Payroll run end application with error

Similar Questions

• Run the application with the admin rights

  Hello

  I am a network administrator and I have problems with an external application. While running the application does not require local administrator rights, the software does an automatic updates check when it is launched. There are updates once a week. If the application is launched without administrator rights, the software does not check. Our users do not have local administrator rights. The result is that the application gets overwhelmed and an administrator needs to log in order to to refresh.

  Here are the solutions I've tried so far:

  1. I ran the application using the command runas , which works, but is not practical as an administrator will have to provide the password every time.

  2. change the compatibility of the application to 'RUN as administrator'. I have disabled UAC to make this work, but the user must always supply a password. I could create a locked user who cannot log on to any machine, etc, etc, but this seems like a stupid solution. I might as well give all admin rights.

  3 to research more, I tried to use RunAsSpc (http://www.robotronic.de/runasspcEn.html). This seems to work well and did exactly what I'm looking for, but created two issues: no drives mapped and an access violation when printing that I won't have to worry about troubleshooting.

  I had to give all users local administrator rights until I have a solution. Is it possible to allow the application to do its updates without granting full administrator rights to the entire system? Any recommendations?

  Yes, let the program provider to build their program cleverly.  It is not going to be a solution to this.

  Otherwise, you will need to just have someone who has admin rights not login once a week and install the necessary updates.  A bit like Microsoft Office Update (requires an administrator to do so).

• When I tried to run my Application with "Launch Android BlackBerry" on Bb 10.2 Simulator error: ERROR: code net.rim.ajde = 4 connecting 192.168.48.130 to BAD failed! NULL children = [status ERROR: code = 0 net.rim.ajde]

  ERROR: code net.rim.ajde = 4 connecting 192.168.48.130 to BAD failed! NULL children = [Status ERROR: net.rim.ajde]

   

   

  code 0 = Please check if the Android player was totally started when you got this error. Otherwise, you can either

   

  increase the time-out of the launch of reader Android on BlackBerry-> BlackBerry Android Development Tools

   

  page preferably or wait until the Android player is completely started and try again. NULL.]

   

   

  Please guide me how to solve this question where can I find

   

  BlackBerry-BlackBerry Android Development Tools >

  Please guide me with the Exact path

  Thank you

  OK, I have one installed and installed a new freshly.

  Solved my problem. Please answer my query to the other

  on the loading BAR file on BlackBerry Q5 Please.

  http://supportforums.BlackBerry.com/T5/Android-runtime-development/how-to-load-a-signed-bar-on-the-R...

• This computer is not running windows genuine with error HrOffline: 0x8004FE21.

  Original title: this computer is not running genuine windows...

  So, I had this PC for about 3 years now, and even more. Since this computer was bought so long ago and not even by me, but my mother, I don't know where all the CD or have papers for it. However, I know for a fact that this computer IS running Windows. I've never had this problem before. It started to appear about 4 days ago. I read everywhere and I'm not entirely sure what I need to do about it because it seems that there are many different solutions to this problem. The only new thing I added to this computer was wifi. I added a TP-Link 450 Mbps Wireless-N dual band PCI Express Adapter. TL-WDN4800 model number. I had to open the computer, put it in and install the stuff that goes with it. I did about a week or two before this message starts to appear. I don't know if this could be the reason for the message «this computer is not running genuine windows...» "is displayed.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - 73CQT - WMF7J-3Q6C9
  Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
  Windows product ID: 00359-OEM-8992687-00010
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {902D3DE7-22CC-4313-B67B-77E9F5BD0FA8} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_gdr.130318 - 1532
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100

  Other data-->
  Office details: {902D3DE7-22CC-4313-B67B-77E9F5BD0FA8}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-4003750831-1906939945-749706782Hewlett-Packardp6715fAmerican Megatrends Inc.. 6.14 20101105000000.000000 + 00008B93607018400FC04090409Time(GMT-05:00) Standard is03HPQOEMSLIC-CPC109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800010-02-1033-7600.0000-2052009
  Installation ID: 014663125430160295483655688094396604208084972533908496
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 3Q6C9
  License status: licensed
  Remaining Windows rearm count: 2
  Time to trust: 23/08/2014-20:04:05

