PopUpManager.remove () does not work
HelloI'm developing an application that uses instances of TitleWindow to display information. I had problems with pop - up in which clicking the 'closeButton' has that a noticeable effect, it no longer responds to drag events. It would be okay if the instance were not as visible. The popup is placed in a canvas container, don't know if it's hit or not. I finally managed to make this work, it is interesting by removing the < mx:Style > element of the main application mxml file. The complete code, using a smaller example, is attached. Any explanation would be greatly appreciated. Still more appreciated it's tips on getting in fact it works as I would that he (i.e., with the style).
See you soon,.
Rich
Thanks to all for the replies. Turns out my problem have to do with setting incorrectly the parent of the pop-up window.
In BrokenPopup.as, dragDropHandler(), instead of using the PopUpManager I ended up adding the new BrokenPopupComponent object as a child of the object Canvas container identified as 'popupCanvas' in BrokenPopup.mxml. Not sure why the original implementation did not work properly, but I want the popup to be a child of the canvas and PopUpManager does not appear to support.
Once again, thank you for the answers.
See you soon,.
Rich
Tags: Flex
Similar Questions
-
Uninstall Microsoft Works 2003 on XP. I have the original installation disc. I want to install Office 2010.
You can uninstall works to add/remove programs in Control Panel, look for work 2003 and uninstall.
-
Property of VMware Workstation 8 serial number does not work
Hello
I used to install WS7 issuing a command line like this:
VMware Workstation.msi"/ qb! /norestart ADDLOCAL = ALL DISABLE_AUTORUN = 0 QUICKLAUNCH_SHORTCUT = 0 USERNAME = "xxx" COMPANYNAME = "xxx" SERIALNUMBER = "xxxx".
Now, SERIALNUMBER has been removed from the msi properties table.
Is it possible to have a solution for this other than the registration of import reg file?
This issue has a lot of visibility with the devs, and we are working on implementing this properly in my computer. For 8.0.1 users are able to configure shortcuts, port pass, serial key and persist / remove settings from the workstation through the command line, but we still have more work to do. Still, some settings do not work and are not passed through. Currently INSTALLDIR and the features of REMOVAL does not work.
But, you can indeed install w / serial number in the installation in silent mode starts now with Workstation 8.0.1.
VMware-workstation-plein-8.0.1-528992.exe/s/v SERIALNUMBER = "xxxxx-xxxxx-xxxxx-xxxxx-xxxxx" works when it is run from an elevated command prompt.
-
I have two versions of the same book on my iphone and ipad, which are not synchronized with the other. I want the same book on each device, so I can study on one or the other. I tried to remove the books on my phone, ipad & itunes and start again. It does not work. Help.
Hello david.hogan87,
Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.
Have you checked every device to confirm that the same identifier Apple is signed all three?
iPhone and iPad: head to settings > iTunes and App Store
iTunes: on a Mac, it's under account or installed depending on the version of iTunes store. On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.
If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.
Best regards.
-
Question
better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
DetailsIn current versions of Flash you can also do this via the control panel.
- Control Panel > Flash Player, click on remove and erase data
-
The OLD advice for this problem, listed below, does NOT work. Web addresses just do not detach:
1) click the arrow located on the right side of the address bar of Firefox. A list of URLS will come down.
(2) place your cursor on the URL that you want to delete manually.
(3) press and hold the "shift" on your keyboard. Then, press the "Del" key The URL highlighted is removed. Or I have been advised to hold the 'Ctrl' key Neither work.
There are a few new instructions, updates on how to remove the unwanted drop web addresses. Everyone?
Hi, if your problem is removal of the history of the site. Click on the firefox menu and go to history-> history-> click history on the left side of the window. Now you can remove unwanted Web sites from the list.
If you want to delete bookmarks fallow the instructions remove bookmarks -
I'm on windows 7 and I've upgraded to the latest version of firefox, and now it will not open. I completely deleted firefox and transferred again, and it does not work. Then, I was that he could get through my firewall, and that has not worked. So my last attempt, I removed firefox 10 again and downloaded the beta version hoping that would make it and once again, nothing. It opens at all. Please help - y at - it a live chat or a number to speak to someone at Firefox?
-Microsoft got a big update last night for the Windows 7 and I came this morning I was wondering if the update would help my FireFox. I thought it might because a lot of things in this forum said it was a security problem and they have been updated with security updates. SHAZAM! Firefox is now the new my browser to goto. Very happy to resume. Once more I did anything this morning, but click the icon after the big windows 7 update and we're back in business. Thanks for all your help!
-
Add/Remove Programs does not work with some programs in XP
Why add and remove program does NOT work on some programs. These are programs on a computer that was created using a process of the image. Like ghost?
If you have a third party app that will not uninstall, I think I might check the support page for this application and see what they have to say about it.
Some AV products have obtained quite complicated that add/remove programs is not the recommended way to remove them, so some companies have developed their own removal procedures and some have special programs to manage their affairs.
