Organization of the 3 columns of different sizes

Similar Questions

• How to adjust the angle rounded with different sizes of forms to match?

  How would you describe the relationship between a corner rounded to the dimensions of a shape? I want to create a rule of how to cut corners on our boxes, but want it to be applicable to the different sizes of boxes - but I don't know how the math works. I wish that all of our boxes to look consistent, regardless of the amount. Thank you.

  What happens if you make an article for each basic shape (square, high rectangle, large rectangle) and set the size of corner on each of them. So, if you need a larger version, just wide. The proportions of the corner to the size of the objects will remain the same.

• The photos show that different sizes during a trial 'mode in form of slide show'

  Scanning and copying of many ancient prints and negatives.  When I try to view them using Windows 'view as slideshow' some show in full screen and others of different forms and sizes.  Do I need to use a specific size and a pixel during the recording of these pictures to show images full-screen?

  Thank you for any advise you can offer

  Yes, you should use a similar or identical to your screen resolution, size so if you have a resolution of 1024 x 768 so your photos need to be scanned in / saved to / resized to this size, but a small 3 x 2 "photo scanned and enlarged so that size would look quite pixelated and is often optimized as a small peak with black borders.

  Try both and see which you prefer.

• Paragon/Ghost: Create a bootable clone between the (hard drives of different sizes to)

  I was web-searching options of backup in the last days and want to settle on a solution of freeware Paragon or Ghost (I know that the latter meets the needs, but I wonder if the first can do with relative ease for a beginner). Here's the scenario:

  My current Toshiba Satellite A660 (PSAW3C-047017 model) running Windows 7 Professional 64-bit. The HARD disk is the disk HARD MK6465GSX from Toshiba (http://storage.toshiba.eu/cms/en/hdd/multimedia/product_detail.jsp?productid=341). I bought a small (500GB) Seagate Momentus XT, which has apparently Advanced Format. I guess the Toshiba HDD 512 bytes/sector, because nothing comes up in a search on the web for Advanced Format for this HARD drive.

  I would like the Momentus XT allows you to create a bootable to my Toshiba HDD clone. The Momentus XT will be in a pregnant that will interface to the portable computer via eSATA. After cloning for the Momentus XT, I would replace my Toshiba HDD in the laptop with the Momentus XT due to its superior performance. The Toshiba HDD becomes my HDD auxiliary (in the external case) for the cloning of the weekly. If nothing ever happens to the Momentus XT in the laptop, I can then take the Toshiba HDD out of the enclosure and put it in the laptop. However, this mode of use of the means I have to be able to clone initially Toshiba HDD Momentus XL, then clone in the other direction later.

  I read a lot about needing to be trendy, but not having alignment issues do not image, cloned, or formatted a hard drive before (except obey blindly support), I'm foggy on the understanding. Seagate announced their SmartAlign technology, but there is no corroboration on its effectiveness and no info about HARD drive models have it. Because Windows 7 is described as supporting the AF, I guess that many of the issues identified by SmartAlign are nonissues to me.

  My concern is that if there are other traps due to the corresponding HDD sizes and sectors that could create problems for the cloning process, both the Toshiba HDD for the Momentus XT and vice versa. Consequences (and solutions) I'm trawling for are the inability to create a clone bootable, the completeness and accessibility of the clone and align content makes this performance impact (with the exception of those to avoid due to the use of Windows 7).

  A friend I know that Ghost will properly manage the HARD disk and differences in size of the sector gracefully, avoiding the above consequences. I was wondering if freeware Paragon will handle this scenario as well. Paragon is free, but apart from the functional qualities, I would also consider ease of use in order to take a decision on the two.

  Thanks for any comment on the ability of Paragon freeware to manage this scenario, the comparison of usability of Paragon & Ghost for this scenario, and anything else you think is relevant in the choice between them for my scenario.

  Hello

  > Thanks for any comment on the ability of Paragon freeware to manage this scenario, the comparison of usability of Paragon & Ghost for this scenario, and anything else you think is relevant in the choice between them for my scenario.
  In my opinion, this question should be forwarded to the Paragon supports.
  http://www.Paragon-Software.com/support/
  Check the knowledge base or the forum of the community.

  From my point of view, you must first create a Toshiba Recovery disk.
  In this case, you are always secure you can set the laptop back to factory settings, even if the HARD drive was going to die or the system would begin to run crazy.

  I have used Ghost in the past in order to back up my files. I created an image of my two partitions bootable file and this race smoothly unfortunately cannot say on Paragon or compare both applications.

• Mobile graphics in tables, columns of different size from sizing

  I know it's basic stuff and I watched a video, but when I try to drag a graphic file on the right side in a table on my web page, I'm getting one of these circles with a slash that says that I am not authorized to do so. What could be blocking me? Also in an earlier version of DreamWeaver, I could click the table to make changes. I guess it's better to use css to define the sizes and functions. Anyone know a good online tutorial that can help me with tables in DreamWeaver cc? Thank you

  You are in Live view instead of design view.

  

  Direct does not drag images in the files in the document window.

