parent of the window

Similar Questions

• assistance to a parent of the window

  Hello!!
  Can you tell me if there is a property like 'MdiParent' in Visual Basic?
  I need a way to make a parent windows where other components...
  
  as in the FLEX DEVELOPMENT, when there is a main window (with file, editing, source, menu etc.) and other small windows as FLEX NAVIGATOR, DEBUG, etc., who lives only within a main...
  
  Thank you and goodbye! ^__^

  http://livedocs.Adobe.com/Flex/3/langref/MX/containers/package-detail.html

• How can I accept terms of use Live when you try to use the Windows 7 parental control features?

  * I have already connected to fss.live.com and https://familysafety.microsoft.com. This solution does not remedy the issue.* *.

  When you try to use the Windows 7 parental control features, it first asks you to connect to Live.  When I do, I get the 8004B3E9 error Code and it asks me to "connect to account.live.com and accept the terms of use.  However, in doing so, there are no terms of use for me to accept.  I also go to fss.live.come and familysaftely.microsoft.com and no option for the conditions of use is available to accept.  In addition, I tried different browsers.

  I can connect on Live.com and view my account easily, but without conditions of use prompt appears for me to accept, so my attempts to use the parental controls are stuck in this cycle, where it won't let me past without accepting conditions that do not seem to exist.

  How can I make sure I am set up as the account 'Parent '.

  Help, please

  3 hours later I'm finally able to access Family Safety. Thank you!

  The correct link to solve the "Terms of use" requirement is:http://g.live.com/0fsenus4/nexusmigrate

• How can I accept the terms of use, to use Parental controls in Windows 7 Professional 64-bit edition?

  After you install the Windows Live Essentials on Windows 7 Professional 64-bit operating system, I tried to access the Parental control feature.  I was unable to access this feature and said to connect with my Windows Live ID to accept the terms of use.  Once connected, there is no option to accept the terms of use, on the terms of use page.

  Found!

  http://FSS.live.com/

• Cannot make changes to the parents control settings (Windows 7)

  I've seen several comments regarding this same problem, but so far no solution.

  I am the administrator, but I get an error when I try to access the parent on standard accounts control settings.  Now, what's even weirder, is that I am able to access ONE of the standard accounts, and there is nothing different between this account and others.

  I have tried all the solutions already posted:

  -running 'services.msc' and the implementation of parent controls (which is said by the way, says "this service is a stub for of Windows Parental control feature that existed in Vista", which is strange, it's as if there's no 'Parental control' in Windows 7?);

  -create a new administrator account via the control panel (in the case where my administrator account is corrupt), by restarting and trying to put Parental controls

  -create a new administrator account using the command prompt "net user administrator / Active: Yes";

  -in the course of running "sfc/scannow".

  See http://answers.microsoft.com/en-us/windows/forum/windows_7-security/error-unable-to-make-changes-to-parental-control/a17654d8-ff11-4fd2-8ae4-d96170715373; http://answers.microsoft.com/en-us/windows/forum/windows_7-security/windows-7-i-cant-change-parental-controlwhen-i/25390eea-00dd-411b-bfd0-dec9ed459106; http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/parental-controls-error-unable-to-make-changes-to/70d3c356-eb55-4e93-98a0-b5f96ac44eea; http://answers.microsoft.com/en-us/windows/forum/windows_7-security/i-am-trying-to-set-up-parental-controls-and-when-i/f232d8ac-4f6d-e011-8dfc-68b599b31bf5; http://answers.microsoft.com/en-us/windows/forum/windows_7-security/windows-7-i-cant-change-parental-controlwhen-i/25390eea-00dd-411b-bfd0-dec9ed459106; http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/unable-to-make-changes-to-parental-contol-settings/d2a95230-f657-43CD-8294-03fc7ccb72fd

  (By the way, I leave here the 'answer' who said that this question should be asked on the support forum for Windows Live, if you search on this forum, you will find that the 'response' they provide is to ask the question on the Windows support forum.  ;)

  ANY OTHER IDEAS?

  Did you you run regedit as an administrator? It is a common problem in trying just new values. This is done by right-clicking on the program and selecting "Run as Administrator". This allows you to write new values.

  If you would like more information on this subject by me, read the last post on page 3 here:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/parental-controls-error-unable-to-make-changes-to/70d3c356-EB55-4E93-98A0-b5f96ac44eea?page=3
  If you have recently encountered this problem, I would recommend a system restore, and I explain the reasons in the tread above.
  I hope this helps!

