Portégé R500-10U purchase in Greece and 3g module

Similar Questions

• Portégé R500-10u: energy-saving - the battery life and screen

  Hello
  I just bought a Portege R500 10u and I fight with the energy saver utility.

  No matter what I do, when I switch to the power of the battery, the phone tells me that the maximum time I have is 2 hours and 45 minutes - even when I do not do anything on the laptop at all.

  Furthermore, the screen saver is constantly on all the time. In the public service of electricity of standby, everywhere wherever I could see, the setting is NEVER. When I on the power controls in Windows (I use Windows XP), the screen saver is programmed to start, but I'm not able to change this setting. I get a message that I need to use the Toshiba power saver utility.

  Can anyone help?

  Thank you

  > still not more than 3 hours and 20 minutes under full load, with disabled wifi

  You said * ONLY * 3 hours and 20 minutes! Hey Buddy, are you kidding me!
  It's more than enough for this laptop! There s nothing wrong. Believe me ;)

• Comparing the Portégé R500-10J and R500 - 11 c

  Hello

  Anyone know the difference between Portege R500-10J and Portégé R500 - 11 c?

  Hello

  I searched and studied a bit more on different websites, and it seems that both computers portable Portege R500 support the same hardware specifications:
  Intel Core 2 Duo 1.2GHz / 2048 MB / 160 GB / TFT12.1 / Intel GMA 950 GPU

  I think these two laptops are delivered and designed for different countries and the model number is therefore different.

  The Portégé R500-10J PPR50E-00K00PSP seems to be sent to Spain, and the Portege R500 - 11 c PPR50E-00K04LRU can be purchased in Russia.

  Best regards

• I just purchased lightroom 6 and received the message that your Adobe License order has been processed, but no serial number?

  I just purchased lightroom 6 and received the message that your Adobe License order has been processed, but no serial number?

  You can check: site Web of Adobe License | Serial numbers, orders and accounts,, as it seems that you have a volume license order.

• I just purchased Illustrator CC and when I download it, it says trial has expired and does not activate my product.

  I just purchased Illustrator CC and when I download it, it says trial expired and by clicking on the license of this product, it is said that it does not recognize my AdobeID subscription and will not activate my product.

  Hello Andrea,

  Please see the documents below: -.

  Solve the common activation Adobe Creative Cloud (login) and questions (disconnect) disabling or error messages

  Creative cloud do not forget and do not store my credentials.

• How do I monitor/find where is the State of my download?  I don't know how long it takes or if there is a problem with the download that I can't find anything.  Also, is it supposed to be an icon for my purchase of Photoshop and light in my apps folder

  How do I monitor/find where is the State of my download?  I don't know how long it takes or if there is a problem with the download that I can't find anything.  Also, is it supposed to be an icon for my purchase of Photoshop and light in my apps folder?  Where can I find that when it's done download?

  Could you please confirm the operating system you are using.

  You can see the status of the application of CC desktop download.

  The CC app desktop click the creative cloud icon located in the taskbar (Windows) or the Apple bar (Mac OS) menu, to open the creative cloud desktop application.

  Hope this will help you.

  Kind regards

  Hervé Khare

• I tried to edit a pdf file and it keep direct me to the purchase of subscription and I already have one

  I tried to edit a pdf file and it keep direct me to the purchase of subscription and I already have one

  Hi anthonyt40697810,

  Are you able to connect?

  If Yes, then just Sign In to activate the subscription by using your Adobe ID.

  Kind regards

  Nicos

• recently purchased Premiere Pro and we are looking to purchase the complete Suite of Cloud Creative...

  My company recently purchased Premiere Pro and we think on the purchase of the full Creative Suite of Cloud, we would be able to buy the whole suite, even if we bought the first?

  Also if we did it would then become a fixed payment per year?

  I was also wondering if you had could have on multiple systems, that there are 2 member in this team and we will need the product.

  I just need some advice

  Hello

  As you have a creative cloud on behalf of teams, you should be able to add licenses for Creative Cloud full of the administration Console.  You will need 1 license/seat for every person who needs to use the software.

  You can choose to pay in advance for the year or pay monthly.

  Please contact our support team for advice on the cancellation of the single app Premiere Pro plan - Contact customer - cloud creative teams

  Kind regards

  Bev

• Just purchased Lightroom 6 and my computer is 32-bit. What can I do?

