Possible to use acroread for direct printing?

Similar Questions

• Is it possible to use EventListener for general use?

  Hello!
  Is it possible to send a parameter of a class to another? but I have a limit that I can't create an instance of this class within these classes and I can't do the functions or settings of these static classes. Is there some sort of class of earphone as EventListener, but for general use? or is it possible to use EventListener in general?

  Mad skills of Oracle really show in these forums...

  Published by: Kayaman on September 10, 2011 14:11

• OfficeJet 6700 Premium: Officejet 6700 Premium - Support for direct printing HP (Ad Hoc) wireless

  Please can someone confirm if you can set the to either ad hoc printing or using HP Officejet 6700 Premium Wireless Direct. I can't find anything in the user manual.

  The situation is that a friend has just moved into his own office with a connection high speed standard with a wireless router, in 'Serviced Offices'. These connections allow broadband to the office and he has to pay for a dial-up connection to the internet.

  So he paid for two ethernet connections which probably come out through internet gateway of the complex. However, he lost the ability to print at its 6700 HP that has been previously set up wireless. He tried to install the printer using infrastructure mode by connecting to the network without wire of the complex, but still can not access the printer. It could be that the wireless network is on a different network for LAN connections segment.

  The only solution I can think off is to let each PC with ethernet for Internet connection and install a wireless dongle in each PC to connect to the wireless printer. However, as noted above though I can't find the instructions for the Officejet 6500 to print Ad Hoc has nothing in the manual for the 6700.

  Is this possible?

  Fozzie

  ShlomiL wrote:
  

  Hello

  To clarify, the printer will support HP Wireless direct however with its latest firmware installed.

• Is it possible to use formulas (for example 'if' or VLOOKUP functions) in the "custom calculation Script?

  I'm working on a PDF form fill converted from MS excel. It is for others to use who do not have MS excel required to use my spreadsheet.

  1. I would like to know, how can we have complex formulas being the custom tab calculation script calculate under properties in a menu of cell?

  2. where can I find it that the formulas will work in the calculation script custom as well as the format of these formulas work properly (tutorials would help)?

  I tried to write an 'if' function but I get and error so I guess that is functions do not work in the script, or there is a different format of spreadsheet standard formats.

  Bruce

  .

  In this case the loop would be:

  for (var i = 0; i)< 8;="" i="" +="1)">

  sum += + getField("Total."_+_i).value;

  }

  So initially, the counter i is zero, so the domain name used with the getField method is:

  'Total': + 0, which results in the string "Total.0". At each iteration, the variable i is incremented by 1, so the following field names are the following:

  "Total.1".

  "Total.2".

  'Total.3 '.

  'Total.4 '.

  'Total.5 '.

  'Total.6 '.

  "World.7.

  The script gets the value of each field, it converts numbers and adds the number to the cumulation.

• Is it possible to use the vector for audio?

  I was wondering if was possible to use vector for audio instead of PNG buttons? I googled and searched and I guess that you can not... seems a little weird and it made my head :-) Even at double, I can't do my buttons look crisp to the retina.

  Thank you

  David

  Lol and I do not know what number you encounter on the retina, but I've had success

  double the size of the art, then it in InDesign.

• Anyone used Connect for people to vote on mobile devices together in the same room?

  I'm looking at the possibility of using Connect for in public voting room using the app to connect. Please let me know your experience of the present. How many devices you have used and how bandwidth is dealing with it.

  Thank you very much

  Peter

  Peter,

  Answer here: Adobe Connect user community

  Also, did you consult the Technical Guide 9 connect? There estimates of bandwidth for most of the features in connect.

• Adobe Flash maybe another app for Adobe Photoshop (for PRINTING)? Is it possible to use Adobe Fl

  Is it possible to use Adobe Flash instead of adobe photoshop to generate images for PRINTING?
  
  How about the CMYK settings? I have a problem with that? Please I need an expert at that too.

  N ° Flash would be one of the applications more bad substitute to Photoshop to create art for printing. If you use something other than Photoshop, you can use Illustrator, it is specifically designed to create artwork for printing.

  Flash has no direct method for CMYK output.

• Plans of work in PS CC can be also for print design? If not, is it possible to use photoshop with similar functionality?

  Plans of work in PS CC can be also for print design? If not, is it possible to use photoshop with similar functionality?

  As they don't understand the area of cropping and Bleedbox parameters so far that they are, in my opinion, useless in regards to printing.

  If you try to make prepress and correct page layout work in Photoshop, you can change to use the right tools for the task as Indesign.

• If I use a web font in my Web site can I use the same font for documents printed such as company car

  I'm a graphic designer who intends to design a portfolio Web site in Adobe Muse. I intend to use TypeKit web fonts to design my Web site. On the Web site completioin, I have plan to design business cards and my CV to match the look of my site. I would use the same fonts I've used on the Web site. Is it possible to use web fonts for printing purposes? If this is not the case, what usually people do in this situation. The last thing I want to do is use a font that "similar" to those used on my site.

