P3015 - can you print header on both duplex and duplex not?

OK, so I read the posts on bugs with the firmware and printing backwards. I am convinced that this is not the problem that we have.

We have a P3015DN. Try 2 we have letterhead.

Staff sometimes want to print duplex on letterhead sometimes single-sided.

I know this sounds simple butI don't think that this is possible.

An example: Document1 has two pages, the word on the first page and on the second secondpage firstpage.

If I load the paper as indicated for letterhead (2 tray settings are A4 and every type) have one side it prints two pages correctly the way straight to the top.

If I change the settings to print both sides and print the document it prints the page one to the back of the paper to header (and backwards) and two page at the front of the book and upside.

Is this correct behavior?

Is there a way to get around this? I tried rotation (which brings them the correct way to the top), but it still prints pages and then two in the front and one at the rear. (although I also change the parameter from the front to the back on the back of a plan)

Probably HP cannot have highlighted a printer allowing printing two-sided all or nothing?

Any help is appreciated, we have 10 of them that will come back in a week if not.

According to the manual of LaserJet P3010 series user's Guide (http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01612470/c01612470.pdf - see page 105) you should be able to set the Alternative letterhead mode in the driver:

Load letterhead or paper pre-printed the same way for each employment, to printing on one or both sides of the page: 

one) Open the Options section of the Document, and then open of the printer features section.

b) in the Alternative headerdrop down menu Mode, select on.

c) in the product, the paper in the same way that you would for printing on both sides.

Tags: HP Printers

Similar Questions

Maybe you are looking for

  • one by one

    I have a One to One membership, I have not bought yet, is this an obsolete program now?

  • 2 sides print with hp 6800 all-in-one

    Recently, I went to print my blog for the bridge support and was amazed that I had not noticed the option to 2 sided print before. (I have this printer at least 6 mos) I was thrilled, as it worked! Problem is the option 2 faces no longer appears. Eve

  • Usability settings problems

    I am visually impaired and need of icons and text in clear, large.  I am running Windows 7.  I have a LCD HDMI monitor, I put it is native/recommended resolution of 1360 x 768 31 ".  I tried a lower resolution, but the text is too vague.  I put the t

  • p6203w M/N - 250 Watt power supply, to be upgraded.

    This model slimline I, p6203w, contains a small 250 Watt PSU.  I want to improve, but I fear that the new power supply may be too much physically. I know that I could just leave it outside the PC, but I prefer to have it mounted properly.  Are there

  • Displacement/rotation comic form

    I just started to work with Illiustrator draw lots with an iPad Pro and Apple pencil.Since Illustrator Draw is a vector app, rather than a painting application, drawing how you select a previously drawn form and move, rotate or even delete it please?