Pages: How do I create a formatted list which maintains spacing, lettering, numbering, "previous", etc.. ?

Similar Questions

• How do you create a video thumbnail which becomes bigger if clicked?

  I have video thumbnails added on my site for youtube and facebook. Thumbnails are small if clicked. How do you create a video thumbnail which becomes bigger if clicked? Thank you, Kelsi

  Try to use a Widget for Composition.

  Add your thumbnail image in the relaxation area.

  Add your Youtube video link to the part of Lightbox.

  You may need to test your browser page, then resize the jQuery framework to your liking.

  If you want your video to show on the top of your page, try the blank publication Widget.

  If you want to fade the page behind your YouTube video box then try the Widget of Composition of LightBox.

  See how a Youtube video here

• How can I create a mailing list "unknown recipient"?

  I created a mailing list that contains multiple e-mail addresses. I was worried when I posted an email to a list of all email addresses have been displayed, which means that everybody could see that I was sending to.
  I want to have a mailing list that does not show that either a list of undisclosed recipients.

  Always try to find how to add a bcc: line. Any ideas welcome. I went to Alt + T Copies and files and only see a field to enter in an entry static bcc which is intended to be sent each time. This isn't my situation. I want to be able to CCI of different people in various e-mails.

• How can I create a record list or global signal system

  Forgive me, but I've been away from LabVIEW for awhile. I worked in the field of LabWindows (99% of our work) for the past five years with some sprinkled in LabVIEW. I was responsible for designing a replacement for an existing test unit at another plant in our society with a main requirement being that LabVIEW is the development environment.

  We have two architectures 'C' standard very strong that we try to use them as a reference point on the majority of our work. I would like to try to implement one of these architectures in LabVIEW but I find this part, and really a fundamental part of this architecture is not translated very well. The centerpieces of this architecture are looking for overall signal structures and a record of overall system. The research of signal structure is a complete list of signals in the system test with information scalar and offset. Registering system stores the current raw value for the each of these signals. See the examples below:

  typedef struct SignalType

  {

  int globalIndex;

  Double voltsPerEngUnit;

  Double voltageOffset;

  Char [SIGNAL_NAME_LENGTH] signalName;

  } SignalType;

  struct SignalLookup

  {

  SignalType sigTable [MAX_SIGNALS];

  SignalType * hardwareOutSpare100;

  SignalType * hardwareOutSpare99;

  SignalType * hardwareOutSpare98;

  ...

  SignalType * hardwareInSpare100;

  SignalType * hardwareInSpare99;

  SignalType * hardwareInSpare98;

  ...

  SignalType * time;

  SignalType * dutyTime;

  SignalType * frameTime.

  SignalType * isrCounter;

  SignalType * softwareOutSpare96;

  ...

  SignalType * graphPlot1;

  SignalType * graphPlot2;

  SignalType * graphPlot3;

  SignalType * graphGo;

  SignalType * graphDomainMin;

  SignalType * graphDomainMax;

  SignalType * graphRangeMin;

  SignalType * graphRangeMax;

  SignalType * softwareInSpare91;

  ...

  } signalLookup;

  Initialization functions:

  void SignalTypeInit (SignalType * s, global int, char * name, scalar double, double offset)

  {

  s-> globalIndex = global;

  s-> scalar = voltsPerEngUnit;

  s-> voltageOffset = shift;

  strcpy (s-> signalName, name);

  }

  Sub SignalLookupInit()

  {

  Release of material

  signalLookup.hardwareOutSpare100 = & signalLookup.sigTable [0];

  SignalTypeInit (signalLookup.hardwareOutSpare100, 0, "hardwareOutSpare100", 1.0000, 0.0000);

  signalLookup.hardwareOutSpare99 = & signalLookup.sigTable [1];

  SignalTypeInit (signalLookup.hardwareOutSpare99, 1, "hardwareOutSpare99", 1.0000, 0.0000);

  signalLookup.hardwareOutSpare98 = & signalLookup.sigTable [2];

  SignalTypeInit (signalLookup.hardwareOutSpare98, 2, "hardwareOutSpare98", 1.0000, 0.0000);

  ...

  }

  typedef struct SystemRecord

  {

  Double sigTable [MAX_SIGNALS];

  } SystemRecord;

  How can I translate these structures to LabVIEW when LabVIEW with global structures and tables in large n - n in LabVIEW? I am open to any criticism and help I can get.

  Regards-

  John OC

  I'm not C code too closely, but it is seems to me that you basically have a bunch of definitions of named (structs) signal that you want to get the data by name.

  Personally, I would add that all additional necessary data in there (like hardware address and the actual current value) and use a class or library to encapsulate all this in an easy to use API.

  You can create the base functionality by the presence of a data value references lookup table (DVRs, which are a bit (just a bit!) similar to pointers, so that they point to specific data) that will each point to a single cluster (or object). Once you get the DVR to the cluster (or object), you use the structure in place to get the data inside the RECORDER and the specific operation you want (for example, set up the initial configuration or reading calibrate the current value of the signal) on these data.

