Picture-It! replacement for Windows 7

Similar Questions

• We need a replacement for Windows Home Server that does not cost $700

  We need a replacement for windows home server that does not cost as much as a PC. 2011 is not really available and 2008 has compatibility problems, because it is based on XP and Server 2003. None of the motherboard manufactures will support XP (thanks to MS) and more recent SATA drives do not work in my motherboard more old.

  Perry

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• I need replacement for Windows 7 disk, how do I get one?

  I need replacement for Windows 7 disk, how do I get one? I need a paper copy, if I can get a Microsoft sent me, or burn one of my present Windows 7 Ultimate I installed it on this computer, it is not serious... (but I would need to know how to do this) Thank you, Noah

  How to replace hardware or lost, broken, or missing Microsoft software

  http://support.Microsoft.com/kb/326246/en-GB

  or

  How to backup your software : Notebooks.com

• How to get replacement for Windows software

  original title: get a CD of Windows Vista Home Premium x 32 to reinstall the software on my PC corrupted who does not run correctly.

  I need to know how to get a replacement of Windows Vista Edition Home Premium x 32 CD so I can reinstall Windows on my corrupted PC that is not running properly. I heard that you can get one with an approximate cost of $10,00. Thanks for your time

  I need to know how to get a replacement of Windows Vista Edition Home Premium x 32 CD so I can reinstall Windows on my corrupted PC that is not running properly. I heard that you can get one with an approximate cost of $10,00. Thanks for your time

  Hey firehawk9591

  read the information on the microsoft below link

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  If vista came preinstalled contact, the direct computer manufacturer and ask them to send you recovery disks vista to reinstall operating system back tp the way it was when you bought it

  they do it for a nominal cost of $

  Walter, the time zone traveller

• Replacement for windows vista CD

  Can I reformat my hard drive without the Windows Vista installation CD? And if so, how do I do it?

  You need a way to reinstall Vista.

  Formatting will be done during the process of resettlement.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• 4 AnyConnect as 802. 1 x begging replacement for Windows - where to put the configuration xml file?

  I want to try Anyconnect NAM as a 802. 1 x replacement begging in point 8.1 of Windows
  And I made myself a small config xml fine file I want to test.
  But where do I put this config file?
  I should rename it to something special or Anyconnect NAM have some additional startup parameters?

  Thank you.

  The file must be called "configuration.xml" and if you already installed NAM, then place the file in \Users\All Users\Cisco\Cisco AnyConnect Secure Mobility Access Manager\newConfigfiles\ Client\Network and restart the service anyconnect

  If instead you are creating a package for deployment, you can put configuration in a directory named profiles/NAM/so that the msi installation package will import the config itself.when you run the msi file.

• Import pictures from iPhone for WIndows 8 by Date the photos were taken

  How can I import photos to date they have been taken from my iPhone 5 for my laptop that has Windows 8? Currently when I import pictures from my phone, they are saved in a folder with the date on which I'm importing, not the date the photo was taken.

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand you have questions, import photos from IPhone to the Windows computer. We will certainly help you with the same.

  In fact, by default, the pictures and videos are saved in the pictures folder in a subfolder named with the date (for example, 2013-09-10). But, if you want to make changes to the template files will be saved.

  For more information: Import pictures and videos from a camera phone or a DVD

  In addition, you can try to refer to the article mentioned below as a solution, saving pictures in groups (folders) of SHOOTING DATE instead of the date imported in bulk. Follow the suggestions of Geoffc1 and see if that helps.

  http://answers.Microsoft.com/en-us/windowslive/Forum/gallery-files/importing-photos-from-camera-in-groups-folders-by/b5c8525a-261d-40EF-BF29-27cf3c578384

  Also refer to:

  Import photos and videos from your iPhone, iPad or iPod touch to your Mac or Windows PC

  http://support.Apple.com/kb/HT4083

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• I need filter replacement for Windows XP

  Original title: disk Boot and repair

  Hello. I need to fix my windows xp installation and have misplaced my disk. Y at - there one i can download? I have my activation key.

  Original title: disk Boot and repair

  Hello. I need to fix my windows xp installation and have misplaced my disk. Y at - there one i can download? I have my activation key.

  First of all, there is no a download for Xp without using a torrent to download that can be pirated. Second, you cannot use any Windows disk to perform a repair installation. You need the recovery for the particular computer disc brand and model you have. If you use a recovery disk that was designed for Dell and you have a RESUME, it will install the drivers for the Dell printer that could damage your computer. Third, your activation key is probably a key OEM which means that it won't work with the other Windows Xp. Fourth drive, you do not specify if you have home or professional.

  Can you tell me why you need to repair Xp? There is a good possibility that there is an alternative to the re-installation.

• Get a replacement for Windows XP installation CD

  My computer is Windows XP and it just crashed.  The software has been installed by the computer manufacturer.  I received a recovery disk, but this is an older version, while the computer has SP2 installed.  Is it possible to get an installation with Windows SP2 disc?  I contacted the manufacturer of the computer, and they couldn't help me.

