OVD Plugin Custom - attribute of the user LDAP recovery

Similar Questions

• Custom attribute in the model layer properties

  Hey all,.

  Can someone explain the flow of the program "ADF practice: using custom attribute in the model layer properties of". "" Basically, how change custom properties like "customLabel" changed the label attribute. Is there properties specific adf we can refer to properties for the attribute?

  Reference will also be useful.

  Thank you!!

  What exactly you want to know?

  It's pretty clear from what I've read:

  You can set properties that are customized for each attribute in a vo. This is done in the vo attributes dialog box where the default value.

  You can override the default values that is done in the setCustomHints() method. This method is called by the button in the user interface (actionListener = "#{bindings.setCustomHints.execute}" ")

  The inputtext is set to display the properties for the label (label = "#{bindings.") DepartmentName.hints.customLabel}') and uses the custom readOnly property (readonly = "#{bindings.") DepartmentName.hints.readonly}')

  As the inputText component is updated after the button clicked on (via a pertial in the inputText trigger), it shows the a values.

  Timo

• Update values dynamically in an attribute of the user who is the search field

  Hi all
  
  Can I have a pre process handler to update the values in the search field on my userpage to create? I have two user attributes: one is the default organization and the other is a country created by the user attribute. These two are lookup fields. I want to update the field of research by checking what is selected in the search field organization. Is this possible in IOM?
  
  Not sure if the process pre event handler is the way to go, but that's what I want to achieve. Can anyone guide me regarding the same?
  
  Thank you
  $id

  OK, here's my shot at a walkthrough... Let me know if I missed any steps.

  1. from your original post, you use two search boxes. I'm using a basic VM test, so I need to create two. I went with the city and State (I know they are OOB, but this is just an example).
  -Created Lookup.Custom.City and Lookup.Custom.State samples:
  Lookup.Custom.City
  Code key-Decode
  Miami-Florida
  Orlando-Florida
  New Orleans and Louisiana

  Lookup.Custom.State
  Code key-Decode
  Florida-Florida
  Lousiana-Louisiana

  -Creation of custom attributes UDF: Advanced-> user-> Actions Configuration-> the attributes of the user (LOV)
  -City Office and the State Office

  2 use weblogicExportMetadata.sh to export /metadata/iam-features-requestactions/model-data/CreateUserDataSet.xml

  3. change the CreateUserDataSet.xml to add:

  4. use weblogicImportMetadata.sh to import CreateUserDataSet.xml

  5 run. / PurgeCache ALL (same directory)

  6. go on request - create user (this example is for the provision of the basic application)

  7. If everything went well, when you select State, say Florida, then when you click on the search for the city, you will see Orlando and Miami. If you toggle the State of Louisiana, you will need to click on search again on the city and New Orleans should be the one that is displayed.

• user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  WinXP
  user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  I did a gpupdate/force and restart twice PC
  Yet, user indicate it is always admin when we right click on Start menu and see the possibility to open all users

  Hi elena_ad,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en/winserverManagement/threads

• Is there a way to check the attributes of the user in the Apex?

  When you create a user from the Apex, there is an option of radio button under the account privileges, bearing the mention "user is a developer. Is there a way to make an object page apex condition if the currently logged-in user (app_user) is a developer? What is the syntax for the verification of an attribute of the user?

  Chris10263447 wrote:

  When you create a user from the Apex, there is an option of radio button under the account privileges, bearing the mention "user is a developer. Is there a way to make an object page apex condition if the currently logged-in user (app_user) is a developer? What is the syntax for the verification of an attribute of the user?

  Use of the apex_util.get_user_roles function of the API, or the APEX_WORKSPACE_APEX_USERS.IS_APPLICATION_DEVELOPER of the view column query.

• Change the attributes of the user and configuration of resources

  Hello
  
  For the first look, I have a simple question. Where can I see changing attributes of the user and information about the history that did? I can see a upa_fields of the table, but there is no information on directors who did it.
  And the same question on resources. I need to get a way how to display information on the directors who provided resources for different users and administrators who have made changes in these resources. Y at - it all tables that can help me in it?
  Is there other variants of this information?
  
  I use OIM 11 g R1.
  
  Thank you.