• Shows scrolling differently on the screen/monitors of different sizes

  Hello

  I use DW mx 2004. I would like to know the following:

  -How to make scrolling of this doc fullness show any monitor or screen view it. I have the

  -I would like to know how to have a side table, while it does not move. It would be separate from the main table, but on the right.

  I hope this make sense...

  is attached to the web page and I'll post the code here as well.

  Akaya00 wrote:

  -How to make scrolling of this doc fullness show any monitor or screen view it. I have the

  Is not possible. The rendering of HTML page is dynamic and it is normal that it looks different at different screen resolutions, in different browsers,... the different operating systems. If you have a paragraph or a line of text in the view, use anchors in the code to move immediately to them.

  -I would like to know how to have a side table, while it does not move. It would be separate from the main table, but on the right.

  Create a DIV element and set its position to be fixed or static. Please see the help or a reference site on the internet for CSS style definitions and attributes.

  Mylenium

• How I let the user of the page can select images of different sizes when buy a print?

  Hi all!

  I'm currently trying to make a website in Adobe Muse CC 2015.1 that sells prints of photographs, however I would like to ensure that the buyer can select different sizes for printing and also other frameworks of size. How would I do this then it will affect the price results via paypal? This is something Ive been tempting for two weeks researching and haven't found anything, if anyone knows how to do this I really would appreciate it if I said.

  Thank you

  James Tucker

  I think it will be difficult to push the Muse within these limits. Small or greater step towards a solution of real e-commerce (with caddies, counting and paid and all) it is difficult of application skeleton Muse with just a PayPal button sell stuff.

  It is more useful and entirely possible to take a look at the other ways to integrate with a few small to mid-range e-commerce systems that play nice with Muse. MuseThemes has a nice article on this subject, in which they refer to their own connection widgets (like their widgets Ecwid and PayPal ). They mention also to the help of the Shopify buy button. BTW, Qooqee is a more capable Shopify widget !

  I hope this helps.

• Exact same menu in two different templates is a different size on the screen

  Hello

  Everyone has problems with the size of their menus? I have two master pages on my Web site, a home page and another one for the inside pages. I copy and paste the exact same menu for both of these templates, but for some reason any, as they appear on the Web site in different sizes. Can someone help me?

  Try to check the sizes in the transform menu. Which is located in the upper right, once an object is selected.

• Storage spaces for different size tables

  Hello
  
  I have a situation that everyone has probably, so I would go into more detail about this.
  Working with databases with different objectives, a single OLTP and OLAP one another, the two tables with different sizes... some with 1 M, some with 100 M and others with 150 G or more.
  
  Recommendation of the Oracle, so the suite all storage spaces are created in the form of LMT, but I don't know if I can put something else to optimize performance, such as reading or writing, once the databases have different objectives and therefore with different behaviors.
  
  If someone could help me how I should give attention, I really appreciate.
  The version of database can be regarded as 10g and 11g.
  
  Thank you.
  
  Alex

  No, really no need to worry about direct allocation tablespace in realtion to the performance of the queries. There are some operations such as the allocation of file extensions and tablespace performance impact scope object, but it can be difficult to see this. Just make sure your expandable size of file on the data files extension is large enough so that the next object needing another measure will also not wait as the file expand. With the maximum of a measure in a size auto-allouer tablespace is 64 M, a volume of measure G 1 file would be 16 degrees of object so 15 additional objects may expand (at this size) before a another file extension becomes necessary.

  What to do is determine if you want to count automatic sur-affectation to manage measurement of object allocations or to use uniform extensions so that each measure in the tablespace is the same size. If you use uniform extensions then you must make a choice of the same size for all or separate objects in small object and object of large size tablespaces and use a different scale for each size. Maybe 512K for small and 8 M wide. It's just a matter of how you want to manage your tablespace usage and growth.

  HTH - Mark D Powell.

• Multiple values for the same column in the columns of diffétent in the same row?

  Hi all
  I wonder how you can display different values for the same column in different columns on the same line. For example, using a CASE statement, I can:
  
  CASE WHEN CODE IN ('1 ', ' 3') THEN COUNT (ID) AS 'Y '.
  CASE WHEN CODE NOT IN ('1 ', am') THEN COUNT (ID) AS "N".
  
  Yes, that will produce two columns but will produce null values to empty and also two separate registers.
  
  
  Any ideas?
  
  Thank you

  Are you sure that this code works for you?

  Select ID
           ,CASE WHEN MODE_CODE IN ('1', '3') THEN COUNT( No) END as "Fulltime"
           ,CASE WHEN MODE_CODE NOT IN ('1', '3') THEN COUNT( No ) END  as "Other"
  From table
  group by ID
  

  I guess the code above fails because MODE_CODE is not in your group by?

  My suggestion would be to put the CASE in the COUNT:

  Select ID
           ,COUNT(CASE WHEN MODE_CODE IN ('1', '3') THEN No END) as "Fulltime"
           ,COUNT(CASE WHEN MODE_CODE NOT IN ('1', '3') THEN No END)  as "Other"
  From table
  group by ID
  

  CASE expressions return no. when the respective conditions are true and NULL otherwise.
  COUNTY will have non-null values.

