P2314H, LCD conditioning does not seem to work

Similar Questions

• How to unlink a text box? Break in the menu icon does not seem to work.

  How to untie the two text boxes?  The break in the menu link icon does not seem to work.

  Hello

  We would like to know the following details from you to help you to come.

  (1) what application you want to use?

  (2) text box are what line you referring?

  (3) what version of the Windows operating system you have installed on your computer?

  (4) what happens when you click on the pause icon

  Your answers are important to us. Please write to us with more description of the issue so that we can understand the question better to help you.

• PowerConnect 6200 ACL does not seem to work

  Hello

  I have a total of four 6248 s two groups at different locations that are configured with VRRP + OSPF.  I tried to set up a simple ACL on either a VLAN to allow a portion of the traffic and block everything else, but I can't make it work.  I have tried many combinations to try to get this working, but so far without success.  It's just a simple ACL, which should allow the web/http traffic on the 10.1.30.100 server and blocks everything else.

  The only type of ACE that seem to work are either a "deny ip any any" or "permit ip any any" If you try an ACE with a destination host and subnet mask 0.0.0.0 it's just all this blocking.  Has anyone else had problems of the ACL or is it just my incompetence in preventing me from getting the 6200 ACL work properly?  I didn't have this problem, get the ACL list to work on our Cisco 2811 routers, just at the moment where I tried on the PC6248s.

  1. config
  2. int vlan 720
  3. no ip-group vlan720-in in access
  4. output
  5. No list of access-vlan720-en
  6. access-list vlan720-in permit tcp any 10.1.30.100 0.0.0.0 eq 80
  7. int vlan 720
  8. IP access-group vlan720-in in
  9. output
  10. output
  11. copy, run start
  12. There

  Just an update on this issue.  I worked with Dell to determine why the ACL does not seem to work.  We discovered that the 6200 apply ACL to the traffic as a VLAN ACL Cisco card as opposed to a router ACL entry.  This causes the ACL to apply to not only routed or transferred but also traffic switched in the same VLAN.

  This has been the source of my problems that my traffic is not limited to a single 6200.  I developed a simple laboratory to check that the 6200 applied traffic switched in the same VLAN ACL.

  First the 6200 has one ACL applied to VLAN5 both PC1 and PC2 are in VLAN 5.  They are both on the same subnet 192.168.5.0/24.  The ACL has a statement of "permit icmp any one" but nothing else.  The PC1 and PC2 are running Windows XP Pro with IIS is installed for the test.  The firewall on both is disabled.

  PC #1 IP: 192.168.5.2/24
  PC #2 IP: 192.168.5.3/24

  [6200]
  |    |
  |    |
  |   [2950T #2] <-->[PC #2]
  |
  |
  [2950T #1] <-->[PC #1]

  In this scenario PC1 and PC2 can ping each other without problem because of the permit icmp any any statement, but you cannot access the IIS site on each of the other computers.

  Dell said that this is normal and if you want communication VLAN VLAN you 'license ip ' to make it work properly.  I also found that traffic back from other VLANs were also denied because of the ACL applied on all of the incoming traffic.  As a solution, the license statement should be included for ALL traffic back to the limited subnet other subnets.  So in this case "ip enable any ".

  I find it a bit annoying that ACL is applied in the form of maps of VLAN not like real incoming router ACL as they are on similar Cisco devices as the 3750.  So there is a work around.  I hope they can solve the problem in a future update, because I really think that the 6200 is a great device.

  Here you can see the difference between VLAN ACLs cards and router entry ACL where they are applied in what concerns local traffic to VLAN.
  http://www.Cisco.com/en/us/docs/switches/LAN/catalyst3750/software/release/12.2_25_see/configuration/guide/swacl.html#wp1572522

• Internet does not seem to work after you have uninstalled Avira Premium Edition, but Google Chrome works

  Recently, I uninstalled Avira Premium Edition. I opted for 1 month trial but I uninstalled before the expiry of 1 month. The uninstall process went well. But when I restarted the computer, the Internet does not seem to work, but Google Chrome works as usual. When I tried to connect to MSN, it says "error Code: 80072ee7. It's something on the Internet connection. I guess it takes some files that must have accidentally disappeared with the uninstall process.