  If you need only to know which revoked a resource, you can use this:

  Select usr.usr_login, obj.obj_name, ost.ost_status, rev.usr_login 'Revoker.
  Ouedraogo, usr, obi, obj, ost, usr rev
  where oiu.usr_key = usr.usr_key
  and oiu.obi_key = obi.obi_key
  and obi.obj_key = obj.obj_key
  and oiu.ost_key = ost.ost_key
  and oiu.oiu_updateby = rev.usr_key
  and ost.ost_status = 'revoked '.

  -Kevin

• WLST: definition of the attributes of the user

  Hello!
  I am very new to WLST. I managed to create new users and groups using WLST.
  
  But how to define attributes of the user using WLST? As for example the displayname.
  
  Thank you
  
  Published by: 900089 November 30, 2011 23:58

  I was able to establish the following:

  setUserAttributeValue-> empty: String (userName), String (userAttributeName), Object (newValue)

  No return value. My actual command looked like this:
  cmo.setUserAttributeValue ('BatMan', 'name', 'Bruce Wayne') where 'BatMan' is the 'userName', 'Name' is the attribute that you want to change, and "Bruce Wayne" is the new value to assign to the attribute. After that I checked in the console and now stood.

  The attribute can be found in the following:
  «serverConfig: / SecurityConfiguration/dstDev11/domains/myrealm/AuthenticationProviders/DefaultAuthenticator "replacing"dstDev11"with your bean name.»

• Custom attributes not visible user on the user profile in OIM 11 g

  Hello
  
  As I have created a custom attribute in OIM11g. I'm not able to view the attribute after that I have the Fund a user to IOM.
  Please help me to solve my problem.
  
  Thank you
  Srikanth

  It's a very basic thing. Just trying to create a permission policy , and you know how to do it. For your reference, I am also paste the excerpt from Metalink Article

  After the creation of the UDF, please follow the steps below to make the visible UDF for editing by the user admin:
  1. navigate to create a new 'authorization Policy' as below:
  a. login to the user interface and click Administration
  b. at the top left, you'll see the authorization policy tab
  c. now, click on create a permission policy
  2. Please use the information to create the following permission policy
  a. name: policy of the UDF
  (b) name of the entity: user management
  c. Permissionsc. Permissions:
  i. edit user profile
  User profile of view II.
  Please ensure that the UDF is selected in the attributes of these permissions.
  d. data constraints: all users
  e. policy assignment: all users
  3. create a user called "useradmin" and add the below 2 roles: "."
  a. all users (this is default)
  b. identity user administrators (this will provide administrative support to this user tab so that it can administer other users)
  4. create another end user called "testuser1" people the necessary fields.
  5. now connect as "useradmin.
  6. search a user called "testuser1" and open the user.

• IOM 10 g: identifiers based on the attributes of the user during deployment of OID?

  I know that, by default, the connector of the OID used identifiers stored in the ldapUserObjectClass attribute in Lookup.OID.Configuration to determine identifiers to assign new users from OID LDAP.
  
  Is there a way to change this based on a user IOM attribute? For example, a person in the Department "and 10" Gets an extra objectclass custom on their file OID.
  
  The only way I thought of doing this is to manage him post-créez and add customized directly in the LDAP protocol identifiers.
  
  Is there a better and cleaner approach?

  There is no default functionality that allows you to choose the identifiers. If you want to do this, then Yes, you need to encode an adapter to add the objectclass using your own code whenever necessary.

  -Kevin

• Custom attribute in the patch ACS4.2 17

  I have an optional custom attribute in my ACS group to pass on ACE config mode: shell: Admin * Admin by default-field

  Privilege level 15 is also part of the configuration of the exec.

  

  Recently I applied the patch 17 on ACS 4.2 (0) build 124. Since then I can not connect with the level of privilege 15 in IOS routers/switches.

  Looks like IOS box considers this attribute custom as a mandatory now.

  ---------------------------------------------------------------------------------------------------

  Debugging IOS (Cat6500, 12.2 (33) SXJ4):

  May 27, 13:23:56.819: MORE: application created for 61929 (pehruby)

  May 27, 13:23:56.819: MORE: previously set server group Ganymede 10.105.24.44 +.

