point to label on the chart

Similar Questions

• Can charting CF - I make positive negative labels in the graph horizontal bar?

  I use ColdFusion 7 on solaris 8.

  I'm creating a tornado with a horizontal bar graph chart to display two sets of accurate, except cards

  series is to the left of 0 and a series is to the right of the zero and each series is stacked along the same line.

  Can I do the label values negative axis on the left side of the show of the axes of the graph in the form of positive values label?

  This is a very rustic representation of what the table looks like:

  * * * * * | (- 5 to + 5 to the right, left)

  * * * | (- 3 left, 3 right)

  * * | * (- 2 left, 2 right)

  * | *

  -----------

  -5-3 0 3 5

  I want the table to stay as is, but have the bottom label to show that:

  5 3 0 3 5 (essentially removing the "-" sign on the left side of the labels 0)

  Well, thanks for any help anyone can provide!

  * Here is a snippet of code for the chart:

  < seriesplacement cfchart = 'stacked' chartwidth = "350" chartheight = "200" showlegend = 'no '.
  scaleFrom, scaleto = '-5 "= style="./hzBarStyle.xml '5' "fontbold = 'Yes' format ="png">

  < cfchartseries type = "horizontalbar" > <!-left-side bars on the graph of tornado >
  < cfloop query = "getReportVals" >
  < cfset dataVal = - #round ((getReportVals.score/score_total) * 100) / 2 > <!-Note: sign-less >
  < point cfchartdata value = "Point #dataVal #." = #dataVal # >
  < / cfloop >
  < / cfchartseries >

  < cfchartseries type = "horizontalbar" > <! - good sidebars of the tornado chart - >
  < cfloop query = "getReportVals" >
  < cfset dataVal = #round ((getReportVals.score/score_total) * 100) / 2 > <!-Note: no less-> signs
  < point cfchartdata value = "Point #dataVal #." = #dataVal # >
  < / cfloop >
  < / cfchartseries >

  < / cfchart >

  * Here's the style developed using WebCharts Ent file. Edition v5.0h:

  hzBarStyle.xml

  ******************

  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < frameChart is3D = "false" >

  < xDepth = '6' yDepth plan '6' = frame = "#000000" lightColor = 'white '.
  leftAxisPlacement = rightAxisPlacement 'Front' = stripColor 'Front' = "#FFFFFF" >
  < background minColor = "#999999" / >
  < / framework >

  < dataLabels style = foreground "Pattern" 'white' = >
  < / dataLabels >

  < elements place = 'Stacked' form = contour "Column" = "black" >
  < morph morph = 'none' stage = "none" / >

  < index collection = "0" >
  < paint color = "#0000FF" / >

  
  < dataLabel >
  <! [CDATA [$(colLabel)]] >
  < / dataLabel >
  < / series >

  < index collection = "1" >
  < paint color = "#0000FF" / >

  
  < dataLabel >
  <! [CDATA [\t]] >
  < / dataLabel >
  < / series >

  \n\nTotal $(colLabel) value: <! [CDATA [$(rowTotal)]] >
  < / items >

  
  < isVisible xAxis = "true" >
  < labelFormat pattern = "#, # 0" ###" / >
  < parseFormat pattern = "#, # 0" ###" / >
  < labelStyle orientation = "Vertical" color = "white" / >
  < titleStyle foreground 'black' = > criteria for data < / titleStyle >
  < / xAxis >

  < foreground popup = '#000000"background ="#FFFFFF"/ >

  < legend >
  < style decoration = "RoundShadow" / >
  < / legend >

  < title >
  < style decoration = "None" / > Tornado Chart
  < /title >

  < paint = "Plain" / >

  < / frameChart >

  The display is controlled by a ground impossible.

  That is to say "positive format; negative format.

  Unfortunately, the javadocs say positive and negative models must be different or the negative trend will be ignored. Probably the best you can do is to replace the '-' with another symbol.  A space character * might * work

  .. If not, you may need to use some other character as '+' or ' * '.

  Just be sure to apply the format to the correct axis.

  Post edited by: == cfSearching == -.

• How to adjust the chart at some point?

  Hello forum.

  I cut some parts of a chart of mixed signals with a slider. I have to be able to cut before and after the cursor to some given points (selected manually). Is someone can you please tell me what I need to do? I can't find all the functions related to the Cup.

  Thanks in advance.

  Serban

  Hey, Serban,.

  I found a piece of code that looks like what you are willing to do about it. Basically, you move two sliders on the top graph to change the graph on the bottom window.

