Possible to combine VOIP and teleconference call in the same session?

Similar Questions

• Portege M400: Is it possible to receive and make calls with the SIM card

  Is it possible to receive and make calls with the card SIM module in the Portege M400?

  I know that you can send and receive sms messeges, which, according to me, the software is not all good because you can't hold much, and you can't send to ems or mms.

  But there may be other software here?

  Hello

  What software do you mean exactly?

  As far as I know that the MobiLink was preinstalled on some units Portege M400.
  This software supports these features:
  Send and receive SMS, composition and read TEXT messages in several languages, compose and send to multiple recipients, the mobile contacts address book support, Rich edit for the launch of URL and Email using embedded addresses.

  As you can see that you can not use this software to make calls!
  And unfortunately other software does not know me :(

  With regard to the MobiLink Communications Software Suite;
  The details can be verified here:
  http://www.novatelwireless.com/products/solutions/MobiLink.html

  Greetings

• is it possible to combine ethernet and wifi connections to use both at the same time

  I want to fill the two connections without using third-party software can do this combine is wifi and ethernet, all use both faster speeds for

  Ethernet is the fastest connection to use your modem/router and it will not combine or run them both at the same time.

  To test your speed, try > http://www.speedtest.net/

  or > https://www.speakeasy.net/speedtest/http://www.speedtest.net/

  If you are unhappy with the speed of your ISP, you need to communicate with them or another ISP.

• Is it possible to set up for multiple users on the same computer to avoid entering the e-mail and the password

  Original title: Multi users

  Is it possible to set up for multiple users on the same computer to avoid entering the email and password every time that a new user want to check emails?

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. According to the description, you need help in the creation of multiple user accounts. I've surely you will help find a solution on the issue.

  What is the operating system installed on the computer?

  User accounts, several people can easily share a single computer. Each person can have a separate user account with unique settings and preferences, such as a screen saver or desktop background. User accounts control files and programs users can access and what types of changes users can make to the computer. As a general rule, you'll want to create standard accounts for most computer users.

  If you use Windows Vista or Windows 7, see the article below:

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  http://Windows.Microsoft.com/en-in/Windows-Vista/create-a-user-account

  For Windows XP users:

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783?WA=wsignin1.0

  Hope this information helps. Answer please if you have more queries about Windows.

• Can I organize pictures by year, then month, then the location. In the photo on my iPhone app, they are organized in this way and I would do the same in Lightroom. Is this possible?

  Can I organize pictures by year, then month, then the location. In the photo on my iPhone app, they are organized in this way and I would do the same in Lightroom. Is this possible?

  Find pictures of calendar is integrated into Lightroom. The filter bar allows you to find photos taken during the year, or any month/year or month/day/year. No work necessary to implement. Just use the filter bar.

  Location is also a means of organizing in Lightroom and is especially easy if your phone adds GPS coordinates to the pictures it takes. Even if the phone does not add the GPS location, you can do it manually in Lightroom.

• possible to install the client tools OBIEE and OBIEE server in the same machine

  Hello
  
  possible to install the client tools OBIEE and OBIEE server in the same machine.
  
  Ex:
  
  Last week I've updated Patch BP1 in my local system, in the process, we got the update also oracle Client tool
  
  But in my Administration tool in the built-in tool automatically updated, we need to install the client tool in my system?
  
  My doubt:
  Please check this screenshot
  http://ScrnSht.com/sskbjb
  Please help me,
  
  Thank you

  You should not install client tools because they will be automatically installed w install the server. The 11g installation guide says "do not install client tools on the same computers that host your server instances Oracle Business Intelligence, client tools are already installed on these computers (as part of the installation of Oracle Business Intelligence)."

  so useful, mark it as good or useful.

• Is it possible to have the source and target schema in the same instance of DB?

  Hi all
  
  I'm using Oracle 11 g 1 material.
  I spent another source than with OWB server locations.
  In the course of deploy I get VLD-3064 and I can't deploy mapping due to the many warnings "table or view does not exist.
  
