Out of the blue my LCD monitor creates a distortion in the images and icons

Similar Questions

• reading the images and icons from jar file

  Hello
  I applied the tutorial in the corner of the adf
  [read the image of the jar file | http://www.oracle.com/technetwork/developer-tools/adf/learnmore/86-images-from-jar-427953.pdf]
  and deploy it in logical built-in web server
  my version 11.1.2.3 Jdeveloper
  
  but the images did not appear
  For example: when I drag the button and try to specify icon for this button no image for the library referance
  
  How can I fix this problem or missing steps in the application of the link above?
  Thank you

  I just ran this tutorial recently, took a few tries but everything worked according to the instructions in the article. You should check your steps on. set install to the top of the jar, add it to the project lib reference and use "/ adf/images / ' as the value of the icon. That should be all you need to do at the moment of the conception of the image displayed when running, you need to install the pot to your embedded wls and also change your weblogic - application.Xml.

• After my gateway mD2614u (64bits WHP) OS was wiped out by the virus and "projected blue" I installed my old version (Gateway), Vista 32 bit... it will be good?

  After my gateway mD2614u (64 bit WHP) OS was wiped out by the virus and "projected blue" I installed my old disk of Vista Home Premium 32-bit (gateway) to try to recover the operating system to 64-bit in fact somehow, it works fine after installing the network drivers appropriate. Would it be possible to retrieve an original os status or should I simply buy the disk recovery, or just be it? I know that tmi!

  # Migration from 32-bit to 64-bit Windows is OK but one backward migration is a problem because the 32-bit version of the installer cannot delete some items of 64-bit.  It produces a mixed version where you have taste strange anomalies a folder programs (x 86) and a programs folder.  Vista 32 bit shouldn't have a programs (x 86) folder.  Only 64-bit Vista has that.  He there's other, less obvious, issues.  Although you can retrieve files from the Windows.old folder the BONE itself is not trustworthy.  I tested the backward migration during the program Vista TechBeta and script scenarios has never supported by Microsoft Support after RTM due to 32-bit installation being unable to deal with the structure of the 64-bit system to remove.

  You must order the 64 bits of the gateway recovery disks (if still available) or a third party such as Recovery - Disks.com.

• How to move the "blue bar" with the start option and the clock and icons of a vertical__position on the left side of the screen to the bottom of the screen... has this before happen__once, can't remember what to do.

  How can I move the 'blue bar' with the start option and the clock and icons on the left side of the screen to the bottom of the screen.  It's happened before and I forgot how to move.

  Hello pookprec

  Here's how to do it

  .

• IPCC Express, option for the appellants out of the queue and leave a message.

  We are running 4.0 (5) IPCC Express improved. I need to configure our current ICD script so that when the appellants are held in the queue, they can press 0, out of the queue and leave a voice message. The ICD script we use is an exact copy of the script icd.aef by default on the system, it has just been copied and renamed. My question is, what are the steps I need to use the script to enable this feature?

  Two options. Option 1: Use the IPCC completely to save messages and manage messages as you seem to did so. Option 2: Transfer the caller to your voicemail number pilot and use your voice mail system to record the message.

  Steps to Option 1:

  1 early on in the script, use the step to read the Contact information call to capture the called number and save it as a variable.

  2. use the step to get a string to allow the caller to press 0 to leave a message. On the Filter tab, allow only the key 0 be hurry.

  3. in the leg successful step to get a string of digits, add the following steps.

  a. contact Dequeue step.

  b. reading quick step that contains a prompt that asks the caller to record a message after the tone.

  c. step recording, which records the message saved in a Variable of type "Invite".

  d. use the Terminate step to end communication with the appellant (you can add a quick step before that game if you want to tell the caller that the message has been saved).

  e. at this point, you can either use writing document step to record voice messages in a folder on the server of the IPCC, or you can use a series of other steps to place a call to the queue and play the message the following agent that meets, or you can attach it to an email and send it it make the address email of your choice (or a combination).

  I have this HUGE warning. I had several problems with what I've been able to overcome, but it requires a bit of diligence.

  -L' registration step requires a termination character (# or *). If the caller hangs just straight up, the script returns an exception and drop dead. You can manage the 'contactinactiveexception' using a step on the Exception and have it go to a label that you can put it as the first step under the leg successful registration step. In this way, if the user hangs up, the script handles the exception by going directly to the successful step. You can clear the exception just after that.