  Any help will be greatly appreciated. Thank you.

  Hello

  If Internet does not cam chrome Google work either.

  So, we know not what does not work.

  In any case, try this.

  
  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP just replace the command typed with.

  netsh interface ipv4 reset Press enter

  netsh interface ipv6 reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• FSX does not seem to work.

  FSX does not seem to work and when I press the ALT key, nothing appears in the upper part of the screen. In addition, the mouse cursor becomes black if it isn't in arcade mode (CTRL + Y). Does anyone know how this can be fixed? Thank you! :)

  Hello

  Please report the problem to Microsoft Community.
   
  We suggest you to contact support FSX.
   
  See the links below for assistance.
  http://marketplace.Xbox.com/en-AU/product/Flight-Simulator-X/66acd000-77fe-1000-9115-d8044d530935
   
  http://support.Xbox.com/en-us/?XR=shellnav
   
  I hope this helps. If you have any other queries/issues related to windows, write us and we will be happy to help you further.

• BBC Iplayer - Flash Player Error ("content does not seem to work")

  Hello

  I use a Mac OSX El Capitan-version 10.11.3

  Browser Safari version 9.0.3

  Flash Player version 21.0.0.197

  The problem:

  Various shows on the BBC Iplayer play and displays the following message: this content does not seem to work. "Please try again later".

  It occurs on all the shows, but a bit random. When I right click in the window of the video I get this, tells me that there is a "Flash 1024 error."

  

  When I copy the content, the error is:

  Error code: EmpBaseErrorVO

  code = 1024

  type = either reading is possible due to a mistake of the mediation

  Details =.

  1026

  severity = critical

  responsibility = MediaSelector

  Info = 1026

  I tried constantly to turn ugly. No online forums provide clarity. Can someone from Adobe explain please what means this error and what I can do to solve this problem?

  Thank you

  Hello

  This started after 21.0.0.197 updated?  It worked very well in the previous (21.0.0.182) version?

  You have installed/activated advertising blockers?

  You access the site through the VPN?

  You have installed security software/utility?  If so, which?

  It works with other browsers (Firefox, Chrome, etc.)?

  --

  Maria

• I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?

  I have a version of the education of the CSuite 6 design and web premium. Bought a new mac without DVD drive and now I have no idea how I can install it on my laptop. S/N does not seem to work. Can anyone help?

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  Quickly find your serial number

• Default sort of the classic report does not seem to work

  4.2.1

  THM 2

  I have a classic report consisting of an underlying sql with 3 unions. The columns include a party_name (varchar) and two numeric fields.

  for example only select total_cost, cost_to_company, party_name, apex_item.checkbox2(1,party_id)

  (

  Select a.party_id, a.party_name party_name, a.cost_to_company, table a.total_cost when certain conditions

  Union

  Select a.party_id, a.party_name party_name, a.cost_to_company, table a.total_cost when certain conditions

  Union

  Select a.party_id, a.party_name party_name, a.cost_to_company, table a.total_cost when certain conditions

  )

  In our real-world scenario, these three applications are on different tables and different even if some elements are all the same (including the type of data, etc.), where the union

  Because I need activate sorting using the report attributes. I put the tri reporting attributes such as 1 - total_cost desc, 2 - Party_name growing.

  However, when we run the report, if the total_cost for different parts is 0, the sorting should be based on party_name. That does not seem to happen. It still sorts out randomly. I'm wonderingm if it's because there are trade unions and no order of in the query.

  No idea how to solve this problem?

  Nothing to do with unions.

  It looks like it is connected to your thread previous marking dynamically of columns in a "BOLD" for the highest value report. Is it? If so, where are the links generated to conditionally and other HTML elements? They are more likely to cause sorting problems. Instead of posting question after question about one aspect of the problem after another, you get a solution much faster together by creating an example on apex.oracle.com and specifying the complete requirements.

• CS4 share fonts does not seem to work

  I followed the documentation (I think), but it doesn't seem to work.