  May 27, 13:23:56.819: HIGHER (0000F1E9) / 550052 A-4/NB_WAIT/0: started 5 sec timeout

  May 27, 13:23:56.819: HIGHER (0000F1E9) / 0/NB_WAIT: made event 2

  May 27, 13:23:56.819: HIGHER (0000F1E9) / 0/NB_WAIT: 62 bytes written requests

  May 27, 13:23:56.819: HIGHER (0000F1E9) / 0/READING: made event 1

  May 27, 13:23:56.823: HIGHER (0000F1E9) / 0/READING: would block during playback

  May 27, 13:23:56.823: HIGHER (0000F1E9) / 0/READING: made event 1

  May 27, 13:23:56.823: HIGHER (0000F1E9) / 0/READING: read all 12 byte header (wait for data 51 bytes)

  May 27, 13:23:56.823: HIGHER (0000F1E9) / 0/READING: made event 1

  May 27, 13:23:56.823: HIGHER (0000F1E9) / 0/READING: read all the answer 63 bytes

  May 27, 13:23:56.823: HIGHER (0000F1E9) / 0 / 550052 A 4: the package of treatment response

  May 27, 13:23:56.823: MORE: handled AV priv-lvl = 15

  May 27, 13:23:56.823: MORE: could not decode a unknown AV hull: FAIL

  May 27, 13:23:56.823: HIGHER (0000F1E9) / 0/REQ_WAIT / 550052 A 4: expired

  May 27, 13:23:56.823: MORE: Protocol is set to None. Jump

  May 27, 13:23:56.823: MORE: AV = shell shipping service

  May 27, 13:23:56.823: MORE: sending AV cmd *.

  ACS TCS.log (different time, same attempt):

  TC 27/05/2013 11:59:39 I 0043 5088 0 X 15< packet="" to="" client:10.106.11.114="" type:author/pass_add,="" seq="" 2,="" flags="">

  TC 27/05/2013 11:59:39 I 0043 5088 0 X 15 SESSIONID-998342923 (0XC47E7EF5), DATALEN 51 (0 X 33)

  TC 27/05/2013 11:59:39 type I 0043 5088 0 x 15 = AUTHOR/RESPONSE status = 1 (AUTHOR/PASS_ADD)

  TC 27/05/2013 11:59:39 I 0043 5088 0 x 15 msg_len = 0, data_len = 0 arg_cnt = 2

  TC 27/05/2013 11:59:39 I 0043 5088 0 x 15 size arg [0] = 11 = priv-lvl = 15

  TC 27/05/2013 11:59:39 I 0043 5088 0 x 15 size arg [1] = 32 = shell: Admin * Admin by default-field

  TC 27/05/2013 11:59:39 I 0043 5088 0 x 15 end >

  ------------------------------------------------------------------------------------------------------------------------

  Debugging IOS (C1841, 12.3 (14) T7):

  May 30, 12:21:58.248: AAA/BIND(00000A52): link i / f

  12:21:58.272 30 may: AAA/AUTHOR (0xA52): list of selection method "acs."

  12:21:58.272 30 may: MORE: AAA Queuing 2642 authorization for treatment

  12:21:58.272 30 may: HIGHER: processing of the application for authorization id 2642

  12:21:58.272 30 may: MORE: Protocol is set to None. Jump

  12:21:58.276 30 may: MORE: AV = shell shipping service

  12:21:58.276 30 may: MORE: sending AV cmd *.

  12:21:58.276 30 may: MORE: application created for 2642 (ph)

  12:21:58.276 30 may: MORE: previously set server group Ganymede 10.105.24.44 +.

  12:21:58.276 30 may: HIGHER (A 00000, 52) / 656FB000/NB_WAIT/0: started 5 sec timeout

  12:21:58.276 30 may: HIGHER (A 00000, 52) / 0/NB_WAIT: made event 2

  12:21:58.276 30 may: HIGHER (A 00000, 52) / 0/NB_WAIT: 59 bytes written requests

  12:21:58.276 30 may: HIGHER (A 00000, 52) / 0/READING: made event 1

  12:21:58.276 30 may: HIGHER (A 00000, 52) / 0/READING: would block during playback

  12:21:58.280 30 may: HIGHER (A 00000, 52) / 0/READING: made event 1

  12:21:58.280 30 may: HIGHER (A 00000, 52) / 0/READING: read all 12 byte header (wait for data 51 bytes)