  -You will also want to handle this exception before Terminate step. If the caller hangs up and you try to put an end to this contact when he is no longer active, the script will always die, and the remaining steps will not run.

  We use the option to place a call in the queue. In itself, this requires a lot of thinking to make sure that the script is not die when an exception occurs. I ended up putting some exceptions in place where if there is a problem and that the recorded message never makes it to an agent, a log file is stored on the server as well as messages stored in a .wav file. Then, an email is sent to the contractor with these attachments also.

  Thus, it is as effective as make you it. Try to keep things simple at first, and then build on that to improve the experience of the appellants.

  Steps for Option 2:

  1. use the step to get a string to allow the caller to press 0 to leave a message. On the Filter tab, allow only the key 0 be hurry.

  2. in the leg successful step to get a string of digits, add the following steps.

  a. contact Dequeue step.

  b. call no redirection to the number voicemail pilot.

  I have not used this option, so I can't say with certainty how Callmanager will handle this call. The voicemail system will need to see the call as transmitted from a number that has a voice mail on the system account. If this does not work, you can use a dummy CTI Port with a fake extension that is configured to transfer to voicemail, then the voicemail box must be associated with the wrong extension. If you use Cisco Unity, you will also be able to use a routing rule to force the IPCC calls to a particular mailbox. Call the Viewer from the unity tools depot allows you to see the way in which the appeal is made to the unit.

  I hope that helps you and that it is not too verbose.

• How can I get rid of the square with the time and date in which pops out all the time and also the thing aside

  Would like to know if there is a way to get this huge place with date and time to turn off my computer and also the side thingy that comes out all the time and the date and time... it is frustrating to do something on my laptop and all of a sudden here they come out and I can not do a thing until I get them to go back whence they came there at - it a path to delete or if they are not all the time I don't really care for windows 8... Windows 7 was fine with me... not sure what to do thank you for your help frustrated

  What a kind screensaver which is scheduled to start after one minute of inactivity?

  What has happened since the first day?

  Another program or process is causing the problem, what happens if check you mode safe and a clean boot to see if you can find the cause?

  How to start Windows 8 in Mode safe
  http://www.bleepingcomputer.com/tutorials/start-Windows-8-in-safe-mode/

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

  If you test with another Windows user, rather than your current user, you have the same problem?

  Any chance of linking to, or provide a screenshot of what you see?

  How i: post a screen shot on this forum?
  http://answers.Microsoft.com/en-us/feedback/forum/feedback_other-na/how-to-insert-images-in-MS-answers/94a5cb36-A21F-4A6A-B266-611cf6c910c8

  How can I insert a picture in a reply to a message
  http://answers.Microsoft.com/en-us/feedback/forum/user/how-do-i-insert-a-photo-into-a-reply-to-a-post/17a15382-c587-44BB-9594-c0673c8402af

• I have an epson printer p950 and try to print from lightroom. I get lines across the image and Epson tell me I need to contact you to find out how to slow printing

  I have an epson printer p950 and try to print from lightroom. I get lines across the image and Epson tell me I need to contact you to find out how to slow printing

  Suggest you to reset preferences in Lightroom and then, check out: to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

• Zoom in and out on the image

  Hello!

  I need a simple solution to the ability to zoom in and out in and out of the image.

  It is not a card, just an image of 6400 x 4800 with a few 4-5 levels of zoom max.

  The solutions/tips/tricks/what whether?

  Thank you!

  Discover «localToGlobal»

• How to set the text to the center of the image and keep it responsive

  Hi, I'm new in Muse so Hello everyone

  I created a large image and add the text object that I placed in the Center. I have setup the image and width sensitive.

  Keep what reduction in size of the sensitive image browser, but the text is now high position relative to the browser.

  My question is how do you tell the text object to hold the center of the image? (As rather pin to pin object browser)

  Thank you

  I found this one:

  Text the PIN in the center of the image when using fluid width

  He answered my question but not yet a reasonable solution. Muse should allow us to group objects even with width and high sensitive. Another way is to allow pin object to.

