Pass data from one State to another State

Similar Questions

• Need some ideas on the copy of the data from one schema to another.

  Dear all,
  
  I would like to know the best method and possible by copying data from one schema to another. (I won't use EXP / IMP).
  Example:
  
  
  I have a scheme of production on which I have hundreds of tables. I copy the data of the TEST environment after comparing data, I should copy the data incrementally.
  Maybe this copy of data may occur once a month, or on request.
  
  I want to have this done by a procedure.
  I was thinking about the logic below, using a procedure I will compare the tables and the structures between the two schemas.
  Then I willl use the primary key in both tables column and compare the data first. If the data if it does not exist then I only inserts these records in the target.
  The above said logic could be as similar as the synchronization of data or records, but the table does not all columns to track records archived / copied from the source.
  Suggest me so if you can give me the best logic or solution.
  
  Thanks in advance...
  
  Concerning
  Suresh

  GSKumar wrote:
  Dear all,

  I would like to know the best method and possible by copying data from one schema to another. (I won't use EXP / IMP).
  Example:
  I have a scheme of production on which I have hundreds of tables. I copy the data of the TEST environment after comparing data, I should copy the data incrementally.
  Maybe this copy of data may occur once a month, or on request.

  I want to have this done by a procedure.
  I was thinking about the logic below, using a procedure I will compare the tables and the structures between the two schemas.
  Then I willl use the primary key in both tables column and compare the data first. If the data if it does not exist then I only inserts these records in the target.
  The above said logic could be as similar as the synchronization of data or records, but the table does not all columns to track records archived / copied from the source.
  Suggest me so if you can give me the best logic or solution.

  I don't know why you don't want to opt for EXP/IMP.
  As an alternative, if you have a link DB between Production and Test pattern (which I seriously doubt), you can use the MERGER to a copy of data from Production to Test Delta.
  a. INTRODUCE IN test_schema.table_name SELECT sequence_columns, column_list FROM (SELECT column_list FROM prod_schema.table_name LESS SELECT column_list from test_schema.table_name)
  Column_list must not contain columns that contain sequence values because they may differ and result in an incorrect result; Therefore, this is taken into account in the outer query rather than Inline mode.
  b. MERGE STATEMENT
  c. FALL of test_schema.table_name. CREATE test_schema.table_name as SELECT column_list from prod_schema.table_name; -A way very neat to copy all the data, provided you do not keep any changes to test the tables in the schema.

  However, you mentioned to find existing records based on the primary key; IMO, primary key is normally a sequence (may be alphanumeric) and its value on env Production and Test may defer or even can have different attributes, therefore, I find it incorrect to match only the primary keys. I would say to match the key attributes.

  If you want to follow the last update/insert for a record, you can add a column that puts the time of last modification. In this way, you can track the changes of a column. Another alternative would be to use a check to the table.

  Let us know your thoughts or concerns, so that help can be provided.

  I suggest that you read and follow {message identifier: = 9360002}.
  If you will be useful if you can provide all the information required in advance to help us provide you with a quick resolution.

• What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

  Hi all

  I am new to TestStand. Still in the learning process.

  What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

  Thanks in advance,

  LaVIEWan

  I'm sorry... I discovered that... its not at all possible to pass data to another sequence using variables... it must be through settings... once again I apologize for the display of such a stupid question

• Best way to move data from one page to another within the app

  Hi all as I started to write that and was way to complicated to explain in full without a novel.

  Brief description. I use the query string that begins in the parent (from href in JSON) window must then be moved in the iframe url when moving to other pages to avoid security as a page and iframe is conflicting http and https. and are not accessible... It seems that there must be a better way.

  So my question is what is the best way in a platform open to move data from one page to another?

  You do it this way, it's in the menu.json, but when you work within the iframe and if your loading pages in applications using vairable relative URLS cross they come through.
  Discovered only this framework using the browser and you can se the construction and scope of all URLS used.

  The apps are sandboxed you cannot access aything in the parent frame, this is a feature of derliberate if something you can not do.

  As I said, you have a few methods to your own data storage space.

• Copy data from one schema to another. Reopen the Question

  Hello
  
  I had asked this question earlier to copy data from tables of one schema to another in the same database using the database link. In my previous post have mentioned below.
  

  Re: copy data from one schema to another.

