Play recordings of RTC on endpoints.

Similar Questions

• TCS recorded video playback using video endpoint

  Hello

  I've deployed a Telepresence from Cisco Content Server (TCS 5.3) and met with problem regarding on how to play videos recorded by video endpoint.

  Under modify records, I don't see an option or the option 'Make check-in available for play on the endpoints '.

  Referring on the Administrator's guide TCS it is said that "If this box is not on the page of registration of amendment, a site Content Server Manager has not configured the prefixes necessary to an alias of reading E.164 and H.323 reading ID to communicate with a site manager for more information. What does that mean?

  And where I can configure the reading reading alias/H323 ID?

  The TCS is registered as SIP and H323 (E.164) on the control of VCS.

  Recorded content have been updated with the recording of "publish".

  Thank you very much for the help.

  Best regards

  Acevirgil

  You must do the following:

  Key 'Premium résolution' option must be installed.

  Record configuration, see the Site settings, such as 'Bridge', not 'Terminal '.

  

  Enter the prefixes to use for recording, and also for playback, it may not be the same.

  Note that prefix of reading options will be unavailable unless the resolution option key Premium is installed.

  Also note the playback using the SIP is not supported at this stage.

  /Jens

  Please rate the answers and question 'Answered' mark as appropriate.

• Error in Duplication of blackBerry Smartphones

  When I try to sync my Curve 8310 vs 4.2.2 he begins to play recordings on the calendar.  After reading the he come and told duplicates found on the device.  Any suggestions on what to try?

  The conflict is associated calendar that I presume?

  There is another option of synchronization - lying which is to replace the data.  In this case, since your Outlook is updated, you can perhaps try overwrite the data of your mobile phone.  What happens to this option, it is that it is not a conflict resolution - you are erasing the phone and replace it with Outlook data.  This will overwrite the current schedule phone completely (and contacts and etc..)!

  If this does not work, then you will probably need take a screenshot of the error and send it across to the Blackberry support.

• Windows wakes up from his sleep and WMC think by mistake the TV recording disc is full, and it lacks the scheduled recordings and live TV will not play.

  Dissemination of a previous record and stop (without deleting) appear to clear the error indicator and TV can then be played or recorded. What is happening in the two windows 8 and 7. I tried to change the disc to record, but the same thing happens.

  do not use the same destination for both version of windows. see if http://answers.microsoft.com/en-us/windows/forum/windows_8-pictures/windows-media-center-wont-record-shows/4d191016-1ba9-4a0b-9938-c54d501e8d6f?msgId=b9898f33-1429-4c6a-bda2-7c051a2c251d help.

  --
  Barb

  MVP Windows Entertainment and connected home

  My Blog - http://digitalmediaphile.com/

  Connected world Blog Reader Windows 8 App Barb-
  http://apps.Microsoft.com/Windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461C-b1d5-06e54a58d298

  Windows and Surface drive Windows 8 App community
  http://apps.Microsoft.com/Windows/en-us/app/Windows-and-surface-community/0abb150e-D287-47d4-837E-9fa51f485ad7

  Please mark as answer if that answers your question

• How to convert 3ga files so that they play on Windows?

  changed title: Samsung Galaxy Player 5.0 8 GB Media Player

  I have the Galaxy G3 phone and I would like to share my voice recordings (which are 3ga files) on my laptop. How to convert this file so that it will play on iTunes or Windows Media Player?

  Frustrated,

  Isake

  I just rename 3ga in mp3 format, then it works well

• I can't play movies remotely. Is it a question of copy protection?

  original title: WMC

  On one of my remote laptops, I can see and play all the TV recordings except movies.  Is this a copyright thing or what?  Is it possible to play movies recorded?

  LOLz.  Happy that you got including (and it was simple.)

  To the best of my knowledge, there is no way to read a disk (on the server) to a client.  But, you can play torn discs.
  Some MC users swear by the media browser for this purpose; others swear by MyMovies.  I like MyMovies.  I have installed on my main MC client/server and the client installed on my desktop & laptop.  I can manage the collection of any one of them and all my rips play on any of the three, as well as my two Xbox 360 (running as Extenders to the main MC.)

  Now, tear may be a bit of an art (and there are a lot of personal preference, too.)  I rip a movie (main title only, w / English 5.1 or better acoustics) using DVDFab (free); I then point video again (currently 75 $US for Suite TV, you need to do this) at the level of the rip and that convert DVR - MS.  In this way, I maintain full compatibility with all what I use and keep the FF/Rew features on the extensions.

  You can rip & convert to many other formats (AVI, WMV, or leave as mi/gal) with other (and free) tools; but Extenders are limited in what they can play natively (or, with playback controls complete.)

• Records downloaded from Youtube freezes when trying to play.

  Original title: HARD DRIVE FREEZE MY RECORDINGS OF YOU TUBE I was download dances since Nov 2011 on my external hard drive and now dances are gel - suggestions?

