OPV with distinct values for the guests

Similar Questions

• Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.

  I was wondering if I saved a layer somewhere and set it as a default value.

  If you group the layers, you will be left with a single layer, thus spreading your concern.

  Suggest that you do the following:

  1. Make sure you have the latest drivers for your printers
  2. Reset the default preferences.

  Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.

  Items nearby and let regenerate the file.

• Import of CSV with loop value FOR

  Good afternoon

  I'm new to LabView and trying to write a VI that will eventually run a set of calculations on a set of data with millions of data points. I want the VI to count the number of data imported points of the. As they are written to a CSV file array. The number of points eventually will help me determine the behavior of the end of my calculations, it is not optional.

  I have trouble getting the file to read each successive line. The value 'for the iterations of the loop"feeds into the 'start reading Offset' «Worksheet File.vi reading» My intention was that this would result in a new line being read in the table with each iteration of the loop. What I get is the first value read over and over again in the first row of the table. Any ideas?

  Thanks for your time and help,

  Wes

  JWTyler wrote:

  I read it one line at a time so that the iteration of the loop is incremented at each line, to give me the size of the sample.

  Is there a better way to count how many points is imported? I could not find another way...

  There is a beautiful VI called "Table size" which will also do for you.

• Essbase Warning (1023135) skip certain values for the replication

  Hello
  
  When you replicate the complete data of a partition Essbase BSO in Essbase ASO (11.1.2.2),
  thousands of warning messages are logged in the application log:
  
  "Warning (1023135) skip certain values for the replication.
  
  The partition (data of level 0) valid and the counties of cells in each area are exactly.
  
  No idea of the possible causes and consequences?
  
  Thanks for your help.
  
  Philippe Cuisset

  Hello

  Thanks to the contributors.

  The contours of the source and the corresponding target, with the exception of 3 members with different names in the source and target.
  My score has 2 spaces for these 3 members. Mapping advanced between the names of source and target members has been set in a field, but it was missing in the other (not detected by the validation of the partition!). I don't set it too and now no more warnings.

  Philippe Cuisset

• [ADF, JDev12.1.3] (How to set values for the attributes 1) to create a file and 2) committing to the database?

  Hallo,

  in my tables and forms (created from VO istances) there are some areas for which, insert and update, I calculate and set the value programmatically when a record is created or updated.

  In some cases, I put the necessary values using the 'CreateWithParams' in the workflow diagram...

  

  In some other ones, I associate an action, a bean, a created button drag-and - drop operation 'CreateWithParams' of the istance VO...

    public String cwpButton_action() {
      BindingContainer bindings = getBindings();
      OperationBinding operationBinding = bindings.getOperationBinding("CreateWithParams");
      // here I calculate and set the needed params
      // ...
      Object result = operationBinding.execute();
      if (!operationBinding.getErrors().isEmpty()) {
        return null;
      }
      return null;
    }
  

  And is ok if I can calculate the values for the attributes before a new record is created.

  But the approach that I have used to define the attributes (for new and updated records) whose value should be caluclated after the user has filled in the fields, before committing to the database?

  Thank you

  Federico

  Federico,

  Let me first tell you that our code is activity masking errors (the cache instead of working on them).

  1. If (! operationBinding.getErrors () .isEmpty ()) {}
  2. Returns a null value.
  3. }
  4. Returns a null value.

  This means that you do not check the errors at all. You must at least print a log with the error message, you receive, if you get one!

  To solve your problem, you override the method prepareForDML() of the entity or entities in question. You can calculate and set the necessary attributes until they get engaged in the doDML(). Do not use doDML() because it is too late in the life cycle.

  Timo

• How to add the default value for the "Full - Text Search" box

  Hi all

  I am looking for the ability to add a default value for the "Full text search" box in the search form.

  Example:

  When the user accesses the search page it get default values for some fields (defined in the rule as default values) such as

  xField1 = txt1 and xFiel2 = txt2.

  and Furthermore we need full-text = Hello world.

  Is this possible?

  Another way that we use is to open the search by URL with coreContentOnly = 1 as a form:

  http:// < Server >/cs/idcplg? IdcService = GET_DOC_PAGE & to Action = GetTemplatePage & to Page = STANDARD_QUERY_PAGE & coreContentOnly = 1 & to xField1 = txt1 & to xFiel2 = txt2

  It is possible to add full-text criteria here? Somethig like: & text = Hello World

  Thank you

  Leon

  It is not possible in a very obvious way, not to mention that it is a rather strange request.  I can't really imagine a realistic use for this case.

  Anyway, without a messy customization, you should provide a default query with an FTX inside element text setting (i.e. "IdcService = GET_DOC_PAGE & Action = GetTemplatePage & Page = STANDARD_QUERY_PAGE & QueryText =Hello World" "")

  To do this in a profile in the secondary effects of the profile section, add the following:

  <$dpPromote("QueryText",>Hello everyone") $>.