  Now I am faced with the question for the remote copy of database
  
  I have created a DB connection between my local system and the remote database. with the chain of connection as shown below
  

  CREATE THE DATABASE PUBLIC LINK "MERU_DEV_LOCAL_DEV".
  CONNECT TO MERUDEV IDENTIFIED BY MERUDEV WITH THE HELP OF "MERUPROD";

  In the above script
  

  LOCAL DEVELOPMENT scheme IS
  REMOTE schema is MERUDEV

  I try to copy remote database to my local database tables using the script below.
  

  network_link DEVELOPMENT impdp = schema MERU_DEV_LOCAL_DEV = MERUDEV remap_schema = MERUDEV:DEVELOPMENT TABLE_EXISTS_ACTION = REPLACE

  But the copy of the table does not occur. What could be the problem? Please suggest me or do I need to modify the script
  
  Thank you
  Sudhir

  You can:
  -monitor the BONE with ps - ef
  -monitor data pump: jobs are dba_datapump_jobs and dba_datapump_sessions
  -monitor with logops: v$ session_longops

• copy data from one database to another

  Hello
  
  I want to copy data from one database to another.
  
  I have two patterns such as
  
  dev1/dev@ORCL
  DEV2/dev@DCEL
  
  
  I have same tables dev1 and dev2 (tables)
  but I have not given in dev2 (tables).
  now, I want to copy dev1 (tables) in dev2 (tables).

  You can also use the database link:

  select * from dev1.emp@orcl;
  

  What database are you connected to?
  You must create and use the links in the database for all other databases.

  For example if you are connected to the database A and to retrieve data from database B, you must create a connection of database in base B

  create database link B connect to  identified by  using 'B';
  

  Then you can retrieve data from database B with

  select * from [yourschema.]yourtable@B;
  

  This will work only for tables that are visible to the user that you used in the definition of database link.

  Published by: hm on 10.08.2011 22:15

• transfer of data from one server to another server

  transfer of data from one server to another server... How is possible?
  
  We used to transfer data of one cube to another using... report script... then load rule... so can we use even for that?
  but
  
  I would like to know any other comments and other means (like to explore)

  If you move the range of data to load into the different cube, then you can use report script or calc extrcat data and can use the rule files to load the data.
  If you move the data to load into a cube replicated in another environment, you can take the lev0 data and can do the free form of loading.

• Sending data from one component to another

  I want to send data from one component to another.

  Both are on the page of Main.mxml

  What is the best way to do it (without going into a frame)

  Who send data up to the main.msml via an event then complex treatment of vars public and pick up in the second pane, but is it possible to go straight?

  Thank you

  Dan

  Once the element keeps one reference to another. Or you set it to a global var shared by two components.

  C

• transmission of data from one container to another

  Hello

  Let's say I have two containers (Container1 = application, Container2).  Container1 receives data from user, do some search database and displays Container2 with database search results.

  -Container1 (call and display)-> Container2

  Below shows how I use a bindable variable in container1 for transmitting data of container1 in Container2.  Also shows how to display Container2 of container1.

  <! - Container1 - >

  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML ">

  
  

  ....
  [Bindable] public var foo:String = 'bar ';
  ....
  private void loginHandler(event:LoginEvent):void
  {
  mycontainer2 = new Container2();
  mycontainer2. Name = "mycontainer2";
  this.addChild (mycontainer2);
  }
  < / mx:Application>

  I am data access in Container2 as follows:

  <! - Container2 - >

  {mx.core.Application.application.foo}

  T1) is there a better way to transfer data from one container to another and to access the data?

  Q2) is the only way to call and display of the container1 Container2?

  Q3) how can I return to container1 Container2, i.e. Container2 call and display container1

  Container2-(back to)-> container1

  Best practices call for the use of custom events to share data between components. Here is my message from Flex 3 cookbook on the theme:

  http://cookbooks.Adobe.com/index.cfm?event=ShowDetails&PostID=15466

  To easily switch between containers 1 & 2 use a ViewStack, the gold standard for this interaction and manipulate the selectedIndex and selectedChild property:

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=navigators_3.html

  If this post has answered your question or helped, please mark it as such.

• Help: How to transfer data from one form to another form form

  Hello:

  I was wondering how / if it is possible to transfer data from form from one form to another form. I create a flow of forms, which are as follows: form of Incident report-> form of risk analysis-> error-> report form decision support survey Standard-> report form of risk control-> form of mitigation-> etc... You get the gist. It would be very time-consuming to constantly transfer the standard who, what, when, where and how from one form to the other. I was wondering how do? I have looked around on the net and this forum and couldn't find a tutorial or a guide? Is this possible with Adobe forms?