  I bought a hard drive in November 2011 for my music and dance, and now when I discovered the records they freeze. Help, please!

  Hi cadenangus,

  1. have you done any hardware changes or software on your computer before this problem?

  2. in the application, you look at the records?

  3. What is the file format of the video file?

  You can follow this link & check if the problem persists:

  Playing video files crashes or blocking Internet Explorer - Windows

  Hope the helps of information.

• Voice recordings

  I can't delete my voice recordings. I remove via the USB port of the/RECORD/VOICE file, now they are still in the list of my recordings, can not be played, but they are still on the list.

  Thank you.

  01.01018P.

  I had to switch to USB MTP one and it is then possible to remove these and also other songs that are in the factory.

• Windows Media Player 11 has stopped playing some of my MP3s. Any ideas on how to solve this?

  I have a desktop Dell Dimension running XP. I uninstalled Real Player and Rhapsody, just in case they were causing problems, but that did not work.

  Here is what I noticed:

  WMP plays still files were extracted a CD, the songs that were purchased from Amazon, but not:

  -The MP3s that have been purchased by third parties (for example, recordings of teleseminar I bought

  -Downloaded free MP3s (once again the teleseminar recordings)

  -WMA files that I downloaded (records of my seminars)

  All this has played before. I can't put my finger when he started, although I think that things started to get weird when I downloaded itunes months ago, but I don't remember this particular problem from this time.

  I searched the Web for similar positions, but found none.

  So... any suggestions would be most appreciated.

  Thank you very much
  David

  Hello OutbackDAL,

  Thank you for your message.  There is an option in iTunes to convert all the songs to the .aac format.  This might be the reason why you are not able to play in Media Player, because this format is not supported in Media Player 11.  Right click on one of the songs that can not play and check the format of the song.  If the song is the .aac format, you will need to convert it to another compatible format or .mp3.  If the song is already in a readable format, you can watch download or install a new Codec.  Sometimes, they have several players (that is to say real, Rhapsody, iTunes, etc.) can damage your Codec.  You can get the Windows Media Player Codec from the link below.
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=06fcaab7-DCC9-466B-b0c4-04db144bb601&displaylang=en
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How can I burn my recordings of .wav for audio disc?

  I have a portable recorder on which I made some recordings of playing me the piano.  I am now using WMP to try to burn them to an audio CD.  I have a red beside them, X once I coached in WMP which says that the drive can not burn because WMP cannot determine the length of the files.  He is said to play each of in WMP might help.  There can be no.  Can someone advise me please the easy/more fastest way to reach my goal?

  Thank you

  Just a guess... but it may be worth trying to convert the. WAV files to the. Mp3 format.
  The conversion software might recognize and specify the duration.

• Pavilion G6: Registered host will not play DVD

  I've been recording videos on DVD RW disks that play fine on the DVD player but I can't play on my laptop running Windows 8.1 (or an older Office XP).   I checked all drivers etc and saying up to date and work and although I'm not technical interested believe that it is possibly a compatibility issue?    I checked the properties for the drive and with the disc, it is show that nothing out there but it is certainly as it plays on the DVD player!   When I try to play on the media player on the desktop, it says ' insert disk ' (the disc is!) and on computer portable Cyberlink DVD player is saying the same thing.  I downloaded VLC and that says: cannot read the disc.  I tried to find the answer on the internet but nothing seems to quite answer my problem... it was suggested to make sure discs are finalized after recording, but this is done automatically and confirms this title so I know it is not that.   In the end, I want to get on DVD recordings saved on the laptop so that I can modify it them and record clips of little bits of sequences of each disc so any help would be appreciated.

  Hello @penjie,

  Thank you for providing me with this information!

  Please take a moment to review these additional resources:

  HP computers - resolution DVDs and Blu - ray movie problems (Windows 8)

  HP computers - drive cannot read disks (Windows 8)

  The second document is similar to that used in the previous post.  However, it is troubleshooting for your OS, Windows 8.  If you don't have it already, please continue troubleshooting this document, including the restoration of the system and test the drive for hardware failure.

  If all else fails, you may need to have the replaced disk, or contact the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

  Have a great weekend!

• No sound, cannot start Windows Audio Endpoint Builder service, RPC server not available

  I had the audio works fine, so I checked a few services that are sure to value manual, and now I have problems with my audio. I went to all the necessary services that should be started and all have the value automatic and running except for the Audio service of builder endpoint, windows audio service and service audio creative.

  When you try to start the audio endpoint Builder service windows I get error 1722: the RPC server is unavailable.

  I can't start the service windows audio either. I get an error 1068: the dependency service or group could start.
  I tried to change the local system account log in info and now I get a different error message: 1079 the account specified for this service is different from the account specified for other services running in the same process.
  I tried to uninstall my sound card drivers (creative audigy 2), my pilots on board her (AC97) then reinstalling both, no chance.

