Password change listener

Similar Questions

• Everyone knows a message popping up requiring a password change?

  seemed a bit fishy, so I ended up reseting my phone. I never got a message like this and change my password often. I hope that's not a bug.

  Used to be 4-digit codes. Demand could change to a 6-digit?

  Normally, iOS request password changes, a few requests to enter.

• That the restoration of a backup time machine, a previous password change?

  That the restoration of a backup time machine, a previous password change?

  It could, if the last backup was performed before the change of password, and she understood this password file.

  But if you are missing a password, see this article on the search for your password with the keychain:

  Cess.html http://www.Macworld.com/article/2013756/How-to-Manage-passwords-with-keychain-AC

  The fact that Time Machine does not have backed up prior to the change, or discarded a way to backup older you may have missed an opportunity to save, if you have changed it.

• How to save a password changed in Firefox? I rescued him, but then I changed the password and it doesn't give me an option to save the new password. Help, please. Thank you!

  How to save a password changed in Firefox? I rescued him, but then I changed the password and it doesn't give me an option to save the new password. Help, please. Thank you!

  The Web site may use autocomplete = off to prevent Firefox to record the name and the password.

  You can remove autocomplete = off with a bookmarklet to register the name and the password of Firefox.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered
  • Saved password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

• Field change listener vs Focus Listener

  I would be grateful if anyone can identify the changes to the field vs focus change listener listener. For example, when a modified image button developed, which qualifies for a focus change but would be also a change of field?

  When to use a listener to changes in the field?

  FocusChangeListener is quite different from FieldChangeListener... FocusChangeEvent triggers when a development of a field or a lost field won focus (navigation of movement) or just slider field... But the FieldChangedEvent poses only when an event occurs on this component, that is to say A button click event, an event setText on a text field...

  Thank you!

  EDIT: TYPO FAULT

• The code of failure of the authentication protocol Kerberos was "the user account has been automatically locked because too many attempts to invalid login or password change attempts have been requested.

  Hello

  I use Windows 7 (32-bit) with SP1.

  Quite often (at least three times a day) I am to be locked of my PC and cannot connect to 30 mts each time. I've analyzed carefully and there is absolutely nothing wrong with my ID on the front of Windows AD or group etc. policy.

  I am getting event ID 40690 in my observer of events and here are the details...

  WARNING on 09/06/2011 09:07:54 lsasrv 40960 any

  Log name: System

  Source: lsasrv with

  Date: 09/06/2011 09:07:54

  Event ID: 40960

  Task category: no

  Level: WARNING

  Keywords:

  User: SYSTEM

  Computer: workstation.companyname.com

  Description:

  The security system detected an authentication for the HTTP/http-proxy server error - nom_societe.com. The code of failure of the authentication protocol Kerberos was "the user account has been automatically locked because too many attempts to invalid login or password change attempts have been requested.

  (0xc0000234).

  I searched all possible sites and cannot find an appropriate solution.

  As it is causing a lot of inconvenience would appreciate a miracle solution as soon as POSSIBLE.

  See you soon,.

  bcshekar

  Hi bcshekar,

  The question you have posted is related to the area and would be better suited to the net Tech community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/threads

• PuTTY and password change issue ACS server

  When a new user is created with the checkbox 'Must change the password at the next logon' checked, ACS does not allow the user to change the password.  The password prompt displays a message access denied. Could someone point me in the right direction to solve this problem?

  I created a new account on cisco ACS server and check the box "user must change password at the next logon". I then used ssh to test the newly created using PuTTY user account. When I ssh to the cisco devices [switch or router] password prompt appears and ask me to type the new password. Once I did this I get a message access denied.

  It worked well with secure CRT. But users do not have secure CRT, they are supposed to use PuTTY. Users can connect in devices using PuTTY. The problem is that when we try to change the password.

  ACS Version: ACS 4.0

  Thank you

  Nachi

  When a user connects in SSH to the system and uses an expired password GANYMEDE, he is prompted to change their password. However, this password change does not work correctly.

  To resolve this problem, you must have the SSH v2 with "Keyboard interactive" authentication for SSH v2 game. Cisco bug ID CSCin91851 addresses this problem.

  Symptom:

  When you use the router as a ssh server is authenticating with a normal SDI/RADIUS, work of authentication backend. However, neither the new BUGS mode or mode next token dialogues completes successfully.

