Position of the numbers messed up in a chapter

Similar Questions

• How to make a text field to accept a capital letter has or a number in the position of the first character and only the numbers after that?

  Hi all

  We have a text field in one of our screen in our mobile app. Currently the user can enter alpha numeric characters in this text field.

  It is now that this field should accept a capital letter A or a number in the position of the first character and only the numbers after that.

  Could someone let us know how to do this?

  Thank you.

  Or, how about the substitution of this abstract method in textFilter?

  public boolean validate(character char,
                          AbstractString text
  int position)

• Get and set a Position of the pre-numbered WPF legend

  I'm creating a WPF application that displays a chart of data (several courses) and adds several annotations programmatically. The user has the ability to drag the annotation (InteractionMode = AnnotationInteractionModes.DragLabel) labels. I need to be able to record the new position of the label and load it later.

  I use the NationalInstruments.Controls.PointAnnotation a NationalInstruments.Controls.Graph object.

  I thought it would be reflected in the LabelAlignment, but that does not change the value that I set when I initially create the annotation of.

  Here's how I add the annotations on the graph:

  /// 
  
          /// Add the annotations to the graph
          /// 
          /// 
          /// 
          /// 
          private void DisplayAnnotations(DataHandler dataHandler, DateTime StartDate, DateTime EndDate)
          {
              PointAnnotation tmpAnnotation = new PointAnnotation();
              //Iterate through all the annotations in the source data set
              foreach (Post_Job_Charting.Annotation dataPointAnnotation in dataHandler.Annotations)
              {
                  TimeSpan DateDiff = EndDate - StartDate;
                  TimeSpan HalfWay = new TimeSpan(StartDate.AddSeconds(DateDiff.TotalSeconds / 2.0).Ticks);
  
                  //Only add annotations that are in the visible data range
                  if (dataPointAnnotation.Date >= StartDate && dataPointAnnotation.Date <= EndDate)
                  {
                      tmpAnnotation = new PointAnnotation();
                      tmpAnnotation.HorizontalPosition = dataPointAnnotation.Date;
                      tmpAnnotation.VerticalPosition = dataPointAnnotation.Value;
                      tmpAnnotation.Label = dataPointAnnotation.Text;
  
                      if (dataPointAnnotation.Date.Ticks < HalfWay.Ticks) { tmpAnnotation.LabelAlignment = new AnnotationLabelAlignment(BoundsAlignment.None, 0, -25); }
                      else { tmpAnnotation.LabelAlignment = new AnnotationLabelAlignment(BoundsAlignment.None, -75, -25); }
                      tmpAnnotation.InteractionMode = AnnotationInteractionModes.DragLabel;
  
                      //Show/Hide the annotation
                      if (dataPointAnnotation.Display) { tmpAnnotation.Visibility = System.Windows.Visibility.Visible; }
                      else { tmpAnnotation.Visibility = System.Windows.Visibility.Hidden; }
  
                      //Tag the annotation so I can find it later
                      tmpAnnotation.Tag = dataPointAnnotation.ID;
  
                      //Display annotation on the graph
                      niGraph.Children.Add(tmpAnnotation);
                  }
              }
          }
  

  Once I have the position of the label, I need to be able to reset the label to this post, but let's start first of all, I need to get this job.

  Any help you can offer would be greatly appreciated.

  Best regards

  -Marcel

  There is no property on the annotation of point that sets the position of the label. I created a task to look by adding this.