  I have a root document that loads a bunch of SWF files out of a 'model' that uses two fonts. Rather than integrate the fonts on every swf I if I incorporate in the calling document and share them. The documentation explains to export them to share and give give them the identifier string and a URL. AS3 however does not provide the identifier string so I guess it is supposed to work with the name of the class. Regarding the URL I'm him giving the name of the document compiled root (home.swf). I then copied the fonts in the library of the document calling for the library of one of the documents called. I then told the police pasted the symbol properties for import for the sharing of life and added home.swf in the URL field. Sovereign wealth funds are all in the same directory, but when I compile the home.fla and call the swf there is no visible text. No errors appear.

  What I am doing wrong?

  David

  embed fonts of static text makes no sense because of the way flash handles static text.

  and Yes, the static text characters are converted to outlines and display the same for everyone just like any graphic your creation in flash.

  and if you want to reduce the size of the file, use a device for static text.  then, without contours must necessarily be in your swf file.

• How will I know that my Windows product key is if one on the sticker that is located on the computer does not seem to work?

  You want more details. For two hours I answered all the questions that ask you that. And still no support. You up to the date of this laptop, every day at 03:00, so don't tell me the product key, which is on the back of this box is incorrect. Or that it is not the country I say. Just send me what is on the back of this box, which I paid too much for in the first place.

  We are not Microsoft. We are volunteers who give of our spare time to help people. Complain about Microsoft is a waste of time. We are in the same boat as you when it comes to most of the problems and not more control or access that you have to do.

  A product key is not in the box where everyone can see.  It is a sequence of alphanumeric 25 digit of 5 sets of 5 digits separated by dashes for the operating system.  If this is the original installation, the key will be on a label on the underside of the laptop.  It has been upgraded or purchased as a product of the retail (suggested by saying you that you have a box), then the product key for the product to the retail sales would have been on a piece of paper inside the box.  The product key on the label of the laptop would have been crushed (which would have been in the computer would have been product key from the manufacturer that could not be used to enable or provide proof) by installing the retail or upgrade.  Microsoft has no idea what is your product key regardless of the case - even if you bought them (unless it was by a download and then you should have an email from their share with the product key to this topic).

  If this is not a problem of activation or re-installing and that you have installed and activated the product yourself, try of Belarc Advisor http://www.belarc.com/free_download.html and see if the product key, it reveals work best of all what you use now.

  For more information, if it does not help, post to http://answers.microsoft.com/en-us/windows/forum/windows_install?page=1&tab=all&tm=1300700638376.

  Good luck!

• Used palmone Zire 31 does not seem to work?

  Hi, I went to an antique store today and find a palmone Zire 31 for two dollars, so I decided to do. It has no cables, CD, anything. It's just the palmone zire 31 device and the thing of the pen. Well, I found a few USB cables that correspond to the House for my camera and stuff but when I plug the slightly illuminated screen. I thought it was good, but my computer doesn't recognise no and says it fails. Does this mean that it does not work? Should I just forget and not buy a new cord for this? Or are there special drivers, I need to work. And when the screen informed he would not light, up evenly, the sides light up a lot more, then the Middle so it couldn't just be broken and sold for parts. Wells and suggestions? Thank you

  I just went to bestbuy and tried the Chargers and my zire 31 will not even load or anything like that. If the mines a cool looking for paper weight.

  Thanks for the help, and I will pass on your offer on the zire.  Thanks tho

• Adobe Photoshop CC 2015 is compatible with Windows 10. The mine opens, but does not seem to work correctly... INCREDIBLY slow. Does not. Must I return to Windows 8?

  Adobe photoshop cc 2015 is compatible with windows 10? Just upgraded Windows 8 and PS opens but does not work properly. INCREDIBLY SLOW. What I can do or should I return to Windows 8? Windows love 10. Disappointed.

  Hi Ravenm,

  Could you please check and make sure that Photoshop is updated to the latest version 2015.1.2

  Also, please try the steps in the following article: Optimize performance Adobe Photoshop CC

  Let me know if it helps.

