group identity data. You can grant or deny access to a data item menu group to point or identity to an administrator from the admin group by using RBAC policies. When administrators log on the administration portal, they can access menus and data which are based on policies and permissions set for the administrative groups with which they are associated.

  Political RBAC map admin groups menu access and data access permissions. For example, you can prevent a network administrator to display the menu of operations Admin Access and policy data elements. This can be achieved by creating a RBAC policy customized to the admin group that is associated with the network administrator.

  Cisco ISE allows you to create custom menus for the access permissions that you can map to a RBAC policy. According to the role of administrators, you can allow access to only the specific menu options.

  Step 1 choose Administration > system > Admin Access > permission > permission > access to the Menu.

  Step 2, click Add and enter values for the name and Description fields.

  Step 3: click to enlarge the menu until the desired item, then click on the menu item (s) on which you want to create permissions.

  Step 4 in the permissions for the domain of the access to the Menu, click view.

  Step 5 click on submit.

• Need to give rights of folder only read access without copyright

  I installed windows server 2008 in my data center. We created a folder on the local drive and shared. In the same folder we provide access to records to access read-only without copyright. Now I got permission to play in the same folder, but the user able to adapt file from within the same folder.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forums. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/categories/

• Read access to the members of scenario in Smart View

  Hello

  In the current context of Hyperion Planning, we want to revoke write access to some scenarios (for example real) after loading data in the month is complete. Say I want to allow the user to enter data only for the current month i.e. Ms FY13.

  I would update the Member properties of scenario as follows: start month = Sep, end month = MS, start year = FY13 end year = FY13. When I access scenarios through forms, this allows me to enter data only in the MS FY13 and other months seem to be read-only. It's quite OK.

  However, if I can access the same scenario via Smart View or add Essbase in, I can modify or write data throughout all the months of the scenario. The scenario properties do not come to play. How this situation can be treated.

  I want to update the (real) script to be read only for all months except one after loading the actual data at the beginning of the month.

  Start the month setting end months of planning is there only when access you it through a programming interface. (Which you already did).

  You can get this out-of-box like you can not affect safety on the period, what you can try is (I did not try, so it may or may operate Word) try to modify the filter for a user (in environmental assessments) and add year period combination.

  If it works, then you need to add a mechanism where after each planning security update this update goes into Essbase.

  Concerning

  Celvin

  http://www.orahyplabs.com

• Only read access to UGM

  Hello
  By looking at the documentation, it is not possible to create read-only access in the UGM. The use case would be to have a member of the team support desk to be able to check the status of a user account and also check the role and group membership. The permissions described in the documentation seems to suggest that with the level of permissions that allow access to the MFU, users woud still be able to create requests for change, which is not necessarily desirable.
  
  Thank you
  Drew

  If you don't add all the roles, but give the user access UGM (user-> access-> site-> MFU access), then they will be able to view, but not edit or export users/groups.

  also, if you use an environmental strategy of export/import, import environment should not allow editing, regardless of the permissions granted.

  M

• Admin has no access to the user account

  I have a XP Pro computer where a user profile directory has no access at all to administrators: only for himself and system.

  Is this normal and supported? How can this be achieved?

  When I create a new account on this computer, the profile directory allows access to administrators.

  The problem is that I want to use some backup software that runs as administrator, so that it cannot properly access the user's data.

  NT Backup of the Microsoft can save everything without problems.

  I would so understand, I can ask the author of said software to backup to fix, or my setup is weird way and is.

  Thank you

  -pa

  You could remove rights administrative account to any file or folder on the computer while you could do this for a profile.  If you leave rights system alone, Yes, the built-in backup function still works.

  However, anyone with administrative rights could just as easily give themselves rights of return...