Panorama Viewer?

Similar Questions

• Panoramic view does not

  I have a three monitor Setup and the themes of the panoramic view not cover monitors. My background is a different image of the same theme on each monitor. I selected "extend your desktop to this display" but it does not. On the issues non-panoramique, I also have a different image, where in Windows 7, I used to get the same on all three monitors.

  I made an installation upgrade with the version upgrade of Windows 8. I have two monitors plugged into a discrete graphics (AMD 7750) adapter and the third screen plugged into the integrated Intel graphics card. My system is an Asus P8Z60 - V LX with a Core i5 2500K CPU and 16 GB of RAM.

  Any suggestions?

  Hi guy,

  I've improved since my third monitor to another with the same resolution, as the other two and 8 panoramic windows view works wonderfully through the three automatically.

  However, I will use your solution on my two-monitor Setup at my desk since I have two monitors of different resolutions.

  Kind regards

  Robert

• Error: "could not steal the images and find another place and cover these" while trying to create the panoramic view

  Original title: Image Composite Editor

  Why isn't my images being created panaroma style? I downloaded ms direct Photothèque and then my pictures, then clicked on create composites, it is downloaded. then clicked on new panaroma and he gave me a message, it might not steal images and find another place and cover them.

  Hi NormaValdez,
   
  Here is an article that could be useful for:
  Photo Gallery: creating a panoramic point
  
  If this does not help, post your query in Windows Live Photo Gallery Forums for assistance on this issue.

• Panoramic view of the big picture view

  I have a document that is 150 by 240 and I would like to move in an image that is, well... huge. I think there must be a way to do this. I imported the image of my library and then dragged into the document. Now I don't see the limits of the document as it is covered by the image.
  
  How can I move the image behind the document to create a pan and zoom effect?

  The best way to see the edges of your film is to create a new layer above the image and draw a rectangle that covers the edges of your window (no filling inside - right on the border). If you draw just beyond the edges of your film, it will not appear when you publish your swf, or you can simply delete the layer before publishing it (once the animation is complete) if it is easier.

  As for fake zoom, just scale the image longer or shorter according to the needs and the interpolation of keyframes. Caution - a giant image will probably have to scroll a little nervous during playback and you get fuzzy by nature - flash is optimal when you vector animations. As an alternative, you can create the animation in a video progam (Prime Minister Adobe, Adobe after Effects, etc.) and linking within Flash (.flv format) video...

  Hope that helps...

• Why was the swype gesture to the right to view open deleted tabs?

  In previous versions of Firefox for Android, you could swype the screen with 2 fingers to the right, and he would show a list of open tabs. This design was smooth and very easy access.
  Why this was removed?
  Is all swyping equivalent to the new version of the tabs on the top?
  Thank you

  There were many complainants that Firefox has no legs. UX testing, with the entire population, the UI Slides tabs was generally regarded as impossible.

  In addition he caused problems with pages that use the touch events. For example, panoramic view of Google Maps.

• When I try and open my dock on my mac lightroom it is sitting there with just panoramic image and does not open. How to open?

  How can I get lightroom open when it's right there with the panoramic view and color wheel?

  Hi teresas,.

  Please try and reset back to the default Lightroom preferences.

  

  Let us know the results.

  Kind regards

  Mohit

• Panorama

  Hello

  Is it possible to create a 360 panoramic view in PSE 9.

  The help files have this info:

  http://help.Adobe.com/en_US/photoshopelements/using/WS27101fef35e777f9-2794c94411fdcce7142-7ffe.html

  The answer is 'yes '.

  Ken

• Exclude selection in spectral view

  I often eliminate any screams or simple return audio in videos that I take.  In AA3, that this has been made easier for allowing me to find the frequency (or range of freq) noise incriminated in the spectrum. freq display, select around her with my cursor, click on the 'Selection to exclude' checkbox and play audio to confirm that deleting this freq (or beach) would indeed be difficulty my audio or would remove the squeal but mess something else up on the clip (telling me to re - select "or learn to live with the sound).

  I got the CS5.5 update partially due to the 'improved' AA, and yet I see that I seem to be MISSING more ability edition I have won.  Specifically, "exclude selection" isn't there in the spectral display more!  {Not to mention that the point of Spectral and spectral Phase panoramic view is gone now too.}

  Have I missed a setting that can get this feature back, or will I just keep using AA3, because it does what I need the program for more than AA5.5?

  Thanks in advance!

  Exclude selection in spectral frequency view is not available in CS 5.5, but is prioritized high enough in the order of service book.

• All of a sudden my tab groups do not work with 16.0.1. That's happened?

  Before installing the 16.0.1 updated, I had a specific tab group open, among several that I maintain for different projects. (I could pass freely between tab groups in 15 FF.) After installation, the tab group button does not open the Panorama view when you click the menu drop down beside him command moves the view to Panorama or the keyboard shortcut works. I restarted FF twice, that does nothing to solve the problem.

