Adobe programs are not open files adobe

Similar Questions

• I have Adobe and Acrobat and they are not open files. I need a repair or replacement. Old Dell with Windows 7 starter only computer

  Someone at - it repair for existing programs do not open files.

  Hi pappy2210,

  You can repair Acrobat from the start > Control Panel > programs > programs and features

  Select Acrobat and click 'change '.

  This would begin the repair process.

  

  Kind regards

  Rave

• programs are not open immediately

  When I try to open any program from the internet to word, thing keeps popping up and I have to click on things at random just for the program to open and it does not work when you click the icon, this screen always appears and asks me to create an association in the set Associations control panel and I don't know how to do and I wonder why I have to do?

  .doc or .docx and possibly .dot and .rtf are more associated with MS Word and what needs to be repaired.  David has provided the link to the restore process.

  In short,.

  Will will start / Default programs / associate a file or Protocol with a program / and scroll down the list until you come. doc.  It is probably not MS Word.  Click on change and change for MS Word (msy you must navigate to the executable file in the Program Files folder (or one of the Sub - folders - probably Microsoft / Office / Office12)).  Once this problem is corrected, check other file extensions and correct them if necessary.

  That should do the trick.  If this is the case with other extensions of files (with the exception of the system files) do essentially the same thing.)

  If this does not work, try a system restore.  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If this still does not work, transfer your question in the Discussion of the Office group at: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.word.docmanagement&lang=en&cr=US where people who specialize in Microsoft Word questions will be more than happy to help you with your problem.

  I hope this has helped.

  Good luck!

  Lorien - MCSA/MCSE/network + / A +.

• I always get requests to update on my office home page. After the most recent, most of my quick start icons are badges of adobe. Except a few functions are not open. When I right click on Firefox (for example) it says 'READ' instead of 'OPEN' and t

  I always get requests to update on my office home page. After the most recent, most of my quick start icons are badges of adobe. Except a few functions are not open. When I right click on Firefox (for example) it says 'READ' rather than 'OPEN' and then displays the Adobe error box. The only other answer I received (from Ask.com) is that the update was a virus. I'm not computor savy and my pc is quite old. I just want to come an hour before this recent action, but I can't open Norton power eraser or even the ability of the computer to return to an earlier point in time to cancel the action. Each of these attempts of task appears Adobe error box. I am currently showing Adobe Reader X 10,0

  Hi deanrlh,

  I apologize for the inconvenience caused. Please follow the steps in the below article mentioned: Application, file icons change in Acrobat/Reader icon

  Thank you

  Abhishek

• How can I recover the files and programs before a system restore? my document folders are all empty and my programs will not open!

  How can I recover the files and programs before a system restore?  my document folders are all empty and my programs will not open!

  I know they are there and hidden somewhere, but this restoration took my settings of the computer to 2004! We lost all our data, our software that we use to operate our company at home, our quickbooks that has all our financial data, family photos, videos, Outlook will work not so no e-mail, all turned in time and 6 years ' worth of documents have disappeared.

  What happeneded was that I was trying to upgrade to quickbooks software when I got an error, I cancelled out of the facility, then restarted and that's when I got an error hal.dll something? I thought about a system restore would allow me to go back in time to just before when the error occurred, but he basically took my computer back to factory settings, so all the programs that I installed and paid hundreds of dollars for the past six years has disappeared, Microsoft Office and very expensive construction estimating software that we wil have to pay once AGAIN for If I can't get this program working properly.

  I am a fool! I can't believe what's happening.

  Someone at - it instructions on how I can retrieve either the programs and data that I need specifically or how to go and seek shade from the files I read online on and restore my computer for about 12 hours ago?

  Thank you all!

  Sally in Georgia

  Looks like you did a system rather than a system restore recovery.  If you have inserted a disc supplied with your machine and booted from it, you probably erased the disc and installed the original operating system provided with your computer.  Usually, a step in this recovery is to do a full format or quick of your drive.  If you did a full format, your data is permanently lost.  With a quick format, your data may still be there, somewhere but inaccessible by normal means.  Applications must generally be installed, in order to recover the files probably will not help unless you have the original installation media.  Your other data files (images, videos, financial data) may be salvageable, but at this point, it would be advisable to take your computer or your disk to a business/professional who is experienced with data disc recovery.  It will be cheap and there is no guarantee.

