PCI input device driver not installed

Similar Questions

• Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

  I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

  When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

  I have laptop Lenovo, which has something like that for bluetooth

  Broadcom Bluetooth 4.0 USB

  Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

  In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

  But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

  Please help me. Please give me link if there is no download needed

  Original title: bluetooth

  Hi Roger,

  You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

  Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

  Please come back if you face problems related to Windows and we will be happy to help you.

• Windows XP "Apple Mobile Device Driver not installed not" device need driver mobile HELP running XP service pack 3 using an iphone 4

  Problems with the iphone 4 who it says in itunes that "Apple Mobile Device Driver not found" and nothing happens when it is connected to the USB port on charge even not. Running Windows XP 32-bit with Service Pack 3. but think I deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers. Apple went through just fine and everything is OK it is a problem of PC and XP. Microsoft help put me on this site because need to know how to solve this problem I hope that somewhere there are mobile device drivers that work with the iphone? Site Internet de Microsft has 5 mobile device for Windows 7 drivers, but not for XP. Need help!

  Apple went through just fine and everything is OK it is a problem of PC and XP.

  Evasive classic.  It's always the problem of the other guy.

  And the classic response of some evil-educated person "technical support":

  Microsoft help put me on this site

  If the error message says 'Mobile Apple Device not found Driver' then it's an Apple problem, pure and simple.  The device driver mobile for the iPhone comes from Apple, not Microsoft.

  Do you remember what you were doing when you "deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers?"

  Probably not... and you have not explained what has been included in "Apple went through everything."  It is time to start over by removing everything related to Apple and then put it back correctly.

  First, however, the fact that the iPhone does not load even when connected to a USB port is a bit worrying.  Works in everything else in this USB port (for example, a USB flash drive)?

  Have you tried all the USB ports on your computer?  Take a look in the Device Manager (start > run > devmgmt.msc > OK) and see if there are any icons showing warning.  If so, double-click on the entry and information "device status".

  Take a look at the event viewer (start > run > eventvwr > OK).  There is no need to go far.  Connect your iPhone, then look at the newspapers (System and Application) for since a few minutes see if there are any errors or warnings.  If so, double-click on it to get the event properties window, and then click the "Copy" icon (just below of the)

  Have you tried to recharge the iPhone using the adapter connected to Apple's USB cable?  Does it work?

  Have you tried to connect the iPhone to another computer?  With what results?

  Assuming that the hardware (iPhone, USB cable, and USB ports on your computer) is not working properly, see the following topics.

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.

  Warning: uninstall utility for cleaning Windows mentioned in the instructions below has been removed from Microsoft download servers because sometimes it seems more removed he was supposed to (I think that this phenomenon was linked to the bureau uninstalls).  You can still get utility Windows Installer Cleanup--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html here is a free alternative Revo Uninstaller. Before using these cleaning products, you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  Go to control panel > Add/Remove programs
  Remove these applications:
  1 Apple Software Update
  2. Apple Mobile Device Support
  3 Hello
  4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
  5 iTunes
  6 QuickTime

  Open my computer > C: > Program Files
  Delete this files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  Download & install the Windows Installer Cleanup utility: [see note above regarding cleanup utility]
  http://support.Microsoft.com/kb/290301/
  Launch the utility: start > programs > Windows Installer Clean Up
  Select one of the applications mentioned above and click on remove

  Restart the computer
  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

• Satellite C50-C023 - Win 8.1 PCI Device driver not installed

  Hi This is my 1st post here

  My friend bought the satellite above with 10 Windows pre installed on it. accounting software, it should run on it is not compatible with win 10.

  He asked me to help downgrade to win 8.1. I called and they said yes everything will work, but Toshiba is no guarantee nor provide a decommissioning. That is to say, do so at your own risk.

  So he decided to go forward and we bought 8.1 and I installed it. now, everything is ok except for 1 PCI device display as not installed in Device Manager. Any help in this matter would be greatly appreciated. It's one thing to chipset?

