opening a saved wordpad file

Similar Questions

• Smartphones blackBerry how to open a saved .ipd file

  How open a saved .ipd file I saved my Blackberry to?  I washed my phone a few days ago and can not get to start over.  I was hoping to get at least a part of my Planner printed using this file.

  You can use the Fund Manager to restore the data in your BB

  http://BTSC.webapps.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB10339

  or if you want to display the data, you can use the magicberry ipd Editor:

  http://download.CNET.com/MagicBerry-BlackBerry-IPD-editor-and-converter/3000-10743_4-10962130.html

• XPS 13 end 2015 (9350) crashes when you open the saved first file

  Was able to change smoothly until a few hours later when it just froze and I had to force close it. I manually installed the same drivers for my integrated graphics card, and it worked! I was able to open the file being saved properly. Then, a few rendering problems came with flashes randomly when I saw my calendar. Nothing damaging but boring. Now, I can't open my file more and when I do my computer crashes and I am forced to shut down. What can I do? Thank you!

  XPS 13, i7, 256 GB SSD, Windows 10, 8 GB of RAM

  OK, so I went and back up the Application error frame home, that I then finished its task in the Task Manager. Works fine now.

• When I open a saved PDF file it stalls.   After 10 min, I close and try again the same result.

  When I open a PDF - registered Adobe Reader (not answer) and it it stalls stalls.   After 10 min, I close and try again the same result.  Sometimes it works for a few minutes, then it will start in neutral and I get nothing fact.

  What is your operating system?  Version of player?

  Can you open Reader by itself?

• Adobe Reader XI does not reopen saved PDF files

  XI player does not open the saved PDF files. Opens the PDF saved using an earlier version of the player. In Mac Help.

  Good news and bad news.
  The bad news is: PDF files are permanently damaged, and you need to remove them.

  The good news is: you can avoid this happening again.

  Download the installer ollfine Reader 11 here: http://get.adobe.com/reader/enterprise/

  Save the DMG - DO NOT climb or run Setup yet.

  Quit Safari.

  Go to: Mac HD/Applications

  Basket of the Reader 11 application from here

  Go to: Mac/HD/Library/Internet Plugins

  Trash the AdobePDFViewer.plugin file

  Trash the AdobePDFViewerNPAPI.plugin file

  Empty the trash

  Mount the DMG and run the installer from the reader.

  Open Safari and go to: Safari > Preferences

  On the Security tab, make sure 'Allow all other plugins' is checked.

  You can now redownload previously "damaged" PDF files and they will be open.

• Is it possible to have TWO Wordpad files open at the same time?

  It is possible to have TWO working Wordpad files open at the same time?  I tried 'cutting' nothing doesn't.  With Windows XP, it wasn't a problem...

  Thank you...

  Totally forgot the thing to-do bar, you can also a way to click on it to open a new

• Problem: Opening loss of saved job file in Illustrator

  I have a computer that deals the Illustrator oddly. My student records his file, he shut up and quit unexpectedly on Illustrator. The next day, back in the classroom, she opens his folder and is absent from work since the day before. What happened to 4 - 5 times this year. It's happened on other computers as well, but students may have screwed up. This student's attention and I'm starting to think that there might be a glitch in Illustrator.

  We are working on the iMac with Yosemite and the latest version of Illustrator CC

  I worked with Illustrator since 1988 on a daily basis. The few times where that has happened was the operator error of savings under the same name of file to another folder and once was a problem of the server (using a mac on a windows server) cache and the file showed correct within a few hours. Servers are a lot better now and if you waited 24 hours and the file appeared correct then you know you have a rare server problem (the distribution and duplication of the RAID were to catch up).

  If you had to open the file and the layers have been flattened and embedded images, it is a technical problem that opens the .pdf half the file rather than half when registering with pdf compatible with .ai.

