Oracle Application Server 10g R2 install Oracle Enterprise Linux 5

Similar Questions

• Oracle Application Server 10g R3 with patch set 10.1.3.5.0

  Hi all

  Can someone help me on this point, when I install Oracle Application Server 10g Release 3 (10.1.3.1.0) and patch set 10.1.3.5.0 on Linux. I'm not able to find the container forms and reports.

  This version does not support forms and the States or I go what OAS 10 g R2 (10.1.2.0.2) with the patch set 3 (10.1.2.3.0). What is the difference between these two versions.

  Please help me.

  Kind regards

  Hi James,

  First of all forms and reports are only available in OAS 10 g 2 (10.1.2.0.2) and you would go to the latest version in gr 10, 2 which is 10.1.2.3.

  The Oracle Application Server 10 g 3 version is a limited edition and SOA and OC4J components.

  So if you need to forms and reports, you must make 10 gr 2 OAS.

  Kind regards

  Prakash.

• Oracle Application Server 10g cloning - Urgent

  Hi all
  I received a new assignment, which involves Oracle 10g application server, I am new to oracle application server and hoping that someone will specify please my doubts.
  
  I clone a production machine (Solaris 10), which has oracle 10 g, this machine was Oracle database 10g before and just the application server has been installed on this subject, I need to clone a test environment for this machine, I have two following doubts
  
  (1) is it possible to install just Oracle Application server 10 g on a computer that already contains the database oracle 10 g, in the affirmative, whereas on the database that is installed when you install the Oracle 10 g application server.
  
  (2) how to clone the machine of production above, the oracle 10 g database can we clone first, and then the application oracle 10 g cloned on the new server machine?
  
  A response with impatience

  user12077492 wrote:
  I clone a production machine (Solaris 10), which has oracle 10 g, this machine was Oracle database 10g before and just the application server has been installed on this subject, I need to clone a test environment for this machine, I have two following doubts

  (1) is it possible to install just Oracle Application server 10 g on a computer that already contains the database oracle 10 g, in the affirmative, whereas on the database that is installed when you install the Oracle 10 g application server.

  (2) how to clone the machine of production above, the oracle 10 g database can we clone first, and then the application oracle 10 g cloned on the new server machine?

  (1) Yes, it is possible. The DB that comes with the OAS, as DB infrastructure for it (I assume that you install a full OAS with infrastructure and environments times) does not affect the DB that you already have on your system... of course... as long as install you them in their separate homes.

  (2) I always say, the term cloning is used a bit loosely, in the sense of general communication making copies. In the context of the OAS, cloning works for middletiers only. You can't clone an infrastructure.

  To make an alternate/redundant environment for the OAS, you can proceed as follows:
  (- a) is using the same infra on computer 1 and install another high and register with the same infra.
  (b) or to install another infra on machine 2, and also an environments registered with it.

  Here for the first option (a), cloning can be used because you can (* only *) clone an intermediate layer. There are advantages and disadvantages of this facility, including that you share the SSO and OID, and therefore the users and the groups of bases, etc. on these two environments - something you can or don't want to. But then, there are also a few outputs so as to avoid or minimize their effects too. Please see the following reference for cloning and research on Metalink to minimize the effects, once you get more familiar with the process.

  The Oracle® Application Server Administration Guide
  10g Release 2 (10.1.2)
  B13995-08
  [Cloning 10 Application staging server Instances | http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/cloning.htm#BCGBDIDF]

  For (b), you will need to step a server as defined in the present reference.
  [11 staged from a Test to a Production environment | http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/prodtest.htm]

  There are a few notes on Metalink related questions about benefits or procedures for cloning and staging of an environment too.
  There are other ways for export/transport your applications to another instance through DB. Please also read about them.

  hope that helps!
  AMN

• Oracle 10g on Oracle Enterprise Linux 6 using VMWare

  I am trying to install Oracle 10 g on a Linux server. The reason is that the system, which I am working 10g and want a test environment on my computer.
  I installed the latest version of Oracle Enterprise Linux 6 on VMWare Player.
  So far so good.
  Now I want to install 10g on the system and have read both Expert Oracle 10 g database Administration and the fast for 10g Release 2 Setup Guide (10.2) for Linux x 86
  I seems to be now stuck in the situation to get all loaded packages that are recommended. Some of the packages are not on the cd, so I'm starting to wonder if it is a valid version for installation.
  Because the version is releast Red Hat Enterprise Linux Server 6.0, I had that with
  # cat/etc/redhat-release
  
  So 10g is not supported on this version?
  If so do I download the previous version of Linux?
  If so what version and if you can direct me in the sense I would be really happy.

  Currently 6 Linux is not certified to any version of database Oracle.

  Operating system for 10 g 2 (which is what I assume you are using) is listed in the Release Notes - http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15659/toc.htm#CHDFHIEA

  Srini

• Oracle enterprise linux and oracle 10g?

