Port PS2 wont work on windows 8

Similar Questions

• HP Pro 3400 MT (usb ports do not work in windows 8.1 on Intel chipset)

  Are prorts USB on my computer do not work!
  I have Intel (E) 6 series C200 chipset. I'm updating all the drivers and after 5 to 15 minutes when the computer starts, usb ports have stopped working.
  My computer model: HP Pro 3400 MT
  OS: Windows 8.1
  Please, help me! How can I solve this problem?

  Yep! But... If this is not a new installation work? Hmm...

  Without doubt, I find a reason. It's for my X-710-BK (a4tech) mouse drivers. I switch to a different mouse and system now works fine!

  PS > not update drivers just because you can. Updated only if you wish.  -I agree!

• USB ports do not work in windows 7 (64 bit)

  Hello

  recently installed windows 7 on my computer laptop 15-n203tx

  problem is my usb ports work fine in pre installed win 8.1 but now in win 7 port just one works and is the usb 2.0 port and two others are 3.0 and not workng please help me solve this problem!

  Hello:

  You must install this driver usb3.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

• Satellite Pro 480cdt: USB ports do not work with Windows XP

  Hi friends.

  I install xp window in my laptop, now I can not install any material thanks to a port USB flash drive IE, wireless modem, camera

  Hello my frend

  You are joking or you are serious with the use of Windows XP Home edition on this point, unit for almost 10 years. ;)

  The set comes with Win 95. Try to use Win 98 and be happy if it works properly.

• USB ports do not work in Windows 7

  Where my Windows 7 played very well a few weeks ago now, I can't access the USB ports. With a flashdrive in the port, Device Manager it says: 'a driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32) ». I uninstalled all programs I had installed in the last 2 weeks so far. Currently, the two pilots showing with a flash drive in the USB port are: disk.sys and partmgr.sys. Could someone guide me how to activate the USB port, I can use a USB Flash drive or even external hard drive USB? Thank you

  You are welcome. Glad to see that worked.

• USB ports do not work with Windows 7

  None of my USB ports on my Alienware laptop. I recently had the formatted hd and reinstalled the Windows 7 operating system. During the boot process any device are connected which has a power light turns on, but as soon as windows starts everything goes off. Once in windows, nothing works and I can not even my computer to recognize there is a connected device. Can someone help me?

  Have you gone to the support of the computer manufacturer web site and downloaded and installed

  all the updated drivers?

• USB ports no longer work after windows 10

  Hello

  Tried to solve the problem I have with my usb ports not recognizing not not the mobile hard drive trying to help pre Windows 10 answers but no luck.

  Please could someone advise or help me reinstall my usb drivers? for my system, now I win 10. Thank you

  Steve

  Hello

  Thank you for your help...

• DisplayPort does not work in Windows 7

  HP ProBook 6545b

  Display port does not work in WIndows 7.  There are several devices in Device Manager that have no drivers, but Windows in unable to find a driver for them.  I downloaded almost all the drivers on the HP website for the laptop and install.  The Device Manager has 1 unknown device and 2 Base system devices that have no drivers.

  Display port worked fine when I had Windows XP on the laptop.  Win7 installation is a new facility on a wiped driver, is not the upgrade.

  Thank you

  cbabfat

  Hello:

  What bit to W7 version do you use?  32 or 64?

  This driver must take care of the Base system device.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4021366&prodNameId=4021367&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-79991-1

  For other missing devices, please click in the Device Manager. Then click on the Details tab. In the property drop-down list, select the second element (Hardware ID).

  After the first string you see here. Those who will be to further identify the device and I can send you the link for the drivers.

  Paul

• How to get AC 97 Front Panel Audio and Microphone ports to work with Windows 8

  I have a m7277c HP Media Center that uses the motherboard Asus P5LP-(Lithium-UL8E) and has an Audio Jack and Microphone AC 97 spec ports on the front panel. I tried to install the Codec AC 97 drivers for Windows 7 and they do not work for Windows 8. The 'High Definition Audio Codec"Windows 8 drivers only work for the Ports on the rear panel, not the Ports on the front panel.

  How can I get AC 97 Front Panel Audio and Microphone ports to work with Windows 8?

  Hello

  Your model has not been tested for the use of Windows 8.