  I can understand how someone who takes care of that you would trust their file management skills more than other students, I don't know any of them so am impartial. Rather than seeking a glitch in Illustrator, I recommend that you search the problem completely. Not to incriminate a student, but to show them the steps you would take in the professional world.

  1. Search the entire disk, server, shuttles USB drive connected to the same or similar file name.
  2. Check the file modification date against when the student says that they have saved the file. Make sure they know all about this region.
     
  3. Check the server the day following the date of modification, and if the contents of the file have changed.
  4. Teach students effective world real file naming conventions, so who have backups incase their file is corrupted or power failure. Most of the agencies only have to register with a 01 to the and increments for each revision, dragging old versions in a folder named previous or similar.

  The printing industry is very competitive and saturated. Giving students of file management and troubleshooting skills are essential to their ability to find a job in this industry.

  Feel free to come back, but please provide some screenshots or variables to use, than without and the facts will be difficult to help you know what is happening.

  Have faith well, Illustrator is not perfect, but save and do not open with updates files are very rare and I find a positive attitude and cool head is important to have.

• Some but not all of the saved pdf files will be opened in Mac Maverick.

  Player 11.0.7

  Have you tried previous readers available online but same story - they download OK but saved the file does not open.

  error message:

  

  Shippers say no problem with files.

  for example: http://isailor.us/faq/i/Transas_iSailor_User_Manual.pdf

  Can anyone help?

  The Adobe Reader toolbar will appear if you move the mouse in a PDF document being viewed in Safari.

  The link that you must click on isn't in the PDF itself. It's on the page BEFORE, the one where you click to view the PDF file. Does not always work.

• Cannot open Photoshop saved the RAW file in Photoshop...

  I got back from my school library, where I was using one of the scanners to scan my negatives. I scanned the files directly in photoshop CS3. In hindsight, I would have absolutely saved in tiff format, which has worked before, but this time I saved the files in raw. It is Photoshop raw, not Camera Raw. I assumed that I could open these files on my computer at home (Photoshop CS4), but apparently I was wrong. If I try to open raw files, I get a dialog box called "Photoshop Raw Options" and if I tap 'OK', it tells me something about missing color profiles, so I give myself a picture of grey noise. If I change the settings in the dialog box (the files have been saved to 16-bit grayscale with Mac byte order), I thought that "specified image is larger than the file", and I can't open the image.

  What is going on? Why I can't open in Photoshop files I just recorded in Photoshop? My past few hours have just been a total waste?

  jbz2105 wrote:

  My past few hours have just been a total waste?

  Yes, well enough, unless you know the exact size and can correctly fill required dialogs required to open a "raw" Photoshop file. You've discovered that the 'raw' format isn't related at ALL to Camera Raw. It's really a support to the format in the early years, used at the time where there weren't some formats of files available on some computer systems... and Yes, you SHOULD have used TIFF.

• Windows is unclear, said program to open the saved favorites

  I've saved my favorites (saved) according to your instructions on desktop as a .json file.

  When I tried to open to check, Windows says that it cannot open the file cos he needs to know what program I want to use to open it and gave options to use the web to auto select or choose from the list of programs.
  I don't know what to do.

  Note that you can restore a JSON backup in bookmarks (library) Manager.

  • Bookmarks > show all bookmarks > import and backup > restore > choose file

  Restore a JSON backup will replace all current bookmarks.

  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  You can open such a JSON file in Notepad (Firefox/tools > Web Developer) If you want to look at the file.
  
  Use file > open the file in Notepad and click the print enough to format the text for easier inspection.

• Open / convert .cwk drawing file into something else than Clarisworks

  Hello

  I have a problem and can't seem to find a solution.

  I have over 2000 + cards of Member (with images) stored in Clarisworks (.cwk) drawing files. Each file contains 10 cards of members with a photo that could be printed on paper card and laminate to make a membership card. so I have more than 200 of these drawing .cwk files.

