Pavilion dv7 - 4197cl: 2nd set of recovery disks still does not.

Similar Questions

• Recovery disk works does not after replacing hard drive Pavilion dv7

  Hello. I have problems of replacement of a failed hard drive in my HP Pavilion dv7-6154nr notebook running Windows 7. New HARD drive seems to install OK, but I get a Windows Boot Manager error when I try to run the recovery disks created when the system was purchased. The message says "the boot selection failed because a required device is not accessible" "status: Oxc000000f. I changed the boot order in the BIOS to boot from the internal DVD player but continue to make the same mistake

  More info: I upgraded the HARD drive from a Toshiba MK6476GSX - 640 GB - 5400 RPM for a WD Black 7500BPKTSP.  I don't see any info in the new HARD drive in system information / BIOS so I don't know if it is recognized. However, it take and pass a diagnostic test.

  Thank you.

  You are the very welcome.

  Now you get the drivers from the support page and driver for your PC.

  http://h10025.www1.HP.com/ewfrf/WC/softwareCategory?CC=US&DLC=en&lang=en&LC=en&Product=5151752&Task= &

  If you have a problem to find drivers (such as the wireless, unless you already knew what the wireless adapter model you have in the PC, you will not know which driver to install).

  Just after the hardware ID's for all you can't find the drivers.  Who need device drivers appears in the Manager for devices with a little yellow. brand and labelled with material generic terms such as a network Contoller or PCI device, etc.

  If you don't know how to find the hardware ID, please read the info on the link below.

  http://www.DeviceDriverFinder.com/blog/device-drivers/how-to-check-the-hardware-ID-for-a-Windows-device

• My hard drive crashed and when I try to run the recovery disk it does not.

  my laptop is only a year and a half...

  my hard drive crashed on my laptop and now it won't start. It has the recovery disk that the pc had to do, but when I went to run, he did not. I have my windows xp home key, but I have not the real CD... can someone help me with this

  Hello

  I suggest you to contact the manufacturer of the laptop to help you, as the laptop is in no start-up situation.

  It will be useful.

• When windows asks me to isnert a password recovery disk, it does not offer the possibility to create one in the D drive, where I have a DVD. Why?

  I have a new Dell XPS with Windows 7 Home computer. I want to create a password recovery disk. I have (1) check my CD/DVD drive works (2), I watched the video on how to create a password reset disk (3) I did the procedure successfully in the past on other computers (4) I rebooted the computer after having difficulty finding the opportunity to insert a disk in drive D, the name of the drive for my DVD / CD player. What is the problem?

  The problem is that when I am asked to insert a disc in the player I'd give myself a choice is not drive D, the name of the drive to my CD/DVD drive.
  So over and over again once I wonder to insert the disc. I also have one of these drives you can put 4 holders memory size different from the type used in cameras and I have a DVD player, it is called D drive.  Why I'm not given the option to use drive D when I'm given a choice I can insert a disc so that the password recovery disk can be created?

  Change the assignment of drive letter for the dvd player to one letter other than.

  1. sign the computer as an administrator.

  2. Insert a disk in the removable drive.

  3. type computer management in the start search box and press ENTER.

  4. click on disk management.

  5 right-click the partition, logical drive or volume that you want to change and then clickchange drive letter and paths.

  6. click on the removable drive, click it, clickchange, click the drive letter that you want to use, and then clickOK.

• Gateway MD series laptop with Vista once the challenging 'restore point', white screen, will not start, I tried Gateway system and recovery disks, still can not start?

  Gateway MD series laptop Vista OS.

  I tried to install disks system recovery, ordered the bridge.

  The machine do nothing, black screen, no prompt, no way to install the OS, no start upward

  Hello

  did you put the dvd player must be 1st in the boot order

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  _______________________________________________________

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  http://support.gateway.com/us/en/support/default.aspx

• HP Pavilion dv7: latest updates automatic corrupts OS. PC does not restart.

  After several upgrades of MS has been installed recently (25 +) reboot could not complete successfully and my only alternative was to restore to a previous restore point.  Automatic updates immediately reinstalled the upgrades and the next time you start gave rise to the same question.  Now, I have disabled the automatic updates to prevent this does not happen, but I don't know how to move forward.

  Has anyone else seen elsewhere?  Any advice?  My one year warranty expired last month.

