ORA-44416: invalid ACL: 'APEX_040000' main outstanding

Similar Questions

• has received the error ORA-44416: invalid ACL, while trying to enable network services

  Hi guys I got the ERROR ORA-44416 after the activation of services network in 11 GR 2 to send emails, so I ran this command found just as shown below in the Oracle document library

  SELECT THE ACL, PRINCIPAL

  OF NACL, XDS_ACE ACE DBA_NETWORK_ACLS

  WHERE HOST = ' *' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL AND

  NACL. ACLID = ACE. ACLID AND

  ARE NOT (SELECT NULL FROM ALL_USERS WHERE USERNAME = MAIN);

  That returned a result of

  no selected line

  What could this mean

  The installation is done on a localhost and the APEX version is 4.2.2 browser is mozilla fire fox

  ORA-44416 means that the ACL that you tried to create to refer to a valid principle - that is, the user does not exist.

  The SQL code that you included above seems to be looking for associated ACL principles which are more database users. I don't see a direct link between this request and the ORA-44416.

  What was your original script of ACL?

  Also, because it is a question of database rather APEX you might get a better answer on the forums of the database.

• Strange ORA-01722: invalid number on viewCriteria

  Hello

  I defined in jDev 11.1.1.5 do with viewCriteria and everything works until I have migrate jDev 11.1.1.6. Now, I get this exception run this view

  < Utils > < buildFacesMessage > ADF: addition of the JSF error message: ORA-01722: invalid number

  java.sql.SQLSyntaxErrorException: ORA-01722: invalid number

  After a few experiences, I found that this problem is viewCriteria, which is not so simple. It is used with condition NOT IN subquery.

  (P_P_ID_FK NOT IN (SELECT P_ID of P where NVL (VALID_FROM, CURRENT_DATE) < = CURRENT_DATE))

  I know that DOESN'T look good is not standard in ADF viewCriteria, but SQL work well. So tell me why there at - it SQLSyntaxErrorException!

  When I remove that part or AppModule viewCriteria viewCriteria, then everything works.

  Exception disappear even when I move the condition NOT IN with the main request viewCriteria subquery.

  I tried to rewrite viewCriteria using NOT EXISTS, but there is no possibility of query from same table due to the inability of aliasing table names.

  You have a work around?

  Thank you.

  Problem is resolved declaratively by manual editing of XML view this tutorial Andrejus Baranovskis Blog: implementation of criteria seen in Colombia - British ADF

• Session beginning of OGG-00664 OIC error (status = 1017-ORA-01017: invalid)

  All,
  
  I make a problem while doing the initial load process.
  
  ENV-
  OEL32, 11.2.0.2 - SOURCE AND TARGET db TIME on a machine.
  -------
  
  
  GGSCI (localhost) 7 > discovers the eini13 report
  
  
  2011-10-31 16:49:51 INFO OGG-01017 Wildcard resolution IMMEDIATE value because SOURCEISTABLE is used.
  
  ***********************************************************************
  Oracle GoldenGate Capture for Oracle
  Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
  Linux, x 86, 32-bit (optimized), Oracle 11 g on April 30, 2011 22:35:14
  
  Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
  
  
  From 2011-10-31 16:49:51
  ***********************************************************************
  
  Version of the operating system:
  Linux
  Version #1 SMP kills Jan 4 07:23:44 this version of 2011, 2.6.18 - 238.0.0.0.1.el5
  Node: localhost.localdomain
  Machine: i686
  limit software
  Address space size: unlimited unlimited
  Heap size: unlimited unlimited
  File size: unlimited unlimited
  Time CPU: unlimited unlimited
  
  Process ID: 4845
  
  Description:
  
  ***********************************************************************
  * In the course of a run with the following parameters *.
  ***********************************************************************
  EXTRACT EINI13
  WEST OF USERNAME, PASSWORD *.
  
  Context of the source:
  SourceModule: [ggdb.ora.sess]
  SourceID: [/ scratch/sganti/view_storage/sganti_core_lin32/oggcore/OpenSys/src/gglib/ggdbora /]
  ocisess.c]
  SourceFunction: [OCISESS_try]
  SourceLine: [500]
  ThreadBacktrace: [12] elements
  : [/ apps/oracle/product/gg_amer/extract (CMessageContext::AddThreadContext () + 0 x 26) [0]
  x 8289366]]
  : [/ apps/oracle/product/gg_amer/extract (CMessageFactory::CreateMessage (CSourceContex]
  t *, unsigned int,...) (+0x817) [0x827fae7]]
  : [/ apps/oracle/product/gg_amer/extract (_MSG_ERR_ORACLE_OCI_ERROR_WITH_DESC (CSourceC]
  [(ONTEXTE *, int, const char *, const char *, CMessageFactory::MessageDisposition) + 0x8b) [0x824230b]]
  : [/ apps/oracle/product/gg_amer/extract (OCISESS_try (int, OCISESS_context_def *, char))]
  const *,...) (+0x376) [0x81cd156]]
  : [/ apps/oracle/product/gg_amer/extract (OCISESS_logon (OCISESS_context_def *, con char))]
  [(St *, const char *, const char *, int, int, int) + 0x8b4) [0x81ce604]]
  : [/ apps/oracle/product/gg_amer/extract (DBOCI_init_connection_logon (const char *, cha))]
  [(const r *, const char *, int, int, int, char *) + 0 x 58) [0x81bdce8]]
  : [apps/oracle/product/gg_amer/extract [0x81c23da]]
  : [/ apps/oracle/product/gg_amer/extract (gl_odbc_param (const char *, const char *, char))]
  [)) + 0 x 36) [0x81c29b6]]
  : [apps/oracle/product/gg_amer/extract [0x814bfec]]
  : [apps/oracle/product/gg_amer/extract(main+0x1dc) [0x81529cc]]
  : [lib/libc.so.6(__libc_start_main+0xdc) [0x476e9c]]
  : [apps/oracle/product/gg_amer/extract(__gxx_personality_v0+0x1c5) [0 x 8120491]]
  