  However, you can monitor the changes using a custom BoundsAlignment application that registers the new offset as it is updated:

  public sealed class RecordingBoundsAlignment : BoundsAlignment {
        public Vector LastOffset { get; private set; }

  public override Point AdjustPosition( AlignmentArgs args ) {
            LastOffset = new Vector( args.XOffset, args.YOffset );

  return None.AdjustPosition( args );
        }
    }

  When you create the annotation, you use an instance of the alignment of the record, and when you want to store the position you will be able to read the value of the recorder:

  tmpAnnotation.LabelAlignment = new AnnotationLabelAlignment(
        new RecordingBoundsAlignment( ),
        initialXOffset,
        initialYOffset );

  // ...

  var recorder = (RecordingBoundsAlignment)tmpAnnotation.LabelAlignment.Alignment;
    Save( recorder.LastOffset );

• follow all the numbers listed entirely

  Hello

  in the column on the left side of the iTunes window where it shows for example that number piece is played in a particular selection, on my mac, not every number is registered. Before each issue was the show in its entirety, after that I must have clicked on something accidentally column now looks something like this:

  4271

  4272

  42...

  4274

  42...

  42...

  4277

  It seems to be no regular pattern, the numbers that appear entirely seem to be chosen at random. Another observation is that the column with the number does not have a position, even if I don't remember if that was the case before the problem arose.

  I tried to adjust the size of the column by dragging the column, open iTunes full screen and also removed some categories of view option to create more space for the numbers. Everything I tried had unsuccessfully, unfortunately, can someone point me in the right direction please?

  Thank you

  Someone else posted about it recently. I think there may be a way to adjust the font size in views or somewhere. Also report the problem to Apple:

  http://www.Apple.com/feedback/itunesapp.html

• Do the numbers tell me the last date of a cell containing specific text

  Hi guys,.

  I'm setting up a pilot logbook and I need to keep track of when I lead some approaches to the instruments for the purposes of recency.

  For example, the last time I did a VOR approach was April 20, 16.  I need the numbers to recognize the "VOR" text and give me the corresponding date.  I'm having numbers give me this date in a separate table.

  Any ideas on how to do this would be greatly appreciated.

  

  Thank you!

  Hi Walter,

  This is a roundabout way. Perhaps another user will display a more elegant way.

  

  Table 1 is a version abridged your journal of driving. Here is table 2:

  

  Table 2 uses the SIERREUR function to place "" (NULL) if the SEARCH fails to find a match between the value in the header line and an entry in the log of your flight.

  Otherwise, it inserts a value (The FIND returns the starting position of a string in another).

  Now we've found BK VOR (and fill to the right) and SID.

  Columns needed for approaches more more!

  

  Table 3 is a Date of any cell in table 2 which is not "" (NULL).

  Formula in A2 (and fill down and fill the right)

  = IF(Table 2::A2≠"",Table 1::$A2,"")

  You can type this than = IF (table 2::A2 <>"", Table 1: $A2, "")

  3 numbers will change <>≠

  Formula of the cell footer of table 3 (for column A, then fill to the right)

  = MAX (A)

  To improve the 'presentation', move (copy / paste) 2 Table to another worksheet (TAB). The formulas will adjust automatically.

  

  Happy flying!

  Kind regards

  Ian.

• How to copy the numbers in a cell to another cell and gets their total

  500.40

  192932.90

  231838 * 90

  290414 * 15

  222312 * 15

  222314 * 5

  141722 * 20

  Hello, can I ask how to copy the numbers after the period/asterisk to another cell and then add up all the numbers copied without having to type them.thank you

  Hi mirijin,

  

  Break the problem into small steps:

  Step 1. All separators (periods and asterisks) convert the asterisks.

  Formula in B2 (fill down)

  = SUBSTITUTE(A2,".","*")

  Step 2. Find the position of an asterisk in each cell.

  Formula in C2 (fill down)

  = FIND("*",B2)

  Step 3. Extract everything to the right of the asterisk.

  Formula in D2 (fill down)

  = RIGHT (B2, LEN (B2) −C2)

  Step 4. Convert the text to numbers re using the VALUE function.

  Formula in E2 (fill down)

  VALUE = (D2)

  This table has a header row and footer of the line, so the SUM in E9 apply to all cells in the body.