  Conditions:

  Problem only occurs in mode again PIN or next token dialogue mode.
  Specific SSHv2

  Workaround solution:

  Use telnet for authentication or to define vty lines to authenticate against RADIUS
  (non - SDI) server instead.

  Other Description of the problem:

  Not all ssh clients are supported the dialogue for the new PIN mode or next token to work.

• ACS 'Password change rule' does not work with telnet

  Hello:

  I am configuring users will have to change their password when they enter a network device, the first time they connect.

  I have a camera ACS 4.0, the option "disable TELNET change password against this ACS and send the following message to the telnet users session" is disable. When I try to enter in a Catalyst 6500, for example, I type user and pass and I get rejected (RADIUS is the protocol used).

  In the reports of the CSA, I can see, it seems the following error "Impossible authentic - CS expired password.

  I activated the option 'Apply the password change rule' in group settings, other options for the 'password aging rules' are disabled.

  Thanks for your help,

  Francisco

  You can use GANYMEDE + to get the change of password to work.

  Does not work with the RADIUS.

• People App "your password changed. Sign in with your new password'.

  I cannot synchronize the application 'People' in Windows 8. Whenever I start the application it synchronize for a second and then tell me "your password changed. Sign in with your new password'. I have not changed my password at all and it won't connect or sync with anything. Any ideas or anyone who deals with this problem? I tried to change the settings, uninstall and more but no luck.

  I had the same questions as everyone else ("your password was changed... ("error, only Microsoft app listed, adding Facebook didn't work, etc..).  I also used an e-mail provider.

  I tried to switch to a local account, restart and return to a Microsoft account.  It worked!  Microsoft and Skype both appeared in the people app immediately (Skype was not there before, but I had already installed the app) and I was able to add Facebook without problem.

  After the switch to a Microsoft account, I got a text asking to confirm my PC with a code.  I followed the instructions and did.  I have no idea if it was part of the original or not problem.

• IOM - Forced OAM of password change signout redirection URL

  Hello

  We have integrated the OAM and IOM 11.1.2.2 using a DCC 11g webgate.

  SignOut IOM correctly goes to the page of disconnection, OAM.  Aclose with the help of IOM forgotten password OI featureM redirects to the OAM login page.

  My problem occurs when a user is forced to change their password at the first login.  Screens of the IOM appears as expected, but after completing the page and clicking on 'Submit', the display shows an error ' ADFC-02017: the value of the url cannot be null or empty.  Logs show SSOAutoLoginHelper: redirect Signout URL: null.

  Change of password is successful, is just the redirect which fails.

  Can someone tell me where the redirect Signout URL must be set?

  Thank you

  Darren

  Thanks for your reply, but it's an integrated OAM and IOM put in place there is no link of password change created by me.

  In my case, that error was because OID obpasswordchangeflag is set to true but that IOM usr_change_pwd_at_next_logon has not been set to 1.

  This because the IOM has been upgraded from a version 10g, who has worked with an OAM 10 g version where all the functionality of password entrusted by OAM 10 g, if no user was never their flag usr_change_pwd_at_next_logon is set.

• Impossible to trigger value change listener for a checkbox custom AF: table

  Hi all

  IAM using Jdev 12 c.

  I have a created a table and a list bound to the table. The values are perfectly filling. I added a checkbox as another column. All select/deselect the box, no event is triggered... Please find below the the code I used.

  JSPX code binding the table and column checkbox

  < af:table var = "row" rowBandingInterval = "0" id = "t1" binding = "#{EmployeeTableList.empTable} '"

  contentDelevery value = "#{EmployeeTableList.empList}" = "immediate" > "

  < af:column sortable = "false" headerText = "EMPID" id = "c1" >

  < af:outputText value = "#{row.empid}" id = "ot1" / > "

  < / af:column >

  < af:column sortable = "false" headerText = "EMPNAME" id = "c2" >

  < af:outputText value = "#{row.empname}" id = "ot2" / > "

  < / af:column >

  < af:column id = "c8" headerText = "Select" >

  < af:selectBooleanCheckbox label = 'Label 2' id = 'sbc2' autoSubmit = "true" value = "false".

  valueChangeListener = "#{EmployeeTableList.newlyCreatedMethod}" / >

  < / af:column >

  < / af:table >

  I tried the javascript also, but not luck at all... If you use IAM table datacontrol and adding a column of the box... value change listener is triggering perfectly.

