Operating system recovery discs repairs

Similar Questions

• operating system recovery disc

  My husband swears it's a bargain: he brought a laptop for my son, for sale. He did not have any copy of what anyone, including the operating system...

  How to create a backup disc of /recovery where my son's computer crash. I expect it to do that very soon.

  Contact the manufacturer of the laptop; read the information below:

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

   

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Can't reinstall the operating system recovery disc

  Hello, I'm trying to reinstall the os from the recovery disk by pressing F12 and boot from the CD drive, but I get something like the following:

  From Windows 98
  Microsoft RAMDrive version 3.06 C: virtual disk
  Not found CD/DVD-ROM discs.
  some files are in charge.
  Try to drive PCMCIA Mont - please wait...
  Device not found driver: "TOSCD001."
  Invalid device CDROM drivers selected
  Bad command or filename
  Unable to copy the CD to RAM-drive C: drive!
  Press and any key to continue...

  After a touch all get them is a prompt C:\ >

  Any help would be greatly appreciated.

  Hello

  Can I ask you what phone you have?
  Have you tried to boot from the external PCMCIA CD/DVD drive?

• Replacement of the HARD disk on Equium A100-337 - installation of operating system recovery disc?

  Hello

  I have a Toshiba Satellite A100 - 337 Vista Premium. Unfortunately, the HARD drive died in it and it is out of warranty.

  I have the recovery CD and it have used before so know this works.

  I intend to put in a HARD drive replacement, but looking around, I can get a much better deal on something like maxtor/WD/seagate.
  It would be a problem for the recovery CD?

  In addition, the original disk is 60 GB - but if possible, while I replace in any case, I like to put in a bigger. What worries me is if the recovery CD is for 60 GB image pre - and then the rest of a larger HARD drive would be just wasted space? (if indeed it would even work in the first place)

  Someone else put in a brand/different size of HDD and used the successfully recovery CD? I have to admit not knowing much about how does the recovery process, pointers on that would be appreciated also.

  See you soon.

  A different size will be fine. Not sure about the different makes it well, but as far as I know, as long as it has the same interface as the original HARD disk, and then you'll be fine.

  A Yes, the recovery works on a more than 60 GB HARD drive.

  I hope this helps.

• Removes really all the information from the old operating system recovery disc?

  Hello!
  I wanted to know if the recovery disk that came with my Toshiba computer deletes * all * the hard disk information, * or is it possible, which has damaged the malicious software that was installed on my computer sometime before resists after using the recovery disk? *

  "If I use my drive recovery the program just wonder if I wipe my hard drive and informs me that my data will be destroyed if I use this recovery CD. After this issue alone, it begins with the recovery process. Is ' normal for this drive, he'll ask me any other questions on "what partition will recover and so on and it starts recover after this issue alone?

  What Toshiba drive cleanup could I use the case, if this recovery disk deletes all old information from the hard drive to ensure that * all * of my last hard drive is wiped clean?

  Thanks for the reply!

  Hello

  If you use the disk recovery Toshiba, all data will be erased on the HARD drive.

  Before the start of the resettlement, the HARD drive will be formatted. Malicious software and other software will be deleted.

  So you n t need another drive or another program to erase the HARD drive.

  Try it and you will see that it works. But first, back up your data.

• can you use an identical operating system recovery disc to restore another os?

  My girls both have a Dell inspiron 3520 windows 8, 1 has crushed no backup or restore points / were leaving that I can use the usb to recovery, I did the OS to work to restore the 1 crashed?

  Thank you Mr President, I have advanced and tried before your answer, and it happened as you say it and open Sys. R,... ty for posting!

• during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

  Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

  You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

  Hope that you made the backup recommended all of your data before attempting to install Vista SP2.

• System Disk Image recovery and system recovery discs discs

  These terms are very confusing.

  I had 3 HP computers to office over the past 15 years and have always comes to an ERD but my luck could escape and I'm going to need one of them.

  However, I'm confused.  I thought that as HP comes with a drive D: original Image, it would be enough.

  I make records of recovery or system disk Image?  Are they the same?  My HP Advisor on this computer again I do "system recovery discs!

  I would really like someone explain (in novice language) which mean the above and what I need to do?

  I appreciate so much people in the help forums, as I learned more from them than books I have.

  Twinkie3

  Twinkie3

  Hello Twinkie3, I suggest making the game to restore HP Recovery disks.  Even if you have the recovery restore D: hard disk partition, it may be damaged or if the hard drive fails and needs to be replaced, you would not be able to access the recovery partition.

