Personalized product

Similar Questions

• Error blue screen of Windows 8

  Hello, I have a few problems with Windows... First I hade error 0cx000000f, which I was unable to start windows, and which I have fixed formatting my computer and reinstall windows (in fact, I installed a downloadable version of windows which I activated with my personal product key). It seemed made for the first time, but then I restarted computer and I got another blue screen, the "UNMOUNTABLE_BOOT_VOLUME"... I tried hard to solve this problem, but the onl thing I can once again formatted my pc and reinstall Windows 8, but when I restart error comes back. When the error affects PC I can not even boot Windows 8 DVD... Please someone help me...

  Hey! It seems that I fixed that! Now, I'm writing about it so if somone had the same problem can try to repair it this way. It seems that I was right to think that BIOS and operating system are not compatible...

  To fix the error, I followed these steps:

  1. I went to the BIOS and secure boot disabled to enable legacy support... (F10 > System Configuration > start... Options)

  2. I used a bootable, Gparted software, which actually start by pressing F9, then DVD internal, I formatted all my volumes of HARD drive, then I deleted all the volumes to have just a left volume...

  3. I used the DVD of Windows 8.1 to run "Recovery" and then used prompt to convert my GPT HARD drive - recovery > Troubleshoot > advanced > guest > diskpart (then write the commands following..) > select 'your own number volume' volume > clean > convert GPT... (the mistake that I did before, it's that I tried to install win 8 which can be installed on a HDD MBR but needs a HDD GPT to will work perfectly, and I was caught in the MBR format before somehow)

  4. I installed Windows 8.1 (from DVD) and the drivers in my PC and it seems now work very well, even if I am still unable to use start secure even if UEFI is installed, but that's okay as long as it...

  At least the error was the uncompatibility between the operating system (win 8) and the wrong format of drive (MBR) that I used to install Windows 8, system that was obviously too old for the version of BIOS and the BIOS (version 25) last...

• Need to re - format the hard drive of the constant problems marketing and stay operating in car

  Product: HP Pavilion Media Center M8200n

  Product # GN551AA #ABA

  Serial No. [edited personal product info]

  Operating system: XP upgraded to Windows 7

  Several months ago, I started getting blue screens and freezes and then start at the beginning, etc.. I finally got in a single day and immediately backed up everything on my remote hard drive. I think it would be better to re - format the hard drive and start over. Something keeps sending me blue screens and freeze me. Please help... an elderly person who is not completely computer illiterate, but not so tech savvy!

  W. b. Smith

  CONGRATULATIONS TO DAVE860... ALL THIS IS THANKS TO YOU!

  I remember you said something about Norton does not fully with upgrades. So I removed Norton System and replaced with Security Essentials and all worked fine for 4 weeks now underway.

  Your help so greatly appreciated. Ironically, according to my friends, they have been seen ice problems and I told her about Norton and upgrade system I have. Seems that they had upgraded from Vista to XP. They have deleted Norton and installed another security system and all is well.

  New big giant Bravo to you, Dave.

  Thank you.

• Links 'Ghost' objects raster in Illustrator file?

  An editor asked me to replace the low-resolution raster elements in my Kit. This is the file created entirely from vector objects in Illustrator and no raster object were used.

  The file is massively complex with hundreds of items, and it is impossible to pick through each layer in an attempt to locate the offending items. Although I've never linked objects in this file, there are about 40 items listed in the links Panel. All thumbnails show light elliptical gradients on a black background. information for all is empty (name, location, genre, created, modified are empty, the size is 0 bytes) (see screenshots below). I have re-linked one of them to a PNG image random some vegetables with the hope of then to delete this object, but then could not find vegetables anywhere in the illustration.

  Question 1: Is there a better way for me to locate the supposed raster elements in this file, simply open the links Panel?

  Question 2: Why is there a bunch of links 'Phantom' in the links Panel, no link has ever attempted this file? Could they be somehow leading person production of the editor of believe it rasters into that file?

