post-its nav - position fixed does not work

Similar Questions

• Update iOS 9.3.1 fix does not work

  I updated my iphone 6 this afternoon with the new fix for ios apple posted 9. The new update, ios 9.3.1 is supposed to fix bugs in applications, but it still does not work! The links are still corrupt in safari, and my Gallery of photos, videos and instagram all still close without warning.

  My iPhone 6 s + is the same on 9.3 I would tap iCloud in the settings and it would open iCloud but immediately go back to the front where the icons are and close iCloud in settings before I had the chance to enter my id . Now with 9.3.1 is not different

• Update caused Windows Blue Screen of Death. Suggested fix does not work.

  In February, my Sony Vaio laptop has been updated automatically by Microsoft and now it does not start.  I followed all the instructions in this thread

  (http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1/#e9b28c45-635c-4adf-8d24-817bf39c207b)

  but when I get to the point where I need to type some commands, uninstall, My Favorites keys displayed on the screen and I'm unable to type the codes or move forward.  As you can tell long time between when this problem occurred and that now, I gave up in frustration for a while but I simply could not live without my cell phone any longer and I'd rather not pay someone to fix this.  Any ideas or suggestions?

  Hello subvertdonthurt,

  All if suggestions published in the forum http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1/#e9b28c45-635c-4adf-8d24-817bf39c207b do not work for you, do a restore of the system from the Recovery Console.

  Here's how:

  Step i. access the recovery by using the OS CD console. As already suggested, you must have your OS CD to repair. (Or the image that you created the instructions above).

  To run the Recovery Console from the startup of Windows XP or the Windows XP CD-ROM diskettes, follow these steps:

  Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
  Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
  When the "Welcome" screen appears, press R to start the Recovery Console and follow the process until you get to the recovery console command prompt.screen.

  STAGE II. At the Recovery Console prompt, type the following lines (in blue), and then press ENTER after.

  1 cd-(Note: between "cd" and "------" there should be an 'empty space' or still command does not work)
  2 cd system ~ 1\_resto ~ 1

  If it gives an error "Access denied" when accessing the folder, follow the method below

  CD.
  CD windows\system32\config
  ren system system.bak
  output

  Restart the computer, and then follow step I.

  3 dir

  When you hit it will list all records of points of restoration as rp1, rp2... we see the last restore point to copy the file from a recent backup. If the restore points have more than one page, then you keep pressing the key to display the last restore point folder. Use the other to the last restore point. (the last restore point is maybe damaged)

  4 cd rp {the next to the last restore point only.} (Note: example: cd rp9, if rp9 is the next to the last restore, point where the last restore point n = 9)

  5 cd snapshot

  Now, the command prompt will look like this c:\system~1\_resto~1\rp9\snapshot > ( Note: restore point 9A assumed for the clarity of the content, you must go to the next to the last restore point folder, as described in the previous lines) now according to the error message to copy the appropriate file in the restore point folder.

  6 copy _registry_machine_system c:\windows\system32\config\system
  7. Type Exit, and then press ENTER.

  I hope this helps.

• Download App error (previous fix does not work)

  Hello. I just bought a 12 month subscription to After Effects for $20 per month. I try to download and CC opens the Apps section. Initially he is stuck on an endless cycle of the blue spindle and then finally, it shows the download error page and the blue button does not say 'Reload Applications', it says 'Download Creative Cloud'. I don't know if it's just me being extremely oblivious or if something happens with the app. I'm on a Mac, too. This solution (Creative Cloud help |) Download error in the applications tab of Creative Cloud Desktop Application) does not work for me either. I have reinstalled many times.

  uninstall any cc.

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer

  Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud

  use the application to start the installation of first pro.

  Take a break or something.  If you look at the progress, you'll think there's a problem because it "s so slow.

• Satellite Pro 2100: Quick fix does not work with Win XP SP2

  pilots quickfix for win xp on my toshiba satellite pro 2100 does not say pilots should xp without service Pack 2.
  Are there drivers for Windows XP service pack 2?

  Please do not mix the pilots and quickfixes. Install Windows XP SP2 home edition on your laptop, install the drivers for the chipset, screen, sound, LAN and other hardware components.

  When you are finished connect your laptop to the Internet, make windows update, restart your computer, and enjoy your life.

• MRU multipath failover does not work, hangs host. Fixed does not work on CX500?

  Hi all

  Was pilferage user guides, forums, and powerlink and they all indicate that I should use MRU (most recently used) for multipath failover on a CX500 connected by a switch. The switch is zoned for 1A HBA path SPA0 and SPB1 and another for SPA1 and SPB0.  I had this set up with SRM as it is by default, and it worked very well; However, when I did the test of yank with cord fiber on each HBA, my hung ESX4 host and became unresponsive until I plugged the rider of the fiber in the HBA 'failure '.

  I then put it to 'fixed' and it worked like a charm. I also noticed that when the MRU value, I'd also get tresspassing on the LUN, so I believe "fixed" is the way to go.

  I was wondering what others have seen... Until now, I can tell, the CX500 is an active/passive system without load balancing only occurs if you are using powerpath on the host...

  Hi liam,

  II don't know if I understand you correctly, you have only one box for each HBA? It is only a recommendation, but I prefer an area for each HBA and SP, for example: (I assume that you have two fabrics)

  0 SWITCH

  area: HOST1_HBA0_CX500_SPA0 on HBA0 with SPA0

  area: HOST1_HBA0_CX500_SPB1 on HBA0 with SPB1

  SWITCH 1

  area: HOST1_HBA1_CX500_SPA1 on HBA0 with SPA1

  area: HOST1_HBA1_CX500_SPB0 n HBA0 with SPB0

  Check it out in your CX500 all paths (four) are recorded and logged. (check the status of the connectivity on your navisphere)

  have you checked matrix emc for your host and HBA? What HBAS do you use?