  Hi redsoxfan15b,

  (I think I can have answered your ticket of Support of Typekit earlier today, but I'll post here the same information to be certain).

  We have recently added a new feature to Typekit that can sync your desktop fonts and use them in print design. The announcement on our Web site has more details:

  http://blog.Typekit.com/2014/01/16/the-fonts-you-love-from-Typekit-now-on-your-desktop/

  Font sync is available on any portfolio Typekit, Performance or Business plan.  Here is a list of all available fonts to use the Office to:

  https://Typekit.com/fonts?licenses=desktop

  We continue to pay more of the library to use the desktop, but for now, you must confirm the police you want it available for both web and desktop.  And if there is a font you want to use is not available for desktop synchronization, you can also buy a license directly from the foundry.

  I hope this helps; Let me know if you have any other questions!  Best,

  -liz

• Is it possible to use the internal clock for meter tasks in the buffer?

  Hello

  Hardware: USB term mass 6251

  Software: LabView 2011 SP1

  I need to measure the angular lever position and speed of a carpet. For that I use two quadrature encoders. To accurately calculate the speed I use buffered from the measures of position using one of the available onboard counters. I understand that for this technique, I provide a sample for the meter clock. I wonder if it is possible to use the internal time base. Note that both of my counters are used so I can't generate a signal to clock with them.

  I found two conflicting pages related to my problem:

  1) http://digital.ni.com/public.nsf/allkb/EA7FFFEAFC3E1D85862572F700699530

  2) http://digital.ni.com/public.nsf/allkb/775290A3121D1FFC862577140074D3B3

  The first says that I can use the internal clock of 100 kHz, and the other says that I have an external clock.

  Comments/solutions?

  Javad

  Hi Javad,

  On your specific device, there is not a direct route from the time base of 100 kHz for the meter (according to the routing table of MAX):

  

  Yellow cell indicates that a route is possible but there is not direct (the "gate" terminal is used as sample clock for counters of the M series).  Mouse on the cell reveals yellow that make this route really requires the use of a counter (so it is not suitable for your application).

  On the line above "100kHzTimebase" you will notice it is called 'FrequencyOutput', which does not have a direct route to the door.  This would be the way to go if you want to route 100 kHz (or some other frequency) as your sample counter clock - you can set it up the same way to a standard meter output task:

  

  The output frequency doesn't have that many features like a meter output, but it is able to generate a continuous stable frequency.  There are only 32 different frequencies that can be generated using Freq Out on the 6251:

  {10 MHz, 100 kHz} / {01:16}

  Do not forget that the resolution of your measure of frequency by using this method will be equal to how many times you update the measure (hopefully, that makes sense).  In other words, if at the end of all the 1 second, you take the total number of charges since the last second, you would have a 1 per second equal resolution change in the number.  If you take the difference twice per second, you would end up with half the resolution.  You will be sampling the account register fairly quickly, but you will need only to do the calculation of the frequency after that all N samples in order to obtain a significant number.

  Another method that will certainly give a higher resolution in less time at typical speeds of coders is to set up a measurement of the frequency (the counter will count the internal 80 MHz base time period your external signal and the pilot calculates the frequency based on the result).  This method uses only a single entry - so you can just feed the 'A' your encoder quadrature signal (the method will not work if you are interested in absolute position or direction).  Without using signals A and B together, you will be susceptible to noise (which is common to have a quadrature encoder) that you want to delete (perhaps by setting up a digital filter).  Finally, you want to set a reasonable timeout on your reader calls (which will be blocked until a period of your external signal occurs), and the error-200284 handle simply report "0Hz" to make sure that your program is still sensitive even without an external signal present.

  Best regards

• DIRECTIONS: Print screen / Screen Capture on Gateway Tablet PC w / Windows Vista for photos/videos of office & Active Windows

  I try to use the screen capture / print screen on my gateway Tablet PC...

  I follow Windows help & support, yet when I try to paste it into Paint, it only will allow me the option "paste from ' and not 'stick' in the ' Edit '...

  What I am doing wrong? Should I do it differently on Gateway Tablet PC?

  -J' I NEED HELP from USER to Capture screen-Still and video Capture on the Windows desktop screen and the Options in the Active window.

  * The use of Screen Capture (Print Screen) on Gateway Tablet PC with the Windows Vista operating system:

  I followed HELP & SUPPORT directions exactly...

  * Gateway Tablet PC keyboard print screen says/labeled "Ins" button and immediately under the same button says "PrtSc".

  * "Help & Support" said to

  -Press the print screen key.

  -Open "paint."

  -Click on "Edit", then

  -Click "Paste"...

