Please help with the problem of driver SAS S10 6483

Similar Questions

• Please help with the problems of Vista SP2

  So I spent all day on the forums here and I'm head over heels.  I had problems with Windows update and some other problems on my Dell Studio XPS.  It is a tower with double HDs in RAID mirror running Vista 64-bit with SP2.

  I got it for 3 years and I thought that I clean and correct certain defects to go back to the original Dell factory condition.  That did not fix the update install problem I did cleaning.  Now it's worse.

  I'm trying to install SP2 and get a catastrophic failure 0x8000ffff error-UNEXPECTED

  The onlychange is that several months ago, one of my WD 640 GB drives factory failed and I replaced it with a Seagate Barracuda 1 TB since I couldn't find a 640 GB drive.

  I tried to stop and restart all services BITS, etc. no luck.

  I tried to run among the MS FixIt for the problem of update, but it fails because it says that it cannot initialize the powershell.

  Help, please... I'm hopelessly lost and can not spend more money on this thing.

  Thank you!

  If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and independent (i.e., not a BigBoxStore or a Geek Squad) computer repair shop & ask them to do the job.

• Please help with the problem of Validation

  Recent changes: Yes, had to replace the hard drive of my laptop (I had three years and more)

  When error: when I copy the code returned by the validation tool

  What tool: GenuineCheck.exe (downloaded from http://www.microsoft.com/en-us/download/exe-validation.aspx)

  Windows Update stopped working, too.

  You will appreciate the help.

  RP3456

  Separated by the moderator of this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/validation-tool-gave-me-this-answer/e51e7172-5bc8-42AE-AAB5-7f3c2fc0a166#LastReply

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Please help with the problem of deployment OTA

  Hello

  I'm trying to deploy my application (for the first time) using a live approach.

  First of all, let me mention that I developed this application using the BB for Eclipse plugin.  It generated files jad and cod.

  I have 5 files of cod and jad for the application, all in a directory on a web server. Apache has been set with the necessary MIME types for jad and cod files.  When I use the browser on the BB to access the jad file, your browser correctly displays the name, Version, vendor, etc. of my application.  But then he said:

  This application requires the following modules, which are not installed:
  {followed by a list of my other 4 modules}

  This is obviously a true statement, but I thought that the jad would cause the BB get these other modules and install them automatically.  It would really suck if my customers had to manually install each of the 5 modules.

  It is therefore possible for the other 4 modules loading is automatic, and how I have to happen?

  Moreover, my OS is 4.2 and my application is written for this OS.

  Thank you
  Paul

  See if this helps:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=25327&query.ID=11...

• Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem.

  Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem?

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Error 213:10 on windows 10. Please help solve the problem

  Error 213:10 on windows 10. Please help solve the problem

  Different code, but can help - error 213:19 license https://forums.adobe.com/thread/1907953 because of write permissions

  Run all programs as Administrator http://forums.adobe.com/thread/969395 to assign FULL... Permissions said yet, but it is sometimes necessary for Adobe

• Get error 207 trying to download creative Cloud and someone please help with this problem, thanks in advance please.

  Get error 207 trying to download creative Cloud and someone please help with this problem, thanks in advance please.

  Please refer to

  Error 207 to "install Adobe".

• Please help with the DNS problem in VMware Workstation 6.0.2

  I have 3 servers Configuration of VMware Workstation. There are a the Ethernet parameters ' host only: a private netwrok shared with the host country. The problem is I have a server configured as a main domain controller, I can join my other two servers to the domain very well, I can ping by name, but none NSLOOKUP. Basically I have a DNS issue that I MUST correct.

  Anyone know what could be the problem? Or where to look? I attach a doc with my settings.

  Thanks in advance.

  Have you checked that the clients are configured to register in DNS?

  Have you checked the the event log for entries regarding a DNS record failed?

  Did you check that there is a records for each host in the appropriate DNS zone?

  The clients have the right DNS server configured?

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

  Published by AWo

• Running Firefox 10.0.2, can not add new Mycroft Project search engines. Error message: "you need a browser that supports opensearch to install this plugin" Please help with the steps on how to solve this problem in Firefox, thanks

  Cannot add new Mycroft Project search engines in FF 10.0.2. Error message states: "you will need a browser that supports opensearch to install this plugin.

  You can install the Sherlock plugins or lacking as well?

  • http://mycroft.mozdev.org/Google-search-plugins.html

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• pls help with the problem of player

  Hello

  I posted last week, I couldn't open pdf after update of the player.

  After having followed the advice that I received, I uninstalled and reinstalled, accepted the agreement of the user, searched and not found the eula file.  Finally I managed to open the pdf files, however drive either now hangs completely or the blue circle shows updated continuously propagated.

  It appears that there are major problems with the update or I'm doing something completely wrong.

  could someone please suggest a way to solve this problem or a way to get back to my previous version that worked?