  Beginning session 2011-10-31 16:49:51 OGG - 00664 OIC error (status = 1017-ORA-01017: invalid user name)
  / Password; connection refused).
  
  2011-10-31 16:49:51 ERROR OGG-01668 PROCESS ABENDING.
  
  
  GGSCI (localhost) 8 >

  Name of user and password invalid.

  Your GoldenGate database user named West (and whatever your password)? Also, check the correct cases 11g password is case-sensitive default passwords.

• SDO_LRS. LRS_INTERSECTION returns ORA-13331: invalid LRS segment

  I was experimenting with the LRS_INTERSECTION function by running
  
  Select SDO_LRS. () LRS_INTERSECTION
  sdo_geometry (3302, 8307, null, sdo_elem_info_array (1,2,1), sdo_ordinate_array (- 79, 37, 38, null, 0, - 80 - 79, 39, null,-80, 48, 100));
  sdo_geometry (3302, 8307, null, sdo_elem_info_array (1,2,1), sdo_ordinate_array (- 79, 39, 40, null, 0, - 80 - 80, 38, null,-79, 37, 100));
  20
  )
  of the double
  
  I get the following error:
  
  ORA-13331: invalid LRS segment
  ORA-06512: at the 'MDSYS. SDO_LRS", line 8496
  13331 00000 - 'invalid LRS segment.
  
  Somehow, I don't see what is not valid on either LRS geometries that I spent in the function. Curiously, if I change the last coordinate of the latitude of the first argument of geometry from 48 'to 40', I get no error. The problem is that I really want to calculate the intersection of geometry exactly as shown above. Does anyone have any ideas why SDO_LRS. LRS_INTERSECTION considers either the geometry of the values of parameter not valid?

  Hello lowlyscrub,

  You have discovered a 'feature' of LRS_INTERSECTION which is kind of a bummer in my opinion. The LRS specifying allows only valid geometries LRS consists of a single string, a multiple string, or a point. If happen you by the whims of your intersection receive in return a different set of geometries, then the LRS result is invalid and you get this error message. To see what I mean, the simplest method is to run your query, even using the good old SDO_INTERSECTION instead.

  Your intersection returns a collection of a linestring and point. Thus, this collection is not valid LRS and thus the error. Oracle Spatial people have said that this is normal. I think I asked that they better document this "feature" just now. LRS_INTERSECTION is a relatively new feature that came to 10.2.0.3 I think. Its main selling point was that it preserves the line intersected strings management. Before that, I used a wrapper utility SDO_INTERSECTION which then tested the results later and everything fixed at the back of the line channels and removed all the stray points. LRS_INTERSECTION is faster than my former utility. So what I'm doing now is I have a wrapper that submits entries to LRS_INTERSECTION, intercepts all 13331 errors and if he catches that he then submits the same entries in the old utility.

  I have indeed encourage you to put in a few comments through Oracle support on the issue. It would be nice to have a switch on LRS_INTERSECTION which could in turn allow these geometries LRS 'bad' for the correction by the user or that the utility itself remove these stray points.

  See you soon,.

  Paul

• Error downloading: digest of invalid signature for main manifest file assigns System.exit unauthorized calls!

  Hello fellow sufferers!

  I am trying to download my first application at BB appworld. While trying to download the file * .bar, I get this error:

  Digest of invalid signature for main manifest file assigns System.exit unauthorized calls!

  What does this errormessage?

  It's my MANIFESTO. MF file:

  Archive-manifest-Version: 1.1
  Archive-created-by: BlackBerry Tablet OS Elf BAR Packager 1.3.1

  Package-Type: application
  The author of the package: -.
  Package name: de.helex.clipmanlite
  Package version: 1.0.2.0
  Package-Architecture: armle-v7
  Package-author-certificate hash: _QCY8j3bSpt-67mhJLED-4xZooXxA7vZBMu2MbHI97SYlh5aoRxaHi44Ie-WMfh9-AGPG2YnwlW7X-AJ-A7xPQ
  Package-author-Id: gYAAgEPQ7F7MvQXnpyTXcW_b9KQ
  Package-Id: gYABgFYDI7fyWoGVx88_tVwB_Ic
  Package-Version-Id: gYACgHvOOTEXtanI-HRmZlA82u8

  Application name: ClipManLite
  Application Description: Clipboard Manager
  Application version: 1.0.2.0
  Request-requires-system: Tablet OS/1.0.7.0
  ID of the application: gYADgFZI5L0DEfspLgVvaOJ8kK0
  Application ID-Version: gYAEgIravTIRSld3gfNygimA3qI