  For research, I would recommend a simple VI with a variant in a shift register. The shift register allows to ensure that the data between tracks of VI and use you the primitives of attribute ranging from keep the EVN - if an attribute with the current name does not exist in the variant, you create a new and write it in the Variant. Each attribute includes a digital video recorder, which is what you are exporting.

  Thus, for every VI in your API (Init, current value of reading, etc.), you give the name as input and start calling the VI search to get the DVR. Then, you use the DVR to operate on this specific signal.

  If all this seems too complicated, you can try to go with something like this - http://zone.ni.com/devzone/cda/epd/p/id/5326

• How can I create different formats associated with DPS 2015?

  I drove to the top of the iPhone version, and now I need to resize to the tablet. My question is, how do I do this in the DPS Portal? I don't see in the documents given to adobe.

  A few questions:

  Your project 1 top-level collection or collections of higher level 2? Select "Collections" in the left rail and then search for either a collection called "default" or two collections called "phone by default" and "default tablet." If you have just a collection of 'default', this means that all of your content will appear on phones and tablets. If you have "phone by default" and 'default tablet', you must specify the contents of the collection of the tablet. This is determined by a project setting that you specify when creating the project. For the moment, you cannot change this setting.

  You want to include a different content for tablets and phones, or you want to use the same content in two? As a general rule, the HTML items work well on phones and tablets, but for fixed layout (at base of InDesign) items, you may consider creating separate articles for phones and tablets.

  Next week release includes a new system that we call "renditions available." When you define a layout template, you will be able to create different layouts page (or "renditions") for tablets, phones and the web. For any collection that appears in phones and tablets, you will be able to design layouts to browse different for the target device.

• How can I create an address list in Firefox so I can send the same e-mail to 20 people?

  I'm in a small organization and need to email common to members of 20 or more. Other that to copy and paste from an email previous I have not found a way to do it. I just need a list, I can choose who will fill in the field.
  Thank you

  Firefox is NOT an e-mail provider, please consult your email provider to help do that.

• How do you create content to list of contacts of scrolling in Flash style.

  Looking for a help/code for the creation of scrolling content to flash iOS that resembles the functionality of the list of contacts, ipod, etc. etc. etc..

  Drag and drop now but its not nearly as nice as the typical effect on the phone.

  http://code.Google.com/p/AS3-iPhone-scroll/

• Shades of gradient. How do I create one of that which is already in a document?

  Downloaded an image from iStockPhoto. Open in Illustrator, and removed the black background because I want to put my own values for the black background in InDesign.

  Noticed that there are several "bubbles" of black background behind the main image containing radial gradients.

  These "bubbles" melted to a dark blue in the Center to black on the edge. Once again, I want to be able to define this 'black' to the value of the black I want to use for the background of the card. When I click on one of the bubbles, I see in my palette to gradient, that it is a radial gradient and the value to the left of the cursor is 100, 75, 0, 50, that I can see in the color palette. But I can not change anything here. On the right of the cursor in the Gradient in the palette is the 'black', who is 80, 50, 0, 100.

  So, how to change the value of that black? If I choose "new nuance" in the Swatches palette, it creates just a new shade called "new shade of gradient 1" it shows color swatch for the type of color below which is gray as well as any what.»

  So, even once, how can I do to change the black on this slope?

  IDCS 5.5

  I got it. Geez. It's stupid how it works.

  The way to do is to click on the drop-down list at the top right of the color palette and choose a color space. For some reason, there is initially NO color space. So I choose CMYK, and then I get my CMYK sliders to adjust the values.

  / can I mark my own correct answer? Laughing out loud. I had to understand it just by clicking around, but at least I understood it.

• How can I create a background gradient which does not affect the readability of the words in the foreground?

  

  Note that the words seem to disappear as the blue becomes more important?

  How can I fix it?

  In addition, since I work more than 30 plans, is there a general framework that needs to be changed?

  Furthermore, this gradient was created using the gradient tool, and is therefore not part of the background.

  Under file-> Document Setup, I found that you can create a background Uni but see no options for a gradient fill.

  I would appreciate help.

  I'm like your gradient is above the text.

  Select your gradient and the hit Shift + Ctrl + [ ]

  This should send your gradient to the back behind the text

• How can I create a Second Site, which is a subfolder in an existing Site?

  Previous webmaster leaves abruptly.  I inherited the mess.

  There are a number of 'sites' that are not real sites, but the subfolders located on the main site.

  I have the main site with success defined in Dreamweaver CS6.  Everything works as expected.  I am trying to create a new site that is a subfolder of the main site.  Dreamweaver warns me against that, for reasons that are not clear, but I can think of a lot of potential problems.