Norton/Symantec has a special page for you:
http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080416133836EN
I see that just goes through Add/Remove programs too, but there is an option "what happens if it does not work" too (or post in the forums).
-
Hi all
Need help
Hp5510 locked
I works fine when connected to my laptop - but-not when it is connected to Compaq Presario desktop mu
Software removal - tried reinstalling. Failed to install. printer Message "print spooler does not work - what's up."
↑ hanks
Scott
Consult HP printer experts found in the HP printer Forum.
-
The difficulty it Center Microsoft said that my serial cable using IrDA protocol does not work properly.
Appreciate any suggestions on how to solve this problem.
Steve Stephens, * address email is removed from the privacy *.
Hi, Steve Stephens.
Did you run the fixit available in the link below?
Hardware devices do not work or are not detected in WindowsMethod 1: Check for any error message in Device Manager
When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:
(a) open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
(b) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(c) in the Device Manager, find your device, and then double-click the device name.
(d) If an error code has been generated, the code appears in the status area of the device under the general tab
Method 2: download and install all available Windows UpdateInstall Windows updates
http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updatesMethod 3: Download and install SP2
Learn how to install Windows Vista Service Pack 2 (SP2)
http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2 -
I am running Vista Home premium, IE8, the latest version and after what Adobe says since I have problems with Flash Player. According to them, is not compatible with IE8, so they came out with this beta. It does not work! I am always prompted to load Flash Player for windows! Can I go back to IE7 and delete the others and the version beta and regular old flashplayer? Please help, that's all what I do perform, even Facebook is messed up because it requires flashplayer. But it seems that Windows does not recognize the flash drive I have loaded in beta. Does anyone know where I come from? I can also be reached at * address email is removed from the privacy *.
Thank you very much!
http://support.Microsoft.com/kb/957700
How to uninstall or remove Internet Explorer 8?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Try this:
http://kb2.Adobe.com/CPS/141/tn_14157.html
Uninstall Flash by using the uninstall program Flash Adobe link above.
Flash is sometimes corrupted.
http://get.Adobe.com/flashplayer/?promoid=BUIGP
Reinstall Flash, after 1st unchecking / uncheck the toolbar Google download option there.
All other questions: Contact Adobe.
See you soon.
Mick Murphy - Microsoft partner
-
I want to remove the portion of these legs inside of this graph, because a white circle solid at the Center intensifies the effect of the spiral.
Background, the spiral is a mixture of the people flying around in a circle. The circle is then copied and turned several times. I have not developed the appearance again.
There must be an easy way to do it, but I can't use the Pathfinders, the opacity mask, knockout groups, and make simple layers does not work. I just want to axe the legs of these easy people!
This is not correct
I do several models and want to find a way to make it easy and fast!
Thanks to you all!
Emmanuel,
If I (put) correctly, you should be able to get the opacity mask to work as follows:
Select (only) the White path and the mixture and then in the transparency palette flyout on create with unchecked Clip opacity mask and mask invert checked.
Who must hide the inner part of the mixture corresponding to the white circle and let the front remains visible oin the background (circle and all that.)
.
-
I want to uninstall the application, because it does not stay charged and want more on my computer and not perform the steps for removing it, but none does not work for me.
Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday
Sign out of your account... Uninstall... to run vacuuming...
-http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
-
? I can't open my apps in creative cloud; whenever I get trial versions and the question to purchase. But I am a member for several years now. We have already removed all apps and installed them, but it does not work. What should do?
-
I have a serial number for CS6. but it does not work. I noticed that there are several versions of CS 6. I downloaded 'standard design', but it did not work. Which version goes with serial number [removed]?
Thank you
Bill Heinsohn
Check your Adobe account online. If you have registered the software version should be shown there.
Never share your serial number publicly... anyone can use it.
Maybe you are looking for
-
Can I create several libraries of Photos Apple?
I have thousands of photos of archives from different eras that I like to keep classified into separate libraries. Is this possible without complicating the iCloud automated Photo Upload feature that I use for the contemporary family photos?
-
I just purchased a dv6 from best buy 3025dx and took to implement. Because I don't like the bloatware that comes on laptops, and I have a copy of Windows 7 Ultimate x 64, the first thing I did was a clean install of windows. I was not aware of what
-
GridFieldManager encapsulates no text at the end of the screen
Hi all I've implemented a GridFieldManager in my BlackBerry (OS 5.0) application. My GridFieldManager contains 5 rows and 2 columns. The first column contains an image of the ball, and the second column contains text. For some reason, the text is
-
I'm new to Blackberry. I just can't stand the keys that make noise! Everytime I try to dial a number the keyboard makes a noise! I want to have a silent keyboard. But nowhere on my phone using, or on-site support and services can I find an answer to
-
I need to set up a local network with 6 computers having windows xp now works. All of them use a custom software that runs only on 32-bit operating systems. Now our branch is coming where it would have more than 6 computers that need to connect to th