  Please help me. Thanks in advance.

  Concerning

  Leprince

  Hi Ram,

  Thanks for the reply... I can trigger other events in the table.

  Finally, finally, I got solution... I use the scope of the request for the bean managed in my application. I changed the scope of the request to see... then is triggering events to change value perfectly.

  Thanks everyone for the help and support!

  Concerning

  Augustin Leprince

• disable the value change listener until the previous process is complete

  I use Jdeveloper 12.1.2

  I have a text field that has a value change listener. The listener calls a function that manages a number of process and queries. The function then clears the text entry field and focus the cursor in the text entry field.

  My problem is that the user will enter the text back to back quickly it causes all locked up. Is anyway to prevent the user to enter additional text before the end of the listener.

  I tried the following, but he has not always prevented the user. At the beginning of the listener:

  FacesContext facesContext = FacesContext.getCurrentInstance ();

  UIViewRoot root = facesContext.getViewRoot ();

  InputText RichInputText = (RichInputText) root.findComponent ("it4");

  inputText.setDisabled (true);

  AdfFacesContext.getCurrentInstance () .addPartialTarget (inputText);

  then at the end of the listener, I re activated the field.

  inputText.setDisabled (false);

  AdfFacesContext.getCurrentInstance () .addPartialTarget (inputText);

  Maybe this can help: http://www.jobinesh.com/2010/10/preventing-user-input-on-fusion-web.html

  Dario

• password change date

  Hello

  What data dictionary, I know that when my sys or other user password has been changed.

  Concerning

  Rabi

  dbksunil escribio:

  Hello

  Oracle follows the expire of the password based on when it was most recently modified. So, looking at the DBA_USERS. EXPIRY_DATE and subtracting PASSWORD_LIFE_TIME you can determine what password was last changed. The last password change time are also directly from the PTIME column visible in dictionary USER table $ (view DBA_USERS based).

  If you have PASSWORD_REUSE_TIME and PASSWORD_REUSE_MAX contained a profile assigned to a user account you can reference dictionary table USER_HISTORY$ for when the password has been changed for this account. This will keep any password which always falls within the limits PASSWORD_REUSE_TIME and PASSWORD_REUSE_MAX.

  Must run this query after the Sys user login

  SELECT user$ .NAME, use$. The user PASSWORD$ .ptime, user_history$ .password_date

  OF SYS.user_history$, SYS.user$

  WHERE user_history .user$ # .user user = $ #.

  =========================================

  OR try this query:

  SELECT name,

  CTime,

  PtIMe

  FROM sys.user$

  WHERE name = 'username ';

  Note: Replace-USER NAME with the user name you need to know the information.

  CTIME tells - moment of creation

  PTIME indicates - change time password

  Thank you.

  Lol, you forgot to copy the last sentence: "under the direction of: varun4dba February 3, 2011 19:28.

  Of

  Password last changed date

  At least paste the link from which copy you it... does not the words of others

• copy the input values in the text the text of input 2 input 1 using the value change listener

  Hello

  I have two text entry:

  input 1 & 2 text text entry.

  I need to copy in the text of entry 1 input values to enter text 2.

  How to apply this using value change listener?

  I did the following steps:

  (1) I chose 1 text entry and chose listener Value Change-> edit.

  Type a new name for bean & class.

  Should what the name of the method I add?

  Any help please?

  Hello

  Just follow the steps below.

  1 create a jspx page and drag drop two intput text on the page.

  2 linking these two text of entry to bean managed on the basis and the scope of bean on bean with property name inputVal1, inputVal2 and backing

  3. Select the input text 1, go to valueChangeListener property and use the existing bean and give some name of method and the copy of the code in the method below

  inputVal2.setValue (inputVal1.getValue () m:System.NET.SocketAddress.ToString ());

  4. set the autoSubmit = true for the 1st input text. Set partialTrigger = it1 (it1 is id of the 1st input text).

  Now run the page

  Thank you

  Nitesh

• Pass a value change listener to a declarative component

  I use JDeveloper 11.1.1.6.0
  I am able to create my declarative component, but I need the ability to switch in listeners of different value changes depending on where the component is used, and sometimes I need to have no value for the component change listener.
  Currently, I tried to get the element with an attribute "ValueChangeListener' of type 'javax.el.MethodExpression' and gave the EL method in the method that handles the value change events. However, whenever I run the application, I get the following error at an event for change of value on the component. It acts as if I am the EL of passage is empty, but I do not understand why. I approach this issue the correct way or is there another approach recommended for this? If I approach it as expected, I have help to determine what I am doing wrong?
  