  Thanks for your replies!

  @bobsmithofd, I use FF16.0.1 on Mac OS 10.8.2.
  @Cairngorm, not sure, but I think that my view may have worked at first, when I opened at the beginning of the new version, but when I needed it, I couldn't not to him. Later, the Group of visible tabs changed without my having knowingly do anything to get him to change.

  I ended up creating a new browser window, and then experimentally all my tabs slide manually into the new window of the tab bar tab bar is visible to the old window. I then clicked the view tab button in the new window, and he showed panorama. In the old window was another group of tabs in the tab bar, then I dragged those above, for example, to create a new group in the new window, that I named identically. I repeated for a few hours until the disappearance of the old window. The new works very well.

• Question of layout using unmanaged nodes

  I have a question of quite simple layout, but I can't understand any simple way to solve it. I need a container object that contains an label that should be centered in the parent container. I then need an another label which should be placed at the top left of the parent container. What I tried to do was to create a serving VBox of parent container with -fx-alignment: Center. When I add the first label, it looks great. Then I try to add my 2nd label, and I put his property managed to false in the hope that it would not participate in the VBoxto layout its children. But I do not see this second label.

  Using panoramic view, I can see that the 2nd Label is on the display list, and is size, even though I see that his layoutBounds is empty.

  Any ideas on how to achieve this type of layout?

  I think I've answered my own question to tweak it and experimentation. As a beginner, I have not yet mastered all the container classes. For this example, it seems that the use of AnchorPane is the way to go. Here's the code that does what I want:

  Component AnchorPane = new AnchorPane();

  lblValue = new Sun;

  lblValue.getStyleClass () .add ("boardCellValue");

  lblOp = new Sun;

  lblOp.getStyleClass () .add ("boardCellOp");

  pane.getChildren () .addAll (lblValue, lblOp);

  AnchorPane.setLeftAnchor (lblValue, 0d);

  AnchorPane.setRightAnchor (lblValue, 0d);

  AnchorPane.setTopAnchor (lblValue, 0d);

  AnchorPane.setBottomAnchor (lblValue, 0d);

  AnchorPane.setTopAnchor (lblOp, 5 d);

  AnchorPane.setLeftAnchor (lblOp, 5 d);

  where lblValue is the label I want centered in the container component, and lblOp is the one I want at the top left.

  The interesting thing about the boardCellValue style, it's that I need

  -fx-alignment: center;

  since now the lblValue has width that spans the entire width of the container component.

  If it works for me and is quite simple. There are easier ways?

• Stop the screen turn on mobile devices

  Hello guys,.

  I was wondering if you could help me. I am designing an app for tablets and I wish the app was only visible in the panoramic view.

  Is it possible to prevent the screen turn on mobile devices and perhaps view-panorama?

  Thank you!

  Bert

  I don't work on mobile applications or anything, but I guess you can try:

  in scene/orientationchange

  if(Window.orientation == 0) / / Portrait

  {

  Window.orientation == 1 / / landscape

  }

  and you can see #4 here:

  http://StackOverflow.com/questions/3501510/blocking-device-rotation-on-mobile-Web-pages

  or with css here:

  @media all and (orientation: landscape) { ... }

  Media - CSS queries using | DND

• Settings of the project have been to 1080 for my 4 k images, thrown extra pixels?

  Hi people...

  I understand that EP 13 is supposed to automatically set the project settings identical to an imported video file.  In my case, it didn't happen... I imported video 4 k/15 fps... and after that I'm done cutting and editing and now want to pan and zoom in the 4 k images, I see that the parameters of the project were actually in 1080.

  Issues related to the:

  (1) why EP did not indicate the project settings for 4 k?  And out of curiosity, wHat makes this EP when a person imports video of various sizes and rates?

  (2) since it didn't, did all the extra pixels above 1920 x 1080 to jump?  I ask because I want to pan and zoom in my 4 k and close up images at least 1080 p for output.  Is it still possible in my current project?  If not, is it possible to take my 4 edited clips of k and paste them into a new project so all the 4 k pizels are intact?  Or do I have to start all over again?

  (3) what does EP with sequences of 15 images/s exported to 30 frames per second?  Does it simply double every image?  It is not interpolate between the ribs, t - it?

  Thank you...

  --

  Bill

  Bill

  Thanks for the follow-up. I'm glad to hear that everything is going well.

  On the application of the effect of panning and zoom in the video with the first elements Pan and Zoom tool, please visit my how on that.

  http://atr935.blogspot.com/2014/08/pe12121-pan-and-zoom-tool-and-video-file.html

  You can make only one clip at a time in the workspace to pan and Zoom. Even if you video clips selected together (Clip Menu/Group) in the editing area, Menu/Pan and Zoom tools still sees you trying to use more than one video of group both in his work space and refuses to work.

  You wrote

  I have a 'scene' which consists of 3 clips.  I want to pan/zoom the whole scene... so a pan/zoom can continue smoothly one clip to another.

