Pages do not meet the works of instructions ok for awhile then starts to wipe the text

Similar Questions

• Use Firefox all the time, but on the page where it tells you what plug-ins are oudated there is a message saying that I do not meet the requirements to run FF.

  I have an iMac. Mac OSX... Version 10.5.8 I had Firefox installed for a long time and use it more often than Safari these last time. However, when I'm on the FF page where it tells you what plug-ins are very good, and which are outdated (with a warning), at the top of the page, there is a message saying that my computer "does not meet the requirements to run Firefox. And yet I have it and use it! Maybe the message actually means that I can't upgrade to the latest version? But also I don't know if I should go ahead and try to download plug-ins up to date. Any input would be greatly appreciated. Thanks in advance.

  You can also
  Try to update to 10.6 and more if your computer supports (costs less than a new computer)

  • https://discussions.Apple.com/thread/4537537?start=0 & tstart = 0

• Error installing Microsoft NET Framework 3.5 Service Pack 1 Setup program has detected that this computer does not meet the requirements to install this software

  I need to install Microsoft NET Framework 3.5 Service Pack 1, as it is necessary to perform a Dell diagnostic Test, but I've been advised that: Setup has detected that this computer does not meet the requirements to install this software. Requirement: Windows install 3.1.

  However, when I look at the download page of Windows Installer 3.1 is not actually as for XP with SP3. I tried anyway and: Setup has determined that the version of Service Pack for this system is newer than the update you are applying. There is no need to install this update. Well actually it is there...

  Is there a way to get around this?

  See below articles for solution

  1 system requirements for the .net framework

  http://msdn.Microsoft.com/library/8z6watww.aspx

  2 download links for .net framework

  http://www.Microsoft.com/net/download

  or

  http://msdn.Microsoft.com/en-us/library/5a4x27ek

  3. top 8 resources for .net framework

  http://www.Microsoft.com/net/itprofessionals

  4 dependencies and Versions of .NET framework

  http://msdn.Microsoft.com/library/bb822049.aspx

  5 frequently asked questions
  http://msdn2.Microsoft.com/en-us/netframework/aa497323.aspx

  6. management of versions, compatibility and run side-by-side in the .NET Framework
  http://msdn2.Microsoft.com/en-us/netframework/aa497340.aspx

  Good luck

• Product number: XW898AV: sp54471 - does not meet the minimum requirements (trying to recover the switchable graphics)

  I accidentally lost my switchable graphic trying to update using drivers directly from AMD.  I have no more restore HP Manager.  I tried to download HP sp54471.exe, but every time I try to install it, it says that I do not meet the minimum requirements.  I tried to use the Help Assistant tool as well, but it also gives the same error.  When you try to use only the tool to search for updates, it does not include anything for the graphics.

  Hello:

  You must use this driver...

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp55092.exe

  You will never be able to update the switchable graphics driver, so after getting things working again with this driver, you will need to leave well enough alone.

• Virtual Storage Manager - startTime does not meet the minimum value of 0 error

  Hello

  Someone at - it a fix for the problem in the region related to programming?

  When you attempt to add or change a schedule, we get the following error.

  Title: Too small
  Text: startTime does not meet the minimum value of 0

  What another user has said there US no customer impact and workaround has been to change the region of the computer you were using. I tried this and it doesn't work.

  This error is now a few years old.

  For anyone having this problem, add a parameter string regional en_US to the URL.

  For example .../vsphere-client/?locale=en_us

  Schedules can now be modified properly.

  Here's hoping for a permanent solution in the next major release.

• "BOLD" does not meet the system requirements? -BES

  This is getting ridiculous.

  Tried to install my Orange BES "BOLD" - and I get this message on the WAP site:

  View

  I'm sorry that your device does not meet the system requirements that are needed to support BlackBerry App World.

  Yes - I'm in the United Kingdom

  No - there is no policy of BES blocking apps

  Feature: "BOLD"

  OS: v4.6.0.162

  Carrier: Orange UK

  Plan: BES

  2 devices on different networks - and AppWorld does not work on either! is this an April fools joke?

  This question seems to have been resolved - try to access the same address now and it will work.

• Program will not meet the entry

  Hello. I am writing an application for blackberry that uses multiple threads. The program works well, but does not meet the entry of events while the audio player and CPU threads is executed. The program continually audio bed from the microphone.

  On the Simulator (8310) and my actual device the program refuses to quit smoking. When I press-c arrow beside large button, or the off button, I can't program to close. If I close the simulator by closing the window, it crashes.

  Does anyone have ideas for why it might be locked if wrong?

