Plugged says battery icon, does not support
Plugged says battery icon, does not support? How can I load?
Hello
I understand that you are facing problems loading with your battery.
I suggest refer you to the suggestion posted by $CaR face February 9, 2010 in the following article.
Brand new Windows 7 system: battery plugged in, not supported
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/brand-new-Windows-7-system-battery-plugged-in-not/d338d4c6-865a-49a3-8333-8c30e989a4f8
Additional information:
Taking care of your laptop battery
http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-battery
Hope this information was useful. Please answer with the results and if you have any other questions or queries on Windows, we're here to help.
Tags: Windows
Similar Questions
-
To access the cam on the site Web of Cornell bird's nest. Plays fine on PC. For my Samsung phone error says "== browser does not support html5" FF for Android and Flash for Android updated, rebooted the phone and got the same error message. The parameters defined for tap to play. Help
It seems that YouTube provides no content in h264 or webm for this video. https://www.YouTube.com/embed/Q4iKJIiYRek breaks for me on any Firefox or chrome without Flash.
-
NB550D - battery icon does not always reflect the right balance of time
I recently bought a NB550D and I must say that, first of all, I am very happy with it. It tends to be a bit slow, but I can live with that.
However, my problem is that the battery icon may not always reflect the right balance of time. After a full charge, it can present 9 remaining hours but after a stop and restart it will be may show 75% and the remaining 3 hours. If I stop and restart it can show 75% and remaining 6 hours
When I started the unit I enabled him to discharge completely (by means of) three times, as suggested by the seller in the store, but quite frankly it seems not a fall of difference!
Any advice will be appreciated.
Concerning
Hello
Like Tom, battery depands of working time on the use of the laptop.
Battery time can always change.In addition, I would recommend calibrating the battery to ensure best performance.
You must charge the battery until the led would turn to green (blue) and should unload completely the battery until the cell stops automatically.
This process must be repeated several times. -
When you try to watch netflix it says 64 bit does not support silverlight
Have windows vista version, had netflixs and looked just fine. Something happened to the p.c., now when I go to look at, it says that 64 bit version does not support soft micro silver light. Not true! We need to help, please!
Have windows vista version, had netflixs and looked just fine. Something happened to the p.c., now when I go to look at, it says that 64 bit version does not support soft micro silver light. Not true! We need to help, please!
Search for malware:
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner.
Uninstall all Plugins Internet
Make a note of what you uninstall so after getting their all uninstalled, you can reboot and install again. Be sure to get Adobe Flash Player (all versions), Microsoft SilverLight, Apple Quicktime/iTunes, RealPlayer/RealAternative, Adobe Air, Adobe Shockwave Player, etc..
-After a reboot - visit their web pages, and then install the latest versions.
Reset.
Try again.
-
Satellite C660-A259 loading battery icon does not move
Hello
Well, I have a question about battery:
Is not supposed to move in the icon next time and not become constant on the screen of the laptop while recharging? like when load you mobile phone that it moves up to his full supportBecause in mine only move after I plugged the cable the battery of entrance for a few seconds and then stop to move and become in the background and the very slow recovery.
Is this normal? because I used to see other laptops try icon moves while it recharges like a mobile phone
help would be very appreciated
Hello
That s nothing unusual in my case it of the same.
If you unplug the power adapter, you will see just a battery icon.
If you connect the adapter once more, the battery icon would be changed to the icon of the battery with a small power supply. Now, this icon is moving for a few seconds and then it seems stable.
Only the battery indicator flashes orange during charging. -
G62 won't charger / battery icon does not open!
About 3 months ago I bought a laptop G62 PC world, before I have the headache of taking it back, I want to see if there is something I can do.
First, the laptop does not always accept the charger and the light does not appear. Some time with a wiggle, it will work, but if I move it can disappear, so never the charge of the batteries. It doesn't seem to load the screen turns off?
Secondly, the battery meter in W7 disappeared, went to turn it on again and it is grayed out. I have no idea why it does this?