  Is it possible to have the source and target schemas in the same case?
  How to do?
  
  Kind regards
  Martin

  Hi Martin!

  1. the target schema have select rights for source-tables/views.
  (Run as a user with dba rights: grant select on to ;).

  2 «.. . none generated code will use the link dataabase...'.
  This is only a warning and means there is no need to use a database link. If your mapping will be executed faster as using a database link.

  error of VLD 3064

  Greetings
  Guenther Herzog

• Is possible let activate domain multi UCS VM - FEX and sign up for the same vCenter

  Hi Experts,

  We have 7 domain UCS. But only a vCenter. Now, we want to enable VM - FEX on each UCS area and sign up for the same vCenter. Is - it work? I have found no description limit configuration on this relationship.

  Or we create 7 vCenter for each UCS area? (But I think it's not sense.)

  Best regards
  Meng-Yuan Hsieh (Nick)

  Hi Moua!

  I open a TAC case on that, and after that many discussions with Cisco, connecting several areas a single vCenter UCS is supported.  However, it turns out that Cisco failed to document this and how to make it work.  You will find that the procedures were written in old documentation for VN-LINK and others for VM - FEX.  This documentation shows that it is necessary to create new certificates, and it must match the key to expansion.  This is NOT true nor with the new versions of UCSM and vCenter.  Cisco, said they will update their documentation.

  Here are the steps that we took to connect two UCS areas for the same vCenter using default self-signed certificates.  I hope this helps...  Please mark this message as the right answer when you get a chance.  Thank you!!

  vCenter Version: 5.5

  UCSM Version: 2.2(5a)

  1. On the VM in UCS Manager tab, click VMware.
  2. Set up a key of the unique extension for every area of UCS.
  3. Click on "Configure VMware integration" on each area of UCS and export expansion of local storage.
  4. Install each UCS domain extensions in vCenter.
  5. After you install the extensions, back to UCSM and click Next where you left off in configure integration with VMware
  6. Run the wizard and after that it's over, areas of the UCS should now be connected to the vCenter.

  

• You try to run a Site to site VPN and remote VPN from the same IP remotely

  We currently have a site to site VPN configuration between our offices call center and a 3rd party that allows them to access our training to their employees to use environment while being trained on our systems. This tunnel is running between our ASA and their ASA without problem; However, when we have managers come out to the call center, they are unable to use remote VPN to access our office.

  Apparently the same IP peer remote that we use for our site to the other tunnel is the same IP that our managers use to access the internet when they are on-site with the customer. When I look at the logs it shows the VPN attempt and then I get treatment Information Exchange has failed. So from what I can understand when our managers are trying to connect to our firewall from the same IP address as the counterpart of site to site it automatically tries to create a tunnel, according to the information of the site to the other tunnel. If our managers are anywhere else, they can connect through remote VPN with no problems.

  My question is if anyone knows of a way to make the firewall allow VPN site to site and remote connections with the same remote IP address.

  Hi John,.

  Basically, in older versions, when you hit a static encryption card and you does not match this static encryption completely map the connection continues until the dynamic encryption card. For this reason, you can connect your IPSec clients before. A bug has been opened on this vulnerability.

  CSCuc75090  Details of bug

  The crypto IPSec Security Association are created by dynamic crypto map to static peers

  Symptom:

  When a static VPN peer adds all traffic to the ACL crypto, a surveillance society is based even if the pair IP is not allowed in the acl to the main façade encryption. Are these SA finally put in correspondence and commissioning the dynamic crypto map instance.

  Conditions:

  It was a planned design since the first day that allowed customers to fall through in the case of static crypto map did not provide a necessary cryptographic services.

  The SA must be made from a peer configured statically and a dynamic crypto map instance must be configured on the receiving end.

  Workaround solution:

  N/A

  Some possible workarounds are:

  Configure a static nat device when you try to use the remote VPN if the firewall remotely will be hit with a different public IP address. It would be a good solution, but it will depend on how many ip addresses public you have available, if you really want one of these ip addresses for that access.