• A combine with other values of the column, the column values

  
  Hi all

  I need your help on this. I have a req I need to combine values of a percentage to the values of column test column. Here are examples of data

  Select decode('test',null,'ABC') abc, b.percent, b.amount

  from tableA, tableB b

  where id = b.id

  Examples of data

  Amount of the percentage TEST

  ABC              0.3                10

  ABC              0.5                20

  ABC              0.2                30

  After him combine the values of percentage to the ABC percentage column values must be zero

  Desired output

  Amount of the percentage TEST

  ABC(30%)                              10

  ABC(50%)                              20

  ABC(20%)                              30

  Valuable suggestions are appreciated

  Alter the query from Etbin with a trifle for the exact release.

  with

  t as

  (select 'ABC' test, 0.3 percent, 10 amount of all the double union

  Select 'ABC', 0.5, 20 double Union all

  Select 'ABC', 0.2, 30 double

  )

  Select test | ' ('| to_char(100 * percent) |'%)' test, null as a percentage, the amount

  t

• Default value for the select list of type of form elements

  Hello
  
  I do not work with Apex that mutch, so this may be a simple question... but I still need help.
  I have a form, in this form, I have a question P19_ONTVANGER_ID, this is based on a LOV.
  This LOV is on a table that has a field of username with the value of APP_USER.
  The table looks like:
  ONTVANGER_ID this is the PK and is going to be the return value from the LOV.
  NAME is the display value for the LOV.
  USERID is the column APP_USER.
  
  What users would like to get is that if they create a new record, the default value for the P19_ONTVANGER_ID field is their own ONTVANGER_ID.
  But they must also be able to select another user.
  
  hope there is someone out there that can and will help me.
  
  Kind regards
  
  Rob
  
  APEX 4.0.2 Oracle 10

  Rob-v-M-Gn-Nl wrote:
  Until now, I had, but I need to select the value of the id of the table and the list of selection item appears the corresponding value.

  How can I do this?

  You can select the Type of default value as the body of the PL/SQL function

  and to add something like that

  declare
  v_return number;
  begin
    select your_id
      into v_return
    from your_table
    where some_column = :APP_USER;
   return v_return;
  exception when no_data_found then
   return null;
  end;
  

  http://www.asktheoracle.NET/PLSQL-function.html

• Increase in the Allocation of disk space for the guest system

  I use v.6.5.2 from workstation.  I have a lot of excess space on the hard disk of the host system, but with hindsight I initially did not award a sufficient amount of space for the guest system. Is there a quick (and painless!) way in which I can assign storage drive increased the operating system invited without workstation removal and re-Assembly of?

  Biggar Gordon

  Houston, Texas

  If you are just looking for elements run back, I wouldn't have selected Vista for guest OS... Probably be much better to use XP Pro (SP2) than any version of Vista... On the one hand, XP uses much less space on the disk and other... You can run XP Pro (easily) on a vDisk 16-20GB... IF you're dead set on running VIsta, then get the Business edition and who perform. I would never use any of the editions home for any professional use. Windows 7 is much better than Vista (Windows 7 is commonly called "Vista done right" within the it community). I'm actually using Windows 7 Professional x 64 on two of my systems. I have a XP Pro VM on my system main for when I need either the software which is only able to turn it on, or when I need to test something. Otherwise, I stick with Win7 these days.

  Vista Home (Basic or Premium) are not exactly the wisest choice for operating systems... Especially if you work on this system...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• Parallel logic LSI, LSI logic SAS, parallel Buslogic (not recommended for the guest operating system), vmware paravirtual

  Infrastructure:

  vSphere

  ESX 4

  Reference Dell R710 Server

  I install WIN 2003 x 64 as a virtual server on ESX 4, when I select LSI logic SAS & LSI logic parallel it does not detect the hard drive, do I need driver if so where can I download?

  For parallel bus logic (not recommended for the guest operating system) & Vmware paravirtual, do I have to select this option for my win 2003 R2 x 64 edition?

  Please help on this issue.

  ~ Rashid

  If you really want to use it for installation, you will need to extract the driver from the VMware Tools ISO and add it to a disk image.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• Username or password for the guest OS

  Hello

  HostOS: Ubuntu 8.10

  GuestOS: Windows Server 2003

  I'll build a regression test environment and I need to be able to use the command line to start a virtual machine and discover its external IP address so that I can query a database that I have stored on it.  I am able to start my virtual machine to the command-line help:

  vmrun T - h server http://127.0.0.1:8222 / sdk runProgramInGuest u '[local] Integrated Testing VM/winnetstandard.vmx' C:\Windows\system32\ipconfig.exe

  fails with a ' error: username or password for the guest OS.

  I assure you that comments username and password I use are valid.  I tried with user domain\username, username, etc.  I installed the latest VM for the guest OS tools.  I tried connecting manually first guest OS, so that the VM tools to perform before I called vmrun. I know I can find the IP address of the guest OS through the section of the status of the web utility or by running the console OS comments; However, in my final project, users will only to have command line access.