  = SUM (E)

  You can combine the individual forms in a unique and complex formula, or simply to hide intermediate columns B, C and D:

  

  Kind regards

  Ian.

• How to write the formula 'SUMIF' by the numbers

  Hi all

  I am trying to write a formula that will summarize only positive numbers.  The added column is filled with positive and negative numbers, and I thought that a simple SUMIF (range), > 0 would work.  I tried with and without '> 0' but I keep getting the error icon.  Am I doing something wrong, this generally works on Excel but do not know if the numbers has a structure of different formula.  Thank you

  You can summarize a range (say the column was) like this:

  = SUMIF (A, "> 0")

  If you had the "value comparison" in a cell (cell B1 of perhaps), then you can also use:

  = SUMIF (A, ">" & B1)

• interruption of a structure of consumption of prodcer to regularly test the position of the servo

  Hey guys, I'm relatively new to labview and currently trying to make a multi snake like robot scene. I was interfacing with Controllers USB pololu and the need to manually control the first step and I have the remaining steps to follow, I have the first stage, using the controls on the front panel. I use a model of consumption of the producer and have pushed the button Activate an event and then queued a case in a second "loop of material."

  my current problem is now I want to start working on the control of the secondary step passively, so I want to move the front of the stage tilted upward and then start rolling on before and the second stage begins to follow in the same position. I want to interrupt regularly and check the positions on the servos to compare and to act accordingly. My first thought is to interrupt the timeout in the case where structure and test if the servos are in the same position. the problem is that my visa reference is in the other loop.

  What would be the best way to go about this? should I just queued in my gear loop on a time out and then test the position of the servo. or is there a way to share my visa resources in the loop of the producer? I originally wanted to store the reference in the loop of producer and pass whenever I went to the consumer loop but I couldn't figure a way to return the updated reference and I kept getting errors.

  call loops are an option here? any advice would be helpful. even if you have a better structure to redo the entire project. I'd love to hear it for next time if nothing else. also if theres a better void / forum bad gladly move the pole.

  Thank you guys

  1. I aim to convey information/data to the loop of the reactor of the user interface.  Leave the loop creator UI just intercept the events of GUI and send jobs to the reactor loop.  You can create more brains to the reactor loop and let it also receive the strap of material information/work.

  2. a simple concept for a regular position servo application would be an additional loop.  It's the only work is have a wait timer, then queue on demand to the loop material to ask him to send the position of the servo.  It will send to the loop of the reactor, as always, and the loop of the reactor will have built to react appropriately when it gets the position of servo information.

  3. I would not speak for the servos in any other place that the loop of material.  There are all kinds of mess if you can send orders series of different loops at the same time, can receive the answer poorly or not at all.

  Sorry, don't have time to go into details, but hope this helps a little, when you think about the implementation of the app.

  -Kevin P

  4 P.S.  I also wanted to talk about: it seems that both your reactor and Hardware loop are consumers of the same queue.  Although I see not how did you preview first and then queue only if necessary, he is still not a recommended approach.  Consider: If a loop is blocked when one of his messages is in the front of the queue, it will make the other loop stuck too.

• position of the error

  Hi all

  develoepr SQL does not stand on the position error when an error occurs,

  is this a normal behavior? or y at - it an option I can change to get the position of the error?

  Thank you

  Just guess what you ask...    First of all, keep in mind when you use a code editor / worksheet, you can always switch on line numbers by right clicking in the gutter to the left margin.

  If an error occurs during execution.

  1. a file of script in the worksheet (run with @scriptname).  In the tab out of the Script, the lines of Blue hypertext link will be present.  Click on those to open the script file and the position on the error line.

  2 inline script in the worksheet executed using to execute the Script (F5).  In the tab out of the Script, the lines of Blue hypertext link will be present.  Click on those position on the error line in the worksheet.

  3 case 2, but using execute statement (Ctrl + Enter).  The line numbers and the error column will appear in the results of the query tab.  None of the hyperlinks are available to access the error line in the worksheet.