  Thank you very much in advance for any help.

  Kind regards

  Andy

  Three things to try - which some have already been given to you in message your last week...

  1. Using Windows Explorer navigate to C:\Program Files (x 86) \Adobe\Reader 11.0\Reader, and then double-click Eula.exe and accept the license agreement
  2. You can open Adobe Reader by itself?  If so, try to disable the Protected Mode [Edit |] Preferences | (Improved) security].
  3. It might even be a malware problem; See http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

• Impossible to uninstall or disable the drivers wanminport and unexpected with the network adapter. Please help with the best solutions.

  Dear friends,

  Have you encountered a problem like this is Nati sp1 or sp2, currently when I get problem like that I solve (we run system restore or Startup Repair last option: reinstall the operating system)

  symptoms: System very slow and unable to boot or just freezes on the Welcome screen, or sometimes not even vista starts in safe mode or safe mode command prompt.
  I tried the next option, this has worked for me in some cases. but not many times.

  I open a command prompt terminal high, do you it by logging in as an administrator as launching the cmd.exe as an administrator (right click, run as administrator). Then type the following command that uninstalls the device said:

  netcfg EI u ms_sstpminiport

  want to know is there permanent fix or patches for this problem and why this is happening only in vista. I also had windows 7 and xp sp3. I had no problems in that.

  Kind regards

  King of the computer

  See if the following Help article: http://www.vistax64.com/tutorials/171469-uninstall-device-device-driver.html.

  If this does not work, download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and go to the tab all. See if you can find the place where the device (or at least the driver) is loading and uncheck to stop to happen.  Click OK and exit, and reboot and see if the problem persists.  It cannot remove the device or the driver, but if he let them go then the problem is solved until we can find a way to remove actually - hopefully without needing a repair system/upgrade or a clean installation.

  I hope this helps.  I would like to know how it works.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Help with the problem of understanding ip address

  Hello

  Can anyone help me please with this. I grabbed the following to my pix 515e worm (6.2):

  IP address dmz xxx.xxx.210.72 255.255.255.248

  But I got the following response:

  IP and subnet mask can be an invalid pair

  I don't see why this is here. Can someone please explain it to me. I don't see anything wrong with the ip address and the subnet.

  Thank you

  Dan

  Amigo, solve, it's very simple: (courses of subnetting recalled CCNA)

  your subnet mask is 255.255.255.192 (26 decimal)

  The interesting octet in mask is so--> 192

  and--> 64 is interesting byte of the address

  (1) find the magic number, having subtracted:

  256 interesting byte mask-> 256-192 = 64

  (2) find a Multiple of magic number (here: 64) that is less than or equal to interestzing byte of address (also 64).

  Then first Multiple of 64 = 64,

  Then start your work 64 subnets

  1 subnet 255.255.255.64.

  -> Add 64 to find the following subnets: always<>

  2nd 255.255.255.128 subnet

  3rd 255.255.255.192 subnet

  IF YOUR AVAILABLE in 1 subnet IP ADDRESSES are: xxx.xxx.210.65 to: xxx.xxx.210.126

  Don't forget xxx.xxx.210.64 and xxx.xxx.210.127 are not allowed as an IP address (subnet number and dissemination)

  Now, if you want subnets with 8 welcomes everyone, then you solve (2 ^ y - 2 = 8) or (2 ^ y = 10)

  You'll have y = 4

  (because 2 ^ 4 = 16 and 2 ^ 3 = 8 which is unsuffisant)

  Therefore, book 4 bits for subnetting.

  So, your subnet mask is 32-4 = 28 decimal places

  Which means that it is 255.255.255.240

  240 = 128 + 64 + 32 + 16 (2 ^ 7 2 ^ 6 + 2 ^ 5 + 2 ^ 4)

  To find the Ip addresses available for 28, same reasoning as above (the magic number is 16 here)

  For example, they are xxx.xxx.210.65 to xxx.xxx.210.78

  xxx.xxx.210.79 is not allowed (emission) and in

  this case you have 14 addresses available

• Please help with installation problems

  Hello, I'm new to the first 10 items and I'm stuck at the stage of project configuration.  I read a book on the use of Prime Minister, attempted to experiment with it, and I even contacted the Help Desk (they have been no help).  I am now hoping that this forum, which seems to be filled with competent people, can help me set up and get started on my new project.

  I used to do video production when we were still shooting on tape (Yes!), and there was no "configuration of a project" - in fact, there was no computer editing at all!  Now I want to make some videos as well as a personal project and, more important still, like a video RESUME.  The curriculum vitae is not for video work, by the way, but for a position at a place called Techshop technology educator.

  My ultimate goal is to have good looks (i.e. decent resolution and size) video that I can send them on Youtube and have as a type DVD video or even just a simple file that I can put on some removable storage (probably a USB key or flash drive) media and mail to my prospective employer.  If I understand correctly it will achieve this by editing together a final project and 'share' in two formats different-ok, save in a format (not clear about that) and upload them to Youtube as soon as the first (and then I need to find a way to do it on my channel).

