Play multiple sounds

Similar Questions

• Best practices to play multiple sounds - a MediaPlayer or many?

  Hello!

  I use the MediaPlayer in QML object.

  Problem: If I have 10 items, and when you touch an object sound... then plays with a MediaPlayer, the sound that plays must finish before its different can begin. (Or you can write the code for "stop the existing sound and plays another"). Whatever it is, you can have a musical whirl when you click each object.

  Current solution: Add a MediaPlayer component to each object, so when you type this object, he plays his own MediaPlayer. Sounds amazing because sounds overlap. In a game, if you hit the fastest objects that their noise can play, it sounds good as the boops/dings/pings are nicely stacked as they sound.

  However, I think that this could be taken memory useless? For example if I had 100 items, I don't think I would 100 elements of MediaPlayer set?

  Is there a better way to make its competitor in QML?

  Select this check box.   They used several simultaneous sounds with a single soundmanger.

  https://github.com/BlackBerry/presentations/tree/master/2012-BlackBerryJam-Americas/JAM09/BaDumTss

• Sometimes sound does not play when you play multiple sounds simultaneously

  It is also a matter of best practices, too.

  I built a game that uses many different sounds (about 48 I think). Many are short, less than a second and a few are longer, of the music cues, etc..

  Example problem: sometimes when there are a lot of play sounds and a music signal is supposed to fire, the sound of the music does not play. I did a trace on the function that plays the sound music and performs this function. Are there limits to how sounds can play at the same time? (It does not only happen to a particular sound, could be any noise)

  Also, regarding best practices, if there is a sound that could be played several times at the same time, a new instance of the noise must be created each time as its played? If there is that a single instance of this noise, will be the previous reading of this noise cancelled when it is called for replay?

  Thank you

  Adam

  There is a soundchannel 32 limit (which may exist at a given time) imposed by the flash player.  all two identical sounds may not play in a number of ms on the other.  There is no perceptible advantage and refusing the deductions that you may be able to play the sounds that are noticeable.

• How to play multiple sounds in PHONEGAP DESKTOP?

  I created a phonegap Office (no Cordoba) game he background music and special sounds (event based), it works fine on the PC browser, but when played in mobile (after compiling using the application mobile phonegap) two sounds do not play at the same time... like when the effect of his kick , the background music stops forever and is not time... does anyone has an idea?

  PS: I am developing for android, but also work for ios later

  As with my response to your other question, we are kind to discuss Orange potatoes vs here.

  The Developer PhoneGap app does not support any other than the basic plugins and a few third-party plugins plugin. You cannot add a plugin it unless you build your own version of the application of the developer.

  For example, if you want to use a third-party plugin, you two (and only two) options:

  1 PhoneGap CLI (or CLI Cordova)

  2 PhoneGap Build

  When you use the CLI, you can add a plugin as follows:

  PhoneGap plugin add cordova-plugin-name - register

  When you use Build (or CLI) you can add a plugin as follows (in your config.xml file):

  It may or may not be true that your problem will be solved during the conversion in an APK. You can not count on PhoneGap Developer to prove that your application works or does not work. Well, there are some edge cases developer has expected also (unless you are very familiar with the internal architecture of PhoneGap). Therefore, do not expect it to tell you one thing or the other. (It's great for quick iteration, Yes, but not not for the final test.)

  So to be sure of anything, or build an application using the CLI or build.

  Note: If you're using a plugin, then it would be a way to solve your problem without worrying. But again, you have to build the application using the CLI or PhoneGap Build because it's a third party plugin.

• From itunes to an mp3 CD burned on a macbook OSX 10.7.5. The cd plays a sound skreechy in the wave cd player. How can I fix it?

  Burned a cd from itunes to an mp3 on a macbook OSX 10.7.5. The cd plays a sound skreechy in the wave cd player. How can I fix it? The cd will play the mp3 in the macbook. He play the cd or access my itunes music? I burn on CD documents successfully. But I've never burned audio successfully. Please notify. Thank you.

  For problems of audio on a CD (as opposed to combustion problems do not at all), you can often clear up by re-burning at a lower speed.  Use 2 x.  This setting is available in the dialog box burn the disc.

• Is it possible to play different sounds for the emails and instant messages?

  Hello

  I was wondering if it was possible to play different sounds for the emails and instant messages. I use Thunderbird quite often with emails and instant messages imported from Gtalk.

  I think it would be very convenient to be able to distinguish the two sounds, because they do not involve the same things.

  Thank you very much.

  Olivier Hubert.

  There are only six modules of cat, three of them are on notifications. Choose the one you think will do the job for you. https://addons.Mozilla.org/en-us/Thunderbird/Extensions/chat/?sort=popular

• could we have a * filter * option to play a sound?

  I'm bored of Eudora. I had a sound for each of my clients, so I knew that to get up and come to answer them. I know that we have a framework to play a sound when * any * message arrives, and I have this job very well.
  But if I had a filter option, as I had in eudora, then, as I say, I could play different sounds for the email addresses that come in. It allows me to be better serving the customer to my clients, because I hear and come to the computer to take care of them.