  ----------------
  error
  

  <LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase PROCESS_VALIDATIONS 3
  javax.faces.el.EvaluationException: Method not found: {}.ValueChangeListener(javax.faces.event.ValueChangeEvent)
       at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:58)
       at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)
       at org.apache.myfaces.trinidad.component.UIXEditableValue.broadcast(UIXEditableValue.java:214)
       at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
       at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
       at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
       at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
       at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
       at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:444)
       at javax.faces.component.UIViewRoot.processValidators(UIViewRoot.java:701)
       at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl$ProcessValidationsCallback.invokeContextCallback(LifecycleImpl.java:1422)
       at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:397)
       at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
       at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
       at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
       at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
       at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
       at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:62)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
       at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
       at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
       at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
       at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
       at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
       at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
       at java.security.AccessController.doPrivileged(Native Method)
       at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
       at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
       at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
       at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
       at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
       at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
       at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
       at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
       at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
       at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
       at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
       at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
       at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
  <XmlErrorHandler> <handleError> ADF_FACES-60096:Server Exception during PPR, #1
  javax.servlet.ServletException: Method not found: {}.ValueChangeListener(javax.faces.event.ValueChangeEvent)
       at javax.faces.webapp.FacesServlet.service(FacesServlet.java:270)
       at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
       at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
       at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
       at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:62)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
       at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
       at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
       at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
       at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
       at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
       at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
       at java.security.AccessController.doPrivileged(Native Method)
       at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
       at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
       at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
       at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
       at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
       at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
       at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
       at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
       at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
       at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
       at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
       at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
       at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
       at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
       at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
  Caused by: javax.faces.el.EvaluationException: Method not found: {}.ValueChangeListener(javax.faces.event.ValueChangeEvent)
       at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:58)
       at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)
       at org.apache.myfaces.trinidad.component.UIXEditableValue.broadcast(UIXEditableValue.java:214)
       at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
       at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
       at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
       at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
       at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
       at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:444)
       at javax.faces.component.UIViewRoot.processValidators(UIViewRoot.java:701)
       at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl$ProcessValidationsCallback.invokeContextCallback(LifecycleImpl.java:1422)
       at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:397)
       at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
       at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
       ... 38 more

  The declarative component level code

  <af:componentDef var="attrs" componentVar="component">
  ...
  <af:inputText label="#{attrs.Label}" id="dc_it1"
                        valueChangeListener="#{attrs.ValueChangeListener}"
                        partialTriggers="#{attrs.partialTriggers}"/>
  ...
  <attribute>
            <attribute-name>
              ValueChangeListener
            </attribute-name>
            <attribute-class>
              javax.el.MethodExpression
            </attribute-class>
          </attribute>
  ...

  test code of the page

  <af:panelFormLayout id="pfl1">
            <af:panelGroupLayout id="pgl1" partialTriggers="cb1">
              <gt1:customInputText id="cit1"
                                        Value="#{backingBeanScope.Section508TestBean.val}"
                                        Label="aeqawefawe"
                                        ValueChangeListener="#{backingBeanScope.Section508TestBean.valueChangeListener}"/>
            </af:panelGroupLayout>
            <af:commandButton text="commandButton 1" id="cb1"
                              actionListener="#{backingBeanScope.Section508TestBean.changeAndRefresh}"
                              partialSubmit="true"/>
            <af:inputText label="Label 1" id="it1" autoSubmit="true"
                          valueChangeListener="#{backingBeanScope.Section508TestBean.valueChangeListener}"/>
          </af:panelFormLayout>

  Hello

  In JavaServer Faces, components raise events to notify the application of a change or user interaction. The declarative elements in Oracle JDeveloper 11g allow the component developer spend events and actions of the method to the page of your. A method's return type and optional arguments that are passed to the call. On the page of your, ExpressionLanguage is used to bind the method property of the component to a managed bean with the expected signature method.

  If you create a method attribute (method tab) and click the button [...] in the field of the method Signature. Define the return 'null' and the parameter type of method like "javax.faces.event.ValueChangeEvent" then you can set up a change of value for her listener in the consumer application

  So what you did is simply not the right approach

  Frank