  4. compilation of a database object.  The line numbers and the error column will appear on the compile tab of the Log pane.  None of the hyperlinks are available to access the error line in the code editor.

  Hyperlink lines are a new feature for 4.0.x.

  Kind regards

  Gary

  SQL development team

  Post edited by: Gary Graham

• positioning in the new ellipse problem layer

  I created the new layer in my document, then a new ellipse within that layer.

  I am positioning the new ellipse in the upper layer (vertically) and in the center of the layer along the x-axis (horizontal).

  Nothing I have tried seems to move the left object to the starting x position layers (I can move it just fine!).

  I'm confused because my high properties and the height of the layer are negative numbers - but when I look at the ruler, all are above zero?

  What I am doing wrong in terms of positioning of the ellipse in the layer?

  Here is a sample of my script:

  var childLayer = currentLayer.layers[j];
  var xmin = childLayer.pageItems[0].geometricBounds[0].toFixed(2); // top
  var ymin = childLayer.pageItems[0].geometricBounds[1].toFixed(2); // left
  var xmax = childLayer.pageItems[0].geometricBounds[2].toFixed(2); // bottom
  var ymax = childLayer.pageItems[0].geometricBounds[3].toFixed(2); // right
  
  var newBoneLayer = boneLayer.layers.add();
  newBoneLayer.name = childLayer.name.replace(OBJECT_MARKER, "");
  var halfOfWidth = parseFloat(childLayer.pageItems[0].width/2).toFixed(2);
  var boneGuideXPosition = parseFloat(xmin + halfOfWidth).toFixed(2);
  var boneGuide = newBoneLayer.pathItems.ellipse(ymin,boneGuideXPosition, 10.0, 10.0, true, false);
  
  boneGuide.stroked = true;  
  boneGuide.filled = true;  
  boneGuide.opacity = 40.0; // set to 40% opacity
  var newRGBColor = new RGBColor();
  newRGBColor.red = 204; 
  newRGBColor.green = 255; 
  newRGBColor.blue = 255; 
  boneGuide.fillColor = newRGBColor; 
  

  Sorry my bad.

  even in my script, it should be...

  var x = AB[0]+((AB[2]-AB[0])/2);
  

• How can I play a clip of the position of the read head instead of from the point to?

  In first Pro CC, if I already put an in and out point in my source monitor, space plays clips of the point bar in only.  I prefer to be able to move my CTI at any place in my clip, press the space bar and play from there, but it always aligns the point in and play from there.

  The game around shortcut is a joke because he plays not the location of the playhead and loops at seemingly random intervals.

  Any thoughts?

  Yes, 7.2.1 represents the current version.

  Normal default behaviour of the organism is exactly as you want it to be. By pressing the space bar should start playing the position of the read head. Playing around should similarly work compared to the CTI.

  As to why these commands do not work as expected, I see that two causes:

  1. keyboard shortcuts have been customized. It's easy enough to check. Just open the keyboard shortcuts dialog box and research "Toggle Play-Stop" and "play out."
     Of course, the shortcuts could be the culprit if the wandering behavior is limited by using shortcuts. You have not indicated if the buttons give the same results.
  2. Something is messed up in the preferences of the AGENCY. To check this possibility, I recommend that you close the BODY, rename the folder profile- ... \Documents\Adobe\Premiere Pro\7.0, then revive the ORGANIZATION. In this way, if this measure does not resolve the problem, you can easily return to your customized preferences by removing the new profile - folder and rename the file old back its original name.

• Book of 10 with several files frame crashing when I change the numbering at the level of the book.

  I built a picture book (image 10) with several files from a variety of books. The files have inlays of text and references to breast and between chapters. When I go to set the numbering at the level of the book - as soon as I click on the Numbering dialog box Set - Framework breaks down and I get an internal error 10024, 6382424, 6369627, 6383085. I have attached a screenshot.