  Name of the entry Point: clipmanlite
  Entry point: QML_IMPORT_PATH = app/native/import QT_PLUGIN_PATH = native/app/plugins LD_LIBRARY_PATH = lib/native-app app/native/clipmanlite - blackberry - platformpluginpath ./app/native/lib/platforms platform
  Entry-Point-Type: Qnx/Elf
  Entry-Point-icon: native/icon.png
  Entry-Point-Splash-Screen: native/splashscreen.png
  Entry-Point-focus: auto
  Entry-Point-System-stocks: run_native

  Archive-asset-name: native/clipmanlite
  Archive-asset-SHA-512-Digest: EgIFzXisCdbgWHASq7sSPYjSDWRzzl77_hw-TYnopqUjV9JDbRORwzCruReZOG2iq3SQv-Yi50NcD7XPHqz_Jw
  Archive-active-Type: Qnx/Elf

  Archive-asset-name: native/icon.png
  Archive-asset-SHA-512-Digest: MFqIlfKgqTrhI3yZkGZyv0l1YUubJblUMc6mhcZuhJfktqX5x-NwfWL7m-McGoKUMjgCTbFBSW1e3voCcZoBGg

  Archive-asset-name: native/splashscreen.png
  Archive-asset-SHA-512-Digest: CNzXgezPb8oKHCJ_4Zqk2_Fb1D6tkMVGEn3mhPQFRD7REdRG0ZnELLdu0gkM1pVvyObc0bH2ouv84_QwJ7kuLg

  Archive-asset-name: native/lib/libQtCore.so.4
  Archive-asset-SHA-512-Digest: 9gnZ149YG3kPs8ZFbHoZ6kFrL5dj4yW40urXd-uZPDrif0zYMzI29TUsp794U4GBiQUXaKKlbZOWUqIZlEHI9A

  Archive-asset-name: native/lib/libQtGui.so.4
  Archive-asset-SHA-512-Digest: EgYpcFf7xItFiqQ_PDm8FFVFu5vdbIrg4-h2d3sB-3FfPuAlnZasR_UQ45yNxzZoIwowtdaNVstIvVZXd7j1AA

  Archive-asset-name: native/lib/libQtOpenGL.so.4
  Archive-asset-SHA-512-Digest: is9HkVzh6mFpVs0N7LkYCH1Aps3pt-Q20XHP37jLnLPnoME4kl3hl9sCkCU1XCm-PchfoX51GxjMS9wBkSuMgA

  Archive-asset-name: native/lib/libQtNetwork.so.4
  Archive-asset-SHA-512-Digest: pP6tPwXFGmFQnYTuHn80aFV7xh8pG4y6wOWIIvGGlp4UXl570Gq5W3lbOuCGtCQKyPwPLc7bVOPuK3Ur8hf6SA

  Archive-asset-name: native/lib/libQtDeclarative.so.4
  Archive-asset-SHA-512-Digest: W2wS_9_9Cqqqio2w6251fhFnxnQm4ZY2COFm5xQQVCQwcMCvly2KmGxVruZO2yc_WN65MGeEOvH4cAAt1rOznQ

  Archive-asset-name: native/lib/libQtSql.so.4
  Archive-asset-SHA-512-Digest: 7H8cJrn5yhG3p4K3G4oYO8XWr_D_AZcLD5T9Zfn6mc8lUiyJ4o6mXouXmFC9imoMeUmq4KsTVM2AdhZStXA7gQ

  Archive-asset-name: native/lib/libQtSvg.so.4
  Archive-asset-SHA-512-Digest: dJk9FYrRJGqPeaEG17LWTKC_ogV6Few2BzK4t-WlcXUg0MJxinKp5jigsCHzFm6SJiFJLHDj3jRS16bTV12qgQ

  Archive-asset-name: native/lib/libQtScript.so.4
  Archive-asset-SHA-512-Digest: 809rAuYFWIOxeJuNJcL63URoMKXz6NKrmKOfZZWDjPUVqTJkxL7tBr_joHZR-EVY1mSJ8wBbh64iB6YdbqTmUg

  Archive-asset-name: native/lib/libQtXmlPatterns.so.4
  Archive-asset-SHA-512-Digest: zVw6F43U2TKa3dbYosygRliRlhdNisb-sdBmzh6AgTyh9GlVCkLLBie781GpQLA-uOyKpDOoT5B6N8h4ulaCBw

  Archive-asset-name: native/lib/platforms/libblackberry.so
  Archive-asset-SHA-512-Digest: uEdFgiXdWMo3MV5szE5vn2EcVXxubMZl4e71PT4z614ONV2ZqcFKzf6CFGzV9mwQGlWKm5Jrra71I2fzASnurw

  Archive-asset-name: native/blackberry - tablet.xml
  Archive-asset-SHA-512-Digest: mzIshm0x0oBMW7T-SlYg5ywvgFSeeHSyx53kkvzaf - WQWDtkbxqqXDldjCQrvYv631_2Q6OCAiYOmZRoslsYg

  Any ideas what could cause this error?

  First I thought maybe it's because the same mistake: what to do if your Package ID was rejected by BlackBerry App World

  But the creation of a new element of product does not help with this problem.

  It is a native application of qml Qt. It does not store the files, need to no write access and uses only simple, free of components created 1.0 QtQuick with no additives. So, it should be the best portable application out of my small collection.

  Unfortunately I have no real device here since I, like many of you, to present one of my tablet at BB App World Applications, first to get a.