  Just purchased Lightroom 6 and my computer is 32 bit, download does not have what I can do? Help, please

  Your options would be to get a refund or upgrade your system to be compatible with Lightroom 6.

• I own a licensed copy of LR 5.4 and Photoshop CS5. If I rent the LR/Photoshop combo and later decide against him, I'll always have my copies purchased from LR and Photoshop?

  I own a licensed copy of Photoshop CS5 and 5.4 LR (downloaded). If I rent the LR/Photoshop combo and later decide against him, I'll always have my copies purchased from LR and Photoshop?

  Also, if I rent LR, the downloaded version will have to be started from scratch or photos I already will be in it.

  Thank you

  garywebb wrote:

  I own a licensed copy of Photoshop CS5 and 5.4 LR (downloaded). If I rent the LR/Photoshop combo and later decide against him, I'll always have my copies purchased from LR and Photoshop?

  Yes. They are perpetually products under license with their own serial numbers. They will continue to work as long as you have the hardware and the operating system to run.

  Subscribe to the product Adobe Cloud - including the PS + LR combo - has no effect on your ownership of your perpetually licensed products.

  Also, if I rent LR, the downloaded version will have to be started from scratch or photos I already will be in it.

  Lightroom is the database via the Lightroom Catalog.

  Once you have correctly installed the subscription version, open your existing Lightroom Catalog and everything will be the same as before.

• Can I transfer and use my apps purchased as Photoshop and Lightroom on my new Macbook Pro?

  Can I transfer my apps purchased; Photoshop CS5 and lightroom 4 for my new Macbook Pro, without having to purchase them again?

  Yes. Disable them on your old system and install lthem on the new.

  Mylenium

• Custom hardware and the module of ARM

  Hello world

  Our company is in the early stages of designing a custom measuring device. In the past we used Microchip microcontrollers (PIC16 and 18), a simple IDE and a C compiler, but for the new generation of devices we will use microcontrollers from Luminary Micro ARM. Since we are also users of LabVIEW, the choice for the LabVIEW embedded module for ARM seems logical. I read a lot of documentation OR and watched the tutorials, but I'm still uncertain on what we may or may not do with the module. Until we buy eval kits and the module, I need to have some facts.

  1. The 'heart' of our circuit is a microcontroller LM3S1968, this MCU is ARM Cortex-M3 based. It is listed in Keil device database (http://www.keil.com/dd/), then is also a LabVIEW "Tier 1" - peripheral (http://zone.ni.com/devzone/cda/tut/p/id/7066)? ".
  2. What I have to add the MCU manually to the project as described in http://zone.ni.com/devzone/cda/tut/p/id/7152, or can I just it select from a menu?
  3. We already have a LM3S1968 evaluation kit (http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html) and a programming JTAG device. We can use these hardware components to evaluate the LabVIEW ARM module or should I buy a complete kit of NOR (including the dev board)?
  4. Is a JTAG connector on our device and a connection for a JTAG debugger, all I need for debugging the device with LabVIEW?
  5. Assessment OR (http://sine.ni.com/nips/cds/view/p/lang/en/nid/205040) kit includes JTAG Keil ULink2 adapter on the photo?
  6. We want to connect the MCU to a converter A/D, the AD7738 of Analog Devices (http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad7738/products/product.html). We will use the SPI bus for communication and I know what codes to send to get a basic reading. What I need to use the SPI-Subvi and send the hex codes or can I use a Subvi 'AD7738' built-in device drivers CD?

  I apologize in advance for the number of questions, it's just that the use of LabVIEW for the development of material is completely new to me

  Thanks in advance for your help.

  Paul

  Hello Paul!

  I'll try to answer your questions and I hope someone else can add more information if necessary.

  1. The 'heart' of our circuit is a microcontroller LM3S1968, this MCU is ARM Cortex-M3 based. It is listed in Keil device database (http://www.keil.com/dd/), then is also a LabVIEW "Tier 1" - peripheral (http://zone.ni.com/devzone/cda/tut/p/id/7066)? ".

  Answer: no, that would be a level 2 device, we now offer three level 1 devices and information on these can be found on the link you condition.

