Open creation master 14 impossible.

Similar Questions

• Windows can't open add printer. Impossible operation completed (error 0x000000c1)

  When I try to "Add a printer" in the Panel in Windows 7, I have "Windows can't open add printer." Impossible operation completed (error 0x000000c1). »

  I uninstalled all the other printer drivers (I'm pretty sure. How can I know?).

  It's an all-in-one HP Officejet Pro 8600, and I can use the scanner very well. I can't add the printer.

  Thanks for responding!

  I tried several solutions and searched many forums. This has actually been a problem for some time now, and I do not know what facilities of printer driver broke.

  I did put a lot of thought into it and just posted stuff to the network and printed one of my other computers. It became a problem recently, when I was too lazy to get up and turn on one of the other computers. :-) I then decided that I just needed to fix it.

  I read all the posts I could find for each version of Windows treats this problem and tried each of them. I removed all the old drivers (at least I think I did. I couldn't find anybody would say, 'Here are the drivers installed.'). I downloaded the new drivers from HP. I edited the registry. I went to the folder/Windows/System32/Spool/something and deleted all. I searched all references to Lexmark (my old printer) and deleted.

  In any case, last night my boot sector failed, so I ended up reinstalling Windows. I just finished now, and the printer works fine, now.

  No,

  PS I'm sorry that this thread will be of no use to any person responsible research. I found a lot of them, too.

• I have just the creative application of cloud on my mac than its opening upward and said 'impossible to arrive on the Adobe servers. Please check your firewall settings and try again in a few minutes. I keep trying and it still happens?

  I have just the creative application of cloud on my mac than its opening upward and said 'impossible to arrive on the Adobe servers. Please check your firewall settings and try again in a few minutes. I keep trying and it still happens?

  Hello

  Please make sure that there is no Proxy setting on your network and also check that you are logged into admin and not as mobile admin. You can also try to connect the MAC to a Wi - Fi network to different/open or Mobile Hotspot and disable all antivirus on MAC titles and try to check if the creative cloud app works.

  Thank you.

• CS6 open only master pages?

  Hello

  Recently, I upgraded my Adobe InDesign CS5 of to CS6. Since then, I had three different files that has a similar problem - when I open them, these files, they open automatically to my master page. It was pretty jarring the first time, it happened to me and I found myself watching a nearly blank page!

  Now this isn't a huge problem, because I can use the Pages palette to open the page itself. But it's annoying, because there seems to be no way to change this, so this ID opens to the top of the page itself, rather than the model is based on that.

  I can't get a 'Save' after I see my page because ID think not that I changed something in the actual file, (which in fact, I did not).

  I print the file, and it seems I can still print all my content, even if it does not automatically appear on my viewing screen (without specifying that I want to see the real pages).

  So my question is this: would someone have an idea how I could solve this problem? Does anyone else know a similar problem where ID would only open your master page (s)?

  -Brad

  Normally, ID will be open to the last view when the file was saved. Try to make a backup from a page of a document to overwrite the old version, or (better) under a new name and see if it stillopens to a master page.

• When I try to open the master collection I get an error message saying invalid checksum

  When I try to open the master collection I get an error message saying invalid checksum

  If you complete solution 1 to troubleshoot Adobe Download Assistant - n_1 http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Solutio it will allow you to reset the download experience.  Please choose the default location for the user folder when to reset the download.

  Alternatively, you can follow the steps listed in http://forums.adobe.com/thread/981369 to launch a direct download.

• Card reader won't open my master pro compact flash 16 gb

  Compact Flash drive problem

  I have a master pro compact flash 16 gb 700 x /105mb/s...my built in hp pavilion m9457c card reader will read the drive but it will not open. It will open a map of much slower speed.

  Hello

  Have you updated the drivers for the HP card reader yet?

  Otherwise, I would do that first thing.

  http://WWW8.HP.com/us/en/support-drivers.html

  http://h30434.www3.HP.com/PSG/

• SE error message cannot open the XPCOM and impossible to open ALL pages

  After loading the updates, I get this error "Couldn't OPEN XCOM" I can't open any programs or emails, does not open Firefox or IE. Have tried the system restore several times without a bit of luck, even that properly ends, begins to tear my hair out now.