  Kind regards

  John

  Hello

  Recently, I helped a friend the low-grade sound C50-C023 to win 10 to 8.1 Win.

  Everything went well except that now, I in Device Manager my PCI device not installed and no updates can be found anywhere. I have just completed do all Win 8.1 updates but still have this problem

  Any help would be greatly appreciated.

  Kind regards
  John

• MTB usb device drive not installed correctly

  Original title: mtb device usb driver does not not propely? What id o to fix?

  I have iphone 4S... when I connect my Iphone with my pc, iTunes connect with my iphone but pc do not connect with my phone and shows mtb reader usb device not installed correctly. How I solve this problem?

  Hi Isabelle,.

  I suggest you try the steps from the following link:

  iTunes: iTunes Store advanced troubleshooting
  http://support.Apple.com/kb/ts3297

  Hope this helps! Let us know if you have problems with Windows in the future.

• PCI device driver not installed

  Hi all

  I have recently installed Windows 8 64-bit on my laptop (pavilion g6-2009sm). All the drivers were properly installed and functional except the PCI device, which is listed under 'other devices '.

  Here's hardvare ID's of the device:

  PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  Can someone please tell me what driver should I install to solve this problem?

  Hello

  The missing pilot is one of your SD card reader.

  Please find the Win8 x 64 driver here:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58518.exe

  Concerning

• HP Pavilion dv9894ca: Base system device driver not installed

  I need the drivers for base system devices that have not been correctly installed after I've upgraded to windows 8.1. He originally had Vista on it.

  

  

  Hello:

  You need this driver...

  This package contains the driver for the Ricoh 5-in-1 card reader for laptops models and operating systems.

  File name: sp37726.exe

• WSD Print device is not installed driver

  I try to print on my Brother MFC 9970 and when I trouble shoot, I get a "WSD print device driver not installed. Well, I know that, because I've uninstalled it after several times trying to update due to the previous error it not updated. Now, I have no idea how do to download the driver and cannot find a driver to download to a Microsoft website that actually works. Help, please?

  Hello

  This happens for your model of printer you have given us: MFC-9970CDW NO result found at Brother for MFC 9970.

  Go to the website of brothers.

  Uninstall/reinstall your printer using the latest drivers from here your operating system.

  http://support.brother.com/g/b/downloadtop.aspx?c=us_ot&lang=en&prod=mfc9970cdw_all

  Most of the manufacturer will also have troubleshooting steps for you to take registered there, too.

  This can also help you:

  "Solve printer problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  "Solve printer problems.

  In the upper right corner, select your operating system from the menu drop-down.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• Black screen - try to activate the controller PCI of communication Simple: the drivers for this device are not installed. (Code 28)

  Original title: Safe Mode

  Can run my computer only in Safe Mode, whenever I try to boot into normal mode I get a screen with lines on the subject. Cannot download even the peak "white screen" now.

  Any help will be greatly appreciated. Thank you.

  New: I get his message when trying to activate the controller PCI of communication Simple:

  "Windows has enabled this device, however, this device still does not work correctly."

  Then:

  The drivers for this device are not installed. (Code 28)

  To reinstall the drivers for this device, click on reinstall.

  Then:

  "Windows cannot find the driver for your device".

  Get you the drivers accessing a site Web on your computer or the manufacturer of the graphics card > Search a drivers and download article > search your computer or your graphics card model number > your operating system > drivers for it: either video / graphic / Chipset (according to the label)

  See you soon.

• Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

  Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

  I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

  There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

  • Remove or reconfigure newly installed unit.
  • Restore the version before your driver update.
  • Use system restore to undo recent changes in Device Manager.

  Step 1: Roll back the driver to the version before your update.

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

  http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

  I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

   

   

  Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

  Thank you.

• Impossible to install the mouse, the drivers for this device are not installed. (Code 28) Access is denied. To find a driver for this device, click Update driver.

  Hello

  I recently bought a windows mouse (Microsoft wireless mobile mouse 1000). When the connection of the transceiver nano in my computer it is unable to install the driver.