  Question 3: How these links Ghost is removable? (When you click on "Go to Link", the work plan moves to show a certain corner of the illustration, but there is nothing that I can tell).

  I use:

  Illustrator CS6

  Windows 7 business

  

  

  Emel Tse wrote:

  The Publisher may have saved the file in EPS somewhere along the way. I asked to tell me what, if anything, they did it in the file after my original presentation. It will be still explain why I see 40 links in my original file, however.

  Yes, it will be.

  You had a transparency mask. SPE cannot contain transparency, so we must flatten transparency and process that raster images will appear for your transparency masks.

  Once the content has been converted into rasters there no way to get a higher resolution in it. Instead, you need to increase the resolution before the conversion to the raster. Depending on how these transparency masks were created you need to increase the resolution in the effects of rasterization settings and/or you need to increase the resolution in transparency flattening settings that apply then turn that into rasters is when writing of the EPS.

  So basically, that the editor do not know what they are doing, but they will have to.

• Run different applications in Creative Suites on two computers at the same time.

  I have a backlog of mini tape DV from my vacation for 10 years.  The rear reason is because slow computers have made a personal production until the very slow DVD creation.  I've recently updated to 4-core i7 with unique HDs and on the point of buying a custom built 6 hearts i7 with SSD and RAID HDs.  I understand that I can install Creative Suite Production Premium 5.5 on two computers.  One facility is already on the coreI-4.   I intend to install the second installation on the 6-core.  I would use the 6-core for production, while the 4 - core is the capture of DV cassettes.

  If I had bought a copy of an application separate and installed on separate computers, I'd be able to run them at the same time.  Is there a way I can run two computers at the same time with Creative Suite to accelerate personal production for example can I run separate from the Creative Suite applications, I want to use separate programs, on two computers at the same time, as long as these requests are not the same?

  You can run the same or different adobe products to the same or different times on the same or different computers (except that you can not run the same program more than once on the same computer at the same time).

• How is the content repository differs from the ability to plugin ECM

  How is the content repository differs from the plugin ability suh as Documentum ECM. What are the different use cases. What is the best to use for document management downloads per user for association with personal products/services of the user?

  Content Repository is one based on the standards, all featured reference, included in all editions of the Adobe Digital Enterprise Platform and Solutions. You can use it to store and access content, run the complete set of content as search services, authorization, etc. Therefore, it is ideal for all needs related to document/content/assets of your applications. It offers the JCR API, as well as access via RESTful interface and player network WebDAV (among others). In addition, the content repository content management makes immediately available for all solutions that work platform.

  In essence, repository content is your go - to place to store and manage content in the platform/Digital Business Solutions. It is well suited to meet your use case.

  The Plugins of ECM (connectors) are used if you have existing LiveCycle document services, and you have a ECM systems in your infrastructure used in the form of archive. It then lets you connect to such a system of 3rd - party and recover the document for the treatment, as well as store them back for archiving.

• Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory.

  Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory. What is that?... and how can I solve this problem?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.

  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have visited
  logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Support the contact - person I'm trying to communicate with a person that I paid for my subscription to the CC and it is to show that I have not bought the product.  The page to contact technical support is a labyrinth and continues to loop back to the sa

  I am trying to contact a person that I paid for my subscription to the CC and it is to show that I have not bought the product.  The page contact technical support is a labyrinth and continues to loop back to the same place without giving me any contact information! Help, please!

  Move the debate towards Adobe Creative cloud

  We have checked your account details, we see active participation of Photography Photoshop program.  Please make sure that you are connected with correct Adobe Id to Adobe.com to get it. You can check:Adobe Store | Order FAQ and your online payment

  To install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html, you can also Learn how to enable or disable Adobe applications from here.

  Kindly let us know in case you have further questions on your membership.

  I hope this helps.