  You should not need to use windows, set up of the disks.

  You only need to remove the Firefox program folder to make sure that all files are removed before installig a freshly downloaded version of the Firefox installer.

• Could not open in safe mode; Impossible to uninstall ESET; Impossible to uninstall RegEdit

  1 problem started trying to uninstall ESET antivirus.  Error message says that C:\Program Mechanic\Data\map.ddat Registry; C:\Program mechanic\DAta\values.dat Registry; and this: \Program Files\Registry mechanic\Data\keys.dat is missing and need to reinstall.  Don't know how to do this.  With this number, ESET says to uninstall in safe mode.

  2. for safe mode, by Windows F1 help, the "shut down" instructions say, select "restart and you select 'safe mode'.  I "turn off computer" but not "shut down" and have all the options to select Safe mode.  I tried several times to restart the computer and tapping F8 to open in safe mode.  It does not work.  By Windows, a virus may prevent it from working?   I don't know how to fix.

  3 tried to uninstall Reg Edit (don't know where that came from).  Say unistall file error message is missing.  Don't know what to do.

  Help, please.  I have no antivirus protection at the present time.  Your help would be greatly appreciated.

  Reference error messages Registry Mechanic, which has nothing to do with the antivirus/ESET security products. Using a "cleaner" as Registry Registry Mechanic probably corrupted your computer. I don't know why you try uninstalling NOD32, but to switch to secure Mode, you must turn off your computer, and then restart it. As the computer restarts, repeatedly press the F8 key. That you will get the diagnosis menu where you can use your arrow to select Mode without failure.

  I don't know what you mean by "Reg Edit" either, but my guess is that your computer is infected and that you or someone else using the computer installed all kinds of registry cleaners/optimizers garbage in a vain attempt to get it repaired. Uninstalling these programs and perform in-depth analysis of malware.

  Go through these stages of systematically General malware removal:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Do not skip the preparatory work.

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop.

  The alternative is to backup your data and do a restore clean factory/install of Windows.

  http://aumha.net/viewtopic.php?t=28099 - thread registry cleaner
  http://Lifehacker.com/5482701/whats-the-registry-should-i-clean-it-and-whats-the-point

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  MS - MVP - Elephant Boy computers - don't panic!

• to select several files in the dialog box open, but it is impossible, isn't it?

  Hi forum,

  File and folder objects have a openDlg() method. The first also has the multiSelect parameter, it is not.

  I wish I could have also for the folder so that I can ctrl/shift select several folders instead of picking up a folder and all its subfolders processing.

  Maybe I'm missing something obvious or there is a solution to such a dialogue box.

  Kind regards

  Kasyan

  As suggested, an approach as possible:

  Folder.prototype.selectMultipleDialog = function (prompt,multiselect){
    var w = new Window('dialog','MultipleSelectDialog'),
    st,
    ls,
    btnGp,
      koBtn,
      okBtn,
      folderFilter = function(f){
          return (f instanceof Folder)
      },
      u,
      folders = this.getFiles(folderFilter),
      getFolderNames = function(foldersObjectArray){
          var n = foldersObjectArray.length,
          namesArray = [];
          while ( n--){
              namesArray[n] = decodeURI(foldersObjectArray[n].name);
          }
          return namesArray;
      },
      folderListItems = getFolderNames(folders),
      n = 0;
  
      st = w.add('statictext',u,prompt);
      ls = w.add('listbox',undefined, folderListItems, {multiselect:multiselect} );
  
      btnGp = w.add('group');
  
      koBtn = btnGp.add('button',u,'Cancel');
      okBtn = btnGp.add('button',u,'Select');
  
      koBtn.onClick = function(){
    w.close(0);
    }
  
    okBtn.onClick = function(){
    w.close(1);
    }
  
      ls.onChange = function() {
          okBtn.enabled = ls.selection!==null;
      }
  
      w.preferredSize.width = 450;
      w.alignChildren = ["fill","top"];
      ls.preferredSize.height = 200;
      btnGp.alignChildren = ["right","top"];
  
    okBtn.enabled = false;
  
      if ( w.show()==1 ){
    if ( ls.selection instanceof Array ) {
    n = ls.selection.length;
              while ( n-- ) folders[ls.selection[n].index].execute();
    }
    else {
    folders[ls.selection.index].execute();
    }
    }
  }
  
  var fo = Folder.desktop;
  fo.selectMultipleDialog("test", true)
  