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4308

  From a programming perspective, it takes the cursor to the position of the top of the graphic page properties and apply like the min and the properties of the max scale as on the chart at the bottom.

  Logan H

• Symbolic notation on the chart MS2009 axis labels?

  I use Measurement Studio 2009 (c#) to display graphs of waveform.

  Question: How can I format the labels to the major division of a XAxis (or YAxis) such as:

  -A value of 1000 will display "1 k".

  -A value of 0.001 will display "1 m".

  -etc.

  I'm looking for is equivalent to the following where Studio 8 (C++)

  -CNiAxis::FormatString = "k".

  -C' was called "symbolic notation.

  I looked in. MajorDivisions.LabelFormat but I'm not quite sure what do what I'm looking for.

  Any advice would be greatly appreciated.  Thank you.

  You should try something like:

• Change of name of the chart [node property-label]

  I wish that the names of "check box" (cluster) which will be appear as a label (name) on the graphs, as pictured; "» I try to implement this piece of property-> name of the plot; but was always a problem that does not work or there show the error that I can't change right now run my program. Program is attached.

  

  You must extract the control labels in the cluster. See attached extract.

  

• Add the label of the axis to a chart in the report of the word

  Hello

  Is there a way to add a label to the axis of the graph in a word of the report? Thank you!

  Tom

  It is of course not very intuitive to use the word graphic Set make vi to set the label of the scale.

  Use xlCategory and title of entry to affect the scale label x and use xlValue and title of entry to set the label of scale there.

  It would have been nice and easy to add an entry to set the orientation of the text (just adding an argument in the node of the axis title property).

  Ben64

• How do label you pie charts in excel 2103

  How do label you pie charts in excel 2103

  Hi Tommy:

  Thanks for the response, but still the problem with multiple labels of legend.  The link mentioned only a single label legend on a pie chart, which was not a problem.  This is labelling the other elements of the 5 the chart legend.  There are currently 1 label with the other points being blank.

  Thank you

  Robert

  Once again...
   
  He must ask these questions in the forums Microsoft Excel - those who are SPECIFICALLY for Excel issues.  In other words - 'experts' who hang there are expert in Excel.  You get people in this forum who are more into the OS in general - maybe a few application expertise sprinkled in here and there - but if you want someone who lives and breathes "Excel" - more likely to get in a forum dedicated to it.  (Click on the link, after a new question and I would say SEO - with a link - this conversation too!)
   
  Link to this conversation:
  How do label you pie charts in excel 2103
   
  This could be a start (Google search or even looking for the page that I linked works you original very well, apparently...)
  http://www.excelforum.com/Excel-charting-and-pivots/811351-multiple-data-labels-on-bar-chart.html
   
  But then again... You should ask such questions in the forums of Microsoft Excel<-- they="" will="" more="" likely="" be="" able="" to="">

• Label all the bars with cfChart

  I have some graphs made in CF 5 with the cfgraph and I need to pass them to cfchart for CF MX 7. In the cfcharts, all bars are labeled, but it labels only a few bars in cfchart. It's a HorizontalBar and I need the labels on the left side of the chart for all of the bars. Currently, there are 10 bars, but only 4 are labeled on the left. If I click on the graph and then mouse over the bars it will give me the name, so I know that I get the correct names of the query. Can someone shed some light on this or point me in the right direction. I hunted all over the internet for how to do this, but I had no luck so far.
  Thanks in advance,
  CJ

  Quote:
  Posted by: CJ
  query - lines: 10...

  OK, save the attachment part, 1, as HorizontalBarLabelFix.xml in the same directory as your cfchart file.

  Then change your code cfchart to the added party, 2.

• change orientation on the label of the axis in Excel

  Hello all-

  I'm trying to use the report generation tool to make an Excel report.  I have a chart, and I want to rotate the label for the vertical axis so that it is vertical!  I can add the label, but it is by default in the horizontal, losing too much space...

  Any ideas?  (Knowing that I have very little knowledge of VBA or ActiveX...)

  -GN

  I'll try to drive on the right track.

  Open NI_ReportGenerationToolkit.lvlib:Excel_Set_Scale.vi and expand the axis class to display additional properties.

  In the attached doc, I show the AxisTitle class and you can see the Orientation property (I think this is what you need).

  Good luck

• Display of numerical values (labels) on the graph

  Hello

  I've searched for a while but cudnt find a solution. I showed a chart on the chart. Now, I want to show the numerical values of the

  table points on the graph so that I don't always have to use a cursor for the XY coordinates while moving on the chart. How can I do?