  Try clicking / use the "Paste" option in the "Edit" menu in the "paint" will NOT work:

  When I click on "Ins" / "PrtSc" button on a Gateway Tablet PC for the screenshot, I have:

  -Open Windows 'Paint' accessory,.

  -I click on "Edit" in the menu "painting."

  -'Paste' option is unavailable / greyed out. It will only allow me the option 'Paste From'

  -Option 'Paste From' does NOT work

  If you press your print screen and then open Paint... What is happening
  If you type...    CTRL + V...?

  Have you tried the tool capture of Vista? It is more versatile than print screen.

  Windows Vista - activate the Vista Snipping Tool
  http://www.PCWorld.com/article/137099/activate_vistas_snipping_tool.html

  Use capture tool to capture screenshots
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots
  (Vista Home Premium, Business, Ultimate, Enterprise)

  Vista tutorial - How to use the tool captures of Vista
  http://www.Vistax64.com/tutorials/148532-how-use-Snipping-Tool-Vista.html

  Info on the video capture:

  Vista's Movie Maker can capture screenshots:

  Windows Vista - Movie Maker-
  Take and use a picture from a video frame in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/take-and-use-a-picture-from-a-video-frame-in-Windows-Movie-Maker
  Windows Media Player-
  Capture images from DVD in Windows Media Player or Real movie scenes
  http://labnol.blogspot.com/2005/11/capture-still-images-from-Windows.html

  VLC Media Player free software has also a good option for screen video capture...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  For the installer for your screen Capture... Open VLC and
  Reach... Tools / Preferences / video button / video
  Instant image section.

  In the directory field... Search for and select a folder
  to save your captures po (for example... you could
  Create a new folder on your desktop and select)

  TO... Prefix... check the box... Sequential numbering.

  TO... Format, choose JPEG or PNG.

  Finally... on the left, click on the Save"" button.

  Now... Play the video and pause by pressing on your
  SPACEBAR when you see a screen you want to capture.

  To capture the screen... type...  SHIFT + S

  Press space to advance to the next photo...
  ect... etc...

  Also... VLC Media Player... allows to save during video playback
  and will save the segment when you stop recording. It comes
  very useful if you need a small clip of a larger video file.

  VLC 1.0 records video of the DVD
  http://Lifehacker.com/5318807/VLC-10-records-video-from-DVDs

• HP Universal print driver: printers use duplex for single page documents

  Here's our environment: Print Server Windows 2008 with many different printers HP HP, using UPD. Customers running Windows 7 x 64.

  We configure default duplexing for environmental issues. When a single document page is printed, the printer uses duplex; After the printer page, it brings back the paper to 'print' the empty side of the single page document!

  We lack something hidden in the configuration of the printer? Or isn't smart enough to single-side print when driver/printer duplex is active and only need to print?

  Best regards

  Change the driver on the print server has solved the problem. I discovered that the "smart duplex" was working when printing directly to the printer (IP). We use v5.2 PCL 6 (61.112.1.9321). Changing to v5.9 PCL 6 (61.170.1.18326), which has solved.

• Direct printing of WIFI in Samsung Galaxy 3 Smartphone for a range of printers HP 8630

  I have a HP 8630 printer connected to my local network via a wired connection.  The printer works fine for computers on the same network with the printer.  What I call the 'normal' network

  I also have a Samsung Galaxy 3 smartphone using Android software 4.4.2.  I want to print directly to the printer from the phone using WIFI Direct.  I was not able to get this process works.  The smartphone is on the part "comments" of the network for security reasons.

  Can I use wireless WIFI Direct to the printer from the smartphone function when the printer is connected to my cable network 'normal '?  The router is a 3800 NETGEAR which has both wired and wireless capability.  The phone has the ability to «direct WIFI»

  Thank you

  Bob

  Hi there, take a look at this support document for the direct use wireless on the Officejet Pro 8630 to print from mobile devices.

  Hope this information helps.

  Best

• Is there a method of direct printing for the chiseled section?

  Original title: Snipping Tool

  I love this tool and use it quite often.  Have I missed something but, for when I want a copy of the capture, I go to Word and paste the snip in a new document, where it can be printed?  Is there a method of direct printing for the chiseled section?  Otherwise, would be MS please consider including it?  Are there other supported this idea, if any?

  Pelcaro

  Hello

  Correct the Snipping Tool doesn't have a print option.

  Use these resources to provide feedback:

  Microsoft Connect
  https://connect.Microsoft.com/

  Provide feedback to Microsoft
  http://www.Microsoft.com/mscorp/Execmail/feedback.mspx

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Link direct and wireless for HP4280 printer

  Can I connect my HP4280 printer directly to my computer and use it wirelessly with other computers in a network at the same time?

  OK, on the host computer, go to control panel > printers.  Right-click on the printer and select sharing.

  On the remote computer, download the latest version of the software for your printer from the "Support & drivers" link at the top of this page and install it.

  Sounds easy, but often it does not see the printer...