  HTH

  Loïc

  www.ozalto.com

• Cannot open Lefthand Networks VSA / impossible to import with vConverter either! Help

  I'm putting in place the SRM in a dev environment, I have everything I need including the VSA_ovf_15108.zip containing the device, when I unzip and try to import in VMware Workstation, it will allow me, any ideas please

  WS 6.0.5? -UH - I doubt that this version vdiskmanager can manage ovf...

  You must either version 6.5 - or the stand-alone version of the VDDK - is the virtual disk development kit

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Creation of parameter: impossible to check the default values

  Hello
  I want to create new settings, and I want to give the user a set of default values. My problem is that for some fields, the 'default' value is available, but some other times this option is grayed out? Why?
  
  Thank you

  Hello

  I want to create some new settings and I want to give the user a set of default values

  the default value is only 1 and it is hard-coded.
  It is still available on the setting screen.

  My problem is that for some fields, the 'default' value is available, but some other times this option is grayed out? Why?

  I guess here, but when you say gray, do you mean the LOV are not?
  This list of values are called "Classes of elements" and that they are defined using the discoverer administrator, whenever an element class is defined, you will get the list of values for this element.
  You can read more about element classes here:
  http://download.Oracle.com/docs/HTML/B10270_01/item_cla.htm

  Tamir

• Lion - cannot create the master Director Open Fusion 4

  I can't promote a Lion Server to an Open Directory in Fusion 4 (running the latest version of the Fusion and Lion) master. The Lion VM Server just hangs. I tried NAT and Bridged mode, neither one allows me to complete the process. Can I promote a physical machine very well. I was wondering if someone else ran into this.

  What is a good way to troublehsoot this on the side of Fusion, i.e. balls I should look? I support that I recently bought 4 merge, I should open a ticket with technical support?

  Thanks in advance for any guidance...

  Hi lerker,.

  Your VM has only a single processor core is attributed to the?  It seems that Lion Server will create an Open Directory master, unless the virtual machine has at least two CPU cores allocated.  That problem is described in the Release Notes for Fusion 4 under Known Issues > guest operating systems.

  Adding a second processor on the computer virtual kernel must solve this problem, but note that, in certain circumstances, the Lion trying to create the master OD seems to enter the customer in an invalid configuration from which it will not recover - in other words, there is a chance that you will need to do a fresh install after it bumping to two processor cores (or you might need to do a job more than I does it try to figure out how to recover the invalid configuration).

  See you soon,.

  --

  Darius

• Hey can delete you the password option see the or just pop-out the master password when someone tries to push the button 'Show passwords' and not by launching.

  Yes, you know, such a cause of hassle when you open firefox, master password out. and without it, any person who borrows your PC can hack your accounts.

  Hello

  You can download the add-on from the elegant and use the style to hide the "show passwords" button .

• Do not open file pages

  Hihi,

  The documents I created with Pages is not opening. It was impossible to open only the oldest documents that I created less than a month back. But just yesterday, I created a new document does not open more.

  When I click on a document page, the app bounces in the dock and then more nothing. No error dialog box. Not nothing.

  I'm on OS X El Capitan 10.11.14, iMac mid-2010; Pages v. 5.6.1.

  Appreciate any advice. Thank you.

  SA

  I have a similar problem. I get more and more pages not opening not documents. I use dropbox and I wonder if this is the cause as it has some older posts (pending) on this.

• How can I open a custom theme keynote?

  When I try to open my kth cusotm theme I just get a choice to start a new presentation or add to the theme selector. I want to open the kth file, so I can modify it. IAM with Keynote 6.6.1

  Double-click the theme file and select the option of new presentation

  Open the master slide: View > modify master slides

  Make the changes you need and then either;  Save a presentation: file > save, or save as a new theme: File > Save theme