  

  Then, next thing I try is to create a local site that is NOT a subfolder, but a peer folder in the main local site.  I set the remote instance as subfolder of the remote site. When I do that, the new site works very well.  Yay.  But the former site is now broken.  When I try to watch its remote instance, I get this error message:

  
  

  

  
  

  If I delete the newly created site and restart Dreamweaver all is forgiven.  I tried this several times with the same results.

  
  

  Any thoughts?
  

  
  

  
  

  > Once I have the drive mapped to the directory with all the files in Web site, I could define my subsites in DW

  OK, that makes sense.

  > This works, as long as I spend on the DW website that corresponds to the subsite (site1, site2, training3, etc...).

  Good, not perfect, but workable. Unless some reason why they managed it as separate sites, it must be simplified at some point. It would be easy to do fairy but you would need to move the school to the root level templates and add a link to the child pages. Whenever you mess with the templates there is potential for problems to wait until someone else takes the role is probably prudent.

• How can I create a great picture with just a few numbers in there?

  Treat all

  I would appreciate if you can help me with this problem.

  I would like to highlight certain points on a diagram that its horizontal size is 1000. so I create another table with the same size of the main diagram that contains my points you want then I have to put the other free sites like ZERO! that is not suitable at all.

  so I think in an array of size 1000, but with just a few figures in there, but I think that's not possible.

  Please tell me if there is any other soloution.

  Thank you very much

  I will mark the best answers for sure

  Ali

  Hello Ali,.

  If I understand, you want to score orhighlight some certain points in a graphic waveform. A simple way to do this is to use annotations (for example, without the arrows, a few points), there are the examples come with LV another way is to use an XY Chart. Here, you can put some points to certain positions-X.

  Maybe it helps,

  Welcome, dave

• How can I create images with lightbox which are 100% width

  With Dreamweaver, I use Lightbox JS 2.0 to take pictures on my Web site. But whatever I do photos are always too big. I create of course with a width of 100%, but on my screen, they are about 200% and so they are a little blurry.  I'm doing something wrong, or is there a way to prevent this?

  Well, your layout of the web site is not responding.  Its width fixed in pixels.

  And Lightbox container seems to be wide 1020px.  So it isn't an ideal layout for small users of the device that needs to scroll horizontally.

  If you want to reply, watch this DEMO of Bootstrap.

  Bootstrap Modal + Carousel Gallery - http://alt-web.com/

• How to recover my original acrobat reader which was preinstalled on a previous computer?

  I'm trying to reload the reader acrobat x on another computer and it is looking for the original SN of my product. The original software was part of the software pre-installation where I enabled on my old computer that appears only in SafeMode right now.  Anyone know how to get the serial number?

  Thank you.

  Hi Debra,

  Acrobat Reader is a free program that doesn't require any serial number. However, Acroabt is a paid software. Make sure that you install the version you want.

  You can download Acrobat Reader by using the following link: http://get.adobe.com/reader/enterprise/

  Kind regards
  Rahul Tyagi

• How to create a definitive list of objects with NOLOGGING

  Hi all
  
  How could I create a definitive list of the objects that could be affected by NOLOGGING. I checked dba_tables, dba_indexes, dba_lobs and dba_tablespaces. I presume that these are the only objects that have a setting of LOGGING/NOLOGGING. Are there others that I missed? Someone at - it script trickery?
  
  Mark

  I suggest to include dba_tab_partitions and dba_ind_partitions if Oracle partitioning is used in the comic book. You can set the logging/nologging on partition level.
  In addition, you can ignore the column of LOGGING in DBA_TABLESPACE - it does not represent the values of the RECORD for all objects in the repository.

  Published by: Lordane Iotzov on May 19, 2011 13:24

• list with letters/numbers circled and cut into square

  I want to make a numbered list and an alpha list in InDesign CS5, which looks like this:

  

  The list would include A, B, C, etc. and 1, 2, 3, etc.

  I applied the numbered list of paragraphs property. I am able to create a style of character for the letters/numbers in the list, which includes the color of letters and numbers, but InDesign does not apply the underline property to the numbers. I need the underline property to add the colorful square and the circle.

  I can do it with a non-numbered list, type the letters/numbers by hand, but it's a hassle and tedious when I need to reorder the items in the lists.

  Can anyone help?

  There was a similar thread yesterday. It is not entirely clear if this is a bug (I think it is) or a feature emphasizes being a character set and automatic numbers are not recognized as characters in the same way that typed text, but the fact remains that underline and strikethrough do not work on numbers and bullets in a list.

  You have two options. One is to use a paragraph NET and set a huge right indent, but this does not work too well for multiple-digit numbers, or I don't think it works very well with the letters in a proportional font.

  A second option would be to find a font with the circle or the square into the characters and use it as part of a style of character applied to the numbers. I think it's the best solution, but it may not give you the colors you want if you need solid numbers on a colored background.

  A third option would be to use an anchored object placed behind the numbers. It has the most flexibility, I think.