Is it possible to use EventListener for general use?

Similar Questions

• Tecra S1 - Possible to use the new Power Saver v7.11 for example?

  Hi all

  is it possible to use a more recent version of the saving on my laptop?

  I found for the Tecra S1 as the latest version of the v1.00.34M

  THX.

  Patrick

  Hello

  Of course, you can use a more recent version of Toshiba power saver, it's not a problem.

  On the Toshiba site, I can find version 1.00.33 for Tecra S1.
  However, download and install the latest version for your laptop and it will work.
  :)

  Welcome them

• Is Tecra A7 - possible to use this modem for fax purposes

  As long as Tecra A7 has a modem to connect to a telephone line, is it possible to use this modem for fax purposes?

  Hello

  Check the user manual.
  It is said:
  The computer contains a MDC, allowing data and fax communication.
  It supports ITU - T V.90. Transfer rates are and 14,400 bps FAX transmission.

  The modem controller features:
  …
  …
  For fax:
  V.34, V.17, V.29, V.27, and V.21 channel 2
  V253 fax class 1

  Seems that he supports the FAX feature

• Possible to use the main clock FPGA as a basic Source of time for the NI 9234?

  Hello

  I am running a NI 9234, and NI 9222 module on a cRIO-9114 chassis with a real-time 9022 controller, data acquisition on the 8 channels on the full sample rate, using the FPGA.

  My problem is the synchronization of the data, where the NI9234 is usually a late acquisition, compared to the NI9222. I tried manually delay the NI9222 to take the first samples, but so far without success.

  To solve this problem and also to ensure a rate of data more comparable on both cards, I was wondering is it possible to create a Source of time Base master for the NI9234 WITH THE FPGA (opposite to import from another NI9234 or similar module)? The NI9222 I already provide with sampling of the impulses from the FPGA (as expected with this module).

  Another issue would be the characteristics of the exact chronology of the two modules, including in terms of synchronization between the beginning of the acquisition and the first samples of data. I couldn't find any information about it...

  Thank you in advance,

  O Hoppe

  Hello!

  I've never heard of a possibility to use a time base FPGA with a module of Delta-Sigma.

  But I think that the question should be what has not worked to delay the signal and how you did it. Have you read this article?

  How can I compensate for delays of different group with the C Series Modules in LabVIEW FPGA?
  http://digital.NI.com/public.nsf/allkb/74EB238E1BCADD528625735300681A7D

  Can you give a more detailed description of your trial to delay acquisitions? Can you provide a code example?

  Best regards

  Christoph

• Is it possible to use Canadian spare battery in German for laptop - Y570?

  Hello community,

  I'm a trainee program at a University in canada. Naturally, I'm German.

  In Germany, I bought a Lenovo Ideapad Y570. I would buy a second battery for this camera.

  Is it possible to use a Canadian spare battery with this unit?

  -Because I don't want to buy in Germany and ship it to canada, I think that this is not common sense...

  Thanks for your replies.

  I don't think that lenovo made a laptop for the Germany and designed a notebook different to the Canada. I think you'd be very well just order a battery of the Canada.

• Is it possible to use the internal clock for meter tasks in the buffer?

  Hello

  Hardware: USB term mass 6251

  Software: LabView 2011 SP1

  I need to measure the angular lever position and speed of a carpet. For that I use two quadrature encoders. To accurately calculate the speed I use buffered from the measures of position using one of the available onboard counters. I understand that for this technique, I provide a sample for the meter clock. I wonder if it is possible to use the internal time base. Note that both of my counters are used so I can't generate a signal to clock with them.

  I found two conflicting pages related to my problem:

  1) http://digital.ni.com/public.nsf/allkb/EA7FFFEAFC3E1D85862572F700699530

  2) http://digital.ni.com/public.nsf/allkb/775290A3121D1FFC862577140074D3B3

  The first says that I can use the internal clock of 100 kHz, and the other says that I have an external clock.

  Comments/solutions?

  Javad

  Hi Javad,

  On your specific device, there is not a direct route from the time base of 100 kHz for the meter (according to the routing table of MAX):

  

  Yellow cell indicates that a route is possible but there is not direct (the "gate" terminal is used as sample clock for counters of the M series).  Mouse on the cell reveals yellow that make this route really requires the use of a counter (so it is not suitable for your application).

  On the line above "100kHzTimebase" you will notice it is called 'FrequencyOutput', which does not have a direct route to the door.  This would be the way to go if you want to route 100 kHz (or some other frequency) as your sample counter clock - you can set it up the same way to a standard meter output task:

  

  The output frequency doesn't have that many features like a meter output, but it is able to generate a continuous stable frequency.  There are only 32 different frequencies that can be generated using Freq Out on the 6251:

  {10 MHz, 100 kHz} / {01:16}

  Do not forget that the resolution of your measure of frequency by using this method will be equal to how many times you update the measure (hopefully, that makes sense).  In other words, if at the end of all the 1 second, you take the total number of charges since the last second, you would have a 1 per second equal resolution change in the number.  If you take the difference twice per second, you would end up with half the resolution.  You will be sampling the account register fairly quickly, but you will need only to do the calculation of the frequency after that all N samples in order to obtain a significant number.