  I am running Win 7 Ultimate 64

  I am also having a problem with my USB keyboard goes dead. the backlight stays on, but none of the buttons will respond. I have to unplug the USB and use it to hold back in order to reinstall. It seems that if I do not use the keyboard for a while it turns off, but the lighting. I disabled in the power of USB energy saving profile, and the problem persists. My mouse does not turn, so I think it is not related to my power profile. It's a keyboard Saitek Gamers (USB).

  Any help would be appreciated.
  Thank you
  Alex

  ETA *.

  DCOM Server process Launcher started, automatic
  Plug-and-Play started, automatic
  Multimedia class Scheduler started, automatic
  Remote procedure call (RPC) started, automatic
  Windows Audio Endpoint Builder not started, automatic (error message 1722)

  Update #2 that I was able to get the right connection info to get rid of the error msg 1079.
  I typed in NT AUTHORITY\LocalService and left the empty password.
  now, I get the same msg of error as a generator of endpoint... RPC server is unavailable.

  Edit # 3
  I turned on the power and everything started working as usual.
  except that I still have the problem of keyboard.
  Thank you

  I guess the problem with the Windows Audio endpoint builder, it's that you have disabled the Windows on Windows 7 power management.  For some reason, the audio services cannot start if power management is disabled.

  I was going to install the software for my UPS APC power management and requires that the Windows power management is disabled.  I disabled the service and rebooted the system and noticed that the audio services is not started.  You try to start their hand gave the errors you mentioned.  When I started the service of power management, I was able to start audio services.

  Microsoft does not mark as services that depend on it, but there is a relationship.  I know that in Windows 7, which they said he optimized use of energy for the audio and I guess audio services are looking at power management to see what type of profile is in use.  Because power management does not work, it is unavailable and terminate the audio services.  Again, this is just a guess, and I can't find definitive answers to this topic.

• Windows Media Player will not play m3u files and VLC files

  Hello

  When I try to play these jets of Radio internet Player Windows Media won't play them. I get an error. The VLC Media Player plays this m3u files. What can I do to play the files with WMP? Windows 7 Professional SP1 with all updates

  

  Regards Marco Moock

  Hello

  I worked until I installed the Central Endpoint Protection System. WMP 12 sometimes plays the files correctly.

  Regards Marco

• Users hear MoH when RTC hang up communication

  IP phones begin play at the Ministry of health when the PSTN phone hangs up. After hearing the Department of health for about 10 seconds, the call disconnects.

  The system is CUCM v10.5.1. The PSTN gateway is a 2951 (IOS 15.4 (3) M) with T1 - PRI related CUCM by SIP trunk.

  If the call comes from PSTN internal IP Phone, then RTC hang up, IP phones will hear the Department of health for 10 seconds. Wireshark on phone shows that the Sub CUCM sends a guest of the SIP - SDP Protocol to the IP phone. It gets finally a BYE 10 seconds later.

  If the call is launched with phone IP and PSTN hang up, then call end as usual. Wireshark shows that the CUCM subscriber sends a SIP BYE on the phone.

  In both cases, debug the CCSIP Messages on the bridge which shows the gateway sending a SIP BYE to the Subscriber and the Sub you immediately respond with OK

  SIP Trunk gateway and phone enter the same peripheral pool CUCM and Subscriber. Device pool has MRGL with the MTP software and hardware. This happens with SIP and SCCP phones. I'm not requiring the SIP Trunk to use MTP

  Any ideas?

  Thank you, Randy

  Hello

  Is the phone you are calling is added as a remote destination on CUCM for unique number?

  According to the guides of the options:

  When the remote destination is hung up, Cisco Unified Communications Manager puts the related state of hold office phone, allowing the user to resume the call by pressing the resume button.

  Aseem

• Media Center won't play recorded video

  All my recordings are protected recorded video HBO on my hard drive of the PC. When I read them to my PC using Windows Media center only monitor, all play. When I use a USB to HDMI converter directly to my TV, some of them play, but some give me the error "display drive errors: video playback device does not support protected content playback. Since it is a direct connection to my TV from my PC where are stored the videos, I don't understand why this is not allowed. Is anyway to get Media center to recognize this device? Is there another device that works? This can be corrected. Do I have to use an Extender?

  On Fri, September 12, 2014 13:57:20 + 0000, CharlesHickox wrote:
   
  > No matter if I unplug my monitor and try to use this device as my monitor or start without the device and plug it in then. It should work as there is a direct link from my PC to the display device. In this case, it should act as an Extender. Can this be fixed by retrieving recognized firstly
   
  Charles, I looked towards the top of the map that you said that you used in the first thread you
  started earlier this month. There is no indication that
  http://www.cablematters.com/PC-446-101-cable-matters-SuperSpeed-USB-3020-to-HDMI-adapter-for-Windows-and-Mac-up-to-2048x11521920x1200-in-silver.aspx
  HDCP is consistent.
   
  I read a few pages of the magazine for this device on Amazon. Most people
  who looked at it to use it as a monitor. A few people mention a message
  not HDCP.
   
  I don't have any other "answer" for you. I'm sorry.
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question