  Impatient, remember investigate you a backup strategy for your computer and critical data.  Hard drives can go wrong with little or no warning.

  HTH,
  JW

• I am trying to be moved from the first, but in the list of adobe programs to download, rather than see the installation option, there is only the opportunity to evaluate, and once the download is finished the program will not open. What should I do to dow

  I am trying to be moved from the first, but in the list of adobe programs to download, rather than see the installation option, there is only the opportunity to evaluate, and once the download is finished the program will not open. What should I do to download the first?

  If you have a first subscription (check here, Adobe ID) and you have a 64-bit computer, Troubleshooting FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

• I bought and installed Photoshop elements 13. The program does not open says bur I have to register on my Adobe ID that I have. Then, I get a box saying I'm not online or my computor clock is out of adjustment. The clock is correct for the time and I have

  I bought and installed Photoshop elements 13. The program does not open but says I have to register on my Adobe ID that I have. Then, I get a box saying I'm not online or my computor clock is out of adjustment. The clock is correct for the time being, and I am on the line what should I do?

  See the link below:

  Photoshop elements 13 - can't get a response code in the offline activation method

  Re: I have uploaded a second copy of Acrobat Pro DC to my PC. By clicking on the icon gives your computer is offline or your computer's clock is set incorrectly?

• .exe files are not open; affected by the Windows Security Center of lazy virus

  Hello!

  As the title indicates, none of my executables will open his; on the contrary, when I click on an icon or similar function (as in the start menu), I'm inclined to the screen 'open with... ». I noticed that most often, if I run the program as administrator, it is likely to work without having to manually find the file - still a bit tedious however.

  I'm assuming that since I was recently hit by the virus which is a fake Windows Security Center, something my registry has also been hit (take into account the fact that I'm not savvy computer in the slightest). It happened on my user account initial and rather than take action on the right, then, I decided that I would use the other account that I had to install a program better anti-virus (Norton provided ISP) than the one I had been using (the two admin). At that point, I had finished all my activity moved to the new account and it worked very well until the virus had one possessing this account as well - delete on the first user account seemed to have deleted only the effects of my account but still affected everything I did after that. This time, I went and deleted all accounts and checked to ensure that it is not at all. After getting rid of the virus, it's the same thing: none of my .exe files will open without using the monitor "open with...". ». I'm not really sure what action to take from here, I have not done much to remedy the situation, and I'm going right through the screen of "open with...". "to get to what whatever - so any suggestions or help would be very appreciated.

  Keypoints:

  • .exe files are not open (However, in some cases, the "Run as Administrator" option overrides it)
  • recently hit with (deleted) and fake Windows Security Center virus ; That's when the .exe is no longer
  • is not much in terms of addressing this problem, do not know what to do with regard to the question of if my situation calls for something specific

  I tried to cover everything that seemed important to address; However, if there is more need information, let me know. I am about average in terms of computer navigation and therefore my understanding of what many of these commands, functions and files is a bit Basic.

  Thank you! :)

  Thanks for the very comprehensive post. Run the Doug Knox fix (that isn't a .exe that you can do this).

  http://www.dougknox.com/XP/file_assoc.htm

  Then follow the instructions to delete here:

  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  MS - MVP - Elephant Boy computers - don't panic!

• All of my icon are icons of java. When I click, a back short style window appears, then disappears. I can not open files or links. What is the simple solution?

  All of my icon are icons of java.  When I click, a back short style window appears, then disappears. I can not open files or links. What is the simple solution? This CHANGE occurred on 15 July.

  The simple solution is:

  1. type the word restore in your Start menu.  Some options will appear.  Choose to restore the system and settings files
  2 - Click Next, choose July 14 (or a date before the problem occurred), and then click Next again.  Your system will restart with repaired parameters.
  Let us know if it works for you.