  Hello

  First of all I believe guaranteed software is shorter than the 1 year warranty on hardware. In this case, something to do with Microsoft products and I think that HP can help you, they'll send back you to Microsoft. My suggestion: updated one by one, that the pain, BUT you will be able to eliminate one causing the problem. We can work on this problem later.

  Kind regards.

• HP Pavilion dv7-6c23cl Entertainment Notebook PC usb 3.0 does not

  I had a hard drive failure and replaced by the new drive. Did a clean install of Windows Home Premium x 64 and have since had several items listed in found as unknown/no drivers Device Manager.

  One of the effects noted is the 3.0 USB ports on the left do not work properly. They provide power but not all devices will read. Standard ports on the right function fine.

  I did several laps of windows updates and downloaded and installed all the drivers that are related to this page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5218...

  The other devices listed in device with warnings (!) Manager are:

  BCM20702A0

  SM Bus controller

  Universal (USB) Serial Bus controller (listed 2 x)

  Any help or advice would be greatly appreciated.

  Hello:

  Please install the AMD chipset driver and reboot. You want the first file on the Web page.

  Who should install the smbus and usb 3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  The other device's bluetooth BCM radio that needs a driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-96962-1

• I'm trying to view the photos on my pc on my tv samsung, which has a wireless connection to the computer via the router. I spent a lot of time setting up, but it still does not work! Work.

  Recently I bought a Samsung smart tv I want to connect it to my pc so that I can view the pictures and videos on my TV. I have a connection through the modem but the pictures do not appear on the TV.

  I did the same thing only to realize that a standard USB cable will not work. Make sure that you connect your computer to your TV using a HDMI cable standard. They are not perfectly retangular than a USB cable and have edges around the corners of slightly rounded connectors. Can be purchased at most stores computers or shack radio for about 17 or 18 dollars 6 feet long.

• S52060f Pavilion Slim Line: how create a set of recovery disks is service pack 1 burn on the disc

  Hello

  No problems with one of my desktop windows 7 but have some questions and concerns.   Outside my thin line, I have 2 other computers hp windows 7.  They are p6510T CTO Desk Top clubhouse and Pavilion HPE H8m Desk Top.   I created my own set of recovery for each computer cd.   When I created the recovery discs, I don't remember if my computer came with service pack 1 preinstalled by buying them directly at Hp.     My first question is this.   Do plant purchased hp computers come with service pack 1 already preinstalled.

  Next question.   If they do and the recovery discs that I burned for each service pack 1 image, too, be burned on the disks.   Finally.   Is there a limit to the way in which many times can I use my recovery by computer disks.

  You place your order of recovery disks is not possible that they are discontinued.   I also undertand after reloading windows I can load the service pack 1 back when running a windows update.   But it is easier to have service pack 1 already imaged on any set of recovery disks.   If some can please please point this out.    Thank you.

  If you create recovery discs when you got the computers, you can use them as many times as you want as long as they continue to work.  SP1 would not be included.  I don't think that they were not in what you received initially.  They come through Windows Update, see the center of update and the Service Pack

  http://Windows.Microsoft.com/en-us/Windows/service-packs-Download#sptabs=Win7

  The recovery disc for the p6510t are available at the surgeons of the computer if necessary:

  http://www.computersurgeons.com/p-22691-Windows-7-64-bit-10nasucw603-recovery-kit-589980-zh9-for-HP-Pavilion-Desktop-PC-model-number-p6510t.aspx

  The model s52060f turns out to be incorrect, please confirm.  The number of HPE H8m is incomplete, shall be read as

  HPE H8m K8300 for example.

  Maybe you should look at the backup to hard disk image using something like Macrium reflect free.  Check it out:

  http://www.Macrium.com/help.aspx

• Why am I being asked to do another set of recovery disks?

  I made the one and only set of recovery disks, following the instructions.

  Now, I get an alert in HP Advisor instucting me to make recovery disks.

  Why would I receive this alert?

  P8, it sounds to me like HP Advisor did not get the message. I would try to make the disks again to see what happens.  If it lets you do, HP Advisor should be satisfied.  If this isn't the case, maybe that will satisfy HPA, also.

