Port 25 to 587 for SMTP application NAT

Similar Questions

• IR hotsync problem: "because the port is in use by another application."

  I finally got my system operation.  Sony Clie TJ - 25 pda, Palm Desktop 4.1, Windows 7 64 bit.  Very delicate balance.  I failed to install the new software released by aceeca.  I finally got it by infrared hotsync.  Several times.

  Now, today, I get the message on the Clie: "could not start the hotsync operation because the port is in use by another application."

  I saw this thread and in fact ensure that the transfer of images using a digital camera box is unchecked.  It still does not.  The icon hotsync in the lower right part of the screen, when I check that IR is checked, nothing else is.  It still does not.

  Thoughts?  Ideas?  Suggestions?

  Cidercat I had this happen to me with bluetooth hotsync before. I listen to radio, transfer files and surf the web with bluetooth. I could solve the problem by turning off the bluetooth, then turn it back on. Sometimes a warm reboot might also work. I came across a free application for the Palm tree named NetworkDown. It closes completely all active sessions down. You type right on the icon to run it. It works on my TX.

  http://www.metaviewsoft.de/en/software/PalmOS/freeware/other/NetworkDown.PRC

• How can I get the installer for my application check the operating system type and then install the correct driver type?

  I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.

  Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.

  Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.

  Thank you
  Joe

  So, I make it work!

  The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:

  http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.

  It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.

  According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.

  It turned out to be as simple as that.

  I hope this helps someone.

  Joe

• Apex 5 on PDB not work. works very well on the root - ERR-7620 could determine no workspace for the application (4500)

  Hi all

  I recently installed Oracle 12 c and Apex 5 on a new server.

  My apex 5 installation went well. I can access it without problem at the root on its default port 8080.

  Later, I created a new pdb file (cloned from pdborcl) and created a new schema.

  as sysdba, I started a new instance of the Apex on port 8888, but when I try to access it through the http://IPAddress:8888 / apex / or apex / http://IPAddress:8888 / apex_admin I get an error (see pictures below)

  Can someone tell me please in the right direction.

  Should I do an install fresh apex 5 on the PDB? I thought that if I installed as sysdba on the CBD, the pluggable DB would inherit apex 5. Help, please

  ERR-7620 could determine no workspace for the application (4500)

  ORA-01403: no data found

  
  

  (DOES NOT NOT ON PDB)

  

  
  

  (WORKING ON ROOT)

  
  

  
  

  
  

  Hi John,.

  What you said is exactly the problem you will encounter if patch 20618595 of the database is not applied before the APEX upgrade to 5.0. In addition to the opatch apply the approach, you also run $ORACLE_HOME/OPatch/datapatch? At run time, you guarantee that all-ins databases have been opened after the start of the database to the top by issuing alter database connectable to all open?

  Finally, you have indicated that you have installed it on a new server. Is your main interest just to have a new 12 c CBD with APEX 5.0 in it? If Yes, you can do the following to avoid the problem you are experiencing currently.

  (1) create a new 12 c CBD

  (2) connect SYS as SYSDBA to CBD$ ROOT and launch a 4.2.5 or newer version of apxremov_con.sql. If the database that you created in step 1 is 12.1.0.2, you can just use $ORACLE_HOME/apex/apxremov_con.sql

  (3) connect SYS as SYSDBA to CBD$ ROOT and run apexins.sql from the source 5.0 specifying positional parameters, as you normally would

  Kind regards

  Jason

• Why do I receive alerts in iPhone mirror on my watch for an application for which I turned off mirroring alerts iPhone?

  Why do I receive alerts in iPhone mirror on my watch for an application for which I turned off mirroring alerts iPhone?

  Watch OS 3.0

  iOS 10.0.1

  

  Hello

  You should find that restart both devices solves this problem.

  The two put together, and then restart your iPhone first:

  • Restart your iPhone, iPad or iPod touch - Apple Support
  • Restart your Apple Watch - Apple Support

• One volume for all applications

  Is there a way to define the Air iPad for a volume for all applications?  When I go into the music and YouTube, it seems
  always change and increase the volume.

  Thanks in advance.

  Hello. In fact change such volume indicated by the slider in the control center? Swipe up then left to see. I think that maybe it's just that the music is stronger, more deeply modulated. Not much you can do about it.

• If I have the first generation iWatch I'll be able to get the update for new applications and look at faces?  I know that I couldn't display or the waterproof function to the water.

  If I have the first generation iWatch I'll be able to get the update for new applications and look at faces?  I know that I couldn't display or the waterproof function to the water.

  Hello

  The next operating system update, watch OS 3, will be available for all Apple Watch models, including the first generation watches.

  We should go out on 13 September, after which it can be installed by following the steps detailed here:

  • Update the software on your Apple Watch - Apple Support

  More information:

  http://www.Apple.com/Watchos/

• I was charged for an application that was not mean to buy how I get my money back?

  I was charged for an application that was not mean to buy how I get my money back?

  Purchases are considered final, but you can try the page 'report a problem' to contact iTunes Support and see if they will refund or credit you: http://reportaproblem.apple.com

  Or you can try to contact iTunes Support via: https://support.apple.com/contact or https://www.apple.com/emea/support/itunes/contact.html

• I can't Turn off cellular data for any application.