  Google was not my friend on this topic, so I hope someone has this kind of error message and could tell me what could bring it. Any kind of advice are welcome.

  Best regards

  HELEx (Ambassador of Qt)

  FYI, a new simpler command allows to sign the 1 step:

  BlackBerry-sign - storepass .bar

  P12 both RDK of passwords must be the same, but this measure will apply to both the two signatures. It should have the same results as the command that you run.

  Kind regards

• ORA-00119: invalid specification for the system LOCAL_LISTENER parameter

  I cloned database of MRC. (test for role transitions) and set up DR.

  I tried to set up with no default port.

  When I'm bouncing of the db, (stop and start), cannot connect to the db.

  SQL > startup nomount;

  ORA-00119: invalid specification for the system LOCAL_LISTENER parameter

  ORA-00132: error syntax or network name not resolved "LISTENER_STBYCRMS."

  > > tnsnames.ora

  LISTENER_STBYCRMS

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT= 1898))

  STBY_CRMSDB =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT = 1898))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = stbycrms)

  (UR = A)

  )

  )

  LISTENER_CRMS =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT = 1698))

  CRMSDB =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT = 1698))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = GCD)

  (UR = A)

  )

  )

  ~

  > > listener.ora

  LISTENER11G =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT = 1898))

  )

  SID_LIST_LISTENER11G =

  (SID_LIST =

  (SID_DESC =

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = stbycrms)

  )

  )

  ADR_BASE_LISTENER11G = / u01/app/oracle

  * I have an entry to the file for local_listener pfile.

  * .db_name = "CRM".

  db_unique_name = stbycrms

  LOCAL_LISTENER = "LISTENER_STBYCRMS."

  Thank you

  Hello

  LISTENER_STBYCRMS (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT= 1898))

  Is the above entry is correct according to the syntax?

  where give you "="?

  LISTENER_STBYCRMS = (Description = (Address = (Protocol = TCP (port = 1898))(Host=Neptune)))

  or

  LISTENER_STBYCRMS =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXx)(PORT = 1898))

  )

  )

  -Pavan Kumar N

• Move the partition of the table and get ORA-14006: invalid partition name

  I'm using oracle 11.2.0.4 and I am trying to move a partitioned table to one tablespace to another.  I checked may times and I have the correct table name and the name of the partition.  However, I get the error ora-14006.

  Can see everything what could be the problem?

  SQL > ALTER TABLE GWPROD. QRY_TES_ROLLINGCUREDITS MOVE PARTITION 201112 TABLESPACE GW_PROD_T2 PARALLEL (DEGREE 4) NOLOGGING;

  ALTER TABLE GWPROD. QRY_TES_ROLLINGCUREDITS MOVE PARTITION TABLESPACE GW_PROD_T2 PARALLEL (DEGREE 4) NOLOGGING 201112

  *

  ERROR on line 1:

  ORA-14006: invalid partition name

  Thanks in advance.

  Names that begin with numbers are not legal partition names. A fool created by placing them between double quotes. You will need to do the same.

• ORA-22907: invalid CAST to a type that is not a nested table or VARRAY. Typed collection function

  Hello

  I tried to create a function that might return the type that is created on the outside.

  So I wrote script below. until the function created it compiled successfully, but after that, when the data querying, we encountered error,

  "ORA-22907: invalid CAST to a type that is not a nested table or VARRAY.

  SQL> create table emp
    2  (
    3    ename        varchar2(200 byte),
    4    mgr          number,
    5    employee_id  number
    6  );
  
  
  Table created.
  
  
  SQL> insert into emp (ename, mgr, employee_id)
    2       values ('king', 12, 1);
  
  
  1 row created.
  
  
  SQL> insert into emp (ename, mgr, employee_id)
    2       values ('clark', 12, 2);
  
  
  1 row created.
  
  
  SQL> commit;
  
  
  Commit complete.
  
  
  SQL> create or replace type t_emp as object (ename varchar2 (200), mgr number, employee_id number);
    2  /
  
  
  Type created.
  
  
  SQL> create or replace function f_emp return  t_emp
    2   is
    3  type rc_emp is ref cursor;
    4  r_emp rc_emp;
    5  v_emp t_emp;
    6  begin
    7   open r_emp for select * from emp where rownum=1;
    8   fetch r_emp into v_emp;
    9  close r_emp;
   10  return v_emp;
   11  exception
   12      when others then
   13      dbms_output.put_line(dbms_utility.format_error_stack);
   14      dbms_output.put_line(dbms_utility.format_call_stack);
   15      dbms_output.put_line(dbms_utility.format_error_backtrace);
   16      raise_application_error(-20001,sqlerrm);
   17  end;
   18  /
  
  
  Function created.
  
  
  SQL> show errors;
  No errors.
  SQL> select * from f_emp;
  select * from f_emp
                *
  ERROR at line 1:
  ORA-04044: procedure, function, package, or type is not allowed here
  
  
  
  
  SQL> select * from table(cast (f_emp as t_emp));
  select * from table(cast (f_emp as t_emp))
                            *
  ERROR at line 1:
  ORA-22907: invalid CAST to a type that is not a nested table or VARRAY
  
  
  
  
  SQL>
  

  Like this:

  ...