  I tried many fixes but none work, I downloaded the driver from the website driver Microsoft but the mouse still does not work.

  When you install the driver he always says "the drivers for this device are not installed. (Code 28) Access is denied. To find a driver for this device, click Update driver. »

  Why would access denied?

  Any help would be great.

  I am running Windows 7 Home Premium

  See you soon

  Robert

  Hi Robert,.

  You receive this error during the installation of other USB devices?

  Usually this kind of error messages happen when we are not connected as an administrator.

  You can read the following article and check if that helps.

  Code 28: The drivers for this device are not installed

  Please return to the State of the question.

• Error code 28 'the drivers for this device are not installed' for Seagate ST905004EXA101 - RK 500 GB hard drive.

  Original title: Windows7 does not recognise seagate expansion drive.

  Expansion drive model: ST905004EXA101 - RK Seagate 500 GB

  Microsoft Windows 7 website says that it is supported.

  The drive works in another laptop with Windows XP.

  Try installing in another laptop with Windows 7 Enterprise SP1.

  In Device Manager, I get a message "the drivers for this device are not installed. (Code 28) »

  Hi PinakiDeb,

  You can follow this link & check if the problem persists.

  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201235&NewLang=en.------

  Hope the helps of information.
  Please post back and we do know.

• Satellite Pro L300 - 'problem adapter - driver not installed.

  I replaced Vista with XP. Almost everything well except that I get this problem adapter - driver not installed message"whenever I connect. I have been on the download from Toshiba site and almost everything has been installed to the L300. Not very techinical so I would be grateful for simple answers.

  If you can help I would be very grateful.

  I went to Accessories - system information and here is the result:
  Connection TV/video Microsoft name [00000001]
  Card type not available
  Connection TV/video Microsoft product Type
  Installed Yes
  PNP ID of device not available
  Last reset 10/05/2012 07:09
  Index 1
  Service name NdisIP
  IP address not available
  IP subnet not available
  Default IP gateway not available
  Active Yes DHCP
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available

  Name [00000002] RAS Async adapter
  Card type not available
  Card product Type RAS Async
  Installed Yes
  PNP ID of device not available
  Last reset 10/05/2012 07:09
  Index 2
  Service name AsyncMac
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available

  Name [00000003] Wan WAN (L2TP) Miniport
  Card type not available
  Product type Wan (L2TP) WAN Miniport
  Installed Yes
  ROOT\MS_L2TPMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 3
  Service name Rasl2tp
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\rasl2tp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 50,13 KB (51 328 bytes), 04/08/2004-20:00)

  Name [00000004] Wan WAN (PPTP) Miniport
  Adapter Type wide area network (WAN)
  Product type Miniport Wan WAN (PPTP)
  Installed Yes
  ROOT\MS_PPTPMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 4
  Service name PptpMiniport
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 50:50:54:50:30:30
  Driver c:\windows\system32\drivers\raspptp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 47.25 KB (48 384 bytes), 04/08/2004-20:00)

  Name [00000005] WAN (PPPOE) Miniport
  Adapter Type wide area network (WAN)
  Product type WAN (PPPOE) Miniport
  Installed Yes
  ROOT\MS_PPPOEMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 5
  Service name RasPppoe
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 33:50:6F:45:30:30
  Driver c:\windows\system32\drivers\raspppoe.sys (5.1.2600.5512 (xpsp.080413 - 0852), 40,50 KB (41 472 bytes), 04/08/2004-20:00)

  Name [00000006] Direct parallel
  Card type not available
  Product Type Direct parallel
  Installed Yes
  ROOT\MS_PTIMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 6
  Service name Raspti
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\raspti.sys (5.1.2600.0 (xpclient.010817 - 1148), 16,13 KB (16 512 bytes), 04/08/2004-20:00)