  Searching on the forum I found, it can be done with waveform graph. We can do with graphics as well? In Microsoft excel, the option is there for that.

  Thanx.

  Here you go, LV (untested) 8.6

• Is it possible to delete a plot with the help of the mouse select the chart control?

  For example, when I use the plot to draw thousands of lines on the chart control, I want to delete some of them, but there are thousands of generated plotHandle.

  How can I get the plotHandle of the specific line on the chart control with the help of the mouse to select the option?

  If I save the information from the lines, such as the plotHandle and the coordinates on a table or list, etc, I compare information lines for the plotHandle of the specific line.
  Is it all a user-friendly way to remove a track selection on the chart control?

  I can't give you a reasonable way to solve this problem, since as you have already noted plot do not snappable plots.

  A possible warkaround would be to replace the plot of individual instructions with a PlotXY matching with 2 bays 2 points each, which correspond to the x 1, x 2, y1, y2 parameters to plot. PlotXY plots are snappable, so you can enable this procedure select the plot and remove it.

• How do you control the number of cycles showed on the chart

  How do you control the number of cycles showed on the chart?  I selected a graph of scanning, and I do not see the bar vertical chart when the program runs.  This is probably because I don't see the whole cycle of the periodic signal I try to display.  I need to set the graph to display several cycles.  Any help will be greatly appreciated.

  Right-click in the list and set the required number of points in the history buffer (right-click... length of the graphic history...). Then set the x axis not autoscale and cover your historical range complete.

• Problem formatting Scatter the chart axis

  All,

  I'm trying to format axes on an XY scatter chart to display 0.0% vertically and horizontally to OBIEE 11.1.1.7.140527 0,0. I tried to set the format in the properties for chart point as well as the properties of column cloud (using these two formats appear in the list and the custom) and none of these approaches to return the correct format. The numbers keep appearing without formatting - that is, 90.0% appears to be 90 on the vertical axis. Also as a record, when I fly over the points of real data on the graph, the values are made 1 decimal place (so I know that they are not truncated), but the % does not appear after the vertical data point.

  Does anyone else have this problem? If so, how to solve it?

  Thanks in advance for your help.

  Thanks for the photos (make it easier to visualize exactly what you are looking for).

  The strange thing is that I'm trying now to build a chart like yours, and all defining the format of my vertical measurement in % place you in the y-axis % and keep the axis X for normal numeric values.

  And I also found (mistakenly) where you can force the graph to display the % on axis Y.

  

  There is a problem during the definition of % in the property "Abbreviations": your measurement is 0 = 0 and 1 = 100%.

  If on the other side, that get in shape column or a percentage in the criteria tab measurement is 0 = 0%-100 = 100%.

  

  I use exactly the same as you, OBIEE and defining the format of data in the criteria for my Chronicle of the axis tab of Y of the clouds of points automatically graph showed me the values of %.

  

  There is an additional "detail": you lose % if you don't have a column in the 'Points' of the graph area, but you moved your column to "vary By color.

  If bring you a column 'Points', the % will be on the Y axis, if you have a column only in the "color vary by" you lose %. You can get them back by using the properties of the axis, but don't forget to add a 100 to your measurement (and on the mouse on the screen data will be skewed as it will show % 0-1 instead of 0 to 100).

  So I suggest to add a second instance of the same column that you use in "color vary by" and put in the area of 'Points '. % will return and you keep multiple colors. On screen, a mouse you have twice the same value on the screen, but it's probably smaller questions that you can live with if you get your good axis.

  

  (PS: I hope that makes sense...)

• Write name of series in the chart to the report area

  I have a sample application created for my use and its accessible via the link

  https://Apex.Oracle.com/pls/Apex/f?p=78540:1:106638818610570:

  Username and password is apex_global / apex_global

  workspace: SHASAPEX

  I'm doing an exploration down to a region of the graph to a regional report and when I click on my bar diagram - I want to be able to pass the name label and the serial in my region to report (Variables) - so in my example - I'm hoping to spend say - JUL-14 and eligible Evergreen when click on the blue bar in the region of JUL - 14 , then through java for the link action script, I do an update of my region to report after you have defined the required hidden items

  But I don't know - how to pass the series name of my table for the report region - as of now, I have a javascript function to do a pop up of my values passed which shows JUL-14 and 2 when you click on my region example

  Thank you

  S

  Hi Jeff / Mihai,.

