Photoshop button stuck in an "active" State in widget presentation
It is perhaps easier to show than to explain, but I'll try my best...
I use a widget from presentation to view videos on my site (www.droptree.com). Subpage of each project has an embedded Vimeo player upstairs that corresponds according to the link you selected. Each button has been created in Photoshop with 4 different States that, until recently, worked perfectly. You click on a link, the status changes to 'active' and you watch your video. When you're done, you click a different button, the States change accordingly and watch you your next video.
Well now what happens is that when you go to the subpage, the top left link is selected by default (and design), but if you choose to watch another video the State of default buttons is not pass off assets. I can only think that there is a problem with Muse CC 2015 because this issue never happened in previous versions. The strange thing is that it is the way through each subpage, so I know that this is not something I have messed up on accident because some of the pages that I have not edited in the month.
I know that this is not a question of State either because when I inspect the button in the "States" window, all States are properly taken into account as it should.
Some examples of screenshot of the problem. If you have any suggestions, I'm all ears.
Trigger is linked to the container and when active the container is started on screen, how composition widget works, but in case you want triggers need to redirect to another page or url, I suggest you to use the buttons of the State for this.
Thank you
Sanjit
Tags: Adobe Muse
Similar Questions
-
Photoshop button in the State of the asset returns to normal after turning over?
Hello
I work on a site of reference glossary in Muse and have hit a roadblock with my buttons in photoshop.
I created the menu buttons in Photoshop that have two different States - an asset and working capital and another for normal and down (the button is actually saved with four layers/States, one for each, but for what the user sees, it's really only two options). I used these menu buttons as triggers of reversal for blank publications, and when the user hovers over the button, the page name will appear below and then disappears in slowing (otherwise the names ecaple and it would look very crowded).
The issue I found is that when I preview the page in my browser, the buttons seem to work properly as they appear in the active state, which indicates that the page they are linked is one they are on.
Initial view - homepage:
.. .and when I reversal of the image of the page that I am currently on, the button displays the name of the desired page, like so:
However, when I have the deployment, the button goes back back to the normal/down state, even if I'm still on the home page.
Here is a screenshot of the composition settings that I set up for this widget. I tried the target 'hide' switching to zero, but as the target refers to the word 'Home', the word 'Home' has remained visible and more button remains in the active state, which is not what I want. I also tried selecting "triggers on Top", but the problem was solved not here either.
What Miss me? How can I make sure that my button remains in the active state when it is on it is linked to the page?
Thanks for your help!
Rachel
Looks like a bug that is the impact of the meaning overloaded state 'active '. 'Active' is the State used for an article with an applied hyperlink that points to the current page (or an anchor point in the current scrolling range on the current page) and the State used for a trigger or a sticker in a widget of Composition or a slide show that matches one element current assets of the composition or the slide show.
It seems that we honor the hyperlink definition of 'Assets' on the loading of the page for a composition trigger with a hyperlink to the applied current page, but not to honor this definition of active when the transition to having no element in the composition active (or when presumable to transition to another element of the composition is active).
The only solution that comes to mind would be the approach very tedious to reproduce this widget of composition on each page, delete the hyperlink on the 'active' trigger and put shaped manually its 'Normal' State for Quicken.
I wrote the bug. However, it cannot be corrected immediately. (We tend to collect small bugs in a box and then answer all at once or when other changes are planned in this area, because of the overhead involved in the ramp up to work on a surface and completely redone the test after changes).
-
How the State 'Active' of my Photoshop Button do appear and stay after a single click?
Happy Valentines Day.
I made a button in photoshop with 4 layers - each of the 4 States of Muse. When I saw my Web page, the Normal, rollover and Mouse Down States display correctly, but I guess I don't understand how to get the status "Active" appear. I want a user to be able to click on the button in photoshop and have this layer 4 (active state) appear and stay until the user clicks on the other hand.
What am I not understanding or missed?
Thank you
Hi Eric
It appears that you want the active State for the rectangle with image fill without any url of the page.
Active state only works when the url of the page will be active, means that the page is active. If you link rectangle to any page and then preview, active State would work when you click on it, because clicking on the object will open the specific link that is associated with rectangle, which makes it active.
It won't work without using any link.
I suggest you to change the picture fill of asset turnover or the mouse down, that could work without linking the object to any page.
For example, I have linked the rectangle to the home page and now active State would result when you will be noticed. Did you send the file.
Thank you
Sanjit
-
change of State of the photoshop button after it is placed
I can't find out how to change the State of a button in photoshop after it is placed in the layout. I know I can set the State of a button as I place, but once it's in it seems to be stuck.