  See you soon

  I think I found the problem. It was a bug and I was sleeping the main thread, which means that the listener to input from the user is not a chance to verify the entry.

• installed pes 2013 on laptop when you select game get error message "video card does not meet the required specifications (GPU:VRAM 128 MB)" can anyone help?

  installed pes 2013 on laptop when you select game get error message "video card does not meet the required specifications (GPU:VRAM 128 MB)" can anyone help?

  This means what he says.  You do not have the minimum required VRAM.
  The minimum specs for the game is listed as 128 MB of VRAM, but is supposed to work
  on the graphics card integrated Intel 2000/3000.
  The amount of VIDEO memory dedicated on laptops is apparently determined by the FAB of the laptop.

  Without knowing which laptop, or if it is one that has a dedicated graphics card, I guess that your laptop uses integrated graphics that devotes too little of VRAM (64 MB?),
  If it does not the minimum requirement of 128 MB of VRAM.

• Smart phone BlackBerry Smartphones does not meet the system requirements that are needed to support Blackberry App World

  Hello

  I just all new BB Curve 8900 on Vodafone. Its the first BB I've owned and I seem to have a bit of trouble. When I try to download the App World, I get the following error message:

  "Device does not meet the system requirements that are needed to support Blackberry App World"

  How can this be?

  OK then... interesting for Vodafone to push support far... Well, by I guess.

  So I guess that I change their instructions... rather than to remove an installed version of the AppWorld in the way they suggest, I suggest go to:

  Homescreen > Options > Advanced Options > Applications

  See if BB AppWorld is listed as installed. If so, highlight (but do not click) it and then press the BBKey and select Delete. If she wasn't there, then continue on these steps.

  Then do a batt pull reboot:

  With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.

  Then re - activate your THS:

  Homescreen > Options > Advanced Options > host Routing Table > BBKey > sign up now

  Then re - send all the service books:

  http://www.BlackBerry.com/BTSC/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB02830&SLIC...

  Then do another reboot batt-pop.

  Then, get a new link for AppWorld from here:

  http://NA.BlackBerry.com/eng/services/appworld/download.jsp#tab_tab_download

  And re - download and install it.

  I hope it's going to go right. If not, then it could still be useful a call to Vodafone...

  See you soon!

• ODI-14136 Database did not meet the requirement

  Hello everyone,

  I installed Oracle database 12.1.0.2.0 and Oracle Data Integrator 12cR1 (12.1.3.0.0) on windows server 2012 R2.

  I also created databases of odi repository schema.

  Creating master repository, I got this message when the connection test: ODI-14136 Database did not meet the requirement.

  I read on the forum that it is thanks to the version of the database but in Oracle Fusion Middleware Configurations supported system, fmw 12.1.3.0.0 is supported by oracle database + 12.1.0.1.

  Does anyone have an idea?

  Hello guys,.

  I solved a problem by using the remote control to create master and repository work.

  Thanks for your help

• System (redirect) does not meet the requirements

  I tried to install intel graphics 4000 hd in my system which is inspiron 15 but it shows me the error that the system does not meet the requirements. I don't know how to do it. And that's why another AMD Radeon 8730 M graphics card may not work correctly. So, what can I do?

  It would seem that you have a laptop, then you better make this post in the portable computer Forum here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• HP Support Assistant will not be installed. System does not meet the minimum requirements.

  I installed my system from Vista to Windows 7 Premium. I have a HP Pavilion Elite m9177c PC. After that I have the latest version of the HP Support Assistant download and run it. It stops at half way through and comes up with a message "your system does not meet the minimum requirements. Does anyone know what are the minimum requirements? If this is not the case, is there a version that will run on my system and also with the Windows 7 Premium?

  I am happy that it worked.

  It is an older version.

• Deleting lines that do not meet the IF condition in the report of BEEP

  Hello
  
  We must be able to remove lines of our CRI BEEP that does not meet the conditions IF that causes the report BEEP to have hundreds of blank pages.
  
  I tried the code @INLINES on the foreach and IF statements, without result.
  
  Can someone help us please with it?
  
  Thank you

  Check your Inbox that I sent that you updated model as long as you need.

• David Powers Lesson10 - "does not meet the requirements of an image.