• When turning on pc and when the acer logo appears it asks to enter the current password, I bought the recovery disk but do not get a chach to enter the bios

  When turning on pc and when the acer logo appears it asks to enter the current password, I bought the recovery disk but do not get a chach to enter the bios

  This looks like a utility Acer protect disk hard & possibly also the BIOS.  You will need to consult your manual for Acer.  You have configured a password of HDD that you are now trying to recover, by chance?  This recovery is not possible if the hard drive has been password protected.

  If it was a Windows login screen then it would show your user/admin name and password entry area & would be clearly identified as a Windows form of the version of Windows being displayed at the bottom of the screen.

• Re: Satellite L300 - made recovery but disc does not work

  I have a Satellite L300 and did a few sets of recovery discs from what I read some brands work and some don't, and none have so far.

  Insert Diskette 1, press the button and hold F12 key until the startup option appears.
  Select CD/DVD and then back type box appears with X:\windows\system32\cmd.exe - startnet.cmd
  and in the box waiting for ODD vacancies...

  You can add several points after that as nothing is more - so three sets of recovery disks on three different brands of DVD any advice would be pleaseing!

  Brian

  Hello

  According to your description, the system restore procedure does not start, and the STRANGE can not read the disc.

  In your case I would recommend recover laptop using Toshiba HDD recovery.
  You can start the procedure of HARD drive; Press F8, choose repair my computer, Toshiba HDD recovery.
  Now the system restore should products

  After the laptop has been set to factory settings, check to see if there is an update of firmware for this CURIOUS (CD/DVD drive). If yes-> update the firmware.
  I know you tried three different brands of DVD but you should always try to create a recovery disk using another DVD disc I m using TDK DVD-R and had good experience with it. One of my friends uses Verbatim DVD-R and never had problems

• My new laptop has crashed and disk backup does not work, can download a boot disk for Windows 7, I hit legitimate?

  My Acer 5745 laptop crashed, my backup boot drive does not work. The laptop was running Windows 7 when I bought new in November 2010. Y at - it somewhere that I can download a floppy or a recovery disc?  'The Source' store where I bought will not help, they said they had to go back to Acer and it could take up to two months to return to a charge of about $170.

  Thanks for any help, someone might be able to give.

  A laptop bought at that date will still be under warranty, there should be no costs involved, contact Acer technical support.

  I guess by the backup startup disk, you mean the set of recovery disks you did when you first used the PC?

• Disk cache does not

  I use the add-on for the status of the Cache and noticed last week that the disk cache half of it shows 'not yet loaded. At first I thought that the problem was with the add-on, I even uninstalled and re-installed, but still got the same message. Then I realize that the error was because the disk cache is not active somehow.

  The upgrade to 11.0 FF last week, I made no changes to my configuration or installed any new Add-ons in weeks. I have a few additional modules related to the cache that I installed because I noticed this problem, in fact to diagnose this problem. All in their own way reiterates that the disk cache does not work.

  The page about: cache? device = disk is completely blank in my browser. The purpose: cache page only displays the information of the cache and hide offline (i.e. 0, since I have it is off).

  I added a "Cache" folder in my profile, and he has not made a difference.

  No, I did not order my disk cache folder to a different location on my hard drive.

  No, I'm not in navigation mode private unless there is a way to get in without my knowledge. With the menu editor I removed options incognito in my menus for a long time, since I never use it. He has also not checked in Options - Advanced - Privacy.

  Yes, I have checked all the cache-related on: configuration settings. Everything is as it should be activated and assigned to a certain size of the disk cache.

  How can I get this working again? It's a bit missing folder manually add to my profile, and if so, what is the path?

  This behavior is a feature, not a bug. When the "clear history of firefox closing" setting is selected, the option to clear the cache too, the disk cache is completely disabled. See https://bugzilla.mozilla.org/show_bug.cgi?id=709262 for more information.

  It took me a while to understand this one.

• Recovery Media Creator does not work.

  My recovery media creator does not work. Its shows that 'no disk HARD recovery area '.
  What to do to achieve a recovery of HARD drive space?

  The message on the screen says: no HDD Recovery area

  This means that the recovery media creator software is unable to find image files stored on the HARD drive recovery partition.
  Why?
  There are different reasons for this...

  One of the reasons could be the missing HARD drive recovery partition or files (image files) have been deleted...