  12:21:58.280 30 may: HIGHER (A 00000, 52) / 0/READING: made event 1

  12:21:58.280 30 may: HIGHER (A 00000, 52) / 0/READING: read all the answer 63 bytes

  12:21:58.280 30 may: HIGHER (A 00000, 52) / 0/656FB000: the package of treatment response

  12:21:58.280 30 may: MORE: handled AV priv-lvl = 15

  12:21:58.280 30 may: MORE: could not decode AV shell: Admin * Admin by default-field - PASS - PASS

  May 30, 12:21:58.284: AAA/AUTHOR/EXEC(00000A52): AV cmd = treatment

  May 30, 12:21:58.284: AAA/AUTHOR/EXEC(00000A52): successful authorization

  ACS.log:

  TC 30/05/2013 12:21:58 I 0043 1280 0 X 0< received="" from="" client:10.106.0.50="" type="AUTHOR," seq="1," flags="">

  TC 30/05/2013 12:21:58 I 0043 1280 SESSIONID 0 X 0 1990425999 (0X76A37D8F), DATALEN 47 (0X2F)

  TC 30/05/2013 12:21:58 I 0043 1280 type 0 x 0 = AUTHOR, priv_lvl = 1, authentic = 1

  TC 30/05/2013 12:21:58 I 0043 1280 0 x 0 METHOD = Ganymede +.

  TC 30/05/2013 12:21:58 I 0043 1280 SVC 0 X 0 = 1 USER_LEN = 2 PORT_LEN = 6 REM_ADDR_LEN = 12 ARG_CNT = 2

  TC 30/05/2013 12:21:58 I 0043 1280 0 x 0 USER = ph

  TC 30/05/2013 12:21:58 I 0043 1280 PORT 0 x 0 = tty195

  TC 30/05/2013 12:21:58 I 0043 1280 0 X 0 = 10.106.33.22 REM_ADDR

  TC 30/05/2013 12:21:58 I 0043 1280 0 x 0 arg [0](size=13) = service = shell

  TC 30/05/2013 12:21:58 I 0043 1280 0 x 0 arg [1](size=4) = cmd *.

  TC 30/05/2013 12:21:58 I 0043 1280 0 X 0 END >

  TC 30/05/2013 12:21:58 I 0850 3244 1 allocated connection wire work unique 0xf

  TC 30/05/2013 12:21:58 I 0143 3244 0xf author data: phtty19510.106.33.22service = shellcmd. = 13362timezone = MEZservi

  TC 30/05/2013 12:21:58 I 0163 3244 0xf - excerpts from the info service

  TC 30/05/2013 12:21:58 I have 0189 3244 0xf - Checked NARs

  TC 30/05/2013 12:21:58 I 0199 3244 0xf - implemented Reqs:

  TC 30/05/2013 12:21:58 I 0209 3244 0xf - a profile

  TC 30/05/2013 12:21:58 I 0261 3244 0xf - executed

  TC 30/05/2013 12:21:58 I 0263 3244 0xf - set of controls done clean

  TC 30/05/2013 12:21:58 I 0265 3244 0xf - version NDG provided

  TC 30/05/2013 12:21:58 I 0043 3244 0XF< packet="" to="" client:10.106.0.50="" type:author/pass_add,="" seq="" 2,="" flags="">

  TC 30/05/2013 12:21:58 I 0043 3244 SESSIONID 0XF 1990425999 (0X76A37D8F), DATALEN 51 (0 X 33)

  TC 30/05/2013 12:21:58 I 0043 3244 0xf type = AUTHOR/RESPONSE status = 1 (AUTHOR/PASS_ADD)

  TC 30/05/2013 12:21:58 I 0043 3244 0xf msg_len = 0, data_len = 0 arg_cnt = 2

  TC 30/05/2013 12:21:58 I 0043 3244 0xf arg [0] size = 11 = priv-lvl = 15

  TC 30/05/2013 12:21:58 I 0043 3244 0xf arg [1] = 32 = shell size: Admin * Admin by default-field

  TC 30/05/2013 12:21:58 I 0043 3244 0xf end >

  PuTTY session:

  Connect as: ph

  [email protected]/ * / password:<------ (10.106.0.16="" and="" 10.106.0.50="" are="" ip="" addresses="" of="" the="" same="">

  1841_hra_lab >

  1841_hra_lab ><------ i'm="" not="" in="" enable="" mode="" (priv.level="">

  --------------------------------------------------------------------------------------------------------------------

  Unfortunalety I don't have newspapers/debug of the period before the update, when everything was ok.