  What I am doing wrong with my order of runProgramInGuest?  Or, better yet, is there a simpler way to get the IP address of the OS from the command line?

  I'm under VMServer 2.0 on Ubuntu 8.10 with a guest OS of Windows Server 2003.

  Thank you!

  I need to start a virtual machine and find the IP address signed by

  Check /var/log/vmware/hostd.log on the host

  Remember that if you use a format domainsername user then on Linux you need to escape the backslash so it would be the field
  username, if you have not indeed get you the error "invalid username or password for the operating system prompted". Similarly to the backslash characters in the path of the program to run in the comments and you must specify the full path.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Solaris comments vmrun always says ' error: username or password for the guest OS.

  VMware Workstation 6.5.1 build-126130

  Host Linux, Solaris 10u5 x86_64 comments

  No matter what user I try the vmrun will not allow user name or password for the guest OS to accept. I tried the root, a user, and I even tried to make a new user.  Any order requiring - vmrun gu - gp fails with ' error: username or password for the guest OS.

  Is there a journal file, or something that I can look for a specific diagnosis?

  This support is something that we are studying, but I can't give any kind of timeline.

  Certainly, you can file a request for assistance on our Web site.

  If you are more of a do-it-yourselfer, there is the open-vm-tools project on SourceForge, which leverages the VMware tools and includes the part of the code that implements the operations of comments. We'd love to take all the contributions to this project.

• How to find out the ASCII values for the Spanish character

  Hello
  
  I had an obligation to maintain the Spanish character and must also always records based on the Spanish character.
  
  Kindly guide me for below.
  
  To filter the records that contains Spanish characters?
  To get the ASCII values for the particular column?
  
  For example, we can find the ASCII value of 'a' using the select syntax ASCII('a') double.
  
  But I want to find the value of the particular column ASCII values. That is to say. name.
  For example, the customer name is 'Suresh', I want the ASCII values for the entire name of 'Suresh '.
  
  Please do the necessary help / advice on that.
  
  Thank you
  Orahar

  To expand on what I said in my first post, you want to do something in this direction:

  with t (thename) as
    (
    select 'Suresh' from dual
    )
  select thename
       , substr(TheName, level, 1)
       , ascii(substr(thename, level))
    from t
  connect by level <= length(thename);
  

  The result of the above query is:

  THENAM S ASCII(SUBSTR(THENAME,LEVEL))
  ------ - ----------------------------
  Suresh S                           83
  Suresh u                          117
  Suresh r                          114
  Suresh e                          101
  Suresh s                          115
  Suresh h                          104
  
  6 rows selected.
  

  Note that the WITH statement is only there to simulate a table for this example. With a table, all you do is get rid of the with and replace it with the name of "t" for your table name (also the name of the column with name column has in your table).

  Finally, I suggest that you post your question with, an example of table and the output you want for PL/SQL forum. There are people out there who will give you all sorts of ways to solve this problem.

  HTH,

  John.

• DEU-00014: invalid value for the setting, "include".

  Hi, I need to do an export of paintings from a schema and a particular query executed will apply to all the specified tables in "INCLUDE = TABLE: '('TBL1', 'TBL2') IN' in the command expdp.»
  
  Now, I get the question in this setting INCLUDE. I have about 200 paintings to be included and I add this parameter INCLUDE in a separate parameter with all table names 200 file in Informatics and with the help of this parameter file in the expdp command.
  
  Error message I get:
  DEU-00014: invalid value for the setting, "include".
  
  When I use the same process for 2 tables, this works very well. I think that there is a limit to the number of characters that can be used in the INCLUDE parameter. If so, then how do I use expdp to select only those 200 tables of 500 paintings in my diagram. I'd appreciate any help on this. Thank you.

  Hello

  I'm sure that the limit is 4000 characters, but there are fairly simple workaround.

  Create the table my_tabs (a varchar2 (30));
  insert into my_tabs values ('your_table_name');
  Repeat this step for each of your 200 tables

  include = TABLE: "in ((SELECT from MY_TABS)) '"

  You may need to mess you with the quote, but the value you were using is just an expression. It is only by using a different expression.

  Dean

• Recommended value for the BAM data expiration time

  Hello
  
  Can someone tell me what is the recommended value for the BAM data expiration time?
  
  Enterprise Server default is 24 hours, but I would like to be able to raise the average runtime instance after several months. Is it reasonable to the value of the time-out value a high value? Or it will have an impact on the performance of BPM/BAM?
  
  Thanks in advance.
  
  Best regards
  CA

  Normally, we keep the BAM data expiration time at halfway with 24 to 72 hours. For historical reports that you are looking for the Data Mart / Data Warehouse DB are more logical. This database stores the data forever and takes pictures at longer intervals, normally 24 hours. These data are not in time real normally then because a capture instant is only taken once per day but will give you historical reports that you are looking for. The data from this database structure is almost identical to the BAM DB.