  If you have to replace the hard drive, you can only insert disc 1 of the the recovery set and put the system back as it was when shipped. Without these records, you would need to try to acquire at HP for a cost to you, and after a while, they are not available.

  The set of recovery disks cannot be done once and only be used to restore your particular system.

  Normally, it takes 3 DVD discs but can take longer depending on the size of the restore partition.

  The HP advisor don't constantly remind important you to these disk since it's a step in maintaining your system over time.

• HP system recovery disc for the PC HP Pavilion?

  I press a dozen HP desktop systems.  In my software collection, I found a three-disc set of HP system recovery discs that were not labeled with a hint of the association of the system.

  The discs are marked by these numbers = 5012-0414, 5012-0415 and 5012-0416.

  It would be helpful if someone can tell me which PC HP Pavilion, these discs are designed so that I can either label or throw it out.

  Thank you very much for the time and effort to help me!

  Hello:

  According to this, they go to a HP Pavilion HP 8750 C.

  http://www.com-com.co.UK/basket_enquiry.ihtml?PN=4500078 ~ add = Y ~ cs = CL_availability_link

• How can I create an object for the vista HP 64 bit operating system installation disc?

  My PC shows signs a failure and I want to save my 'operating system', so I can "reinstall it later." Everything I saw in the forums are just consider my manufacturer. My Builder can not handle make me backups. I had to send them back 7 DOA (dead on arrival) and they never gave me a working copy. So in the end I just receive a refund. and geeksquad is way to expensive. so, how do I go about creating a disc of resettlement?

  Also the backup center and repair is more than the option to backup my operating system.

  Hello

  If you have a recovery disk partition hard HP are the people to contact about this

  It's their recovery partiton not microsofts

  and they have their own special way to make the recovery partition recovery disks

  If as you say your backup centers is not more work you can use 3rd party software to make a complete picture pc

  http://www.Acronis.com/homecomputing/products/TrueImage/

  or if you just want to reinstall a new copy of vista, read this:

  borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  then get the hp vista drivers

• How can I create on my Acer system recovery discs?

  I need to store window 7 onDVD (back-up for window 7) for a brand new with Windows 7 operating system already in computer

  
  

  I compurt any new branch (ACER expires), already having Windows 7 installed. They advised me 1st step is to have a back-up for window 7.

  I want to do it myself, I began to use the computer again.

  • Can you send me guide/steps to store my window7 on DVD?
  • How many DVDs I need, I have a box of 4.7 GB dvd, so 4-5 enogh?

  Thank you

  Rafid

  When you use the Acer software to make records of recovery, 4-5 should be enough.

  Acer - create recovery discs:

  http://Acer.custhelp.com/app/answers/detail/A_ID/12866/kW/recovery%20disk

  Your Acer computer includes an eRecovery Management software that allows you to perform operations of restore directly from your disk hard drive , which allows a faster recovery process and no need for discs. eRecovery Management does, however, allow to create recovery discs. The recovery disks will allow you to restore your computer something happened to your hard hard disk .

  Note: According to Acer computer you have your eRecovery Management version may be slightly different, but the ability to create your discs will be available.

  To create your recovery discs backup follow these steps:

  1. Click on the Start menu, and then click all programs.
  2. In the list of programs, click the Acer file, and then click the Acer eRecovery Management .
  3. User account control Windows may request your permission to run this program, click Yes.
  4. In the Acer eRecovery Management window left click backup, and then click create a default disk factory.

     Note: If you use a laptop or netbook, you will be asked to connect your power adapter, make sure that the power adapter is plugged in before continuing, and then click OK.

  5. In the page to create a default disc factory select the drive you want to use for burning the recovery media, and then click Start.
  6. The disc is ejected whenever he has completed burning, if several drives are required insert a new disc when you are prompted, and then click OK.

  What makes a system image is another option, but it will usually more then 4-5 DVD.

  Create a System Image in Windows 7 before installing
   
  You can make an image of your installation of Windows 7 system and it allows to restore Windows 7 to its state when the image was made.
  1. click on the Start Menu and type "Save" then click on back up your files.
  2. then click on create a system image.
  3 select the location where to save the image of your system, and then click Next.
  4. check your discs to back up, and then click Next.
  5. verify the settings, and then click Start backup to start.
  6. once the backup is complete, it asks to create a system repair disc, click Yes.
  7. Insert a CD or a blank DVD on the hard drive, then click on create disc.
   