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 8:22:2014 23:29
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: LgAAAAEAAAABAAEAAQACAAAAAgABAAEAliuq8PB1jt4qFsQxAkwvAyys7DZcXQ ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-CPC
  FACP SLIC-CPC HPQOEM
  HPET SLIC-CPC HPQOEM
  MCFG SLIC-CPC HPQOEM
  SLIC SLIC-CPC HPQOEM
  LASRYVITRAGE HPQOEM SLIC-CPC
  SSDT HPQOEM SLIC-CPC
  GSCI HPQOEM SLIC-CPC
  SSDT HPQOEM SLIC-CPC

  Try the solutions in the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/after-running-happily-for-a-couple-of-years-IM-now/fa800e6c-E405-46E8-8c1A-9c59629df404

• Problems downloading applications with error 0x800706ba.

  Whenever I try to download an application, I get the error 0x800706ba. So far, I have not been able to download apps.

  Original title: problem downloading apps

  Hi Mary,

  We can refer to this article and check if that helps.

  What to do if you have problems with a soft: http://windows.microsoft.com/en-in/windows-8/what-troubleshoot-problems-app

  Thank you.

• Inability to run the application in the new DEv OS ALPHA BETA 3

  Hello, I have problems when I run my application with the new BETA 3 version. Change the construcion R6 R9 errors. Built the application trying to run it on my device but DEV ALPHA, install the application and I starts to open it but then it closes.

  In the console, I see this error:

  PVR: (warning): initContext: ignore the type of buffer CBUF_TYPE_PDS_VERT_SECONDARY_PREGEN_BUFFER [778 / eglglue.c]

  And the "bar - descriptor.xml" if poster 'element 'action' is deprecated. Use the permission instead " "

  

  Who can help me?

  Thank you!

  I had the same problem with my app Beta 2 when I upgraded to Beta 3. The problem was with some tags QML are removed the new SDK. The new beta 3, no console shows like not connect from the device in the IDE so, essentially, you can't tell where the QML breaks.

  You can ssh to the device from the IDE using the instructions found this thread:

  http://supportforums.BlackBerry.com/T5/Cascades-development/unresolved-symbol-errors-when-attempting...

  and then you will be able to see what QML tag moves to the top of the application and correct if all goes well.

  I hope this helps.

• Error when you try to run an application that worked when built with 8.6

  I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6.  Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009.  The error relates to the Mean.vi.  He claims that he can't find it.  The error I get is as follows:

  Error loading VI 'NI_AALBase.lvlib:Mean.vi '.  LabVIEW support 3 error code: could not load façade.  I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code.  Please answer as soon as possible because it will quickly start to the impact of my calendar.  Thank you.

  Hello!

  The same problem ?

  I talked with my local OR technical support team. The application now works without any problem.

  Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.

  Best regards.

• Installation of El Capitan problem: "an error occurred during the preparation of the installation. Try running the application again. »

  I've been a fight 2 days now trying to improve my iMac 21.5 2009 end of Mavericks in El Capitan, but as the installation is about to be launched I get this message "an error occurred during the preparation of the installation. Try running the application again".

  Here is a list of all the things I've tried:

  Running the application again;

  Move the installation to another folder application;

  Control date & time and it was already correct;

  Do the installation in safe mode;

  Installation of the upgrade of another user I created only for that purpose;

  The computer restarts and I tried install the upgrade several times;

  And, to be sure that the installation application was not corrupted I made a copy of it on an external HD and tried to install it on my 2011 MacBook Air and it worked (I didn't install because I have El Capitan installed on my MacBook).

  Well, I don't know what else can be done, and I'd rather not have to completely restore my iMac.

  Please try installing again after taking each of these steps you have already taken it.

  Step 1

  Reset the PRAM from your computer.

  Step 2

  If possible, set the clock system as indicated here. If you can only boot into recovery mode, see below.