  I need to be able to open these .cwk files in another program or convert them to another program that is not interrupted so that I can entrust the task of taking every photo, cropping and at a savings. JPG file with the dimensions of the specific pixels.

  I can't currently entrust this task as no one can open a .cwk file...

  Does anyone know how to open these drawing .cwk files in another program or convert them?  I found ways to open documents to simple text but nothing that can open files of drawing .cwk with embedded images.

  I also have access to an old Mac with the program of Clarisworks to open these files... Is it possible to convert it into a usable format more updated using this program?

  See you soon,.

  Duff

  I have something to play with, but I can suggest that if you have a computer OS x can open AppleWorks, you probably can click on the picture, copy it and open preview and place n command to create a new file of the image in the Clipboard, and then save it in a file with the name of the person.

  Preview will have the added benefit of saving to any size compatible format and file you want.

  A good workflow would be to create an empty (white) image in the right size, the resolution format and file preview and paste it into that. You should get the handles on the image to be able to resize to the borders of files. And then do a record under. Organize a list of parallel text of the names of all card holders, so you can save typing (and errors) to copy and paste into the names of image files.

  There may be other solutions you can think of that work better in practice once you have made a few.

  Peter

• a 16 bit saved TIFF file does not work in ImageJ

  Hello

  I have a camera that records a 12-bit TIFF file.  When I have a saved TIFF file, it can be opened in ImageJ and all pixel values are preserved.  Also, if I display in Labview using IMAQ, it can be displayed properly and if I use ImageToArray, all values are correct too.  However, if I save it in a new file using written IMAQ 2 file, the saved file can be loaded in Labview with the correct pixel values, however, if I open this file saved in ImageJ, all the values are converted to 16 - bit wrongly.  For example, the value 62 (00111110) becomes 1000000000111110.  Apparently, the first figure when converted to 16-bit, it designates the first bit to 1 instead of 0.  I'm confused because the same saved when the image loaded into labview vi, the value is 62.

  Is it possible to fix it?  Could this be a problem with ImageJ instead of labview? I joined the original file and save the file here.

  Greetings, Charles;

  After looking at the attached screenshot, I have a question for you. Which is currently connected to the IMAQ Create for Source2? I guess it is an enumeration with I16 selected, correct?

  The same thing happens if you use U16 times on LabVIEW and ImageJ, or any lower bit depth? Finally, if you save the image to a different file format, you get similar behavior?

  Best regards;

  Simon P.

• "There was an error opening this document, the file is damaged and could not be repaired." by e-mail

  I get "there was an error opening this document, the file is damaged and cannot be repaired." Sometimes it works, but more often than not I get this message when you try to open a PDF well my IMAP email server. I also have the latest player adobe downloaded on my computer and I have run Norton 360, which is to day saying my computer is free from any malicious dishes. Help, please!

  Hello ErikAtkinson,

  You can try saving the PDF file on your desktop before trying to open it.
  See if that helps with corruption problems.

  If this isn't the case, then I suggest that you post in the forums Adobe for Adobe Reader. I have included a link below:
  http://forums.Adobe.com/community/adobe_reader_forums

  They better be able to help with their product.

  Sincerely,

• I accidentally deleted important information in a wordpad file. Is he still go to the version of Windows XP 2 days ago

  I accidentally deleted important information in a wordpad file. Any way to access the version of 2 days there in the home version of windows XP?

  Original title: wordpad deleted info

  Assuming that you open the file in WordPad, made deletions and then have registered under the same name, there is no practical way to retrieve the previous version, unless you have created a backup (NOT a system restore point) until then.

• Impossible to open it in WordPad. How can I solve this problem?

  I'm trying to print old wordpad files and my Windows XP says this Word 6.0 file.  So, I can't even open the files.  How can I solve this problem?

  Then you must use Microsoft Word - not WordPad...

  Word Viewer should work.

  How to obtain the latest Word Viewer