  Hey;
  
  I am fairly new to try to download oracle and get installed on a linux machine. I made a few attempts on linux fedora core 10 and home edition of windows vista that does not go very far. Since I just passed my exams for ocp via a boot camp (yay for me!), I'm hoping to get a couple of linux boxes operational so that down the concepts by the practice.
  
  From what I read, it seems that I can download enterprise linux, put it on a system and then download oracle 10g and install this w/little or no difficulty (at least not expected...)
  
  Am I reading that right or did I miss something? Any info greatly apprecaited.
  
  Doug O'Leary

  Hello

  You can download enterprise linux and 10g and go there. Pre-packaged for the components required to install the oracle Enterprise linux software, here is a link for further reference see cross-platform compatibility.

  http://www.Oracle.com/technology/support/MetaLink/index.html

  Concerning
  OrionNet

  Published by: OrionNet on June 8, 2009 17:00

• Installing Oracle 11g R2 on Oracle Enterprise Linux 5.1

  Hello
  May I know if Oracle 11 g R2 can be installed on OEL5.1, if yes, oracle is certified or not.
  
  Concerning
  Bobby
  
  Edited by: user12119634 (bobs) 30 Sep, 2010 22:07

  Hi user;

  Its certified

  Linux x 86 platform
  Platform Version Oracle Enterprise Linux 5/Oracle VM
  Product version 11 GR 2
  Certified certification status

  Certified on Oracle Enterprise Linux 5 Update 2 or higher
  See Oracle Database Installation Guide 11g Release 2 (11.2) for Linux for the minimum requirements of the operating system.

  Respect of
  HELIOS

• Application specialist Oracle Enterprise Linux - 1z0-402

  I saw [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=351] and [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=144] I think I notice a change.
  
  After having passed 1z0-402 (just now) to get this (Oracle Enterprise Linux application specialist) certification?
  
  
  Or certification is available to those within the Oracle partner network?
  
  
  Page: [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=146] is not clarified this.
  
  
  Some certifications and existing reviews seem to be spring upward with this logo attached, clarification would be useful.
  
  
  
  I confess that I feel the pass mark on this review associated with 57% is too low to justify the title of the certification associated without the title of devaluation. I wouldn't think of someone who passed this exam with 58% being sent to me as a specialist of Oracle partner Oracle Enterprise Linux network implementation. Probably a pass mark of 65 to 70% would be reasonable, and I would plump for 67%.
  
  Published by: bigdelboy on November 29, 2009 06:37
  -A bit of history is on {message identifier: = 3728606}
  -In addition the long awaited ISBN: 978-0071615440 is now scheduled for February 5, 2010. The availability of this book would be the success rate of the exam 1z0-402 too low?

  If you took the review 402 previously, you should automatically receive implementation specialist Oracle Enterprise Linux certification. This certification is available for all candidates and not OPN members only. If you do not receive this certificate within 4 to 6 weeks, please contact [email protected] customer service and they will help with the reception of this certificate.

  With regard to the test score. Results of the review reflect the level of difficulty of the examination. More scrutiny is difficult, more passing grade. This is a very simplified explanation for everything that will determine a test score. There are a lot of mechanics that go into determining the points of overtaking, but a decisive factor is the level of difficulty of the examination.

  Kind regards
  Brandye Barrington
  Certification Forum Moderator
  Manager certification program

• EBS 11i install on Oracle Enterprise Linux 4

  Hi, friends:
  
  I want to install EBS 11i of Oracle Enterprise Linux 4, and I am looking for the installation guide for that, Cloud someone give me some advice?
  
  Thanks in advance.
  
  Ronnie

  PL see ML notes 316806.1

  Srini

• Oracle Enterprise Linux: Required Package for 11.2.0.3 CARS

  I downloaded Oracle Enterprise Linux 64 Bit in November 2012 (Oracle Linux Release 6, update 3)
  
  Once I have installed OEL, how can I check if all needed packages required for installation of grid Infrastructure 11.2.0.3 smooth is installed?

  Hello

  the new name of "oracle-validated" under OL6 is oracle-RDBMS-server-11 GR 2-preinstall:

  https://blogs.Oracle.com/Linux/entry/oracle_rdbms_server_11gr2_pre

  Concerning
  Sebastian

• memory usage of Oracle on Oracle Enterprise Linux 5.2

  Hello
  
  I installed a copy of Oracle 9.2.0.4 db server software (Enterprise edition) on Oracle Enterprise linux 5.2 (32 bit)
  After installing the software, I created two instances db with DBCA.
  
  Now the question is that, after I start the instance db, after awhile, I see more than 95% of the 8 GB of memory on this server in use.
  The size of sga max of these instances collectively is not more than 800 MB. In fact, even after closing one of the instances of memory
  consumption do not go down significantly because the instance is not assigned too much memory in the first place.
  
