Please I havea problem with my driver vga with windows 8

Similar Questions

• I have problem with windows update

  I have problem with windows update

  and I can't find the Hebrew pack in windows update?

  I have windows 7 ultimate

  You use this procedure: http://support.microsoft.com/kb/972813 ?

  Hebrew should be available, see: http://windows.microsoft.com/en-GB/windows7/products/features/language-packs .

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• I have problems with windows update

  Hello

  I have problems with the updates of the window.  I read install my window.  and start the update.  I update well until it installs the update for service pack 2. Once it restarts is said to check the updates, you must first install an update for the update of the window...

  When I click on install update of the stop and keep it on the research.  I have don

  ' t even use all the data.

  I already tried the Microsoft fix it and some troubleshooting aspiration which I met on the Microsoft site.
  (error trouble shoots)

  Windows update error 0x80072efd - not fixed

  recent update - no fixed installation issue.

  Can anyone help me please with her.

  Thank you

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Cannot open Word or Power Point Error 1719 also have problems with Windows install.

  OT: problem.

  Hi all

  I used ccleaner, after finishing, I was not able to access to word or ppt... I am getting error 1719 and problems with windows install and I got dnssd missing dll, but I put one in Wow64. I really don't know where the problem lies... I tried everything from softbooting to sfc/scannow... I have windows 7... I copied the log on the desktop and I noticed this repetition:
  CSI 0000032 b [SR] could not check component of 6968173078fa737442bd424a51db3e21 files, Version = 11.2.9600.16518, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, neutral, TypeName neutral, clear PublicKey is damaged (REAL)

  but I do not understand... Someone help please urgent.

  I used ccleaner

  -> Why would you do that? CCleaner is known to cause problems!

  After finishing, I was not able to access to word or ppt

  ->, You might be able to repair the damage with the system restore. It allows setting up Windows to a point before using CCleaner.

• I have problems with Windows 7 64 bit connect my drives external iomega.

  A pop up keeps appearing saying 'it is the first time you tried to connect to these readers' even if I have linked dozens of times. This problem started about two months ago. With this pop up another 'permission' box pops up saying that I have to re - enter my credentials every time I turn on my laptop. Also, I noticed some of my iTunes songs download, but it says that the songs are there AND my automatic update for my laptop did not work. Any help would be great!

   

  Hello

  1. do you receive an error message when running automatic updates?

  2 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  See the link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Run the troubleshooter for Windows Update problem.

  See the link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  For any question related to iTunes, I would say to contact iTunes support team for assistance.

  https://discussions.Apple.com/community/iTunes/

• I have problems with Windows Update (who guess why I'm here)

  I was diligent to keep Windows 7 updated with the latest patches, etc.

  Recently, when I turn off my machine, I get the blue screen (not the blue screen of death), but the blue screen saying ' is windows update, blah blah blah, your machine automatically turns off when finished.

  Which is fine, but it just sits for hours (if I left it) with the spinning of glass time and nothing happens. If the system is suspended.

  Yet when I reboot (first in safe mode, then normal startup) all right.

  I go to check my updates and windows says it is very good also. I say look for new updates... and Yes, it says no new updates...

  So everything is very well (right), but this cycle produces two or three times I disable my machine for the night...

  It's getting rather tedious... Please help.

  Oh, no error codes are displayed as he thinks that everything is fine. I emptied the Software Distribution folder several times, but that does not cure the problem.

  Any suggestions would be greatly appreciated

  Johnny D

  Hmmm,

  I have found the culprit. I found that a new update of my disk imaging software (Acronis image) was LURKING in the background. I have disabled for now and see if that solves the problem...

  Stay tuned for more.

  Johnny

• I have problems with Windows Mail where if I delete an email it comes back and does not show as being deleted.

  original title: windows mail emails will not remove properly

  I have 3 email accounts Windows settings on my computer. Two work well but we do not. When I try to delete an e-mail message from any folder, it is always visible until I have let the record can return and then it is transferred in the deleted folder. If I try to remove it from there it remains, but when I leave the folder and back then it will be deleted? Please help very frustrating

  Try to compact and repair the database and see if that fixes the problem (see www.oehelp.com/WMUtil/).  If not, then look for antivirus or other 3rd party program interference (see www.oehelp.com/OETips.aspx#3 of many antivirus programs are not compatible with WinMail).  But suffice it to compact and repair the database could solve the problem.

  Steve

• I have problems with window vista boot as well as with the windows updates.

  Windows vista does not restart.   I have to go int recovery and channge the computer to an earlier point in time.

  In addition, widows update will not work.  Simply runs for hours and downooads nothing.

  What can we do about it?

  Hello

  1. don't you make changes on the computer until the problem started?
  2. do you receive error messages when you start?

  I suggest you perform a repair of the system using a Vista installation disc.

  See these articles for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

• have a problem with windows mail using vista, it won't send mail it's just continues to ask the user to verifery a password

  windows Vista mail problem

  have problems with windows mail with vista, it will not send an email he just keeps asking to verifery user, a password have checked all the settings a knowledge they are correct... can connect to the server an everything is ok... get this error msg... Account: 'att.net', server: 'pop.att.yahoo.com', Protocol: POP3, server response: '-ERR [AUTH] invalid username or password. (#YSH001)', port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92... on this for 2 days may not understand... Please help?