  N °

  Recovery discs are the responsibility of the manufacturer of your computer.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• What is a free program similar to Picture it 2002 for Windows 7?

  Help me find a free software to do the same work that photo 2002 I have windows seven, my late husband was an artist and I'm selling paintings, prints, key chains and cards, bookmarks.
  Please help, I am a retired and cannot afford to buy programs my thanks in advance

  HI Margaret,.

  Try Photoscape 3.5 http://photoscape.en.softonic.com/ and see if this is the case for you.

  I hope this helps.

  Good luck!

• I need a replacement for Windows 7 product key

  When I bought Windows 7 I was sent 2 discs.  One was one 32-bit version, the other a 64-bit version.  I tried to install the 32-bit version but only seem to have the product key for my 64-bit version.  How can I get my 32-bit product key please?

  In addition, you can only use the key on the single PC, regardless of the bit version you use

• CRUSHED HARD & UNRECOVERABLE SOFTWARE FOR WINDOWS XP PRO DISK. NEED A REPLACEMENT XP PRO SOFTWARE

  ORIGINAL DELL D610 PURCHASER, HAS NO RECEIPT OF THE PAPER COPY OF THE XP DISC.  STICKER OEM ON BOTTOM OF UNIT.  BOUGHT A NEW DRIVE HARD ABD XP ONLINE.  DISC AND PACKAGING MEETS ALL THE TESTS DESCRIBED IN THE PAGES OF 'HOW TO TELL' MICROSOFT.  HOW CAN I GET A REPLACEMENT FOR THE SOFTWARE, EXCEPT BY BUYING ANOTHER COPY?

  Now that I know that the rest of the story...

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click on the button continue, and then click the copy button (to the Clipboard).

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the following Microsoft Genuine Advantage forum and paste the results of the diagnosis of MGA tool in your post, and a clear description of your problem:

  http://social.Microsoft.com/forums/en-us/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  Comment: I think that you will find the COA on the bottom of your laptop is permanently linked to the original Dell HARD drive. Hope that you paid for the new HARD drive with a major credit card, so you can dispute the charge.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Files which are required for Windows to run properly have been replaced by unrecognized versions

  I get this window popping up that reads, "files required for Windows to run correctly have been replaced by unrecognized versions.»  To maintain system stability, Windows must restore the original versions of these files.  Insert your Windows XP Professional CD2 now. "The problem is that I'm not running XP Professional.  I am running XP Media Edition (do not know what version - when I look at 'System' in the control panel it says version 2002, but the OS disc that came with my computer says version 2005 with update rollup 2).  In any case, I only have an installation disc, and when I insert it, the computer tells me it's the wrong disc.  What should I do?

  God help us all...

  Is the CD you have an XP bootable installation CD authentic or some kind of restore CD provided with your system (they are not the same thing).  If it's a CD of Windows, this Service Pack is on the CD?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  If the system works, what do you think might have changed since the last time it did not work properly?

  What is your Service Pack installed?  If you are not sure, do the following:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the results here.

  There will be some personal information (such as the user name and the name of the system), and what appears to be personal information for you, simply delete the personal information of the pasted information.

  When you see a message like this:

  Windows file protection
  Files which are required for Windows to run properly have been replaced by unrecognized versions.  To maintain system stability, Windows must restore the original versions of these files.

  I hope that you are curious to know what is the file and when you know that, you can decide what to do about it.

  You must click Cancel, and then click Yes to keep the file, then you will have an event to watch which will tell you what the problem is the file.

  Search where you sign in to see what is the name of file system Viewer, then decide what to do.

  The event will look something like in this example:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64005
  Date: 10/01/2011
  Time: 14:41:56
  Description:
  The protected system file taskmgr.exe had not been restored in its original, valid version because the Windows File Protection restoration process was cancelled by user interaction, user name is Jose.  The file version of the bad file is unknown.

  When you know what the file is, you can decide what to do about it.  There are probably other copies of the files on your system, or you can get the files from another source.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  eventvwr.msc

  Click OK to launch the event viewer.

  Check your event observer system log and look for a proposed Windows file protection event.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  P.S. Let us know how you go with these Microsoft KB article suggestions.

• I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions.

  Original title: Windows File Protection Pop Up Message.

  I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions. To maintain system stability, Windows must restore the original versions of these files. Insert your Windows XP Home Edition CD-Rom now. The problem is that I do not have this CD and need a way to solve this problem. Thank you

  Hello

  1. have you made any hardware changes or software on the computer before this problem?
  2. when exactly you receive popup?

  Run SFC scans the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

• Windows XP Home Edition SP3 (error: files which are required for Windows to run properly have been replaced by unrecognized versions)

  I get this message: files which are required for Windows to run properly have been replaced by unrecognized versions.  To maintain system stability, Windows must restore the original versions of these files.  Insert Win XP SP3.  Please help - I can't find the disk.

  If the original xp installation disk had sp2, files for sp3 are not on it.

  on the right side of this page is a link for sp3.