  CREATE or REPLACE TYPE t_emp_array IS TABLE OF THE t_emp;

  /

  FUNCTION to CREATE or REPLACE f_emp RETURN t_emp_array

  is

  type rc_emp is ref cursor;

  r_emp rc_emp;

  v_emp_array t_emp_array: = t_emp_array();

  BEGIN

  R_emp OPEN for SELECT t_emp(ename,mgr,employee_id) FROM emp WHERE ROWNUM = 1;

  collect the fetch r_emp in bulk in v_emp_array;

  CLOSE R_emp;

  Return v_emp_array;

  exception

  while others then

  dbms_output.put_line (dbms_utility.format_error_stack);

  dbms_output.put_line (dbms_utility.format_call_stack);

  dbms_output.put_line (dbms_utility.format_error_backtrace);

  raise_application_error (-20001, SQLERRM);

  end;

  /

  SELECT *.

  table (f_emp ());

  a table function works with a table (nested table or varray)

  HTH

• ORA-01722: invalid, range of 9999999,000 to 0,0000013

  Hello

  I have trouble with the error invalid number. In the game of results (a few thousand lines), there is no non-numeric characters.

  Export in MS Excel and looking at all the values of this column I can´t find non-digital is but notice

  that the data range is between 9999999,000 and 0,0000013, I wonder if the zero´s many are indeed looking very non digital Oracle.

  I admit, the number format is bad.

  Now... How can I fix that?

  The error for what follows is: error: ORA-01481: invalid number format model

  Select 'small number' of the double where to_number (0,0000013) < 1;

  Error: ORA-01722: invalid number

  Select 'large number' of the double where to_number (9999999,0) > 1

  Select 'large number' of the double where to_number (9999999,000) > 1

  The problem is the comma instead of the time, but I can't find a format of reasonable number that matches

  my maximum and minimum values.

  Example:

  SELECT to_number (0.0000013, ' 9999999999, ' NLS_NUMERIC_CHARACTERS = ",". ") OF THE DOUBLE

  Can someone help me with the number formatting?

  Here you go:

  @ John @ascheffer, I message you my paypal account to bet, you have lost

  http://Gennick.com/database/subquery-madness

  solution:

  Select * from

  (SELECT MRLS

  OF V_MRL_NG

  ) where CASE WHEN MRLS do not IS NOT NULL AND MRL <> ' > NWG' MRLS AND <> '-' THEN TO_NUMBER (REPLACE (REPLACE (MRLS,' ', "), ', '.'")) END > 1.0

• Cannot connect through the ORA-01017 Invalid Username/Password database link

  Hello

  I have two virtual machines with Oracle 11 g 2 and one with Oracle 12 c installed on RHEL 6

  I wanted to install a dblink between the 2, but after you have created the dblink I get error: ORA - 01017 Invalid username/password

  Now, I know, the error is clear enough but when I try to connect using netmgr it works

  So just to summarize, Oracle 12 c, I'm trying to connect to Oracle 11 g using a DBLINK but I get ORA-01017

  Since Oracle 12 c, I created a new service so that I have the remote db alias in tnsname.ora and at the end of the process, when they ask for test connection, I can connect successfully to remote db

  Then I created a dblink according to the following:

  SQL > CREATE PUBLIC DBLINK LINK DATABASE to CONNECT to

  "hr""" IDENTIFIED BY ' password ' with the HELP of 'REMOTEDB ';

  If I then select * from employees@dblink, I get the error

  What I've noticed, it is that in the 11g (the target machine) I can not connect with OS authentication, don't know if its related

  If i: sqlplus / as sysdba I get ORA-01031 insufficient become

  I have to connect to the Linux box as user 'oracle', who is a member of the groups oinstall dba

  Am I missing something?

  Thank you!

  CHRI$ says:

  SQL > CREATE PUBLIC DATABASE LINK DBLINK TO CONNECT TO

  'hr' IDENTIFIED BY 'password' with the HELP of "REMOTEDB";

  You will probably have to create the link without containing the user name and the word in double quotes.

• ORA-01722: invalid number in SQL Loader

  Hi all

  CREATE TABLE SAMPL_TABLE

  (

  ITEM_CATEGORY VARCHAR2 (30 BYTES),

  ITEM_NO VARCHAR2 (240 BYTES),

  ITEM_DESCRIPTION VARCHAR2 (240 BYTES),

  CLIENT_NAME VARCHAR2 (240 BYTES),

  CUSTOMER_NO VARCHAR2 (240 BYTES),

  VALID_AMOUNT_MONTH1 NUMBER,

  VALID_UNITS_MONTH1 NUMBER,

  VALID_BUDGET_AMOUNT_MONTH1 NUMBER,

  VALID_BUDGET_UNITS_MONTH1 NUMBER,

  ATTRIBUTE1 VARCHAR2 (240 BYTES),

  ATTRIBUT2 VARCHAR2 (240 BYTES),

  NUMBER OF VALID_RATE

  );

  Control file

  Options (Errors = 10000, Skip = 3)

  DOWNLOAD THE DATA

  INFILE ' / home/appltest/Sheet1.csv'

  BADFILE "sample.bad."

  DISCARDFILE 'sample.dsc '.