  Concerning

  Tanuj

• Org API does not seem to work

  Hello
  
  I have a requirement where I need to check if the name of the organization that is being passed to the adapter already exists some IOM. But my tcOrganizationOperationsIntf doesn't seem to work. To check what is the case, I've even hard-coded the value as follows:
  
  HashMap < String, String > orgMap = new HashMap < String, String > ();
  orgMap.put ("The Organizations.Organization name", "Xellerate Users");
  orgMap.put ("Organizations.Type", "Organization");
  tcResultSet orgSet = orgOper.findOrganizations (orgMap);
  System.out.println ("Number of rows" + orgSet.getRowCount ());
  
  But I get the number of lines equal to zero. Someone at - he met such a situation where the API doesn't seem to work. What should I do?
  
  Thank you
  PETREA

  I was talking about STANDARD types.

  Now, it is not strange. The user you are using to call the API doesn't have permissions on the organization. Do 1 thing, affect of ALL_USERS under the administrative groups in the Organization and see the magic.

• GTX 570 and first CS 5.5: engine reading Mercury does not seem to work

  Hello world

  I get choppy playback and a red bar on first CS5.5 whenever I apply to a clip of one of these effects: no effect on the deformation, the noise alpha folder or the Magic Bullet Looks 2.

  The sequence is an AVCHD 1080/24 p, first preset and multimedia files are AVCHD to a GH2 (1080/24 p to 24 Mbps).

  My system is more or less like this:

  • Motherboard: Gigabyte Z68X-UD4-B3
  • Processor: Core i7 2600 k
  • RAM: 16 GB DDR3 Kingston HyperX 1600
  • Graphics card: Gigabyte GTX 570 1280 MB (it comes factory overclocked)
  • (Only a screen 1920 * 1080 is attached to the graphics card right now)
  • Hard drives: 3 Western Digital Caviar Black 1 TB set out the following:

  OS c:, Program Files, swap file

  g: the project files and media

  h: Previews

  And now the symptoms: sequence In an AVCHD 1080/24 p with clips AVCHD 24Mbps, all in the same video track, whenever I have applied an effect of alpha folder, Magic Bullet Looks, or noise of deformation (and probably no hardware acceleration effect) render bar changes from yellow to red and I get choppy playback unless I set the resolution of reading to 1/2. If I change the playback engine Mercury adjustment of the hardware to the software as usual. So I think that the GTX 570 does not work with first CS5.5 for some reason any. In this thread (http://forums.adobe.com/message/3736541) some people had even complained. Also feels quite slow. For example, a clip of 30 seconds with an applied effect of Magic Bullet Looks takes 150 seconds to pass from red to green.

  I tried to completely uninstall the nvidia drivers and installing the last to no effect. I'm kind of frustrated, I chose this system and CS5.5, thinking that it was going to be a smooth experience and I'm a little disappointed right now. If all goes well, there will be a fix for this. Or maybe I am doing something wrong myself.

  Thank you in advance and sorry to bother you with this.

  See you soon.

  Diego

  It depends on your memory and the degree to which pass you the RA, EN, AE and PS and others. With 24 GB, it is not really important. With 12 GB but switching limited and the use of AVCHD material, it is not terribly important. Material Red4K and no more than 12 GB it can pay to move the pagefile to H.

  Therefore, there is no clear answer. It depends on your workflow, your source, your memory material.

• Receving Invocation does not seem to work

  Do not know if I did it correctly:

  
          application
          
              icon.png
          
          
              bb.action.OPEN
              *
              
          
  
      
  

  Starplayer: / / from the home screen opens the App, but it does not get the slot of shooting:

    bb::system::InvokeManager invokeManager;
  
      QObject::connect(&invokeManager, SIGNAL(invoked(const bb::system::InvokeRequest&)),
          this, SLOT(onInvoke(const bb::system::InvokeRequest&)));
  
      void ApplicationUI::onInvoke(const bb::system::InvokeRequest& request){
      QUrl mInvokationUrl;
      Q_UNUSED (mInvokationUrl);
          mInvokationUrl = request.uri().toString(QUrl::RemoveScheme);
  
      qDebug() <
  He said: ' ApplicationUI:nInvoke (const bb::system:InvokeRequest &) has not been labeled as a member of Qt; Make sure that all parameter types are fully qualified! "don't know what it means.
  Any help would be appreciated
  			 
  Yes, you should be able to access the URL of the application has been invoked with.  Take a look at the example of invoketarget and compare it to your application.