  I use a XML schema for the form to preload a list of employees and the standard list information and then publish the form to submit in PDF format for opening and tracking form mobile device. I notice that I can export the data in a form that is distributed in XML but I can't import in a distributed form. I'm a newb with code, but may contain a little of my own.

  An example of how to achieve this with a field name or something would be greatly appreciated! If you need anything, or a copy of the forms let me know!

  Thank you kindly,

  Al

  Hi Al,.

  I have here an example where the data in a single form are 'communicated' to other forms. Please note that there are specific script in each of the forms. It's a work in progress and one day I'll come back make a more polished example: http://assure.ly/qQivbm.

  See also John Brinkman's blog for a different approach: http://blogs.adobe.com/formfeed/2010/07/shared_data_in_packages_part_1.html and http://blogs.adobe.com/formfeed/2010/07/shared_data_in_packages_part_2.html.

  Good luck

  Niall

• Windows 7 hangs during the transfer of data from one drive to another

  This problem was pestering me for a long time, well over a year.

  When I transfer data from one disk to the other (generally large amounts), the computer crashes and I get a blue screen or it just restarts.

  Initially, I thought it was a faulty hard drive, so I replaced that, but the problem persisted. I ran diagnostics of smart drive on all my drives and no problems have been picked up.

  Then I replaced my RAM assuming there that all. The problem continues.

  Then I replaced the video card. The same problem.

  I then upgraded to windows 10 and the problem became more acute, so I rolled back to windows 7.

  The SSD has the latest firmware, the latest graphics card drivers.

  I think now it is one of the following two issues:

  Either my SSD drive that contains the operating system or motherboard?

  Someone at - it ideas of how to diagnose precisely this problem or how to solve it? Would contribute to a new facility?

  PC: Windows 7 SP1, AMD Phenom II X 4 965, Kingston 16 GB 1866 MHz DDR3 Non - ECC CL9 DIMM (Kit of 4) XMP beast series - HX318C9T3K4/16, AMD Radeon (TM) R9 series 200, Asus M4A87TD/USB3 motherboard

  Pilot, verified and associated usbfilter.sys from Advanced Micro Devices Inc. USB filter driver.

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  Also and important you need to update this driver since 2005.  It is a known problem in win 7 (ASACPI.sys)

  Pre 2009 this driver version is a known cause of BSOD.
  
  Please visit Asus tek computer Inc. - support - drivers and download p7p55d the
  http://support.ASUS.com/download.aspx?SLanguage=en&m=P7P55D%20Le&p=1&s=32&OS=29&hashedid=e7zic83pvqsr80lm

  Scroll to the utility category, then scroll down to the "atk0110 driver for Windows XP/vista/windows 7 32 & 64-bit" (it is about 12 down).
  Download and install it.

  Go to c:\windows\system32\drivers to check and make sure that the file asacpi.sys is stamped 2009 or 2010 (not before).  If you are using Win 8 there are at least a 2012 version that is needed for this.  If you can't find it on the site of ASUS you can download using windows update.  Read about it here

• Pass data from one XML object to an itemRenderer

  I'm trying to color the background of a column in a datagrid, and we found a sample file that illustrate the concept. However, the sample has data stored in an arrayCollection collection, while mine is in an XML object. The problem is that the data from the sample file apparently automatically passed to the itemRenderer (below: notice the trace statement). My XML object does not automatically pass to the itemRenderer data. So my questions are:

  1. is there a simple way to pass data stored in an XML object to an itemRenderer

  or

  2 should I convert my XML an arrayCollection collection? If Yes, what is the best way to do it - I tried the following, but without success:

  < mx: Model id = source = "example3.xml" / "xmldata" >
  < mx:ArrayCollection id = "myAC" source = "{ArrayUtil.toArray (xmldata. Example1)}"/ >

  Here is what the XML looks like:

  < TABLE >
  example < 1 >
  < Difficulty > 0,5 < / difficulty >
  < discrimination > 0.7 < / discrimination >
  < item 3 > < / point >
  < / example1 >
  < /table >

  Here is the itemRenderer:

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Label ' http://www.Adobe.com/2006/MXML ">
  