  Another method that will certainly give a higher resolution in less time at typical speeds of coders is to set up a measurement of the frequency (the counter will count the internal 80 MHz base time period your external signal and the pilot calculates the frequency based on the result).  This method uses only a single entry - so you can just feed the 'A' your encoder quadrature signal (the method will not work if you are interested in absolute position or direction).  Without using signals A and B together, you will be susceptible to noise (which is common to have a quadrature encoder) that you want to delete (perhaps by setting up a digital filter).  Finally, you want to set a reasonable timeout on your reader calls (which will be blocked until a period of your external signal occurs), and the error-200284 handle simply report "0Hz" to make sure that your program is still sensitive even without an external signal present.

  Best regards

• Is it possible to use workflows to Train for the old masters in detail for CRUD operations

  Hello

  I use Jdev 11.1.2.3

  I have a use case of the implementation of paintings by master detail (a master and 3 Details) and I want the CRUD operation will end only when all the data are introduced. It is therefore possible to use workflows to train for this use case.

  Thank you

  The pb is solved, I just replace the Taskflow newPersonalDetail by a simple point of view and for the createInsert I am using invokeAction in the pageDef:

  Thank you

• Plans of work in PS CC can be also for print design? If not, is it possible to use photoshop with similar functionality?

  Plans of work in PS CC can be also for print design? If not, is it possible to use photoshop with similar functionality?

  As they don't understand the area of cropping and Bleedbox parameters so far that they are, in my opinion, useless in regards to printing.

  If you try to make prepress and correct page layout work in Photoshop, you can change to use the right tools for the task as Indesign.

• I have the license for both I and ps is possible to use at the same time in the differren computers?

  I have the license for both I and ps is possible to use at the same time in the differren computers?

  Please see this FAQ for more information:

  FAQ: Can I install Creative Cloud on several computers?

• It is possible to use my Windows Adobe Lightroom license for my new Adobe Lightroom Apple Mac Version?

  Hi all

  It is possible to use my Windows Adobe Lightroom license for my new Adobe Lightroom Apple Mac Version?

  Thank you for your support!

  Best regards

  U. B.

  Yes

• Is it possible to use the vector for audio?

  I was wondering if was possible to use vector for audio instead of PNG buttons? I googled and searched and I guess that you can not... seems a little weird and it made my head :-) Even at double, I can't do my buttons look crisp to the retina.

  Thank you

  David

  Lol and I do not know what number you encounter on the retina, but I've had success

  double the size of the art, then it in InDesign.

• I use a Mac.  I "upgraded" to of LR4 LR5.  I don't want to be a member of the "creative cloud."  I just want to use the software that I bought, more precisely to load on my SmugMug account.  Is it possible to use an add-on for this?  Opening and L

  I use a Mac.  I "upgraded" to of LR4 LR5.  I don't want to be a member of the "creative cloud."  I just want to use the software that I bought, more precisely to load on my SmugMug account.  Is it possible to use an add-on for this?  Opening and LR4 were easy, but I think it's impossible without subscribing to CC.

  do you mean that you get a page Adobe Adobe ID, wondering like that? If you have followed my second just method?

  

  If this is the case, this isn't an obligation to subscribe to the CC, but just a completely - a free Adobe ID, email and a password which can identify you.

  In fact, it is the same name of username/password used to log-in on this forum.

• Adobe Flash maybe another app for Adobe Photoshop (for PRINTING)? Is it possible to use Adobe Fl

  Is it possible to use Adobe Flash instead of adobe photoshop to generate images for PRINTING?
  
  How about the CMYK settings? I have a problem with that? Please I need an expert at that too.

  N ° Flash would be one of the applications more bad substitute to Photoshop to create art for printing. If you use something other than Photoshop, you can use Illustrator, it is specifically designed to create artwork for printing.

  Flash has no direct method for CMYK output.

• Possible to use acroread for direct printing?

  Hello

  I wonder if it is possible to use acroread for direct printing? Is it possible to use acroead to print a pdf file without having to open the pdf file?

  See you soon,.

  Yes, it is possible.

  Try the following command line to redirect the file postscript directly to

  the printer.

  acroread - toPostScript-pairs <-options>a.pdf - |-lp d

  The following command line creates a postscript on the PDF file.

  acroread - toPostScript - <-options>a.ps.pdf of pairs

  Use acroread-help to go through the different printing options from command line

  available.

  Kind regards

  Rishi

  Monday, June 7, 2010 at 15:21, bjorn.lanneskog@jeppesen.

• What is is it possible to use the acl extended for split tunneling on ASA?

  I'm setting up VPN IPSEC RA on SAA and I would like to know if it is possible to use the ACL extended as part of the split tunneling?

  Thank you!

  Yes, you can use the extended ACL. See this example:http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-nex...

  Kind regards

  Averroès.