  In the OS X Utilities screen, select get online help. Safari will launch. While in recovery, you will have no access to your bookmarks or history. Load this web page.

  Triple-click anywhere in the line below to select:

  date 0801000014

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Quit Safari. You go back to the OS X Utilities screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. Paste in the window by pressing the command-V key combination.

  Wait for a new line ending with a dollar sign ($) below what you entered. If it does not appear, press return.

  Quit the Terminal to return to the main screen.

  Step 3

  If your model has replaceable memory by the user and you have upgraded modules of memory, reinstall the original memory and see if there is any improvement. Make sure not to touch the Gold contacts. Clean them with a mild solvent such as rubbing alcohol. Spare memory must exactly match the technical specifications of the machine. Do not install more memory to the maximum value specified, even if a seller of RAM, or someone else, said you that it will work.

  Step 4

  Back up the data at least two different storage devices, if you haven't done so already. A backup is not enough to be sure. Backups are possible with Time Machine or disk utility. Preferably both.

  Erase and install OS X. This operation will destroy all the data on the boot volume, if you be better be sure backups.

• STOP: c000021a {fatal system error} the initial session process or system ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c). The system has been shut down

  I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.

  I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.
  What about Otto
  Windows vista Home basic

  Hello

  Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  =========

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  
  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
  repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
  discs of the machine system good cheap that you already own windows (you will need to reinstall
  If necessary). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• ' In the Application Server error ' / ' "error running FAMILY TREE MAKER 2011

  I used my Family Tree Maker 2011 then Microsoft packages update, now I can't access the Internet through Family Tree Maker 2011.

  I get a Run Time Error with explanations, however, I can't find the files they show:

  In the Application Server error ' / '. Runtime error Description: An application error occurred on the server. The current settings of error customized for this application prevent the details of the error in the application being viewed remotely (for security reasons). It could, however, be read by browsers running on the local server computer.

  Details: To enable the details of this error message specific either visible on remote machines, please create a tag in a "web.config" configuration file located in the root directory of the current web application. This tag should have its attribute of 'mode' on 'Off '.

  Notes: The current error page you see may be replaced by a custom error page by modifying the "defaultRedirect" of an application attribute tag configuration to point to a custom error page URL.

  Before I had a chance to dig into these files, Ancestry.com has sent me a saying Email "they were aware of the error message" and that they were working on the problem. Later in the day, I tried the program again and it worked OK  Owes posed a problem at their end.

  Thanks for the quick response.

• Problems with DAQmx - tasks missing when I run my application on another PC

  Hello

  I use a NI USB 6009 and my program use DAQmx and different tasks for the input and output signal.

  I created an application and I want to run this application on another PC, which doesn't have the development environment, but the runtime engine and installed MAX. This PC is connected to the NI USB 6009.

  Now, I have the problem that the tasks are missing on this PC and I get errors when I run the application.

  I wonder why these tasks are not put into the application automatically? What should I do now? Can I somehow export tasks in MAX and copy them to the other PC? Is not complicate it?

  Hi Johannes,

  Have you created your tasks of measurement and Automation Explorer?

  If this is the case, you must export the file of configuration of measurement and Automation Explorer and then import it on the other computer.

  With LabVIEW 2010, you can import a configuration via your Installer file, but I don't know if you can do it with LabVIEW 7.1

  Kind regards

• Error 'System restore running system' starts with a black cursor screen while trying to use the system restore

  Original title: unit hanging in the middle of the restoration of the system

  Message "System restore running system" starts with a black screen with cursor, but does not move forward.  Windows Vista question

  Have you tried F8 solutions and when I select the system restore it gives me the message above and goes to the black screen even ugly.

  How did I break the loop so I can start a new system restore?

  Hello

  Are you trying to restore your computer or you try to create a restore point?

  Step 1 or 2 can help you to restore your computer.

  Step 1: Try the steps in the section below, if you haven't tried it.