  With the help of TOP does not give a clear picture at all. If I keep the db instance down after restarting the server, consumption of memory is quite normal - less than 500 MB for all internal servers OS treats. SHMMAX is a default value of 4 GB and swap memory occupies about 16 GB. Another point that I want to stress is that I don't see most of the 16 GB memory swap are allocated. Nearly 90% of swap remains free.
  
  I was wondering how I can solve this problem on a new server.

  Hi usr1298

  I've installed a lot of servers Oracle Linux 2.1, 3,..., 5, and in each of them, I noted that the same behavior. At first when I saw this behavior, I thought something was wrong, but it's the behavior of memory on Linux when Oracle works. I think that default Oracle software reserves all this memory (90%) and that it uses on request but really the software does not use all the memory in a real way in the proceeding does not heavy operations. As I wrote, do not worry about this and worry on this subject when the swap space began to be used more than 20% despite the SGA_MAX_SIZE and the sum of the other parameters of memory does not receive nearly the total amount of RAM.

  Joel Perez
  DBA Oracle
  Members AS

• Paths multiple problem with PowerVault MD3200i + Oracle Enterprise Linux (5,7)

  Hello

  I'm trying to configure MPIO on a host (running Oracle Enterprise Linux Server 5.7) connected to an Powervault MD3200i. I have a few unexpected problems with/dev/dm-0 missing after reboot.

  I configured 3 virtual disks (RAID 1) with MPIO. 3 devices have been created (/ dev/dm-0, / dev/dm-1 and/dev/dm-2).  If I mount them manually, they work very well, so I've added to the fstab. After a reboot, I checked that/dev/dm-1 and/dev/dm-2 have been automatically but is not/dev/dm-0. In fact, the/dev/dm-0 has disappeared from the directory of the device (!)

  If I rinse 'multipath f' and ' multipath - v2 "the device gets recreated, but disappears on the"
  next reboot again. How can I resolve this behavior? Can anyone help?

  Thanks in advance.

  See you soon

  I thought about it... the problem is that I had the wrong specified dev in fstab.

  Should I use the devices in/dev/map /... it worked immediately.

• VMware p2v oracle enterprise linux

  Hi people,

  I need to perform a p2v of oracle enterprise Linux server.

  Can someone please tell me the correct procedure (if no document is available, that would be great ), thanks for the pointers.

  This was better than I expected, I downloaded converter 5.5.1 and it went smoothly, no reconfiguration needed, it installs GRUB, patch mount point entries in fstab and re-create the virtual disk original (all automatically).

  Bravo from VMWare.

• Can I use file of udev rules for RAC on Oracle Enterprise Linux 6 11.2.0.3?

  Version of the grid: 11.2.0.3
  Platfomrm: The last Oracle Enterprise Linux 6 (Unbreakable Enterprise Kernel)
  
  
  Yes guys Oracle sales have convinced our Manager to go OEL of AIX.
  We plan to install RAC on Oracle Enterprise Linux 6 (UEK) 11.2.0.3.
  
  I read this thread on the asmlib and udev rules file.
  List of rules for CAR 10.2 udev
  
  As a benefit to ASMLib, periera Levi said (quotes)
  '+ A good async IO interface to the database, all the I/o interface is based on a model of performance + ASYNC'
  
  Oracle is not out for 6 OEL or RHEL 6 AsmLib. I think that they will not release asmlib more.
  
  So, we will use only the udev rules file. Without ASMLib, we will have an ASYNCHRONOUS i/o or other storage related issues?
  
  Someone at - it successfully installed 11.2.0.3 RAC OEL 6 with udev rules file?

  I use +/etc/udev/rules.d/40-multipath.rules+ udev file to configure the permissions of device of multiple devices on path to e/s for use by o/s user grid.

  It is as follows:

  # modded for setting mpath device permissions
  
  SUBSYSTEM!="block", GOTO="end_mpath"
  
  KERNEL!="dm-[0-9]*", GOTO="end_mpath"
  
  PROGRAM!="/sbin/mpath_wait %M %m", GOTO="end_mpath"
  
  ACTION=="add", RUN+="/sbin/dmsetup ls --target multipath --exec '/sbin/kpartx -a -p p' -j %M -m %m"
  
  # goto labels added
  PROGRAM=="/sbin/dmsetup ls --target multipath --exec /bin/basename -j %M -m %m", RESULT=="?*", NAME="%k", SYMLINK="mpath/%c", GOTO="check_cluster_devs"
  PROGRAM!="/bin/bash -c '/sbin/dmsetup info -c --noheadings -j %M -m %m | /bin/grep -q .*:.*:.*:.*:.*:.*:.*:part[0-9]*-mpath-'", GOTO="check_cluster_devs"
  PROGRAM=="/sbin/dmsetup ls --target linear --exec /bin/basename -j %M -m %m", NAME="%k", RESULT=="?*", SYMLINK="mpath/%c", GOTO="check_cluster_devs"
  