  How to restore Windows 7 from a System Image
  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• G20-114: Re-install operating system recovery disks

  I have a 114 G20 with two drives hard sata 100 GB and recently reinstalled my operating system. The way I put in place, it is that I have XP MCE and all programs on a drive (drive C) and all my documents and given the other drive (drive D).

  Reasonably enough is for that if I need to re - install the OS I can keep my data on my D drive and reformat and recover on the C drive. However, in practice I couldn't do this job.

  To use my data while reformatting, I had removed the D drive and plugged into another PC. Try now that you want recovery disks would not begin their process with a single disk in the machine. The recovery work that once I had replaced the second disc in the machine.

  In addition, once begun, she insisted on the restructuring of the two drives before reloading the OS, despite me setting the raid option to two independent hard drives. Fortunately, my natural recovery disks distrust had caused me back up my drive D on an external drive, so I do not lose anything, but I would prefer not to have to do it again if I ever re - install Windows from scratch, as it seems to defeat point of two drives and keep the applications and separate data.

  I'm guessing that it is something else, that I was wrong or that it is necessary to have both drives up something to do with the process requirements raid as part of the recovery.

  So someone could tell me if it is possible to perform a recovery with a single disk in-situ, or without recovery wiping both discs and if so, how.

  Thank you very much.

  Hello

  Well, I think that it s because of the RAID drivers on the Toshiba Recovery CD. This CD is designed for use with two hard drives.
  If you want to use the Toshiba Recovery CD so that the two HARD drive must be placed in the unit.

• System recovery disc set

  Hello

  I have a Pavilion dv9925nr, part number; fe695ua #aba and I would like to get a set of recovery disks.  The original operating system was Windows Vista 64-bit.  Thank you!!

  Jason

  Hi, Jason:

  You can contact HP technical support and see if they still carry a set of recovery disc for your model.

  If this isn't the case, you can get a set of this provider on the link below.

  http://www.computersurgeons.com/p-15640-recovery-kit-483907-003-for-HP-model-number-dv9925nr.aspx

• HP operating system / recovery disk

  Had a HD failure model has a new 1 TB HD, was not able to load my (drive purchased HP) said material would not complete the Installation.  Has brought a Window Vista 64 (SP1) disk Got Loaded Vista, but I am missing drivers (because they were not on the stand-alone Windows disk.  Any help would be greatly appreciated.

  HP Touchsmart IQ 505 COMP

  Thanks in advance

  Main concern is network controllers (drivers)

  Driver Realtek ethernet

  Help

  It depends what you mean by "Fancy HP Software"... pilots and most, if not all, of the software included with the computer can find on your HP recovery disks. Just insert disk #1 and look in the folder "HP". You should find a driver and an application folder inside. There are records of installation and/or files contained there and you should be able to run the 'setup.exe' for each application or driver.
  
  Anything else you might want will require using the HP recovery discs to reinstall the factory operating system and all software. Yes, I understand that you cannot complete the installation and it is probably due to your new HARD drive is a 'Advanced Format' disc that came out after Windows Vista was released. With the help of a non - drive AF will solve your problem. You can also install a newer SATA storage controller driver allows to cure the issue. Try searching on the net for the accurate OFT of the messages received.
  
  Please send Bravo

• Create a system recovery disc?

  Hello

  My girlfriend just got a Probook new 6460 b (what she ordered to hp.com) with Win7 Pro and she wants to create a system for her recovery disk.  We have been able to make a 'system' repair disc, we found it under start > Maintenance, but I am sure that this is not a complete system recovery disk.  I found the following link: http://support.hp.com/us-en/document/c01895783 . But his computer does not appear to have installed the HP Recovery Manager.  She also received no recovery discs.

  How can we get the recovery disc for this computer?

  Thank you!

  None of the professional laptop computers come with a recovery CD set more

  Anyway, if you live in the United States or the Canada, here's how to get a set of restore for your PC disks:

  1. Enter the reference number and the serial no on the underside of the computer on the tag.

  2. call HP at 1-800-952-7689, option 1 (ranking in the list in the option made restore disks).

  3. provide the information asked by the representative who answers the phone.

  4. do you have a Master Card or Visa ready for purchase. They do not take discover. I believe that you will be charged $10.00.

  You will receive the discs by first class mail, or you can pay an additional $10.00 for shipping FedEx.

  Alternatively, you should be able to Access Manager (dvds aren't needed) recovery with a F11 key at startup

  To do this, just restart it, to the hp bios screen, press f11 and select recovery