  I guess that the problem is somewhere in this argument that goes from the ACS to the customer:

  TC 30/05/2013 12:21:58 I 0043 3244 0xf arg [1] = 32 = shell size: Admin * Admin by default-field

  Can someone tell me how this argument with the option setting should look like?

  Maybe * shell: Admin * Admin by default-field?

  Petr

  Hi Peter,

  You are using in a default.

  CSCth75577    ACS incorrectly sends optional custom attributes GANYMEDE +.

  Symptom:

  Authorization GANYMEDE + IOS fails if client attributes (even as an option) are configured on the ACS user group.  The connection will work, but the attributes passed will be not honored.

  Conditions:

  ACS 4.2.0.124 patch 16

  ACS 4.2.1.15 patch 2

  Workaround solution:

  Return to a previous fix ACS.

  This problem has been fixed in

  ACS 4.2.1.15 patch 3 or later.

  Upgrade of the ACS to 4.2.1.15 and apply the latest patch 10.

  Jatin kone
  -Does the rate of useful messages-

• Custom privileges for the user, MSE 8510 blade

  Hello!

  Does anyone know if it is possible to create a user account on the MSE 8510 blade with 'custom' privileges more than the preconfigured settings?

  Example: You can create a user who can display one or more conferences (and only) and "limited control" for those conferences WITHOUT giving the user the ability to view/edit other conferences?

  Kind regards

  OLA

  HI, Ola,

  I'm afraid that this is not possible at the moment, and my suggestion here is to wear a request functionality, through the Key Account Manager - based on the effect of nbusiness this feature has on your business, we can consider this to be implemented.

  Currently there are 7 different level privileges, but none of the people not can be customized, as requested.

  The levels of prvivilegel are:

  1 Administrator

  2. conference creation and control

  3. creation and restricted control conference

  4. creation of the Conference

  5. details of conference

  6 conference list more streaming

  7 list Conference only

  Please let me know if you need more details about each individual privilege.

  Concerning

  Cristian

• Getting the values for the attributes of the user in IOM

  Hello

  I have it here is the snippet of code that retrieves the values for all the attributes user OIM 11g. But this code returns the exception of null pointer for attributes with null values. I also put if condition to check for null pointer exception, but always the null value is thrown in the newspapers whenever this code snippet is executed in the event handler.

  Any thoughts?

  private Map getUser(String userKey) {
    Map users = new HashMap();
    User user = null;
    UserManager userManager = (UserManager) Platform
    .getService(UserManager.class);
    try {
    user = userManager.getDetails(userKey, null, false);
    logger.log(ODLLevel.FINE, "User: {0}",new Object[] { user });
  
    } catch (NoSuchUserException e) {
    logger.log(ODLLevel.ERROR, e.getMessage(), e);
    } catch (UserLookupException e) {
    logger.log(ODLLevel.ERROR, e.getMessage(), e);
    }
    Set AttrNames = user.getAttributeNames();
    logger.log(ODLLevel.FINE, "User Attributes: {0}",new Object[] { AttrNames });
  
    Iterator itr = AttrNames.iterator();
    while (itr.hasNext()) {
    try {
    String AttrNAme = itr.next().toString();
    logger.log(ODLLevel.FINE,"Current Attribute is : {0}::",new Object[]{AttrNAme});
    if( user.getAttribute(AttrNAme).toString()!=null && user.getAttribute(AttrNAme).toString().length()!=0){
    String AttrValue = user.getAttribute(AttrNAme).toString();
    logger.log(ODLLevel.FINE,"Attribute: {0} and Value: {1}",new Object[]{AttrNAme,AttrValue});
    users.put(AttrNAme, AttrValue);
    }
    } catch (Exception e) {
    logger.log(ODLLevel.ERROR, e.getMessage(), e);
    }
    }
    return users;
    }
  

  TIA

  A call to ToString on null will give you the exception. You should check that the value is not null before calling toString() on it.