  I have iphone 6 s more than 128 GB with the latest IOS 9.3.3. I'm not able to cellular data turn-off for any application. When I turn on my cellular data, all applications work with cellular data. Data on each app switch is turned off and I'm not able to cellular data turn-off for any application.

  Try to check your restrictions under settings > general > Restrictions.

• If I pay for an application and it does not work I would get my money back guarantee, please, thank you

  If I pay for an application and it does not work I would get my money back guarantee, please, thank you

  This is a user to user forum. You don't talk to Apple.

  You can report a problem with applications to http://reportaproblem.apple.com and request a refund as well.

• Apple has taken $16.63 my account for an application called Kings of Pirate and I do not have the game on my phone.

  Apple has taken $16.63 my account for an application called Pirate Kings. The problem is I don't have the game on my phone and I've never played the game at all. I recived an email with the front desk saying that I bought a few different things to the game at 6 in the morning on 07/11/2017 and to whom I was sound asleep. I don't think it's just that I want my money that I never brought anything off here

  < re-titled by host >

  Take a look at for help with an item purchased from the iTunes Store, App Store, Mac App Store and iBooks Store - Apple Support and also consider changing your passwords as well: change your Apple ID - Apple Support password

• This computer is no longer allowed for the applications installed on your iPhone

  I tried to sync my iPhone 6 more with iTunes in my MacBook Pro.  During this process, a window popped up that says, "this computer is no longer allowed for the applications that are installed on the iPhone" iPhone 6 more "." You want to allow this computer to items purchased from the iTunes Store? »

  I clicked on allow and another window popped up that says, "Enter Apple ID and password.  If you have an Apple ID and password. Enter them here. "(If you use the iTunes Store or iCloud, for example, you have an Apple ID.)  "You can authorize up to 5 computers for each Apple ID."

  Apple has recently replaced the logic board on my MacBookPro (early 2011).

  There are 3 iCloud Apple ID.  First of all, I allowed my MacBook Pro.  Then he asks the password of the Apple ID for my iPhone 4.  While I was still with my iPhone 4, there was a problem and Apple technology had me install a new Apple ID.    Then I was asked for passwords for the Apple ID for iPhone iPad Air and 6 more.  Then another pop-up window says, "the authorization of the computer succeeded."  "You have allowed 5 computers on your 5 available."

  This could be 5 'computers' if Apple still has the original map of the logic.  It is always 1 MacBook Pro, which has a new logic board and if I called the Apple Support, I guess the UUID hardware is Apple going to buy and I did that for this new logic board, but not for the old.  I would have thought when the old logic board has been subscribed by technology, he or she would have known in order to erase the original UUID for my MacBook Pro in the main Apple system and replaced it with the new.  BTW, the old logic board works great.  It was the video card that was bad and my computer has a problem to wake from sleep or boot.  Everything worked very well when I took it for repair, so technology might have gotten the UUID of the old logic board.  Since I'm not a computer tech, I'm probably missing something.  I don't understand why I had to do it all.

  So, how can I get this problem fixed then the old logic board is not counted?

  Thanks in advance!

  Note: where it is said to 'Select a category', 'importing & Burning in iTunes', was the closest I could come to picking a category.  If I posted this in the wrong place, please move to the community right and made me know.  Thank you!

  You need not do anything.

  If, in the future, you need a permit for a new computer, then just reauthorize all, then allow all of your active computers.

• How can I get Thunderbird to forget the password for smtp (I want to enter manually each time)?

  How can I get Thunderbird to forget the password for smtp (I want to enter manually each time)?

  In the menu Tools | Options | Security | Passwords - saved passwords

  Find and delete the required entry.

  When you are prompted for the password, make sure the checkbox for remembering it is erased.

  No menu? Press ALT.

• How can I change the privileges of sharing and permission for certain applications and software?

  I need to change the permissions and settings for sharing applications. I find the custom preferences not defined by myself as well as many of those who are don't give me "read and write" access for them. When I go to "get info" to change these settings, it says I don't have permission to make changes. How can I solve this problem and make sure that it doesn't happen?

  Nothing should write an application, so I don't know why there is a problem.

  Protection of the integrity of system (SIP) in El Capitan prevents you from changing all the apps.

  For preinstalled applications, the system must have a reading and writing and group / everyone should be read-only.

  They will also have an access control entry, "group: everyone denies delete" which will appear as usual in the window read the information.

  Install apps via drag and drop, you will probably have as owner with Read and Write, but the other group is going to be read-only.

• How can I disable the Google Maps message "Google has disabled the use of maps API for this application? This as Microsoft tries to crush Netscape?

  In the last day or two (8 August 2012) each time I start Firefox (14.01.01) I get a pop up that says "Google has disabled using the maps API for this application. He directs me to Google Maps terms & Conditions, but does not provide a solution to disable the pop up. I tried to disable Google Maps as an Add on Firefox, but still not the context menu.
  It is easy to fix the problem or is this an attempt by Google to force me to Chrome, much like trying to crush Netscape in favour of Microsoft's Internet Explorer?

  I thought about it. It is not the browser itself. It happened that I had two pages that open when I started the browser (at home and at work) and it was one of them who had a Google map. They have had to fix their Web site.
  Sorry Google, to think that you were an evil Empire!