• Pass parent area Page name/ID in the WINDOW POP UP

  Hello Experts,
  
  I'm having a parent with a pop up window window.
  
  I want to send the region or Page Id page name or the name of the Parent of button in the window pop.
  
  Because, in the window of my mother, there is a button for each graph.
  
  About clickiing button, a window will appear.
  
  And based on the selected chart, database query would be different.
  
  So I need name of area or page Page Id or the name of the Parent of the button.
  
  Help, please. Its very urgent.
  
  Thank you and best regards,
  Apex. User

  Hello

  simply pass the parameters to your window popup, like calling a page apex and in defining the elements of the page.

  for example, html_PopUp('f?p=100:10:123123123:::P10_REGION_NAME:MYREGION');

  brgds,
  Peter

  Blog: http://www.oracle-and-apex.com

• Change the appearance of the windows of the inactive VI

  Hello!

  I'm working on a software that called screw under different and they all open as new windows in front of the main one. The problem is that these windows are usually smaller than the original VI and the amount of orders that you see on the screen is sometimes a bit boring. You would see the VI parent on the region covering the new window. I want to do is to have the parent VI change its brightness or perhaps have a "fog effect" on it so that attracts your attention is the currently active VI. I apologise for the confused explanation, but I don't know how to make me "understandable." I found an article that explains how to change the background color of the VI, however, I have an image as the background of the application, so the color change will have no effect. What I want is something similar to what happens when Windows Vista asks you administrator rights to perform an action, if all remaining screen gets darker and brings attention to the dialog box.

  Thanks in advance for the help!

  Kind regards

  Giovanni

  Hello!

  First of all, thanks a lot for your quick help. Unfortunately, I am running LabVIEW 7, so I couldn't find the integrated function of transparency. I checked the tst library and used its transparency Subvi on the inactive window whenever a new window opens.

  I made a few changes to add comments of my research on MSDN about the functions used, so in case anyone feels helpul, here the VI.

  I appreciate the contribution of all.

  Giovanni Pace

• Management of user accounts and Parental control in Windows 8

  Hello

  I'll post a thread on how to manage the user accounts and Parental control in Windows 8.

  A user account allows you to connect to Windows 8. By default, your computer already has a user account that you have been
  needed to create when you configure Windows 8. If you want to share your computer, you can create a separate for each Member of your household or office user account. You can also choose to associate any user account with a Microsoft account. Signature with a Microsoft account will bring all your SkyDrive files, contacts and more in the start screen. You can even connect to another computer that has Windows 8 and all your important files will be there.

  Here is a video on how to manage the user accounts and Parental control in Windows 8.

  Also, here is a document showing you how to manager Our user on Windows 8.

  If you have any questions let me know.

  THX

  I hope it's useful.

  THX

• How do I create a Parent account to Windows Live family safety?

  Hello

  I have a Windows Live account and I have created several others to implement parental controls of Windows, but I could not.  With all the accounts that I created, I continue to encounter one or two messages error with or the other account.  It is said that "this service is not available at this time" and other States that the account is not registered as a Parent.  I read the comments to discussion threads where advice is given on how to fix known issues associated with these error messages, and none of them work for me.  When I connect to Windows Live with an account, any account, they look alike, and it is never an option to add a child with the exception of the link subsumed under permissions.  When I click permissions and click to add an account, all that I see is the ability to add social media accounts in my Windows Live account.  I tried almost every permutation I can think to solve this problem.  Provide advice.  Thank you.

  Hello

  What operating system is installed on the PC?

  I suggest that you first refer to this article:
  Family Safety: frequently asked Questions

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-security/family-safety-frequently-asked-questions/5672f7b2-e3c0-498a-9a6c-c9cab39f68e5

  You're not a parent in parental control
  https://Familysafety.Microsoft.com/?WA=wsignin1.0

  Set up parental controls
  http://Windows.Microsoft.com/en-us/Windows/set-up-family-safety#set-up-family-safety=Windows-7

  In addition, provide us a screenshot of the screen that you face at the end (stuck)

  How to include a screenshot in your message

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476A-85A6-b021181be7e4

  Let us know if it helps.