  Now we come to my question.  I don't know what format to use.  And I don't know where to find what I SHOULD use.  Heck, I don't know even what image format uses Youtube.  My original idea was output to 4:3, product final SD because A) I am familiar with that kind of video of framing and B) I thought that it would be visible on any monitor, a regular or large screen, without break or black bands.  Finally, it was important because I wanted people on Youtube to watch in full screen and get as much clarity and size as possible.

  I made my original film on a Panasonic SC - V10 cheap camera (I know, I need better, but that's what I have).  I think I shot most of it at a resolution of 920p, and I'm sure that it was released in 16:9 format.  A little images, stuff, I really didn't remove, time is at p. 1020.

  However, I think that I myself has really shot in the foot here - I did not use the premier capture images in my project!  I filled out my SD card, so I just moved the files from the SD card manually on my hard drive and deleted from the SD card.  Now, they are all in. MP4 format and I really cannot go back and reshoot.  I learn, however, that the Prime Minister is VERY picky about what he's going to work with and I need to somehow be import these files into my project or convert them with another program (I have a called Wondershare that looks nice) THEN import them.

  All that being said, here are my questions, and I hope that if you will forgive me if they are really noob or have already been addressed:

  (1) do I need out in 4:3 format?  Is this a good idea?  Or should I really, really let him alone to 16:9?

  (2) is it an easy way (ish) either convert the image format inside of the project (don't forget, I want not out on Youtube or a normal file with black stripes) or BEFORE I start editing?

  (3) in the light of the I start with raw images and the final product with that I want to finish, how I need to set up my first project when I create?

  (4) what is the best way to get these MP4 in my project?

  It is a very long message and I deeply thank you for sticking with me and help out me.  I hope I can do the same for you one day and thanks in advance for the help!

  Andrew

  First, he must know what you are editing, so you can do a project that corresponds to your video

  Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037

  What is a CODEC... a primer http://forums.adobe.com/thread/546811

  What CODEC is inside of this file? http://forums.Adobe.com/thread/440037

  .

  A report with the codec of your file details, use the programs below... a screen capture works well for people to SHOW what you do

  http://forums.Adobe.com/thread/592070?TSTART=30

  .

  For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

  For Mac http://mediainspector.massanti.com/

  Then, help help you to start your project

  Basic http://forums.adobe.com/thread/537685 of Steve training tutorials

  -v10 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-Version/dp/1466286377/

  -All the http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/1451529724/

  FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq

  ADVICE http://forums.adobe.com/community/premiere_elements/premiere_elements_tips

  Another help site http://muvipix.com/ or http://muvipix.com/phpBB3/

  The http://help.adobe.com/en_US/premiereelements/using/index.html User Guide PDF

  Right click on the PDF link located in the upper right corner and select this option to save to your hard drive

  You bring a project to match your video, then do the different codecs and/or sizes when you are finished

• Please help with my problem of Bar Menu Spry Dreamweaver CS5

  Hello

  I would be really grateful if you could help me with my problem. I use dreamweaver CS5 (design mode) on PC and I use spry menus bar as my browsing. for some reason when I go to the sub menu there's going behind the text on the side of it. This can be seen here: http://www.moneymakingmonkey.co.uk/

  How can I change this?

  can someone help me? I'm sure its simple but I'm new on this (as you can probably since my site up to this HA)

  Thank you very much

  Liam

  Sorry to be the bearer of bad news, but the use of ridicule of absolute positioning is the problem, not the Spry Menu.

  If you change the z-index in apDiv14 as later, it should help the menu to be at the top

  {#apDiv14}

  position: absolute;

  left: 89px;

  top: 110px;

  Width: 221px;

  height: 237px;

  z index:900.

  visibility: visible;

  }

  GRAMPS

• Please help with the release of iOS 3.0

  I wrote an app in October 2010 with Flash 5.0 on Mac.

  -Required system iOS 3.0

  I was publishing an update on the app with 5.5 Flash on Mac

  -iTunes Connect will not accept the upload because it isn't backward compatiable.

  -New API requires iOS 4.0

  How can I publish with Flash 5.5 and be compatiable with iOS 3.0?

  Or do I have to reinstall Flash 5.0 to release this update?

  Maybe the problem is that I have spend to retina display resolution.

  If I went and changed the high resolution, return to the standard, it would make a difference?

  Thank you! Thank you! Thank you!  For those who have the knowledge and the time to help!

  Jim

  Relocation of CS5 and making the IPA, there may be the fastest solution. Deactivation of the Retina display is not enough, because the publication of CS5.5 requires at least 4 iOS and at least an iPhone 3 g. Your existing application probably supports the original iPhone and 3G, so any application made with CS5.5 will not work on those.