Any help would be great, because I don't want to have to wait for PC World repair or replace.
Thanks in advance for any help!
Hello
It's probably not what you want to hear, but the fact that you have to wiggle the plug adapter seems to indicate a hardware problem and I do not think there is a software solution to this problem - I would really recommend get it fixed by the retailer, while your machine is under warranty.
Best regards
DP - K
-
tried to allow fixit Center repair a codec problem. Says that he does not support?
When you play, my system hangs. I got an error that says I have to disable my cyberlink demultiplexer codec, because it was causing problems. How can I do this?
Hi PatriciaLee,You can uninstall the codec (CLDemuxer.ax) to add or remove programs.You must have an administrator account to uninstall a program.
For more information, see:
-
Try to get a trial of CC photoshop but Adobe say I need to update Safari.I am running Safari 9.0.1. It can't get more recent. I'm on OSX El Capitan 10.11.3 but it still won't let me download a trial version.
You can try to reset your browser, and try to install Adobe Creative Cloud and share the results.
-
imove update now says my imac does not support hardware acceleration
What should I do? It won't let me run the program
Well, it suggests that your Mac is too old. What model iMac do you have, what version of the operating system are you using and what version of iMovie were you before and try to use now?
Geoff.
-
Battery - plugged in, does not support
Hey,.
I bought my laptop 13, 14 months ago...At the beginning, it appears 'Low battery' on the 15%, then new attention to 10%, then it turns off automatically.
But since the past 10 years, 15 days my laptop charging time decreases every day...
I noticed, 10,12 days ago, it was usually stops at 25% without showing any message "battery low"...
After a few days, it starts to stop 40% without warning, and then again after a few days it starts to stop at 60%...
(Originally my laptop take until 01:30 hours for 100% charging, but after getting in this situation, my load time is also reduced, as when it was stop at 40%, when I plug in, it will load entirely whitin half an hour and at 60%, charge time is more diminished and get completely loaded only in 15, 20 minutes..)
But nowadays, laptop turns on only when I plug (and showing, hip, does not support) and down I took out. I checked by removing the battery and connect the charger, laptop works very well and can easily log on windows without battery...
Someone please, detect and specify the problem and kindly let me know the Solution.
Thank you HP...!Computer laptop specifications:
Battery information:Well you could go on eBay and ask for part number hp or order it from hp.
It's easy just take your battery and search search for model number on eBay but if ur stuck ask hp.
-
Dell Inspiron M5110 battery says plugged in, but it does not load
just got my counter M5110 & battery for dell inspirion says connected but does not support. How can I fix?
Hello
Thank you for contacting Microsoft Community.Did you reboot your PC then were? If it fails, remove the battery after turning off the PC and the attempt to insert the battery and check for the load.If it fails, go to the settings of the BIOS (press F2 during the Dell screen on startup). Check if the charing is disabled or enabled. Turn it on, save and exit settings.If that fails also, turning on the PC with the battery and charger connected and turned on. Now directly remove the battery and then insert it again after a few minutes.If this also fails to solve the problem, contact Dell support for assistance. -
Once again microsft 7 uninstall and reinstall problems Impossible to uninstall to reinstall it says error language does not support my system... then if I try to put the disc reinstall it says error during installation and just one button close... help
Please repost your question in the section group of Office documents Word to: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.word.docmanagement&lang=en&cr=US where issues of speech specialists will be more than happy to help you with your problem.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
"Your browser does not support iframes, please use a different browser.
I take an online course and this message appears when it is time for me to take my comments to the chapter.
While I'm able to pass the test, I can not press 'continue', so I can't submit my test results.
At the bottom of the control box it says "your browser does not support iframes, please use a different browser."
My OS is updated, I upgraded to Adobe Flash and Reader, but I have no idea how to solve this problem. I really need to be able to present my test results and unfortunately I lost several hours trying to figure this out.