• The Internet is not accessible after the Windows Recovery virus eliminated

  Original title: Recovery Windows Virus eliminated but now no internet... what the

  I got the Windows Recovery virus and my son has deleted successfully and that he found all the files and I have the office back.  I can connect to the internet if I use another laptop but I can't connect using the infected computer.  I have contacted my provider, but they can help as I have connection so there is no problem.  I'm currently on a laptop, attached to my modem, so I know it's working.  When I use my computer and try to connect it comes up saying "Internet explorer cannot display the webpage".  There is an option to diagnose connection problems, but it does not work for me because I have a connection.  Y at - it is something I need to fix on my original computer to allow the signal through it to say: a registry or something.

  If you see stuff like this (after got rid of the malware):

  Internet Explorer cannot display this webpage
     
  The most likely causes:
  You are not connected to the Internet.
  The Web site encounters problems.
  There could be a typing error in the address.

  We will check your network connection properties.

  Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your disabled Internet access.
   
  Click Start, run and enter in the box:

  Inetcpl.cpl

  Click OK to launch the Internet Properties Control Panel, choose connections, LAN settings.

  Or, in Internet Explorer click on tools, Options, connections, LAN settings.

  These settings control your Internet access for all browsers.

  (If you make settings, write them down so you can undo changes if you must)

  On most environments, not independent, there will be check automatically detect settings and
  the other boxes are (as Proxy Server) is disabled.

  Automatically detect the setting checked =
  Use the automatic configuration script = unchecked
  Use a proxy server for your LAN = not checked

  Make changes, then click OK, OK to save the settings.

  Check your settings for how your network adapter gets its IP and DNS settings.  Most home page
  systems, these parameters must be defined for the system will get the settings automatically.

  If you have another system on your network that works, you can compare these settings with the
  parameters of the system that is not a work and make adjustments.

  Click Start, settings, Control Panel, network connections, and then select your current network connection.

  On the general tab, click Properties.

  In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

  In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings
  automatically.  Select the following two options:

  Obtain an IP address automatically
  Get a DNS server address automatically

  The rest of the options on the screen should then be grayed out/not available.

  Make changes, then click OK, OK to save the settings.

  Restart your computer and test your connection.

  If that is fixed, follow these steps:

  Click Start, settings, Control Panel, network connections, and then select your current network connection.

  On the general tab, click Properties. In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties. Advanced. There should be a tab DNS. Please make sure that the following options are selected:

  Dash in add primary and connection specific dns suffixes and an add parents of the primary dns suffix suffixes and also a check tick to save these connections addresses in DNS.

  On the check tab VICTORIES which allow you to search LMHOSTS is checked and use the default setting for netbios. Now OK out of all these windows. If you have changed a
  These settings please let us know.

• Can not turn on the filtering of the Web on the Windows family safety

  I am changing the Windows family safety web filtering and it won't let me.

  Hi peterhastieZB,
   
  As the query you posted is related to parental control, post your query in the Portal Windows Live Family Safety to improve guidance to this topic.

• Cannot move the window after resizing

  From: bronzefree

  Resize the Media Center window and inadvertently it moved off the screen.  I tried using the 'move' tab bar tasks, does not.  The multi-directional arrow appears, but can not grasp anything.  My 'reduced' Media Center window seems permanently blocked off-screen!

  I can only use enlarged, which is of course not what I want to do.

  When I "minimize", I see "stolen" to the left of the screen of the monitor.

  Someone at - it suggestions?  I'm listening, and I appreciate it!  Thank you.

  Hello RJeniski,

  Here are the commands of the ALT for Windows key:

  Windows system key combinations

  • F1: help
  • CTRL + ESC: Menu open Start
  • ALT + TAB: Switch between open programs
  • ALT + F4: Quit program
  • SHIFT + DELETE: Permanently delete the item
  • Windows + L logo: Lock the computer (without using CTRL + ALT + DELETE)

  Windows program key combinations

  • CTRL + C: copy
  • CTRL + X: cut
  • CTRL + V: paste
  • CTRL + Z: undo
  • CTRL + B: "BOLD"
  • CTRL + U: underline
  • CTRL + I: italic

  Mouse click/keyboard modifier combinations for shell objects

  • SHIFT + right click: displays a shortcut menu containing alternative commands
  • SHIFT + double click: runs the alternative default command (the second item on the menu)
  • ALT + double click: Displays properties
  • SHIFT + DELETE: Deletes an item immediately without placing it in the Recycle Bin