  In addition, you must perform an additional control on the user object that you receive after your try catch block. If the user object is null, then there is no need to run code on the user object.

• How update the attribute of the user of IOM in tasks

  Hi all

  I need to initialize an attribute for all users of the IOM. I created a task where I use the following code:

  ...

  UserLogin string = "";

  < String > retAttrs value = new HashSet < String > ();

  retAttrs.add (AttributeName.USER_KEY.getId ());

  retAttrs.add (AttributeName.USER_LOGIN.getId ());

  retAttrs.add (AttributeName.PASSWORD.getId ());

  ...

  UserMap HashMap < String, String > = new HashMap < String, String > ();

  UserManager usermgr = Platform.getService (UserManager.class);

  User < user > list;

  try {}

  SearchCriteria criteria;

  criteria = new SearchCriteria (AttributeName.USER_LOGIN.getId (), "*", SearchCriteria.Operator.EQUAL);

  users = usermgr.search (criteria, retAttrs, null);

  for (user: user) {}

  System.out.printf ("username: % s\nStatus: % s\nPassword: %s\n\n", userLogin, userStatus, plainTextPassword);

  user.setAttribute ("ClearPassword", plainTextPassword);

  usermgr. Modify (User);

  }

  } catch (UserSearchException e) {}

  e.printStackTrace ();

  } catch (ValidationFailedException e) {}

  e.printStackTrace ();

  } catch (UserModifyException e) {}

  e.printStackTrace ();

  } catch (NoSuchUserException e) {}

  e.printStackTrace ();

  }

  ...

  "This 'update' method does not work for me and I see the error:

  < 22 January 2015 13:09:07 THIS > < error > < oracle.iam.identity.usermgmt.impl > < BEA-000000 > < usr_key is an attribute of the system and cannot be set through the API. >

  oracle.iam.identity.exception.ValidationFailedException: IAM - 3056148:usr_key is an attribute of the system and cannot be set through API.:usr_key

  at oracle.iam.identity.usermgmt.impl.UserManagerImpl.modify(UserManagerImpl.java:624)

  ...

  "

  Please, can you tell me what is the problem?

  Thank you very much!

  Milan

  You must add a few lines in your code and change some

  List of users;

  try {}

  SearchCriteria criteria;

  criteria = new SearchCriteria (AttributeName.USER_LOGIN.getId (), "*", SearchCriteria.Operator.EQUAL);

  users = usermgr.search (criteria, retAttrs, null);

  for (user: user) {}

  System.out.printf ("username: % s\nStatus: % s\nPassword: %s\n\n", userLogin, userStatus, plainTextPassword);

                             User newUser = new User (user.getEntityId ());

                    

  newUser.setAttribute ("ClearPassword", plainTextPassword);

                            usermgr. Modify (newUser);

  }

• How to impose the task dynamically to the user LDAP?

  I need to entrust the task to the user based on their number that ends with the xml request. I want to know, how we can configure the human task, i.e. the mission assigned to the user based on the employe_id of the LDAP?
  
  Published by: 949691 on August 29, 2012 14:49

  Looks like you pass the variable with the user id iinto human task of Interactive activity and one of the elements is the LDAP id.

  Open the human task, click on the assignment tab-> double-click the icon of the performer in the Center-> change the dropdown to "Build a list of participants to help" for "names and Expressions"-> click the 'more'-> click 'Add a user'-> change 'Data Type' drop-down list selection to "by the Expression"-> click on the button «...» "in virtue of the 'value'-> expand the 'task'-> expand" task: payload "-> select the variable that you set the user id.

  Dan

• How to provide custom information to the user in the InfoBar

  In a previous thread (authorization re - data charges Essbase without erasing existing data it has been suggested that it is possible to provide information to the user via the 'information' window. I guess that this refers to the information bar window that appears when performing different tasks in web client FDM?
  
  If so, how you get there? The Administrator's guide is only seems to point to Administration | Web settings, where you can customize the behavior of the information bar. But is it possible to load the message and set the type of message (info, warning, error) from a script of the event?

  Yes, you can fill a script of the event. There is an accelerator of General utility to "Display the information bar Message".