• I have a new computer and try opening PDFs from other web sites. They are not open. What should I do to open these files?

  I have a new computer and try opening PDFs from other web sites. They are not open. What should I do to open these files?

  Thank you for your help, but I thought about it.  It was very simple & silly, something I would have thought from the outset. I had to add permissions to the pop-up blocker. Silly me had a "blonde moment"... no offense to blondes, just using the cliché. Laughing out loud!!

• .bat file changed in an .exe file that opens a file linked to the main program does not open after packed

  Here's what's happening.

  I have an add on package I wanted to pack with a main program.  The problem is that the add-on is not an .exe file so I had to make a .bat file to open it, which, unfortunately, is not recognized as a user entry point.   So I converted the file .bat to .exe file so that I could create a user to this file entry point.

  It is a situation similar to opening a word document and it will automatically open Microsoft word.  Only in my case I create a batch file for this word document and then convert it into a .exe file so I could create a user for this document entry point.

  So in my case after it's all packed to the top and I run the user entry point, I get an error could not open file.  Is that what I would call a linked file?  I'm packing up under copy writing/isolation mode and not in merged mode.

  Any ideas?

  Hi Christopher2222,

  In most cases, you won't need to run the application during the capture process. In some scenarios it will probably a solution to set some values "first round" for an application.

  In this case, you try to start a batch (bat) file. All Thinstall/ThinApp scenarios with a bat file to add this to your package.ini

  giveitaname.exe

  Source=%SystemSystem%\cmd.exe

  Shortcut = YourPackageContainer.dat

  CommandLine=%SystemSystem%\cmd.exe/k C:\PathToYourBatchFile\start.bat OptionalParameter1 OptionalParameter2

  The UNC path is not recommended.

  Best regards

  Christian Janssen

  CIS - Group.nl - VMware and Thinstall partner

• NCO files are not open

  NCO files does not open

  Uploaded photos of old pc again using disc. Nero was used as it was the old pc and new pc will not open files. Windows 7 now, old pc is xp. Help. No nero on new pc, any software available to help? Thank you

  To ask what is obvious, why not put Nero on the new PC?

  Use Nero ZIP compression of backup files, if they have not been encrypted, change the name extension of * .zip.

  James Wolf MS - MVP [Multimedia]

• New PC with Windows XP, XP replacement. My PDF docs are not open

  New PC with Windows XP, XP replacement. My PDF docs are not open and I get the following messages: BE Adobe Reader could not open 'xxx.doc' because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded). OR Word now converts your PDF in an editable Word document. This can take some time. etc. Help please.

  You have Microsoft Word installed? If so, it seems that you need to change your file associations so that Word opens files .doc instead of the player. To do this, select a .doc file, right-click and choose "open with > choose default program", select MS Word and make sure that "Always use the selected program to open this type of file" is selected.

• Apps and PSE 6 program will not open.

  PES 6 program will not open in the start menu or Windows Explorer and editor and organizer applications will not open in Windows Explorer. All files are listed in US and will not empty. This has happened recently, after that I used the program a few years. Should I reinstall the program? If so, the catalog will have to be re-created? There are over 7000 photos in the catalog. I use Windows 7 Home Premium.

  Try to open Orgnaizer and editor-in-Chief of there respective exe with the Welcome screen running.

  Organizer: C:\Program Files (x 86) \Adobe\Elements 6 Organizer\PhotoshopElementsOrganizer.exe

  Publisher: C:\Program Files (x 86) \Adobe\Photoshop elements 6\PhotoshopElementsEditor.exe

  Welcome screen: C:\Program Files (x 86) \Adobe\Photoshop elements 6\Adobe Photoshop Elements 6

  PS: The two paths for the 64 bit OS. For use of the OS 32 bit: C:\Program Files

  If it does not help, try uninstalling and reinstalling PSE again. Uninstall/re-intall process will not suffer your catalog.

  ~ Andromeda

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.