  Only general keyboard commands

  • F1: Starts Windows help
  • F10: Activates menu options bar
  • SHIFT + F10 opens a shortcut menu for the selected item (it is the same as right-clicking on an object)
  • CTRL + ESC: Opens the Start menu (use the ARROW keys to select an item)
  • CTRL + ESC or ESC: click on the Start button (press TAB to select the taskbar, or press SHIFT + F10 for a context menu)
  • CTRL + SHIFT + ESC: Opens the Windows Task Manager
  • ALT + DOWN: Opens a drop-down list box
  • ALT + TAB: Switch to another program running (hold down the ALT key and press the TAB key to view the task-switching window)
  • UPDATE: Press and hold down the SHIFT key while you insert a CD-ROM to bypass the automatic-run feature
  • ALT + SPACE: Displays the System menu of the main window (in the menu System , you can restore, move, resize, reduce, maximize, or close the window)
  • ALT + -(ALT + hyphen): displays the menu System of the child window (MDI, Multiple Document Interface) multidocument interface (menu System of the MDI child window, you can restore, move, resize, reduce, maximize or close the child window)
  • CTRL + TAB: Switch to the next child window of a program interface (MDI, Multiple Document Interface) multidocument
  • ALT + the letter underlined in the menu: opens the menu
  • ALT + F4: Closes the current window
  • CTRL + F4: Closes the current (MDI, Multiple Document Interface) multidocument interface window
  • ALT + F6: Switch between multiple windows in the same program (for example, when the Notepad find dialog box is displayed, ALT + F6 switches between the find dialog box and the main Notepad window)

  Shell objects and general/Windows folder shortcuts Explorer for a selected object:

  • F2: Rename object
  • F3: Find all files
  • CTRL + X: cut
  • CTRL + C: copy
  • CTRL + V: paste
  • SHIFT + DELETE: Delete selection immediately, without moving the item to the Recycle Bin
  • ALT + ENTER: Open the properties for the selected object

  To copy a file, press on and hold down the CTRL key while you drag the file to another folder. To create a shortcut, press on and hold down CTRL + SHIFT while you drag a file on the desktop or a folder. Control general/shortcut folder

  • F4: Selects the go to a different folder box and moves down the entries in the box (if the toolbar is active in Windows Explorer)
  • F5: Refreshes the current window.
  • F6: Moves between the panes in Windows Explorer
  • CTRL + G: Opens the tool go to the folder (in Windows 95 Windows Explorer only)
  • CTRL + Z: Undo the last command
  • CTRL + A: select all items in the current window
  • Back: Switch to the parent folder
  • SHIFT + click +close button: for folders, close the current folder and all parent folders

  Windows Explorer tree control

  • Numeric keypad *: expands everything under the current selection
  • Numeric keypad +: expands the current selection
  • Numeric keypad -: the current selection.
  • RIGHT ARROW: Expands the current selection if it is not expanded, otherwise goes to the first child
  • LEFT ARROW: the current selection if it is expanded, otherwise goes to the parent

  Control properties

  • CTRL + TAB / CTRL + SHIFT + TAB: move through the property tabs

  Shortcuts to accessibility

  • Press SHIFT five times: toggles StickyKeys on and outside
  • Press and hold the right SHIFT key for eight seconds: Toggles FilterKeys on and outside
  • Press and hold the LOCKING digital key for five seconds: Toggles ToggleKeys on and outside
  • ALT left + left SHIFT + NUM LOCK: Toggles MouseKeys on and outside
  • Left + left SHIFT + PRINT SCREEN ALT: activates / deactivates a high contrast on and outside

  Microsoft Natural Keyboard keyboard keys

  • Windows Logo: Start Menu
  • The Windows Logo + R: run dialog box
  • Windows logo + M: Reduce all the
  • SHIFT + Windows + M logo: Cancel collapse all
  • Logo Windows + F1: help
  • Logo Windows + E: Windows Explorer
  • Logo Windows + F: Find files or folders
  • Windows + D logo: Minimize all open windows and displays the desktop
  • CTRL + Windows + F Logo: Search for computers
  • CTRL + Logo Windows + TAB: Moves focus from start, to the Quick Launch bar, in the system tray (use RIGHT ARROW or LEFT ARROW to move focus to items on the quick launch and toolbar the system tray)
  • Logo Windows + TAB: Go through the taskbar buttons
  • Logo Windows + break: System Properties dialog box
  • Electronic key: displays a context menu for the selected item