  The only way I see that done is to export the 3 clips in a file saved on disk as XAVC-S 3840 x 2160 @ 15 frames per second and then progressive for the import and export again in the program you are working on. Then Menu/Pan and Zoom tools. If you need to export these clips selectively in the working draft, then two criteria

  a. gray tabs on the workspace toolbar must span the area to export

  and

  b. export settings, it must be a check mark next to the option "Share work area Bar only.

  Depending on how your Pan and Zoom Tool work progresses, we could also consider making the pan and zoom effects, instead of using keyframing of scale (for zoom) and the Position (panoramic view).

  RTA

• How can I move the CRA over time default text?

  I have placed "Default Text" on a separate video track. In the video, a hand is oriented along an arc for 1.5 seconds.  I want the text to follow the CRA that the hand moves.

  I stumbled on how to do this all by pointing and dragging various things in the framework, then I screwed up the edit and CTRL-Z got myself back to a better point AND I LOST THE ABILITY to do so.

  While it worked, I would see my text in its framework, and the center of the image has a cross.  By positioning the scrubber at the beginning and ending points, there was a line drawn from the cross to the text.  The starting point was a line showing the starting position, the point of arrival had it showing the end position.

  Now, when I try to move the text, I get one of two things (none of them work for my plan):

  (1) I have the window "Settings" open and the pointer tool is used to fix the position of the text in my "Default Text" setting.

  (2) I'm moving the entire frame in the preview window and the cross moves with it.

  I stumble on something and I don't know how I got there.

  Thanks for any help you can give.

  Me: 64-bit Windows 8.1, Adobe Premiere Elements 13

  billsbayou

  Great news. Great job.

  Timeline clip selection, Panel applied effects tab/Applied effects Palette/movement extended to get across (to zoom) and properties of Position (panoramic view).

  That's where I was pointing you in my previous post when I wrote

  But if everything you want to do is to move text along a path in Premiere Elements, which can be done Motion Keyframing scale (to zoom) or

  Position (panoramic view) / probably better using this framing key to the Position property. Have you tried yet?

  There is always another way... creating keyframes for Position at the level of the "elastic" timeline, orange line that scrolls horizontally on a video editing or audio clip. More info on another time if you are interested.

  But, at present, a lot of progress.

  RTA

• Need help scaling, cropping and zooming

  Hey people.

  I play a lot of Battlefield 3 on my PC, and from time to time I would like to record some of the game to share with others.  I have the ability to save the game (I'm still trying to figure out how to save also the sound!), but there is a challenge: I play the game extends throughout the 3-panel LCD 1920 x 1200.  Essentially, the final resolution of the game is 5760 x 1200, which gives me relatively beautiful panoramic views of what happens.

  Problem: I need to crop, up to 1920 x 1200 and then intermediate screen crop/zoom it again up to 1920 x 1080 for upload to YouTube.  But I'm not sure how to do this.  If the recording software has been smart enough, he'd let me choose what part of the final screen to save, but this would require a lot of extra processing power so that in the game.  So he just blindly saves every pixel he sees on the disk.

  While experimenting last night, I tried two things:

  • Import large AVI file, create a sequence of him and then add a harvest.  With said culture, I cut the left of 33.3% and the right of the same amount.  As I expected, I was left with a perfect image in the center of the massive image, but with a large box black on each side of it.  I didn't know what to do with it from there.
  • Create a new sequence of resolution 1920 x 1080 and drop the AVI intact inside.  It is closer to what I want, but I have a few questions zoom/crop.  Specifically, the black bars on either side of the image indicate that I am always turned off.

  Here is the second attempt:

  There is a step or two more that I do here, and I'm not sure what it is.  Any suggestions?

  Thank you!

  JAS

  Hi Jas,

  I'd go just for the 1920x1080p preset with a cadence that is appropriate for your clip. If 'Ladder to the chassis' is DISABLED in Prefs, then the video must be centered in the view of the program, with no necessary additional cropping. For example, if I put a video clip HD in an SD sequence, I don't see the whole image HD - I'll see just the center of the largest element, which represents only 720 x 480 pixels from the center of the larger picture of 1920 x 1080.

  So if you place your clip of 5760 x 1200 into a sequence of 1920 x 1080, you should see just the central part, with a bit of top and bottom are cropped since it is larger than the frame. You can use Motion > scale who bring down a little if nothing is cut (with the exception of the sides, of course).

  In addition to preferences setting, which affects the elements at the time of importation, you can with the right button of your clip on the timeline and select or deselect "Scale to the chassis" it according to the sequence by sequence also.

  Hope this works for you

  Thank you

  Jeff Pulera

  Safe Harbor computers

• button inside pan & zoom image?

  My client requires a button (still) static inside image when using a panoramic viewer and zoom. A single tap to return to the page. Is this possible?

  No, not for a pan & zoom. You can add a button to a moving image that pans in any direction, but there is no zoom.