Safari supports iFrames. The problem is the web site. Contact them for support. Or download a browser like Opera or Dolphin kick in one of those web site
-
Scanner does not support presets with Windows 7 driver
A Dell with Vista, Brother MFC 8500 and Adobe Acrobat 9 Standard
A new Dell with Windows 7 (64-bit) and even Adobe Acrobat 9 Standard even Brother MFC 8500
When I try to create a PDF file in Acrobat using the scanner he says that scan does not support the predefined settings.
Brother does not offer a driver for this MFC 8500 which is a workaholic that I love. Brother, said that the driver comes standard with Windows 7.
Whenever I want to create a PDF file that I have to use the custom page size and set, printer, IPR every time. I really want to configure predefined settings as I used with Vista so I can't go through all this pain to choose the details (each time) I will use 9 times out of 10.
Someone has an answer for this? Is this a setting?
Thanks a lot if you have the answer.
Hello
We suggest you to run the program in compatibility mode with Windows 7. To learn more about compatibility mode, you can refer to this link.
Let us know how it goes.
-
This host does not support VT *.
I get the message: "this virtual computer is configured for.
64-bit operating systems. However, 64-bit operation is not
possible. This host does not support VT continue with 64-bit support"?
If I don't answer him then continues to try to start the virtual machine but cancel then with "the task was canceled by a user" even if I don't cancel anything. If Yes, well, after validation, and attempt to start the ISO XP it says "this processor is not compatible with x 64 mode. Please install a X 86 32-bit operating system. »
That's what I get every time I turn on a virtual machine where I'm trying to start a 64-bit XP ISO file so that I can install XP 64 bit on it.
I am running 4.1 on a 64-bit VM ESX (Redhat Linux 5 64-bit) of VMWare Workstation v7. I tried Windows XP 64-bit and other flavors of
Linux 64-bit but same problem with all of them.
My physical pc consists of: CPU Q6600 (which supports VT). The mobo is P5E - VM HDMI and VanderPool (VT) with XD bit set is enabled in the BIOS. It is running
to 3.60 GHz.
So I can't install any 64 bit OS because it tells me that my pc ESX 4.1 VM does not support VT... I started in its virtual bios but there is no parameter VT it. Yet, when I boot ESX with the preferred Mode of CPU Intel VT-x/EPT or AMD-V/IVR value I get a message bit on the right down saying: "this host does not support the EFA. For material aid to virtualization with MMU software. "So I don't know that he sees VT during startup of ESX, only virtual computers created in ESX do not seem to see it.
I have already added the following in my vm ESX 4.1 .vmx file:
guestOS = "vmkernel".
monitor_control.vt32 = 'true '.
monitor_control.restrict_backdoor = 'true '.
I tried also to add the above in vmx file XP 64 bit VM as well. Any ideas on how I can install a 64 bit OS in a virtualized 4.1 ESX? Or it is not possible?
yorkman.
you run nested ESX. In ESX ESX. You can install 32-bit operating systems in this type of environment. VMware has no VT support for nested VMS
Maybe you are looking for
-
Hello world recently my disapear hotspot for other devices and can not connect not connect with laptop computer, Besides he worked wel Yesterda suddenly stopped working and can connect again; t) Really I need your help :)
-
How can I retrieve my security question answers
I'm trying to get the answers to my security questions
-
Measure the period and the peak value at crest of a sine wave
Hello I am new to Veristand and Labview and I was wondering if there is the possibility to do the following: I would like to measure the period of a sine wave that I capture from analog input of my data acquisition (SMU-6363). Apart from that, I also
-
HP OFFICEJET PRO 8600 PRINTING GIBBERISH AT WINDOWS STARTUP
Hi all! My name is Steve and I have a question. I apologize in advance if I'm duplicating this question from another thread. Our office has 3 computers connected to a router. The HP Officejet Pro 8600 is connected to the network. There is a problem w
-
Original title: when I start my windows live mail. He asks me if I want to go online? Then, I get this error message? just started doing this yesterday? There was an error when you attempt to connect to the Windows Live Calendar service. If the error