  1. What I have to add the MCU manually to the project as described in http://zone.ni.com/devzone/cda/tut/p/id/7152, or can I just it select from a menu?

  Answer: you need to add yourself as described in the link you provided.

  1. We already have a LM3S1968 evaluation kit (http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html) and a programming JTAG device. We can use these hardware components to evaluate the LabVIEW ARM module or should I buy a complete kit of NOR (including the dev board)?

  Answer: is trickier, LV Module Embedded for ARM in trial mode will have some limitations (size applications, can open the development environment for a number of days and so on), but it should not have limits when it comes to other targets as described in the links that you have already provided. When it comes to the JTAG interface, I would recommend using the Keil ULINK2 USB-JTAG.

  1. Is a JTAG connector on our device and a connection for a JTAG debugger, all I need for debugging the device with LabVIEW?

  Answer: I would like to make use of the Keil ULINK2 USB-JTAG Adapter for debugging and allows us to download the code on the target. In fact, it's the only way we can download code on the ARM, but we can use a serial port / TCP in addition to JTAG debugging.

  1. Assessment OR (http://sine.ni.com/nips/cds/view/p/lang/en/nid/205040) kit includes JTAG Keil ULink2 adapter on the photo?

  Answer: Yes.

  1. We want to connect the MCU to a converter A/D, the AD7738 of Analog Devices (http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad7738/products/product.html). We will use the SPI bus for communication and I know what codes to send to get a basic reading. What I need to use the SPI-Subvi and send the hex codes or can I use a Subvi 'AD7738' built-in device drivers CD?

  Answer: I/O could be implemented using the basic IO layer provide us as described here:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7119

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7144

  I hope this helps!

• Find the cDAQ and command module at startup

  Hello

  I have a cDAQmx (8 slots) with USB port and a module of series C. 4 modules are digital 4-channel input (up to 220 v), 1 analog input, analog output 1, 2 digital output, etc...

  I want to make my program (for testing electronic cards) is:

  (1) at startup, check if the cDAQ is present in the system (i.e. USB is plugged, drivers were already installed correctly)

  (2) also check the modules which are plugged into the cDAQmx and check if they are in the correct order.

  For example, to test the product X I need two digital inputs to slot 1 and 2 and an analog input to slot 3.

  I ask this because people in production could make the mistakes I want to avoid:

  (1) avoid forgetting to plug in the USB and begin the test

  (2) avoid to connect the wrong terminals! The plug is the same for each module, so it is possible teoretically put the connector in a 10V analog input to 220V, causing a serious injury (I know they are protected, but I want to avoid this risk).

  For the chassis, you should be able to query "Device Module names" to get the name of each module currently in the chassis:

  

• HP Pavilion 17-e135sw F9V61EA: how meny memory locations are in and and memory modules can be used

  HELO

  How meny memory locations are in and and the modules of memory can be used?

  Have a nice day

  There are two available slots. Replace the memory in identical pairs.

  Do a Google or Bing search with 17-e135sw + upgrade memory as search terms. Single purchase guaranteed manufacturer\vendor guaranteed-compatible memory.

• PoCL FlexRIO 7962R and 1483 module

  Hi people!

  I use a platform SMU make some video acquisition/processing. I use a 7962R with a module of 1483 FlexRIO (and therefore a connection Camera Link between the 1483 and the camera).

  With the help of examples of LabVIEW, I managed to develop a project to acquire videos and save them on the hard drive of the control. In this application, the device is powered by its own cable, separated from the Camera Link cable to connect the camera and the module of 1483.

  Now, I would like to use the CL cable to power the camera and get rid of the other cable. CL cable I use is compatible with Power over Camera Link. But I can't find any information on the weather the FlexRIO 7962R and 1483 module allow to use PoCL or not. Does anyone have information on the PoCL? You have an idea on how I can do with the platform that I have?

  I had a look on the specifications of a capture card that I use on another computer. It seems that PoCL is provided via pins 1 and 26 of the CL connector. Does anyone know if the pins 1 and 26 are connected to the electronic circuit of the 1483 module? Is it possible to configure the FPGA so that power can be delivered through these pins?

  Thanks in advance for your answers.

  Nice day.

  Luke

  1483 can't PoCL. A re DGND-pin 1 and 26.