  I take the files on the book and added back in. These files worked fine in the original books, that I copied them from. I can't get the book to number correctly. Help, please.

  Hi, Estelle,.

  Don't know if this is relevant to what you are feeling, but...

  I've encountered similar problems of numbering with several of my books.

  What fixed it finally for me, is that I discovered that some files were overrides of paragraph style (not necessarily related to positions or section heads.

  Once I removed all replacements of these files, numbering issues have been resolved.

  While I use the plugin Tools section , you can scan your files for the substitutions with built-in FM find/replace.

  Kind regards

  Amitai Sela

  Philips Healthcare

• Renumbering of the numbers

  Hi all

  Can someone help me I have a document that contains many said for example that there numberes from 1-100. Here, I want to remove numbers from 1-100 for example say 22, 23 and 23 after the removal of these figures, I want the rest numberes numbering the final number should be 97.

  Im trying with the code but cannot find the answer below.

  myDoc var = app.activeDocument;

  app.findTextPreferences = null;

  app.findTextPreferences.findWhat = "^ 9;

  app.findTextPreferences.position = Position.SUPERSCRIPT;

  var myFound = myDoc.findText ();

  change of var = 0;

  for (var i = 0; i < myFound.length; i ++) {}

  myFound [i] .appliedCharacterStyle = myDoc.characterStyles.item ("Sup");

  {If (myFound [i] .appliedCharacterStyle! = {myDoc.characterStyles.item ("Sup"))}

  app.changeTextPreferences.changeTo = "" + change;

  change ++;

  myDoc.changeText ();

  }

  }

  Thanks in advance,

  Kind regards

  Learner

  So you have to get numbers, no numbers, use Grep to find all the numbers: \d+

  Find all the numbers and replace their contents with the value of the counter of the loop for. no need to bother with that content really is.

  Then you have to work at the end of the numbers found in the beginning because the length of the number wioll change, for example 10 (two digits) can change to 9 (one digit). Like this

  app.findGrepPreferences = null;
  app.findGrepPreferences.findWhat = '\\d+';
  app.findGrepPreferences.position = Position.SUPERSCRIPT;
  numbers = myDoc.findGrep();
  for (i = numbers.length-1; i > -1; i--){
      numbers[i].contents = String(i+1);
      numbers[i].appliedCharacterStyle = myDoc.characterStyles.item("Sup");
  }
  

  Peter

• The numbers of page drag off the page

  I wrote a book. 266 pages.

  I use paragraph styles and style of the page on the right is "odd header".

  It works fine on all pages except section changes. Although the position of the majority looks fine in InDesign files, when I export the book in pdf format the numbers at the beginning of the sections are placed far to the right that they do not appear in the pages of chapter new pdf.

  I checked for "more wrinkles" and is not the problem. The text for the new section header block is the same framework that I use on the pages of each chapter.

  ID CS5

  Intel Mac 10.6.7

  Thank you.

  Postscripting isn't a way forward in the resolution of a problem, likely to beat the most problems.

  Better to fix the problem and have export properly.

• Grep which finds quotes and review for those on the right, but only after the numbers...

  Hello

  I'm trying to find all the quotes that follow the numbers and turn them into quotes.

  I'll try to put this in a GREP style eventually, but in the meantime, I examined it with find and change.

  Here's what I did... but it does not work.

  To find it - I have a positive look behind to find a digit, then pasted into the curly quote

  Fort of change to-I found the Unicode value for the right quote.

  But it did not work ;-(

  any thoughts there!

  Babs

  

  «is any sort of double quotation marks (straight, curly, opening and closing).»

  To force some sort of quote, use one of these:

  ~ {double opening curly

  ~} double closing curly

  ' ~ ' Straight

  "(Remplacez seulement) uses the typographer use quote setting (that is, if on, change to appropriate completed open or close, otherwise use the right)"