  REPLACE

  IN THE TABLE sampl_table

  fields completed by «,»

  surrounded of possibly "" "

  trailing nullcols

  (

  client_name TANK NULLIF client_name = BLANKS "RTRIM(:customer_name)."

  customer_no NULLIF CHAR customer_no = BLANKS "RTRIM(:customer_no)."

  item_no NULLIF TANK item_no = BLANKS "RTRIM(:item_no)."

  valid_amount_month1 "to_number (: valid_amount_month1, '999,999,999.99')."

  valid_units_month1 "to_number (substr (: valid_units_month1, instr(:valid_units_month1,'$') + 1), '999,999,999.99')."

  valid_budget_units_month1 "to_number (: valid_budget_units_month1, '999,999,999.99')."

  valid_budget_amount_month1 "to_number (trim (substr (: valid_budget_amount_month1, instr(:valid_budget_amount_month1,'$') + 1)), '999,999,999.99')."

  valid_rate NULLIF CHAR valid_rate = BLANKS 'RTRIM(:valid_rate) '.

  )

  Sheet1.csv

  Name of the cust	Cust #.	Article no.	Item Desc	Category	Amount – month 1	Units - month 1	Act early	Act early	Budget - months 1	Budget - unit - months 1	Rate
  Name of the cust	Cust #.	Article no.	Item Desc	Category	Amount – month 1	Units - month 1	Act early	Act early	Budget - months 1	Budget - unit - months 1	Rate
  Name of the cust	Cust #.	Article no.	Item Desc	Category	Amount – month 1	Units - month 1	Act early	Act early	Budget - months 1	Budget - unit - months 1	Rate
  REYNU	1001	ABC001	ABC Renyu	ABC					82	61	1
  REYNU1	1028	ABC123	ABCRenyu123	ABC					295	1469	1
  REYNU2	1028	ABC344	ABC Renyu 344	ABC					2270	6335	1

  
  

  Get error below

  Sheet 1: Rejected - error on the table SAMPL_TABLE, column VALID_RATE.

  ORA-01722: invalid number

  Sheet 2: Rejected - error on the table SAMPL_TABLE, column VALID_RATE.

  ORA-01722: invalid number

  Sheet 3: Rejected - error on the table SAMPL_TABLE, column VALID_RATE.

  ORA-01722: invalid number

  Sheet 1: Rejected - error on the table SAMPL_TABLE, column VALID_AMOUNT_MONTH1 .

  ORA-01722: invalid number

  Sheet 2: Rejected - error on the table SAMPL_TABLE, column VALID_AMOUNT_MONTH1 .

  ORA-01722: invalid number

  Sheet 3: Rejected - error on the table SAMPL_TABLE column VALID_AMOUNT_MONTH1

  ORA-01722: invalid number

  Can you help me please?

  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production

  Hello

  No sign of setting shaped or ' $' is seen in the data, which is the reason why I guess you used the conversions in the * ctl file.

  What is the problem with this symbol $ in the code?

  No problem with the ' $'-what I mean is that it is not necessary.

  Looking for him "$" field and exclude it from your text/number (SUBSTR) and if there is no "$" in your file, this additional training is not mandatory - why clutter up your code with unnecessary functions?

  Regarding the error you get, it is related to the format mask, you provide:

  Message #20:

  Select to_number (substr (146, instr(146,'$') + 1), '999,999,999.99') of double

  o/p: 146

  Select to_number (substr (1469, instr(1469,'$') + 1), '999,999,999.99') of double

  Error: ORA-01722: invalid number

  1. you must use "146" (text) and no 146 (number).

  2. ' 146' works because it "fits" the format mask you supplied: 999 999,999. 99. " but '1469' does not like the format mask expects one ',' as the delimiter of thousands, that is, "1 469'."

  Select to_number (substr (1, 469', instr('1,469','$') + 1), '999,999,999.99') twice;

  Similarly, in the #22 Post:

  to_number (substr (' 752,3308', instr ('752.3308', ' $') + 1), 999, 999 999,99') of double

  4 decimals are consistent with the format DP 2 mask.

  
  

  Simply remove all masks of format.
  

• ORA-01722: invalid number calculation error during the treatment.

  My version of the APEX is Application Express 4.2.6.00.03

  I imported apex application 4.0.2 and his object of decision-making support in my apex.

  Its installed successfully.

  But when I try to run this application it show me this error:

  ORA-01722: invalid number calculation error during the treatment.

  Thank you guys for your help.

  I found the solution.

  There was a problem in the authentication scheme.

  I called function as return function_name in 4.0.2

  but in the Apex 4.2.6 to call a function word return is not necessary.

  He was throwing the error caused that Word back.

• ORA-29283: invalid file operation, SP2-0103: nothing in the SQL buffer to run.

  Hi gurus of the Oracle,.

  Our version of oracle's 11 g RAC 2.

  We write records into a file using utl_file.

  According to the request, data should write to 160 files.

  After writing to 50 records, his mistake to launch. as

  BEGIN PROC_WRITE_TO_FILE; END;

  *

  ERROR on line 1:

  ORA-29283: invalid file operation

  ORA-06512: at "SYS." UTL_FILE", line 536

  ORA-29283: invalid file operation

  ORA-06512: at "TEST. PROC_WRITE_TO_FILE', line 130 '.

  ORA-06512: at line 1

  SQL > SP2-0103: nothing in the SQL buffer to run.