  For this reason, HP cannot provide instructions to upgrade or Windows 8 pilots.

  Therefore, it will be very difficult to provide a solution.

  Thank you

• How to get 2 usb ports 3 to work on 2215dx hp with windows 7

  I just updated my hard drive on the laptop HP 2215dx with a Samsung ssd. I did a clean install of Windows 7 instead of win 8. The only thing that the doesn't work after installing all the disks that I found is the 2 usb ports 3. They produce an error in Device Manager. What driver to install to get these 2 usb ports work under Windows 7?

  Thanks for the help.

  Hello

  What is a G7-2215dx? Please try:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=ob-102571-1

  Kind regards.

• This will work if I plug it into the USB Port of a desktop with Windows 7 HP?

  I had the hard drive of my worn desk w / Vista HP layout box HD Startech. This will work if I plug it into the USB Port of a desktop with Windows 7 HP?

  Hello
  Yes it will work. You can access files on the hard drive but not the Oprating system hard disk previous. The previous hard drive can be used as hard drive.

  I hope this helps.

• USB ports no longer work after upgrading Windows 8.1

  I have upgraded to windows 8.1 and from that moment, my USB ports don't work anymore. tried to check them, but does not (uninstall,...);

  I have a HP Pavilion 15-B050EB; I can't find the drivers for the USB ports on the HP site. can someone help me?

  called them; very friendly guy, but the only solution is a total recovery.

  which means a working day to do backups and re - install software programs...

  Thanks for your kind help anyway!

• USB ports do not work on my pc windows 7

  I had installed windows 7 os newly but the usb ports do not work.

  and ports work in windows 8.

  while trying to install the usb driver its showing already installed on your pc.

  I don't understand what the problem is.

  If you are From India call 180030005366 and ask to Lenovo Tech person to take the remote control system to check, seems like a patch required on their side

• Envy of HP Dv7 - 7223cl Windows 7 Ultimate 64 - Bit: USB 3.0 Ports will not work.

  When I plug my mouse into one of the USB 3.0 ports, Windows does not sound has indicated that it is connected. I did a clean reinstall there two days and most of my drivers installed, but they do not work. A store local deleted Windows 8 PC and installed Windows 7, a few weeks ago, and USB 3.0 ports was working at this time, so drivers exist. After having some problems, I decided to do a clean reinstall of Windows 7, which has deleted all my drivers and I was able to reinstall most of them, but USB 3.0 ports has not worked since and still not working. I looked on the internet, but I couldn't find the right one. I looked in the management system and found that two devices: PCI Device and SM Bus controller are shown with a yellow sign. After looking under properties, I found that the two do not have their drivers installed (Code 28). Anyone know where to find the drivers for this problem?

  Nevermind, it works now. I just had to uninstall and reinstall all components of AMD. Thanks for your information!

• USB ports not working no-Windows 7 on Imac

  Hello

  I ve just installed Windows 7 on an Imac end 2012, using an external hard drive and running in Bootcamp.
  Everything went well, Win 7 works perfectly, but all USB ports do not work. Everything I plug into their t doesn't get recognized (flash memory usb cards, mouse usb, external drives...).   They work in OSX.
  All other ports (ethernet, audio, output Thunderbolt) work very well under Win 7.
  What I tried, no still no usb operation:
  -Reinstall Win 7 (just to check that I used a mouse usb, what worked very well right up until the last reboot needed to complete the installation.) Subsequently died)
  -reinstall all software Bootcamp (actually, fix, that you can't just unninstall and reinstall) has done that several times...
  -tried to uninstall the usb ports in Device Manager, I couldn't use my Apple wireless mouse more, so I had to restart after the first. Yes, after a restart, he says it's to install the missing disks, yes they are all perfectly... However - install no USB
  -No, no problems appear in the resolution of the problems of the unit
  Do you have any other ideas I could try?
  Thank you very much.
  Marian Nedelcu
  Here is my config Imac. in case it helps:
  IMac 27 inch Quad-core

  3.4 GHz I7,

  32 GB OF RAM,

  3 to FusionDrive,

  NVIDIA GTX 680MX 2 GB,

  Magic Mouse, Apple wireless keyboard

  Hello

  I suggest you to contact the Apple support and check if it helps.

  http://www.Apple.com/support/Mac/

  Hope this information is useful.