• A few years back, I bought CS5. because of my house having to repair my CS5 has been lost in the move. Then I had to take care of my mother who died later of cancer. I have now found my product, but the customer service person said that there is no newspa

  A few years back, I bought CS5. because of my house having to repair my Adobe CS5 has been lost in the move.  Then I had to take care of my mother who died later of cancer.  I have now found my product but the person said the customer service there is no newspaper of me purchase of the product.  I can't use the product that I bought because I don't have the registration code.  So could I please get a refund and I will return the edition teachers and students of CS5.  Thank you.

  @

  Quickly find your serial number

  Download the CS5 products

• I bought Adobe Acrobat 9 year 2009. Due to new hardware, I have once again to installthe programm. 1 or 2 two years the hotline told me that I have a free download. Now, I tried and I found the product described in my personal

  I bought Adobe Acrobat 9 year 2009. Due to new hardware, I have once again to installthe programm. 1 or 2 two years the hotline told me that I have a free download. Now, I tried and I found the product described in my personal account, but it is not possible to download. Then I tried to download that version 9 through the community, but then my product key has not been accepted.  Thanks for any help in advance, Andreas

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I am trying to transfer the license from a Dreamweaver CS3 Macintosh product. A transfer of license form signed by the person who gave it to me. Can someone help me complete the process?

  I am trying to transfer the license from a Dreamweaver CS3 Macintosh product. A transfer of license form signed by the person who gave it to me. Can someone help me complete the process as cat Adobe say they are unable to help? I was told that the forum is reviewed by a team of experts. Anyone here? Thank you

  Did you follow your form as well?  A form must be completed and signed by both parties and submitted to the Adobe support via a support ticket. Chat support can't help, but should you indicated in section with the instructions.

  Transfer an Adobe product license

• How scammers there all of my personal contacts and windows product information?

  Someone at microsoft examines how phone scammers windows tech got our coordinates and windows of the product numbers in the first place?  Also, why are there no results for all the answers community when I press the tab "microsoft Support?

  The scammers had no contact, they all cold canvas, if you follow their instructions, they can look at your computer and will get away with more details of your product in order to check your bank accounts if you let them. They operate in places that have no laws to stop, if you hang up, they can get. It is a free forum, if you would like Microsoft then do a search to contact Microsoft.

• Is it me or HP support only exists for personal hygiene products?

  I posted this a month ago.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Chromebook-14-q004sa-EnableTechnology...

  Also raised a case of pension a few weeks - HP 3000951140 case - but the last response that was 9 days ago. I em phoned yesterday, received assurances that they would get back to me. Nothing so far.

  I have a product that two months ago, including mobile modem didn't work for a month.

  I wonder what's next. Send it back and quote the Sale of Goods Act?

  Hi @DeepDiver22 ,

  Your link does not work, but is this a? I have sent a report to your subject and check your private message when someone HP reaches out for you.

  Best,

  Russ

• Subscription, change, one product to creative, personal education cloud

  I have a commitment of 12 months for Dreamweaver. I received an e-mail on creative cloud for teachers and students at $19.99. My questions:

  • Can I upgrade my subscription to Dreamweaver CC?
  • As a member of the staff ([email protected]) can I get the price of education user?

  Single update for all http://forums.adobe.com/thread/1235382 clouds can help

  Adobe in education... Start here https://creative.adobe.com/join/edu

  Educational https://creative.adobe.com/plans?plan=edu

  One year price Intro http://forums.adobe.com/thread/1448933?tstart=0

  http://www.Adobe.com/products/creativecloud/students.edu.html

  http://www.Adobe.com/education/students/student-eligibility-Guide.edu.html

  Proof of ID http://www.adobe.com/store/au_edu/academic_id.html

• Send a personalized notification of purchase for specific products?

  Hello

  We have a customer who uses Vervante for shipping some of their clothes.  In order to make the automatic order process, we need to have a confirmation email sent to Vervante that contains order information in a specific format.  Is it possible to do it for specific products or in a catalog?

  Thank you

  Jeff

  Oh I may have found a solution.  I didn't know that you can configure Drop Shipping.