  My procedure is

  -DECLERATION

  BEGIN

  OPEN C2;

  LOOP

  EXTRACT THE C2 IN P_WRITE;

  WHEN THE EXIT C2% NOTFOUND;

  L_NAME: = "WRITE" | P_WRITE | » _. TXT';

  L_FILE: = UTL_FILE. FOPEN (L_DIR, L_NAME, 'W');

  OPEN C1 (P_WRITE);

  LOOP

  FETCH C1 INTO P_OD_PLACE, P_OD_USER, P_ED_PERF, P_GM_LST, P_GM_FIRST, P_GM_MOD, P_GM_SUFF, P_BD_NUM, P_BD_FRET, P_BD_UNIT, P_BD_GOLE, P_BD_GEP, P_DAT_BOD, P_DAT_EFF, P_ED_RACE, P_ED_GENDER, P_LAND_DIST, P_LAND_LOT, P_ED_STAT_REASON ,P_OD_PRECINCT,P_OD_JANI_PREC,P_NB_PIST_CNG,P_NB_PIST_SEN,P_NB_PIST_VASER,P_NB_PIST_JUD,P_NB_PIST_COMMI,P_NB_PIST_SCHOL,P_NB_PIST_WD,P_NB_PIST_JANIB,P_NB_PIST_JANIC,P_NB_PIST_FIRE,P_NB_PIST_SCHOB,P_NB_PIST_SUPCM,P_NB_PIST_WATBD,P_NB_PIST_GOLEL P_GM_NAME, P_ED_JANI_CODE, P_DAT_ACCEPT, P_DAT_CHANGED, P_OD_COMBO, P_TX_DESC, P_DAT_LST_CTT, P_BD_NUM2, P_BD_FRET1, P_BD_UNIT2, P_BD_GOLE2, P_BD_ST, P_BD_GEP5, P_BD_GEP4, P_BD_FRET2, P_BD_FRET3, P_BD_COUNTRY;

  WHEN EXIT C1% NOTFOUND;

  UTL_FILE. PUT_LINE (L_FILE, P_OD_PLACE: ' |) ' || P_OD_USER |' | ' || P_ED_PERF |' | ' || P_GM_LST |' | ' || P_GM_FIRST |' | ' || P_GM_MOD |' | ' || P_GM_SUFF |' | ' || P_BD_NUM |' | ' || P_BD_FRET |' | ' || P_BD_UNIT |' | ' || P_BD_GOLE |' | ' || P_BD_GEP |' | ' || P_DAT_BOD |' | ' || P_DAT_EFF |' | ' || P_ED_RACE |' | ' || P_ED_GENDER |' | ' || P_LAND_DIST |' | ' || P_LAND_LOT |' | ' || P_ED_STAT_REASON |' | ' || P_OD_PRECINCT |' | ' || P_OD_JANI_PREC |' | ' || P_NB_PIST_CNG |' | ' || P_NB_PIST_SEN |' | ' || P_NB_PIST_VASER |' | ' || P_NB_PIST_JUD |' | ' || P_NB_PIST_COMMI |' | ' || P_NB_PIST_SCHOL |' | ' || P_NB_PIST_WD |' | ' || P_NB_PIST_JANIB |' | ' || P_NB_PIST_JANIC |' | ' || P_NB_PIST_FIRE |' | ' || P_NB_PIST_SCHOB |' | ' || P_NB_PIST_SUPCM |' | ' || P_NB_PIST_WATBD |' | ' || P_NB_PIST_GOLEL |' | ' || P_GM_NAME |' | ' || P_ED_JANI_CODE |' | ' || P_DAT_ACCEPT |' | ' || P_DAT_CHANGED |' | ' || P_OD_COMBO |' | ' || P_TX_DESC |' | ' || P_DAT_LST_CTT |' | ' || P_BD_NUM2 |' | ' || P_BD_FRET1 |' | ' || P_BD_UNIT2 |' | ' || P_BD_GOLE2 |' | ' || P_BD_ST |' | ' || P_BD_GEP5 |' | ' || P_BD_GEP4 |' | ' || P_BD_FRET2 |' | ' || P_BD_FRET3 |' | ' || P_BD_COUNTRY);

  UTL_FILE. FFLUSH (L_FILE);

  END LOOP;

  CLOSE C1;

  END LOOP;

  CLOSE C2;

  UTL_FILE. FCLOSE (L_FILE);

  END;

  /

  Appreciate your suggestions.

  Thank you and best regards,

  REDA

  You understand, but you can't do it?  What?  Move a single line in the right place?

  * sigh * I wish I was your code monkey...

  -DECLERATION

  BEGIN

  OPEN C2;

  LOOP

  EXTRACT THE C2 IN P_WRITE;

  WHEN THE EXIT C2% NOTFOUND;

  L_NAME: = "WRITE" | P_WRITE | » _. TXT';

  L_FILE: = UTL_FILE. FOPEN (L_DIR, L_NAME, 'W');

  OPEN C1 (P_WRITE);

  LOOP

  FETCH C1 INTO P_OD_PLACE, P_OD_USER, P_ED_PERF, P_GM_LST, P_GM_FIRST, P_GM_MOD, P_GM_SUFF, P_BD_NUM, P_BD_FRET, P_BD_UNIT, P_BD_GOLE, P_BD_GEP, P_DAT_BOD, P_DAT_EFF, P_ED_RACE, P_ED_GENDER, P_LAND_DIST, P_LAND_LOT, P_ED_STAT_REASON ,P_OD_PRECINCT,P_OD_JANI_PREC,P_NB_PIST_CNG,P_NB_PIST_SEN,P_NB_PIST_VASER,P_NB_PIST_JUD,P_NB_PIST_COMMI,P_NB_PIST_SCHOL,P_NB_PIST_WD,P_NB_PIST_JANIB,P_NB_PIST_JANIC,P_NB_PIST_FIRE,P_NB_PIST_SCHOB,P_NB_PIST_SUPCM,P_NB_PIST_WATBD,P_NB_PIST_GOLEL P_GM_NAME, P_ED_JANI_CODE, P_DAT_ACCEPT, P_DAT_CHANGED, P_OD_COMBO, P_TX_DESC, P_DAT_LST_CTT, P_BD_NUM2, P_BD_FRET1, P_BD_UNIT2, P_BD_GOLE2, P_BD_ST, P_BD_GEP5, P_BD_GEP4, P_BD_FRET2, P_BD_FRET3, P_BD_COUNTRY;