  Name [00000007] Wan (IP) Miniport
  Card type not available
  Type of product (IP) WAN Miniport
  Installed Yes
  ROOT\MS_NDISWANIP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 7
  Service name NdisWan
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\ndiswan.sys (5.1.2600.5512 (xpsp.080413 - 0852), 89,38 KB (91 520 bytes), 04/08/2004-20:00)

  Name [00000008] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  8 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address A4:3E:20:52:41:53
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000009] Realtek PCIe FE Family Controller
  Adapter Type Ethernet 802.3
  Product Type Realtek PCIe FE Family Controller
  Installed Yes
  PNP ID of device PCI\VEN_10EC & DEV_8136 & SUBSYS_FF641179 & REV_02\4 & 23F 5EDAD & 0 & 00E0
  Last reset 10/05/2012 07:09
  Index 9
  RTLE8023xp service name
  The 0.0.0.0 IP address
  IP subnet
  Default IP gateway not available
  Active Yes DHCP
  255.255.255.255 DHCP server
  DHCP lease expires 21/03/2012 13:23
  DHCP lease obtained 21/03/2012 12:23
  MAC address 00:1E:33:3F:0 D: 3RD
  IO port 0 x 00003000-0x00004FFF
  0xD0010000-0xD0010FFF memory address
  0xD0000000-0xD10FFFFF memory address
  IRQ channel, IRQ 16
  Driver c:\windows\system32\drivers\rtenicxp.sys (5.764.0702.2010 built by: WinDDK, Ko 228,90 (234 392 bytes), 21/03/2012 12:23)

  Name [00000010] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0001 PNP device ID
  Last reset 10/05/2012 07:09
  Index 10
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 00:1E:33:3F:0 D: 3RD
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000011] wireless intermediate driver
  Adapter Type Ethernet 802.3
  Product Type Wireless intermediate driver
  Installed Yes
  ROOT\WSIMDMP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  11 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\wsimd.sys (1.0.0.83, 56,06 KB (57 408 bytes), 12/04/2012 23:25)

  Name [00000012] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0002 PNP device ID
  Last reset 10/05/2012 07:09
  12 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000016] Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Adapter Type Ethernet 802.3
  Product Type Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Installed Yes
  USB\VID_0BDA & PID_8198\00E04C000001 PNP device ID
  Last reset 10/05/2012 07:09
  Index 16
  Service name RTL8187B
  10.1.1.4 IP address
  255.0.0.0 subnet IP
  Gateway IP 10.1.1.1
  Active Yes DHCP
  10.1.1.1 DHCP server
  DHCP lease expires on 10/05/2012 08:10
  DHCP lease obtained 10/05/2012 07:10
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\rtl8187b.sys (5.1116.1226.2007 built by: WinDDK, 281.25 KB (288 000 bytes), 29/03/2012 09:41)

  Thank you!!!

  Can you please open device manager and check if this is some unknown device listed?

  By the way: see also http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

• Coprocessor - driver not installed

  Recently, my portable hard drive crashed and I decided to install the 64-bit version of Windows 7 on the new drive.

  After completing the installation and update of the system with Windows Update several times, does not have the coprocessor driver. HP does not support drivers for my laptop on Windows 7 OS.

  My laptop is a Pavilion dv6913rs (AMD turion 64 x 2 and Nvidia GeForce Go 7150 M). The purpose of the analytical device is:

  • Manufacturer: unknown
  • Location: Bus PCI 0, device 1, function 3
  • Status: The drivers for this device are not installed (Code 28).

  Thanks for your help.

  Here is the driver for it... ftp://ftp.HP.com/pub/SoftPaq/sp37501-38000/sp37730.exe

• Laptop HP 250 G2: the drivers for this device are not installed. F0Z43EA (code 28) - #ABT

  Hello

  I get this error:

  The drivers for this device are not installed. (Code 28)

  model: HP 250 G2 Notebook PC

  Model number: F0Z43EA #ABT

  PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  How I solve the problem?

  thnx

  Hello:

  You need this driver for the card reader:

  Download and install the driver first on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false