  Just thought to share my discoveries - has been able to make it work as I wanted (i, e - one query with several series of that) and then click for the series name to dig another report

  The reason why this is essential, what I need where I don't know how much of series I'm going to so I'll construct my SQL in a function and return to the region of APEX - this way atleast I would like to know which series is clicked, and I would have to factor the name of set of real criteria SQL into sql report child I did ,

  I updated my original with her test area if you want to take a look.

  Basically, we need to make a listener on the loading of the page that looks something like (Note: here in static chart region ID is RG1_EVGEXP_BAR)

  AnyChart.getChartById($("#RG1_EVGEXP_BAR_chart object").attr("id")).addEventListener("pointClick",function(e){
    console.log(e);
  showChartPopup(e);
  });
  

  And a separate java script which binds the name of the series and then update my report region is.

  function showChartPopup(pEvent){
  alert(pEvent.data.Name);
  alert(pEvent.data.Series.Name);
  clickEvgExpBar(pEvent.data.Name,pEvent.data.Series.Name);
  }
  
  function clickEvgExpBar(pLabel,pValue){
     $x('P1_R2_PERIOD').value = pLabel;
     $x('P1_R2_EVG_ELG').value = pValue;
     $('#R2_EVGEXP_CAT_DTLS').trigger('apexrefresh');
  }
  

• Calculation value of axis based on, click in the chart area.

  Hey there, I'm still working on my graphic feature and so far I've been able to get help on these forums.

  I need to be able to calculate the values of the corresponding axis in a click in the chart area. I see no real utility method in the NumberAxis class which will help me to do it. The only thing I can think is to get the bounds of the array and that relate to what I know about the range of the values I put in.

  It is a line chart with two NumberAxis. I want to display on click, (x, y)-value as PR. the axis of the point clicked. Is it possible that I can do this easily, or I just need to design a work around?

  Yes, it's a little tricky, but not too bad. It would be probably good for XYChart have public X getXValue (Point2D) and the public methods of getYValue (Point2D) Y. This works, however:

  import javafx.application.Application;
  import javafx.event.EventHandler;
  import javafx.geometry.Point2D;
  import javafx.scene.Scene;
  import javafx.scene.chart.LineChart;
  import javafx.scene.chart.NumberAxis;
  import javafx.scene.chart.XYChart;
  import javafx.scene.input.MouseEvent;
  import javafx.stage.Stage;
  
  public class LineChartSample extends Application {
  
      @Override
      public void start(Stage stage) {
          stage.setTitle("Line Chart Sample");
          // defining the axes
          final NumberAxis xAxis = new NumberAxis();
          final NumberAxis yAxis = new NumberAxis();
          xAxis.setLabel("Number of Month");
          // creating the chart
          final LineChart lineChart = new LineChart(xAxis, yAxis);
  
          lineChart.setTitle("Stock Monitoring, 2010");
          // defining a series
          XYChart.Series series = new XYChart.Series<>();
          series.setName("My portfolio");
          // populating the series with data
          series.getData().add(new XYChart.Data(1, 23));
          series.getData().add(new XYChart.Data(2, 14));
          series.getData().add(new XYChart.Data(3, 15));
          series.getData().add(new XYChart.Data(4, 24));
          series.getData().add(new XYChart.Data(5, 34));
          series.getData().add(new XYChart.Data(6, 36));
          series.getData().add(new XYChart.Data(7, 22));
          series.getData().add(new XYChart.Data(8, 45));
          series.getData().add(new XYChart.Data(9, 43));
          series.getData().add(new XYChart.Data(10, 17));
          series.getData().add(new XYChart.Data(11, 29));
          series.getData().add(new XYChart.Data(12, 25));
  
          Scene scene = new Scene(lineChart, 800, 600);
          lineChart.getData().add(series);
  
          stage.setScene(scene);
          stage.show();
  
          lineChart.setOnMouseClicked(new EventHandler() {
              @Override
              public void handle(MouseEvent event) {
                  Point2D xAxisInScene = xAxis.localToScene(new Point2D(0, 0));
                  Point2D yAxisInScene = yAxis.localToScene(new Point2D(0, 0));
                  double xInScene = event.getSceneX();
                  double yInScene = event.getSceneY();
                  double x = (xInScene - xAxisInScene.getX()) / xAxis.getScale() + xAxis.getLowerBound();
                  double y = yAxis.getUpperBound() + (yInScene - yAxisInScene.getY()) / yAxis.getScale();
  
                  System.out.printf("[%.1f, %.1f]%n", x, y);
              }
          });
      }
  
      public static void main(String[] args) {
          launch(args);
      }
  }