• Disjoint working capital with images of different size?

  Each tutorial explains the disjoint rollover images MUST be the same size, etc..  But for the type of photos that I work with, it is impossible to make them the same height.  This site is exactly what I'll do with images of different sizes used: http://www.warmbloods-for-sale.com/HorseDetail.asp?HorseID=21333 & UserID = 1775.  No idea how they achieve this?  Or any ideas on how I can manage the same effect with different sizes in Dreamweaver CS4?

  Do a Google search for Lightbox, litebox, floatbox, or look at the Image Gallery Magic of the seven project.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB
  www.Alt-Web.com/blogspot.com

• Formatting of the crosstab columns

  Hello. I'm new to the discoverer and I had a question about the formatting of the crosstab columns (contour). The first column lists the names of our employees, while the following columns have different pieces of information, reporting on expenditures of employees (that's to say-accommodation, transport, etc.). When the drilling-down to get additional information (that is to say-destination), there are a few empty destination information (showing as a "0" ""), I want to get in shape. Here is an example of what the report looks like:
  
  Employee transportation accommodation meals
  JOE SMITH $100 200 $100 $
  Miami, FL 75 $50 $ $25
  Atlanta, GA $0 $ 75 $50
  * 0 * $50 50 $25 $
  
  Is there a way to format just the employee/exploration to read column s/o instead of '0', without affecting the data $0 in the other columns?
  
  I also tried to create a condition to replace any information 0 (null) by something else, but the State did not work. Anyone have any ideas?
  
  Thank you
  Erik

  Hello

  Try to set the property to show null values in the worksheet N.A and also use a calculation to show value of data in the PivotTable containing NVL (data element, 0).

  Rod West

• A target table is in charge of two different sources but the same columns, but a source is one database and another in a flat file.

  We all hope you are doing well.

  I have a business problem to implement in ODI 11 G. It's here. I'm trying to load a target table from two sources that have the same column names. But a source is to the file format and the other is in the Oracle database.

  That's what I think I'll create two mappings in the same interface by using the Union between the sources. But I don't know how the interface would connect to different logical architecture to connect to two different sources.

  Thank you

  SM

  You are on the right track, all in a single interface. Follow these steps

  (1) pull model of your data in the designer of the source file and your table model target to the target pane.

  (2) all relevant columns map

  (3) in the source designer to create a new dataset and choose as the UNION join type (this will create a separate tab in the source designer pane)

  (4) select the new dataset tab in the source designer pane and pull your source oracle table data model in the designer of the source. All columns that are relevant to the target card

  (5) make sure that your staging location is set to a relational technology i.e. in this case the target would be an ideal candidate because it is where the ODI will organize the data from source two files and oracle and perform the UNION before loading to the target

  If you want to watch some pretty screenshots showing the steps above, take a look at http://odiexperts.com/11g-oracle-data-integrator-part-611g-union-minus-intersect/

• Is it possible the reel with the variable column size?

  Hi, I'm queue to a CSV file with the following script (the SELECT real is different but similar, Oracle 10.2.0.3.0):
  

  SET COLSEP ';'
  SET FEEDBACK OFF
  SET LINESIZE 2000
  SET PAGESIZE 0
  SET TERMOUT OFF
  SET TRIMSPOOL ON
  SET VERIFY OFF
  
  SPOOL test.csv REPLACE
  
  SELECT 'COLUMN1', 'COLUMN2', 'COLUMN3' FROM dual UNION ALL
  SELECT 'value1', NULL, NULL FROM dual UNION ALL
  SELECT 'value2', NULL, NULL FROM dual;
  
  SPOOL OFF
  
  EXIT SUCCESS COMMIT

  Which produces the following output:
  

  COLUMN1;COLUMN2;COLUMN3
  value1 ;       ;
  value2 ;       ;

  Is it possible to get the following with the variable column size result
  

  COLUMN1;COLUMN2;COLUMN3
  value1;;
  value2;;

  I tried SET NULL "but I see no difference. Thanks in advance!
  
  Markus

  Hello

  SQL * Plus you button the output so that each column has a fixed length, which is exactly what you don't want.

  To get around this, concatenate all your data in a column VARCHAR2 fat with delimiters.

  For example, instead of

  SELECT    empno
  ,       ename
  ,       hiredate
  FROM       scott.emp
  ;
  

  Do something like

  SELECT    empno
  || ';' || ename
  || ';' || TO_CHAR (hiredate, 'DD-Mon-YYYY')
  FROM       scott.emp
  ;
  

• Why is the text of different sizes?

  Hello

  The text with this browser shows different sizes of text on a web page? Some is normal, then some is tiny. I you pinch the page upward to read the small text, normal text is very large. It ruins the reading a web page. Why this happens, and can I do about it? It's especially hard when he's on a forum.

  Thank you.

  Hello
  This issue has been resolved, but have a lot of ideas suddenly something to help you

  • questions/930928
  • questions/961736