  Also, I thought you could use AnyConnect instead of the IPSec VPN client. I don't know how many users need to connect from your PC to the remote site, but the ASA has 2 licenses SSL available that you could use. Because Anyconnect uses the SSL protocol, it won't have a problem on your environment.

  Below some information:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa84/configuration/guide/asa_84_cli_config/vpn_anyconnect.html

  Hope this helps,

  Luis.

• Calling the reports of forms in the same session.

  Hello everyone:
  
  I have a small question calling reports 6i Forms 6i form:
  
  When I call a report from Oracle Forms 6i with the RUN_PRODUCT command, the report asked running on another session as the appellant formula.
  
  
  I need call a report but in the same session of calling forms.
  
  is there a way to fix this?
  
  Best regards
  Pedro

  I need call a report but in the same session of calling forms.

  It is not possible. You can use the same user to call the report, but not in the same session. Forms and reports are two different products, so both have their own session. If you just did something in a form and want to make a report that reflects the changes you made, you need to commit these changes in forms first.

• Y at - it re Hello Forefox ability to make multiple calls at the same time as the Conference call? Talk to the whole family together?

  Great love to the people behind this wonderful addition! I also want to be able to call my family threw away and we all in the conversation together. It seems right now it's just a one called. Will there be the ability to have several people on a call at the same time?

  Hi, when firefox Hello usable only for a conversation between two people.

  multi-party videoconferencing is on the roadmap to long term, but it will take a lot of Engineering (Hello firefox is based on the webrtc standard which is a peer-to-peer protocol between two machines-multipart calls can be a rather difficult thing to understand on this basis).

• Hello everyone! I need an application where I can hand write or type and draw, all in the same...

  Hello everyone! I need an application where I can hand write or type and draw, all on the same page,.

  I'm taking courses in biology and chemistry and sometimes I need to draw and explain

  Can someone help me?

  Thank you!

  I need an application where I can hand write or type and draw, all on the same page, I'm taking courses in biology and chemistry and sometimes I need to draw and explain

  @manuelito.castro,.

  Discover the "Mobilenoter" application, that includes the possibility of ink in free form. If you need to be able to classify and organize your writings, Mobilnoter works perfectly with a single Note.

  -Doc

• My DNS server is not responding. I searched on the internet and many people have the same problem and

  I searched the internet and many people have the same problem and there are 1 million different web pages that deal with this problem.

  I've run several virus scans and removed all except modifier browser called "zwangi."
  I emptied the cache and set the IPv4, IPv6 auto settings and.
  Can someone help me here please?
  Thank you.

  This forum is for Microsoft Security Essentials.

  I suggest that you re - post here->

  http://answers.Microsoft.com/en-us/Windows/Forum/networking

  You can also Bing - dns server does not - and find answers like this->

  http://TechNet.Microsoft.com/en-us/library/cc787724 (WS.10) .aspx

• You can run Combat fs3 and fsx gold on the same computer?

  I am running windows vista (Service Pack 2) and fsx already loaded gold - now I wanted to add beautiful b17 of memphis but there is no compatibility with fsx so that it is compatible with combat fs3 I would load cfs3 as the basis to install b17. I know it is not possible to run two versions of fsx on the same computer and I worried if cfs3 fsx would corrupt each other it be someone knows it please?

  Hello

  You can install Microsoft B17 in compatibility mode to run older programs in compatibility mode check out the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Unfortunately, it is not possible to install combat fs3 and fsx gold on the same computer to the same computer.

• Are Microsoft Word and Microsoft Word Processer the same?

  original title: Word

  Are Microsoft Word and Microsoft Works Word Processer the same?

  Friday, October 1, 2010 19:56:09 + 0000, Duchness wrote:

  Are Microsoft Word and Microsoft Word Processer the same?

  No, not exactly.

  Microsoft Word is the name of a word processor of Microsoft.
  There is no product called "Microsoft Word Processer."

  Ken Blake, Microsoft MVP