• Hi Ive had lightroom 6 installed for three months now when I export my image the watermark is not on the image and it know test expired above were he know lightroom on top

  I export my image the watermark is not on the image and it know test expired above were he says lightroom on top

  Please create a new watermark with a completely new police force and then check.

  To pause Lightroom Mobile, click on your name on the top left corner and that there should be a drop-down list, you will see the option to Pause.

• blurring of the images and keep the average luminance

  I am cropping Visual attention - I work with black and white geometric patterns (think of checkerboards, swirls, etc.) and I want to take my images 'standards' and climb in different ways so that they look at novel but contain pixels of same exact like the original, so to keep their original average luminance.  I know how to use filters "distort" but I don't know if these maintain overall luminance or not... what I would ideally like to do is just highlight some parts of the image and move them, creating a mosaic of the original image.  Any suggestions?

  Thank you.

  I can't think a soloution a single click, but I tried the research of various effects of mosaic.  To do this manually you would need a repeating pattern like a hexigon.  You can use the form to eradicate the fields one at a time and copy into a new layer and then do a transposition of the word puzzle type.  Set your palette of layers in the large thumbnails so you can see what "tile" to pick up and move, or better yet, select the move tool and check "Auto Select" to the far left of the options bar.  I hope someone will come up with a simple solution for you.

• How to set up the images and captions after the import of Word 2007

  I have three general issues (ID CS4):

  • I haveMagi are placed inside the text block. How could I place them in any other place easily? If I try with the holding of the left button of the mouse, which is not possible. I have to cut it and paste it again. What is this possible.
  • How to create captions for the images and tables? I get Word of text style with a description. Maybe I need to number the pictures and tables. The common question is: is it necessary to number of images and tables in the SW user manual? I've seen a lot of documentations and there were not counted. There are common rules, when it is necessary to dial it and when not? If yes how can I do such a legend in InDesign? I tried it and I am so far, I can do it in a separate text frame for counter with text. It is the only way?
  • Import of untied the size table and the table is placed off the page. I didn't understand why ID has not regained the same size in Word 2007

  Please see my file:
  http://www.FlashMedia.cz/temp/import_word_2007.indd

  I answered this question, and we had a lively discussion. Yes, you

  create a separate text for captions. You can use automatic

  numbers, or type numbers in itself. If you do not understand the

  words in the discussion, or if you need more "hand holding" Guide

  through, I suggest that you look for some tutorials online.

  -

• sequential reading of the image and plot greyscale

  Hi all

  I have attached a VI wrote in LV version 8.2. All I am trying to make bed image sequence from a specified location in the PC and get the value in pixels for those of all of the images and want to save it in a file. When I run the vi it says error - 1074395995 IMAQ read file not found.

  Any help would be appreciated.

  Hi Theresa,

  As Andrey says put the extension on the end and it works. for example, change:

  'C:\Documents and Settings\Administrator\Desktop\Modulation speckle depth for Malinowski to low frequency\2Hz2.8Vpk-pkRHOE\2Hz20001' to

  "C:\Documents and Settings\Administrator\Desktop\Modulation depth of speckle to Malinowski to low frequency\2Hz2.8Vpk-pkRHOE\2Hz20001.jpg.

  or any file format are your photos.

  Thank you

• Since the download of google Chrome, the tabs and icons are so small, difficult to see

  Original title: visibility

  Since the download of google Chrome, the tabs and icons are so small, difficult to see.  I'm able to increase the fonts in the field but the tabs on top so small; any suggestions as how to increase?

  Hello
   
  Are you referring to tabs in Google Chrome?
   
  Please follow the given link of Google and check if that helps.
  http://www.Google.com/support/forum/p/chrome/thread?TID=2f545f0095bd642a&hl=en 

• When I make a video call, the image and sound frequently burst

  Original title: I.M video calls

  When I make a video call the image and audio break-up often so that the link falls down and I have to again open the link that can be very frustrating

  Hi geraldmallinder,

  1. What instant messaging program that you are using?

  2. were you able to make video calls before without any problem?

  3. you will remember to do recent changes on the computer before this problem?

  If you use Windows Live messenger, you can consult the following articles and check if that helps:

  Impossible to establish a webcam with Windows Live Messenger conversation

  Free chat: use instant messaging and webcam to stay in touch

  With the help of your LifeCam with Microsoft Live Messenger

  Hope this information is useful.