  Hello

  I suggest you to follow the steps in this link and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

  It will be useful.

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Problems with windows 98 in VMware 6.5

  I have problems with Windows 98 in VMware workstation 6.5. I can't get the screen resolution is greater than 800 x 600 or higher than mode 16 color mode color. No 16 - bit. Mode 16 colors. Also, I can not healthy work and does not include the link to the note tech sound on the guest98 Workstation 6.5 support page and even the link which is he's dead. I suspect that resolution and color mode problems have to do with crap, generic video driver emulates fun. Is it possible to use a better? On the issue of sound... no idea.

  My material is important? I can post the form if you need.

  I have not noticed any unknown devices in Device Manager and I'm not having problems restarting.

  Any help would be greatly appreciated. Thank you.

  OK, I dug my Win98 guest and did some tests.

  First of all, I want to apologize to you.  I proposed to install the wrong driver - it bluescreens my guest as well.  I'm really sorry for all of your time, I lost.

  Http://sanbarrow.com/vmx/vmx-sound.html , I find that the default sound card is a "ES1371.  Looking for this model on the web site of Creative gives me another driver.

  The driver that I downloaded is called 'epw9xup.exe' and is 976 KB in size. I get an error unable to 'load newest MIDI', but I get audio startup after you install the above driver.  I hope that your game requires no MIDI...

  Be sure to take a snapshot of your guest before you try to install the driver.  That way if something is wrong you can just go back to the previous snapshot.

  Please try the above driver and let me know if it works.

  I'm sorry to give you the wrong information.

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Problems with Windows Update after uninstalling SP2 (Vista Home Premium)

  Hello, everyone!

  Two days ago, I tried to install SP2 through my Windows Update. During the installation and then restart, it stopped on step 3 (0%), ignored and open Windows normally. But, I realized that I had totally lost Aero (I didn't even have the option in the window color and appearance), and also Windows Update constantly gave me the message that I always important updates - SP2 has not installed correctly (I rebooted the computer several times to try to resolve this problem, but everything remained the same: stop on step 3) ", running Windows, and once again the message that I've updated important). I searched in various forums, but could not solve the problem, so I decided to uninstall SP2 via Control Panel. But it doesn't let me do that - whenever I clicked on the button uninstall, it says that the installation is not finished yet. So, I tried the system restore, but whenever I clicked it, an error message (that I didn't understand at all) appeared. So, I went into safe mode and tried the system restore and it worked (Control Panel uninstall option does not in Mode safe either), and everything is back to SP1. But now I have problems with Windows Update - I get the error message 0 x 8007002 (and even 0 x 8007005 several times). I tried everything I could find in the forums (the thing with automated updates service does not because I don't have this option in Services), but nothing works. If anyone has any advice whatsoever, I would be really grateful for that, because I don't know what to do.

  For safety, I use NOD32 anti virus, Tall Emu Online Armor and ThreatFire.

  Thank you very much!

  Hi EvanaZgb,
  Thank you for visiting the Microsoft Answers forum.

  I would say to first disable the anti virus and other security software. Then proceed as follows:

  STEP 1
  ------------
  Download and install the latest version of Windows Installer
  To install the latest Windows Installer, visit the Microsoft Web site at the following address:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 2 now try to update again and post back with the results
  ------------
  Cleanup, utility to download and install the Microsoft Windows CleanUp utility. To do this, see the Microsoft Web site: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now try to update again and post back with results

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problems with Windows Installer after using System Mechanic.

  I had a problem with my Dell 2 years and was told by the Support Dell buy iolo System Mechanic. However, now I have problems with Windows Installer (it is not installed correctly) and I've read that this can be caused by the registry cleaner in the iolo System Mechanic.

  So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

  Thank you!

  original title: Registry Cleaner/Windows Installer

  So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

  1 no, the registry cleaners can give you immediate relief, but they are a big pain in the long term.

  2. follow the four methods listed in the resolution section of the following article:

  http://support.Microsoft.com/kb/2642495

• Satellite Pro A120: I have problems with the installation of the graphics driver for W2k

  I installed windows 2000 on an A120, the system is fully packed and service updated before I even start to install the necessary drivers, I am unable to restart the system. I once, install as recommended drivers that I have problems with the graphics driver because it will not be installed because it requires a reboot and then I can't install new programs that require a restart that the driver has not been installed correctly.

  The laptop is a Pro A120, age of 1 week and came with XP home, because of this toshiba will not offer me support I changed the o/s even though they obviously support 2000 on this laptop, because they provide the drivers.

  Any ideas would be greatly appreciated.

  Hello

  Did you use and install the drivers from the Toshiba driver page right?
  The drivers of Toshiba W2k for Satellite Pro A120 have been published and are ready!

  But please pay attention to the Toshiba drivers.
  There are two different sets of Satellite Pro A120, with different drivers W2k!
  After choosing the good laptop and download the drivers please follow the proper installation order that is indicated in the document "installation instructions"! Check it!

  I think that if you follow this guide line everything works and runs correctly. Good luck