  Hello

  I have a problem to download lesson10 image. It still shows the error message "not satisfying the requirements of an image" even the size of the image, the width and height to meet validation. This is upload_images.php

  My download file size is 160K with 640 pixels wide and 480 pixels high. Help, please. Thank you.

  upload_images.php

  ----------------------

  <? PHP

  $uploader = new Zend_File_Transfer_Adapter_Http();

  $uploader-> setDestination ($destination);

  $uploader-> setOptions (array ('ignoreNoFile' = > TRUE));

  $files = $uploader-> getFileInfo();

  $filenum = 1;

  foreach ($files as $file = > $info) {}

  $file = 'picture {$filenum} ";

  $caption = $_POST ['caption {$filenum}"];

  If (isset($_POST["place_id{$filenum}"])) {}

  $place_id = $_POST ['place_id {$filenum}"];

  } else {}

  $place_id = NULL;

  }

  $filenum ++;

  If ($uploader-> {isUploaded ($file))}

  $filename = $uploader-> getFileName ($file, FALSE);

  $uploader-> addValidator ('Size', FALSE, 500 kB');

  $uploader-> addValidator ('MIME Type', FALSE, 'image');

  $uploader-> addValidator ('ImageSize', FALSE, array ('minheight' = > 50, "minwidth" = > 100 "));

  {If (! $uploader-> {isValid ($file))}

  $errors [$filename] = "$filename does not meet the requirements of an image;

  } else {}

  $no_spaces = str_replace (' ', '_', $filename, $renamed);

  $uploader-> addValidator ('Extension', FALSE, 'gif, png, jpg');

  $recognized = FALSE;

  If ($uploader-> {isValid ($file))}

  $recognized = TRUE;

  } else {}

  $mime = $uploader-> getMimeType ($file);

  $acceptable = array ('jpg' = > ' image/jpeg')

  'png' = > ' image/png ',.

  ('gif' = > ' image/gif');

  $key = array_search ($mime, $acceptable);

  If (! $key) {}

  $errors [$no_spaces] = "$filename is an unrecognized image type";

  } else {}

  $no_spaces = "$no_spaces." $key ';

  $recognized = TRUE;

  $renamed = TRUE;

  }

  }

  If {($recognized)

  get the names of existing files

  $existing = rewinddir(3) ($destination);

  check if the name of the downloaded file is in the table

  If (in_array ($no_spaces, $existing)) {}

  get the position of the last period

  Use it to get the base name and extension

  $dot = strrpos ($no_spaces, '.');

  $base = substr ($no_spaces, 0, $dot);

  $extension = substr ($no_spaces, $dot);

  initialize a counter

  $i = 1;

  use a loop to add the counter after database name

  check if the new name exists in the table

  {}

  $no_spaces = $base. '_' . $i++ . $extension;

  } While (in_array ($no_spaces, $existing));

  $renamed set to true

  $renamed = TRUE;

  }

  $uploader-> clearValidators();

  $uploader-> addFilter ('Rename', array ('target' = > $no_spaces, $info ['tmp_name']));

  $success = $uploader-> receive ($file);

  If (! $success) {}

  $errors [$no_spaces] = implode('.) (', $uploader-> getMessages());

  } else {}

  $uploaded = '$filename downloaded successfully ';

  If {($renamed)

  $uploaded. = "and renamed $no_spaces.

  }

  $images [] = array ('name' = > $no_spaces,)

  'caption' = > $caption,

  ('place_id' = > $place_id);

  $messages [] = $uploaded;

  }

  }

  }

  }

  }

  I finally solved it. For your information, I use php version 5.4.3 and MAMP 2.2. Here are the changes:

  (1) open the php.ini file

  Search for "extension = php_fileinfo.dll" and delete.

  (2) download the package files GNU for windows http://gnuwin32.sourceforge.net/downlinks/file-bin-zip.php.

  Extract the zip file.

  (3) copy 2 of the file in the extracted, folder/share/file/Magic and... /share/file/Magic.MGC and paste in the folder extra/php/magic

  folder. (Create the magic folder in the new folder).

  (4) stop MAMP all services and services to start.

  It will work for you!

• My Firefox has just automatically updated itself to the version 42. The extention under modules page does not display the extensions I have installed.

  My Firefox has just automatically updated itself to the version 42. The extention under modules page does not display the extensions I have installed. The plug in page shows the plug ins I installed. How can I fix it? This happened on my 64 bit Windows 7 partition. I installed the extension "classic add-on" to see if she could solve the problem. There is unfortunately no. I have a screenshot. I'm not sure if I have permission to upload it to the media gallery. I also use Linux, but I did not upgrade that are still there.

  It is possible that there is a problem with the files that store the registry extensions.

  Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

  • https://support.Mozilla.org/KB/profiles

  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
  • https://support.Mozilla.org/KB/unable+to+install+add-ons