  ToneQuilla

• My Apple TV is only to play a sound on my iPad but will not show the film?

  My Apple TV is only to play a sound on my iPad but will not show the film?

  Welcome to the Jennifer Apple community.

  Some content providers don't block the video portion working with AirPlay, have you checked to see if AirPlay is supported by this provider.

  If it is supported

  these steps, check to see if things work after each step if necessary, before you try the next.

  1. Check AirPlay is on the Apple TV (turn market if it already is)
  2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > General > network, on the Apple TV).
  3. Restart the Apple TV (settings > general > restart).
  4. Restart the Apple TV by removing ALL cables for 30 seconds.
  5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  6. Restart your mobile device.

  If you're still having problems, the following article can help you.

  Troubleshooting AirPlay

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

  When you make adjustments to your network for better optimization, you can find some of the points mentioned onthis page useful.

• Satellite P30 ceased to play any sound

  All of a sudden my satellite p30 collapsed to play any sound... what should I do?

  Hello

  Check Device Manager if there is no yellow exclamation next to the sound card. In addition, you should try reinstalling the audio driver.
  Furthermore, please check the audio settings in Control Panel under sound and audio devices. Check if the 'secret' is not enabled.

  Did you also check the volume control on the side of the laptop? Do it!

• Satellite L300 play any sound on my speakers

  my laptop is not playing a sound on my speakers even if my laptop says it works fine, I get the sound with headphones, but not without them in, can someone help me please?

  Thank you very much

  Martin.

  Hello

  Sounds like speaker issue.
  What cell phone do you have exactly?
  Have you tried reinstalling the audio driver?

  You have a Realtek HD audio Manager in the control panel?
  If Yes, check the advanced options in the upper right corner.

• Equium A100-306: built-in speakers do not play certain sounds

  I got my A100-306 for 2 weeks, and my speakers do not play certain sounds. This problem appeared only in recent days. When I go in the speaker settings control panel it says that there are no speakers.

  Can someone tell me what to do to fix this?

  Very strange
  I think you should check several possibilities:

  -Plug the headphones and check if you can hear the sound through the headset.

  S ' Please check the Device Manager. Do you see any yellow exclamation?
  Try to remove the sound card and remove the audio driver.
  After restarting again try to reinstall the driver of its new.

  -On the laptop the Realtek HD sound effects Manager must be installed.
  Please check the settings there.

• How to play image sound and moving of AVI file

  Hello

  I'm using LabVIEW 2010 and making the program to play image sound and moving to AVI file at the same time.

  I could play animated image of AVI file using "AVI OPEN.vi".

  However I couldn't play the sound file to AVI.

  Please give me an opinion on this issue.

  Hi yosuke

  If am not wrong you can do with the Windows Media Player ActiveX control.

• Media Player. I have a few movies on memory stick, but when I open the media player it only plays the sound track without video. Can help you!

  Media Player. I have a few movies on memory stick, but when I open the media player it only plays the sound track without video. Can help you!

  Hi Jim,.

  1. What is the operating system installed on your computer?

  2. What is the format of the file you are trying to play?

  3. it worked earlier?

  I suggest you to follow the steps and check if it helps.

  Installation of the Codec and check if it helps.

  Codecs: Frequently asked questions for Windows 7

  Codecs: Frequently asked questions for Windows Vista

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Windows Media Player does not play with sound .m2ts.

  WMP does not play with sound .m2ts.  used for, it is no more.  I tried the ms fix the thing did not help the cause.  What can I do to fix this?

  Hello

  1. which version of the Windows operating system is installed on your computer?

  2 have you made changes on the computer before this problem?

  3. what version of Windows Media Player do you use?

  4. are you able to play .m2ts files to other players?

  5. what exactly happens when you try to play the file?

  I suggest you try to install Codecs and see if it helps.

  Codecs: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the following article from Microsoft to check the version of Windows Media Player.

  http://support.Microsoft.com/kb/190990

  Hope the information is useful.

• I see a file, when I play the sound comes on but no picture any suggestions thanks

  I downloaded a dvd of my home movies that I can see the files, but some play that for 29 seconds and one that says it's a little over an hour just plays the sound, even if I see the picture of him on the record at the beginning.

  Hello

  ·        What operating system is installed on your computer?

  ·        What is the type of file you are trying to play?

  ·        What application are you using to play the file?

  ·        Are you reading DVD file or you saved the file on the computer and then play?

  Method 1: If you play the DVD in Windows Media Player, then run the troubleshooter below and check if it solves the problem:

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Note: applies only to Windows 7.

  Method 2: Alternatively, you can try to install the codec for the file type and check if it helps:

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Windows Media Player frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-frequently-asked-questions

  Note: applies to Windows Vista and Windows XP as well.