  Keyboard Microsoft Natural Keyboard with IntelliType software installed

  • Windows logo + L: Log off Windows
  • Logo Windows + P: Starts Print Manager
  • Logo Windows + C: Opens Control Panel
  • Windows Logo + V: Starts Clipboard
  • Logo Windows + K: Opens keyboard properties dialog box
  • Windows + I logo: dialog box opens, the mouse properties
  • Windows logo + A: starts Accessibility Options (if installed)
  • Logo Windows + SPACE: Displays the list of Microsoft IntelliType shortcut keys
  • Windows logo + S: Toggles CAPS LOCK SHIFT on and outside

  Dialog box keyboard commands

  • TAB: Move to the next control in the dialog box
  • SHIFT + TAB: Move to the previous control in the dialog box
  • SPACEBAR: If the current control is a button, click the button. If the current control is a checkbox, this enables / disables the check box. If the current control is an option, this selects the option.
  • ENTRY: Equivalent to clicking the selected button (the button with the outline)
  • ESC: Equivalent to clicking the Cancel button
  • ALT + underlined letter in dialog box item: move to the corresponding item

  Let us know if this helps you. Make it a great day!

  "In the end, the love you take, is equal to the Love You Make"

• Parental controls in Windows 7

  I am trying to set up a standard account with parental controls on Windows 7 and have Norton Security installed.  I'm blocking access to the majority of installed programs, but don't know if I should leave that everything related to Norton Security so that it works as expected. Am I suppose to allow any Norton-related programs for the program works properly or even Norton will work as it is supposed to if nothing is done?

  Hello

  You can use the Windows 7 or your security 3rdparty Parental control software. Of Windows 7 Parental control options cannot be combined with your security 3rdparty software. It would be better if you check the Parental control option that would suit you better. If you decide to keep your control Parental of Windows 7, you can leave your such security 3rdparty software what.

  Kind regards

• Parental controls on Windows 7

  For more than two years, I have install parental controls with the family of security filters on the computer used by my children. I have NOT connected to the computer or seen the reports. When I try to access the reports today, it took me to a Web site where I was prompted to log in to the Site of family of Microsoft. After using my normal Microsoft credentials, there is no account or clickthrough reports.  I was asked to add a child. I don't remember creating a separate account for parental control of Microsoft. Is it possible to determine which account has been used or is the way to access these reports changed?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, you are ready to access the reports of browsing the web used by your children. Here are some articles that might help you solve the problem.

  Looking for web filtering reports and activity in the Windows Parental control?

  Set up your family

  Family Safety: frequently asked Questions

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Excerpt from the photos does not not for thumbnails in the Windows Explorer Windows 7. How can I fix?

  When you navigate to the folder my images via the Windows Explorer in general image preview would be in thumbnail mode. Now when I click on a folder that contains the image previews files all deposit 1 second after you open the file and be replaced by the standard Windows icon.

  I want to know how to fix this. I was not able to view previews via Windows Explorer since the discovery of this question, even if I chose all miniature views.
  I appreciate your help.

  No guarantee... but already posted the info
  by: Shekhar S - Microsoft technical support.   maybe worth a try.

  =====

  Q:
  Cannot view thumbnails

  A:
  Before you start make sure that you are logged on as administrator.
  Then proceed as follows:
  a. first of all, to disable the creation of thumbnail by opening Windows Explorer, by clicking on
  hold the button and selection of folder and Search Options.
  Click the view tab and check always show icons, never thumbnails. Click
  the OK button.

  b. then, run the disk cleanup on the C: drive and empty the cache so that you can retrieve
  disk space. You can find it in accessories | System Tools. Place one
  check the following thumbnails and click OK.
  Click on delete files in the confirmation window. Disk Cleanup will now be
  clear the cache of thumbnails and close.
  Note: This will delete the database of thumbnails and after reboot ing the
  computer it will automatically create.
  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  (c) in Windows Explorer, navigate to the AppData\Local\Microsoft\Windows
  file under your name.
  If you can't find it, simply copy the following text:
  %LocalAppData%\Microsoft\Windows
  Paste it into the address bar and press ENTER.
  d. right-click on the file in Solution Explorer and select Properties.
  e. Select the Security tab.
  f. click on the Advanced button.
  g. in the permissions tab, click Edit.
  h. check to include the permissions that can be inherited from the parent of this object.
  i. click on the OK button on the permissions tab.
  j. click the Yes button in the Windows security box that opens.
  k. close all open mailboxes.
  l. return to the folder and Search Options and uncheck the show always
  icons, never the photos and you're done.
  Mr., restart the computer.

  =====