Example: I create a badge in PS with normal, rollover, the mouse down and then active States and place it in my site. Later, I decide I want to active State to even appear in a reversal, but since he's already been placed, I can not change the State.
Anyone had this same problem, and if so have you been able to change States without remove the button and the re - set?
So, it might be better to simply have a button to Muse, in this way, you can change the States. You could also use your PS button and oblige States to be something like a shadow that changes in different States. Just a thought.
-
Size buttons menu custom for active and roll over the State
Hello.
I'm looking to create a navigation menu (simple rectangles with text) in which the role active and several indicate the box will be larger in height.
I wish well for on roll over the button to magnify and others to shrink, then for there great when selected.
In the example below, this is what I want it to look for the apps page.
I'm stuck as the menu widget only allows them to be on only one size. Any ideas how I can achieve this?
Kind regards
Sean
Post edited by: Sean Bird
You can add effects to an active state on the menu which items when in active State will show different from the menu SUP normal items.
Thank you
Sanjit
-
Assigning a page to an active state of a button?
I'm creating a navigation menu and to set a button to be in an active state on a specific page. I know that this can happen automatically with the built-in "menu" widget, but it is limited in terms of design (2 width in empty pixels between buttons).
In short: I know how to set the active state, but how do I assign to triggers page state "active"?Are you a person that is requesting the active state of a menu item / button for another link page to other States of the issue?
The States are just different styles applied to the element CSS, activates the linked page or anchor, they have no control over the HTML code. Technically, what you ask, it is possible but only with JavaScript, which should have be written on order.
You can adjust the spacing between the menu items using the parameters of the gutter in the transformation Panel.
I hope this helps.
David
-
a button does not show the active state
Howdy,
Trying to figure out a problem with one of my menu buttons. Each of them (home, about, the portfolio, services, contact) work very well except for the 'contact' button, which does not show the active state. Just on the active state of 'services '. The web page moves to the contact page, but the button stays highlighted on 'services '. Who is? I prefer not to link until the site is closer to complete but I can if I have to... to help.
Thank you
Curtis
lol, no worries about the ONGOING work! I never judge sites. ;-)
Anyway, if you move the anchor contact about 30 pixels it will work or down a bit of your content from contact page. As you can see in my screenshot if I scroll pretty far from having anchor at the top of the browser window, the button is marked as active.
So play with your location of the anchor a little and it should work perfectly for you.
-
can you put a line autour just the button to active state when you land on this page
I have a site and I use a very subtle color for my active state. Can I put a line autour just the button to active state when you land on this page? I thought it would be useful to highlight the button without killing the color.
Site = www.nelsonatnite.com
Hi Nelson,.
Yes, you can STROKE around the button of the active state. You must select the button, then go to the States, click on 'Active' and add STROKE.
Kind regards
Aish
-
Adobe photoshop button malfunction muse
I created five photoshop buttons that go on each page at synaxis.businesscatalyst.com that worked perfectly until I recently published the site and now the buttons, which I did not any changes, do not work properly. When 5th for contact is click on the button, the fourth button to the Gallery lights instead (he really must go to the site linked to see ive) I checked the .psd file, I used and checked the active State and buttons must be switched on correctly... do not know what is happening!
try to increase the size of your page
-
Bug with the active State and normal state in the composition
Hello
I'm having a problem with the text on a composition between breakpoints. Here's an example: I the composition of new featured and I have a button with a font of 22 and then access a breakpoint and replace the police 16. The problem is that the button keeps the size of the text in the normal state on two breakpoints, but the active status changes to 16 for two breakpoints. I tried to change back the active State to a breakpoint at 22 and the other at 16, but it changes back to the last number used on the last breakpoint. Again, the normal State remains the same. Y at - it something I do or is it a bug?
Hello Cristina,
Please see Re: "Text on current breakpoint" button non-functional
I would also add that the active state inherits the attributes to Normal State, so if you have your normal formatting through the breakpoints set in place as desired (for example, 22px for a breakpoint and 16px for another breakpoint), the active State will, by default, use these settings.
If, however, you're done by explicitly change the active status value so that it ends up enforcement at all breakpoints, you can return the default by pressing the "Reset default" button in the States Panel.
I hope this helps.
Abhishek
-
Photoshop button has a line of pixelated around it?
With the help of Muse, I did photoshop buttons in the past and they shot very well, but it will not work.
For this instagram button, I did, when I scroll over it it appears that border weird pixelated black around it (see below or here: http://imgur.com/1YresDF ).
The other buttons on my page don't this and seems fine (see below or here http://imgur.com/jhPezZj ).