  WHEN EXIT C1% NOTFOUND;

  UTL_FILE. PUT_LINE (L_FILE, P_OD_PLACE: ' |) ' || P_OD_USER |' | ' || P_ED_PERF |' | ' || P_GM_LST |' | ' || P_GM_FIRST |' | ' || P_GM_MOD |' | ' || P_GM_SUFF |' | ' || P_BD_NUM |' | ' || P_BD_FRET |' | ' || P_BD_UNIT |' | ' || P_BD_GOLE |' | ' || P_BD_GEP |' | ' || P_DAT_BOD |' | ' || P_DAT_EFF |' | ' || P_ED_RACE |' | ' || P_ED_GENDER |' | ' || P_LAND_DIST |' | ' || P_LAND_LOT |' | ' || P_ED_STAT_REASON |' | ' || P_OD_PRECINCT |' | ' || P_OD_JANI_PREC |' | ' || P_NB_PIST_CNG |' | ' || P_NB_PIST_SEN |' | ' || P_NB_PIST_VASER |' | ' || P_NB_PIST_JUD |' | ' || P_NB_PIST_COMMI |' | ' || P_NB_PIST_SCHOL |' | ' || P_NB_PIST_WD |' | ' || P_NB_PIST_JANIB |' | ' || P_NB_PIST_JANIC |' | ' || P_NB_PIST_FIRE |' | ' || P_NB_PIST_SCHOB |' | ' || P_NB_PIST_SUPCM |' | ' || P_NB_PIST_WATBD |' | ' || P_NB_PIST_GOLEL |' | ' || P_GM_NAME |' | ' || P_ED_JANI_CODE |' | ' || P_DAT_ACCEPT |' | ' || P_DAT_CHANGED |' | ' || P_OD_COMBO |' | ' || P_TX_DESC |' | ' || P_DAT_LST_CTT |' | ' || P_BD_NUM2 |' | ' || P_BD_FRET1 |' | ' || P_BD_UNIT2 |' | ' || P_BD_GOLE2 |' | ' || P_BD_ST |' | ' || P_BD_GEP5 |' | ' || P_BD_GEP4 |' | ' || P_BD_FRET2 |' | ' || P_BD_FRET3 |' | ' || P_BD_COUNTRY);

  UTL_FILE. FFLUSH (L_FILE);

  END LOOP;

  CLOSE C1;

  UTL_FILE. FCLOSE (L_FILE);

  END LOOP;

  CLOSE C2;

  END;

  /

• IKM Partition Oracle Exchange Error loading - ORA-14006: invalid partition name

  Hello

  I use ODI Standalone Edition Version 11.1.1

  I've created an interface, the target table's partition.

  DDL script

  CREATE TABLE big_table2)

  ID NUMBER (10),

  CREATED_DATE DATE,

  lookup_id NUMBER (10),

  given VARCHAR2 (50)

  )

  PARTITION OF RANGE (created_date)

  (PARTITION big_table_2007 VALUES LESS THAN (MAXVALUE));

  the performance of the interface error: -.

  Internal

  CZ_SC_CONSULTING

  jar:file:/D:/Oracle/middleware/Oracle_ODI1/oracledi/client/jdev/extensions/Oracle.ODI.Navigator.jar!/com/Sunopsis/graphical/gif/State/f_error.gif

  2015-01-28 10:58:38.0

  2015-01-28 10:59:08.0

  30

  14006

  ODI-1226: step INT_EXCH_PART fails after 1 attempt.

  ODI-1240: Flow INT_EXCH_PART fails during an operation of integration. This flow of charge table BIG_TABLE2 target.

  ODI-1228: failed INT_EXCH_PART (integration) task on the target of ORACLE ODI_STAGE connection.

  Caused by: java.sql.SQLException: ORA-14006: invalid partition name

  ORA-06512: at line 2

  	at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
  	at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
  	at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
  	at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
  	at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
  	at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
  	at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
  	at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1115)
  	at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
  	at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
  	at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3954)
  	at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1539)
  	at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
  	at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
  	at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
  	at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  	at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
  	at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
  	at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
  	at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
  	at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
  	to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:366)
  	at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
  	at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
  	to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:292)
  	to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:855)
  	at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
  	to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
  	at java.lang.Thread.run(Thread.java:662)
  	1000000	0	0	0	0

  Please can I know what is the problem.

  Put your name of the partition in upper case and double coate as:

  'BIG_TABLE_2007 '.

  The capital should not be a problem, but it is better to be like that because it will store like this in the table USER or ALL_TAB_PARTITIONS.

  This makes it easier to compare if you need to check if a partition already exists or not.

  Hope this can help you.