  <!--
  This element converter simply extends label and overrides the updateDisplayList function
  draw a filled rectangle of gradient. The colors of the gradient are determined from the
  data.
  ->
  < mx:Script >
  <! [CDATA]
  
  to import flash.geom.Matrix;
  import flash.display.GradientType;
  import flash.display.Graphics;
  
  override the updateDisplayList(unscaledWidth:Number,_unscaledHeight:Number):void function
  {
  super.updateDisplayList (unscaledWidth, unscaledHeight);
  
  var m:Matrix new matrix());
  m.createGradientBox (unscaledWidth, unscaledHeight);
  
  var Graphics = g:Graphics;
  trace("Data.COL3="+Data.col3)
  var colors: Array = (data.col3 < 2000? ([0x0000CC, 0x0000FF]: [0x00CC00, 0x00FF00]);
  
  g.Clear ();
  g.beginGradientFill (GradientType.LINEAR, colors, [0.2,0.6], [0,255], m);
  
  the rectangle is drawn a little high and a bit large to compensate for the gap
  the DataGrid control is introduced between the rows.
  g.drawRect (0, -2, unscaledWidth, unscaledHeight + 4);
  g.endFill ();
  }
  []] >
  < / mx:Script >
  < / mx:Label >

  This code example should answer your question of how to import data in the renderer automatically. It is through the dataProvider of the DataGrid and then refer to it in the renderer in the form of data. XYZ, where XYZ is the field in the XML file with the data. See FB 3 help sys on the e4x syntax.

  -mainapp.mxml-

  -MyLabel.mxml-

  -data2.xml-

  
  
         0.5 
         0.7 
         3 
     
  

• Passing parameters from one page to another in ADF Oracle 11g Release 2

  Hello
  I'm developing an Application of Web Java EE very simple, in this I am filling a grid (table) on the first screen and on the selection of a line in this screen, I have to display the records in a form, in the next page.
  I want to transmit the information of primary keys from the grid screen to the shape of the screen (2nd page) and use this information to render the data, eventually, I'll have to perform CRUD operations.
  Please let me know how to pass parameters from page 1 to page 2 and use this data in the page 2 to return the records, Oracle ADF 11 g R2.
  
  Thank you.
  Rajat
  http://rajatnigam1.blogspot.com
  
  Published by: RajatNigam on July 4, 2012 13:16

  Same page or another page - it's all the same technique.

• Insert data from one table to another

  I have two tables SALES_MASTER and SALESMAN_MASTER which is described below.
  
  SQL > desc SALES_MASTER;
  Name Null? Type
  ----------------------------------------- -------- ----------------------------
  NO VARCHAR2 (6)
  NAME VARCHAR2 (20)
  PIN NUMBER (8)
  CITY VARCHAR2 (20)
  VARCHAR2 (20) STATE
  
  
  
  SQL > desc SALESMAN_MASTER;
  Name Null? Type
  ----------------------------------------- -------- -----------------------
  SALESMANNO VARCHAR2 (6)
  SALESMANNAME VARCHAR2 (20)
  ADDRESS1 VARCHAR2 (30)
  ADDRESS2 VARCHAR2 (30)
  CITY VARCHAR2 (20)
  PIN NUMBER (8)
  VARCHAR2 (20) STATE
  SALAMT NUMBER (8.2)
  TGTTOGET NUMBER (6.2)
  YTDSALES NUMBER (6.2)
  REMARKS VARCHAR2 (60)
  
  I want to insert data from SALESMAN_MASTER (2nnd table) to SALES_MASTER(first table). I want to insert only two columns NO, NAME and PIN code. All of these columns are compatible. I tried this command. But it's not working. Help me.
  
  SQL > insert into SALES_MASTER
  2 (NO., NAME, PIN CODE)
  3 values
  4. Select SALESMANNO, SALESMANNAME, PIN code
  5 SALESMAN_MASTER;
  Select SALESMANNO, SALESMANNAME, PIN code
  *
  ERROR on line 4:
  ORA-00936: lack of expression

  INSERT INTO SALES_MASTER
     ( NO
     , Name
     , PINCODE )
     SELECT SALESMANNO
          , SALESMANNAME
          , PINCODE
       FROM SALESMAN_MASTER;
  

  Kind regards
  Christian Balz

• How can make us big data from one database to another db

  Hi all

  I have 540,00,000 records in a table. Use dblink when I try to extract data in the database for this table in another table to it-error. Is someone can you please tell me how I can extract data from table A in db1 that has 540,00,000 records in table A which is located in db2 and is empty.

  Kind regards

  Amrit

  You can also consider an insert in direct path, possibly with active parallel.

  Insert / * + append * / in...