My approach:
Normal state of my button is black and scroll it on the State is white. So why do I get this weird pixelation? I did black icons in illustrator and then brought into photoshop. I am duplicating my black icons, then the tool using magic wand or color range selection I am highlighting the black icon and their white paint. So, I have two layers, one white and one black. I save, go to muse, and then click import Photoshop button. I attribute the normal layer as my black icon and the scroll on my white icon. Then I click OK and adjust the icon in the muse.
What's my bad process? Help, please
The fixed!
For the curious, this time, after that I did my button in illustrator, I exported a PNG. What I had to do was to locate the PNG file in my Finder, right click and "open in photoshop." Once in photoshop, I duplicated the layer, used the magic wand to select the black icon, he painted in white and then saved my project with a layer of white and black.
For some reason, which got rid of the awkward sketch when I brought in Muse.
-
I am trying to create a photoshop button that is not rectangular. This is what im trying to create, where when you scroll every other circle the second State shows.
How can I do this? I tried using a button in Photoshop, but they must be rectangular and circles which blocks other buttons. Is there some kind of way to consolidate a PS button with a text Muse button? Otherwise it would be an INCREDIBLE NOVELTY to have! I meet this problem many times and he would do much better Muse.
You can use the status button where the image can be used with text within the same frame.
Thank you
Sanjit
-
In Active state Muse in permanent
Hello
In Muse, there are 4 States the active state that appears once you clicked on the button, so far won't... .but how to make this state of 'permanent '? IE even if aux.1 on another page, the link in the menu remains in this mode pour indicate that the page has already been visited?
There ' he means to have the State option: "déjà vu"?
Thank you
Nathalie
You can set the same condition for content, and it would appear the color style, effect etc. even in all States.
Select the object, and then click status fall down, do all States same.
Please let me know if I'm missing something here.
Thank you
Sanjit
-
Type On top of Photoshop Button
So, I placed my photoshop buttons and having type sitting above them. How can I make if the type is ignored by cursor, so it is just interacting with placed PSD button only on working capital?
It is all hinky as it is and I want to just change indicates simply due to turnover on PSD only not the type. Is there a way to select text boxes in MUSE and tell him to ignore them?
Some how I got it with the previous version of MUSE but CC is now all wonky and it keeps wanting to detect the type?
You can see how I had originally, and I'm trying to achieve here: http://www.illustrationclass.com Just flipping the panels on the home page.
Thanks for the help.
TOI suggest using the "status button Widget" to produce these buttons big link. (Located at buttons Widget)
You can add graphics and text in the button, and when a user points to another part he'll react like a button.
The only problem I see is that you have a link at the bottom. You can add text link in the button, but I don't have
think you should have to do separate the rollover and hover States.
-
"Active state of turnover" and "current marking.
I would like to install in a menu, create with edge animate, a "current marking" function (url parameters).
Example:
(1) a button in the menu URL "/ in / compay.php";
(2) the user click on the button on the home page (/ index.php), but when open ' / in / company.php "the rollover button no more but discovers that the"active"State
Is this possible?
Thank you.
Thanks for your help Resdesign! Sorry for my late reply.
I understand it. Only in the time variables are global. Variables in the symbols are local.
So the solution is to global variables in the main stage.
Example: (current)
sym.setVariable ("startglobal", "NAME");
Then in a symbol, get the variable from the scene and make a local variable of the.
var whatname = sym.getComposition () .getStage () .getVariable ("startglobal");
You can then also change/set the variable in the scene of the symbol.
sym.getComposition () .getStage () .setVariable ("startglobal", "Newname")
Maybe you are looking for
-
The first blurry image and text top display
I would like to see a newspaper article, discuss and then blur while displays a quote from the article. Can I use effects blur the newspaper article and then show the quote?
-
Sansa E280 unable to Format disk. Need HELP!
Hey ho Sansa users,. So! Here's my dilemma. I got my Sansa for 2 1/2 years. So far, no problem. Recently even though I was starting to have some funky things happening, the noise turning randomly on its own or the song randomly jumping, not much, onl
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem
-
Cannot create the user account.
I activated the account "guest" and even tried to create a new. Both times, it says "preparing your desktop" the first time I connect, then an error message appears on the way in which it cannot load Windows Mail, and then I get a blue screen - like
-
Windows Movie Maker will not publish my movie - gets 6% & goes no further
I recorded a movie and brought it into Windows Movie Maker without problems. Then I edited the film (not to add anything or only pruned and spliced). Now, I want to save the movie as a movie. However when I do it, he won't get to 6% and then if fr