  GOTO="end_mpath"
  
  # set device permissions for Grid Infrastructure
  LABEL="check_cluster_devs"
  RESULT=="*", GROUP="oinstall", MODE="660"
  RESULT=="*", OWNER="grid", GROUP="oinstall", MODE="660"
  OPTIONS="last_rule"
  
  LABEL="end_mpath"
  
  # eof
  

  I understand that it is no longer necessary that can be configured in +/etc/multipath.conf+ as follows:

  ..
  multipaths {
      multipath {
          wwid  SSCST_BIOscst1_sdb_757d30d0
          alias scst1_sdb
          mode 0660
          uid oinstall
          gid grid
        }
  .. etc.
  }
  

  However, has never work properly myself--must do something wrong that I saw a few sources Internet showing it works.

  As far as I KNOW, it is also with OL6 (as it is with OL5 and earlier versions), not a question of AsmLib or udev/MPIO. Udev is a Mapper devices used by the kernel. The decision is whether to add another layer called AsmLib. Personally, I have yet to see any convincing evidence that why should I increase the complexity of the kernel driver stack, adding AsmLib. We also had a few serious incompatibility with AsmLib issues in the past (where he with, caused compatible I/O corruption at the logical level).

  If you look at the clusters in the www.top500.org list, many of them have shared storage accessible via udev/multichemin Pentabytes and nothing else. MPIO has its roots as a driver of kernel for these groups. One of the reasons why we stopped years ago to use EMC Powerpath for our CARS that are wired to EMC San to shared storage.

• Discoverer and application server 10g R2.

  Hi all.
  
  I installed the application server with the discoverer, but I found no dicoverer it
  It is nothing else but a batch file.
  Please guide me what should I do?

  Hello
  Do you have what version of the application server installed? Not only 10g but you install 10.1.2.0.0 and 10.1.2.2 or 10.1.2.3, patch or have you installed a different version of basic?

  Discoverer 10 g R2 will be available if you use the application 10.1.2.0.0 Server and then patch 10.1.2.2 or 10.1.2.3. If you have installed a different version of the application server you won't have the engine installed discoverer.

  To test simply launch a browser and call the URL for the home page of the server like this: http://yourserver.yourdomain:7778

  If the discoverer is installed you will see links to launch more Discoverer and Discoverer Viewer. You can also try to call direct using Discoverer: discoverer/more/http://yourserver.yourdomain:7778 or http://yourserver.yourdomain:7778/discoverer Viewer

  Another way to see if the discoverer components are installed is to locate the root for the ORACLE_HOME in which the application server has been installed. From there, if you have discoverer, you will see an ORACLE_HOME\discoverer with Sub-folders folder of config, deploy, lib, newspapers, mesg, doc, plus_files, secure and util.

  In addition, if you browse here: ORACLE_HOME\j2ee\OC4J_BI_Forms\applications you should see a folder called discoverer

  If you can't find the files above, you have installed an application server which does not support the discoverer. You will need to uninstall it and then install 10.1.2.0.0 and it patch. You can also find this post on my blog to be useful: http://learndiscoverer.blogspot.com/2008/04/most-useful-patch-numbers.html

  Best wishes
  Michael

• DB installation on oracle enterprise linux

  Hi guyes,
  
  in fact I Normand to do some experiments and need to install oracle database 10 G R2 on any version of linux.by the time I heard about oracle enterprise linux.
  
  I would like to know, what is the difference between red hat enterprise linux 5.2 and oracle enterprise linux to install the oracle database?
  
  What is the adapted version to install the database? It is in the oracle compatibility matrix?
  
  Thanks and greetings
  VD
  (forgive me for posting this thread in the wrong place)
  
  Published by: vikrant dixit on November 19, 2008 20:57

  Everything you did for RHEL5.2 will work perfectly in OEL5.2

  You raise a very good point: the unfortunate fact is that there is * nothing * to all to OEL a house "better" or "easier" for that plain old RHEL Oracle databases. There is no core set environment variable user parameters or pre configured, for example, it would be just for an Oracle straight out of the box installation: you must always you fix all exactly as if it were of RHEL.

  This is normal: OEL was and is intended to be binary compatible with RHEL and therefore no settings of Oracle or parameters that are not in RHEL can be included in the OEL.

  So yes, if it's complicated on RHEL, it is exactly as complicated as on OEL.

  (I'm biased though: If you use my script to doris, you will find that you can install Oracle on virtually any Linux distribution as easily as any other.) See http://dizwell.com/2008/05/01/doris-redux, and if you want to watch a video of how to do to use the script: http://dizwell.com/2008/09/29/proving-a-point/)