  Start the restore of the system from a command prompt
  http://Windows.Microsoft.com/en-us/Windows-Vista/Start-System-Restore-from-a-command-prompt

  Step 2: Try restoring the system from the recovery console.
  Reference: http://windows.microsoft.com/en-US/windows-vista/What-are-the-system-recovery-options-in-Windows-Vista

  Step 3: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/system-restore-wizard-is-already-running/c797baf7-c069-4e3a-894a-e9644cc6df0b

• Error launching application with Service Ad

  Hello

  I'm integrating the ad to my application service.

  Right now, I have more documentation to create app demo for it.

  I get "java.lang.NoClassDef Error Found" as soon as I run my application.

  Here is the code I use:

  package mypackage;
  
  import net.rim.device.api.ui.UiApplication;
  
  /**
   * This class extends the UiApplication class, providing a
   * graphical user interface.
   */
  public class MyApp extends UiApplication
  {
      /**
       * Entry point for application
       * @param args Command line arguments (not used)
       */
      public static void main(String[] args)
      {
          // Create a new instance of the application and make the currently
          // running thread the application's event dispatch thread.
          MyApp theApp = new MyApp();
          theApp.enterEventDispatcher();
      }
  
      /**
       * Creates a new MyApp object
       */
      public MyApp()
      {
          // Push a screen onto the UI stack for rendering.
          pushScreen(new MyScreen());
      }
  }
  

  See also this warning

  C:\Eclipse_BB\ads\For_Post6.0.0\net_rim_bbapi_adv_app.jar(net_rim_bbapi_adv_app-1. COD): WARNING! : import a file is marked not analyzable
  net.rimlib.blackberry.api.advertising.app.Banner: WARNING! : not found definition

  What I'm missing here?

  I build my application using OS 6.0

  I tried to run the app on 9800 Simulator as well as on the OS 7.0 device 9860

  For both I get the same error.

  How to test the sample application on the Simulator and the device?

  I posted same post here as well

  http://supportforums.BlackBerry.com/T5/BlackBerry-advertising-service/error-launching-app-with-ad-se...

  But I think that it is a nuisance java.

  Thank you

  Afonso Tyagi

  Its market not now

  I lacked control and export the jar file

• All applications, works fine, then suddenly complete with error

  I get all the reports with errors until I restart the OracleFormsServer-Forms60NEWPROD and all works fine then after submitting again.

  And what happening everyday twice or more.

  And during this time all users could not connect to the app.

  Any suggestion.

  I tried

  APP-FND-1630 error for simultaneous applications accessing the database. (Doc ID 554377.1()

  but it did not help.

  We are the

  RDBMS: 9.2.0.8.0

  Oracle Applications: 11.5.10.2

  Can I 2003 Server R2

  
  

  Now the problem is solved

  By increasing the size of the Windows non-interactive process heap.

  After that I found

  Event type: WARNING

  Event source: Win32k

  Description: A desktop heap allocation failed

  on windows 2003 event viewer.

  Please see

  "Not enough memory" error message appears when you have a large number of programs running

  http://Pitss.com/us/2012/10/08/frm-93552-and-Windows-error-a-desktop-heap-allocation-failed/

• Purge the concurrent request and/or Manager Data - take long &amp; end with error completed

  Purge the concurrent request and/or Manager Data - take long & end with error completed.

  What ever the age values 30,70,1000

  ****

  Select count (*) in the FND_CONCURRENT_PROCESSES;

  COUNT (*)

  -----

  32149

  ****

  Select count (*) from the FND_CONCURRENT_REQUESTS;

  COUNT (*)

  -----

  585499

  ****

  Request of min | Application of Max date | Date

  -------------------- --------------------

  SEPT. 13.-10 10 OCTOBER 13

  My problem is now solved

  the cause of the problem was:

  After the clone for the new Production Server FND_CONCURRENT_PROCESSES & FND_CONCURRENT_REQUESTS table 'old' lines were still talking to the node that is no longer available in the new production to LOGFILE_NAME and OUTFILE_NAME columns.

  And after the removal of these lines, executes the request was very quick and works as it should work now.

  Thanks for all the help I get here and with the SR team too