• Disable iMessage app (Mac) when I hit iMessages on iPhone (El Capitan - Notifications fix does not work)

  I think that this question is a little different from the others posted. I am not connected to iMessage on my phone. I think my MacBook is my Apple ID associated with it, but I've not logged in the App, and I already turned off all the boxes of banners/badges/alerts and unchecked everything in system preferences > Notifications menu.

  However, the question that I find annoying, everytime I go to iMessage on my iPhone application appears at the bottom of the screen on my Mac, even if I am not logged in. Exit iMessage on my iPhone and it disappears on my Mac. There is nothing in common with my Mac, but its boring whenever I'm Messaging on my iPhone application appears on my MacBook, and I watch my Mac to see whats moving on the screen but its just letting me know that I have the app open on my iPhone iMessage. Does anyone know how to disable this feature?

  I just want it to be completely gone and not follow when I open the iMessage app on my iPhone. Does anyone know how to do this?

  Thank you!

  Hi James b. Moore,.

  If I understand your question, whenever you use the Messages app on your iPhone, you will see it appear on your Mac and you do not want the application on your computer, right?

  Looks like you have the characteristics of continuity enabled on your Mac.  The resources below will explain how to disable features such as transfer to separate the activities of your Mac and iPhone.

  Continuity of use to connect your iPhone, iPad, iPod touch and Mac

  Transfer procedure

  With the transfer process, you can start a document by e-mail or message on a device and pick up where you left from another device. Transfer works with applications Apple such as Mail, Safari, maps, Messages, reminders, calendar, Contacts, Pages, Numbers and Keynote. Some third-party applications are also compatible.

  Disable the transfer procedure

  If you want to disable the transfer on your iPhone, iPad or iPod touch, go to settings > general > Handoff & suggested Apps. Can disable Handoff.

  On your Mac, go in system of preferences > General. Can uncheck the setting allow Handoff.

  With continuity, all SMS and MMS text messages that you send and receive on your iPhone may also appear on your Mac, iPad, and iPod touch. You can also meet your contacts from any device is closer to you, including your iPad or Mac.

  You can start a conversation in the Messages application or click on a phone number in Safari, Contacts, or calendar.

  Set up SMS and MMS with continuity

  1. You need to iOS 8 or later version on your device iOS and OS X Yosemite or later version on your Mac.
  2. Connect to the iMessage with the same Apple ID on your iPhone, your other iOS devicesand your Mac.
  3. On your iPhone, go to settings > Messages > Send and receive. Add a control to both your phone number and email address. Then go to settings > Messages > text Message Forwarding and turn on the device or devices that you want to transfer the messages.  (Disable this function if you want no messages will appear on your Mac.)
  4. Looking for a code on the Mac, iPad, or iPod touch that you enabled. Then enter this code to check on your iPhone.

  Take care

• Why photoshop fix does not work on my iPhone?

  Everytime I open photoshop fix boot me end of a minute. everything is up to date so I don't understand why it won't work.

  Hi there emih127775!

  I'm so sorry about this frustrating experience... Please let me know some info and we can go from there:

  -What type of iPhone do you use? Update iOS do you use?

  -Are you connected to wifi or use data?

  -You receive any type of error message when you get started?

  Please try to delete the app, reboot your phone and reinstall the application.

  Let me know if that helps!

  -Kathleen

• 13 September fix does not work for me

  After September 13, we have edited and rebuilt our v31 App App version is 999365. We submitted and approved it at Apple before iOS 8 release. When iOS 8 came out, we started to receive complaints on the app, users have lost previously downloaded folios and, what is more important, could not download again because of an error. I checked this, updated the application and then updated to iOS, and I can confirm it. Solution here is that a - remove the app and install it again. The public of our application is approximately 150000. Are you push a message about reinstall the app and lose all downloaded folios, or there is another solution?

  Thanks, now I see where is the problem. Apple has approved an old building, we downloaded early September. At the same time, I see in iTunes Connect, my new build is posted and available. Very strange situation, I sent to new request for accelerated examination.

  

• ERROR 737D FIX DOES NOT WORK

  I WENT THROUGH THE STEPS AND HE ASKED FOR A DISC.  PUT MY WINDOWS VISTA DISK IN AND IT CAN'T FIND THE FILE IT NEEDS.  CAN YOU HELP ME

  Are you referring to the error you get with the SQL Server Setup program?

  What measures do you have?

  +site:Microsoft.com&RN=SQL+Server+Setup+%26+upgrade+forum http://social.msdn.Microsoft.com/Search/en-US/?Query=737D&RQ=meta:Search.MSForums.forumid (5bc30920-5d3c-4a4e-8672-ff97b0e9252f)

  Have you checked SQL Server Setup & Upgrade
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

  Are you referring to the solution in French-
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/thread/73bbe749-2cfc-4D2E-a48c-a084a52b8801/ TaurArian [MVP] 2005-2010 - Update Services

• Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D. Hotfix does not work/run

  I am running windows 7 ultimate, 64-bit, SP1

  The screen savers say they can't run, they need a new video card, or a compatible with direct3d.

  I ran the fix.  The issue is pending. Hotfix: KB2159238

  http://support.Microsoft.com/kb/2159238

  All of the video drivers are up to date and they support Direct3D.

  Seems a lot of people have this issue - how to fix? Yet once again, the fix does not work (says "this update is not applicable to your computer")

  

  

  Hello Dave,

  Thank you for your response.

  I appreciate your time and your concern.

  It is normal that the fix is made for the Windows 7 version without service pack 1.

  I hope you can try the following methods provided in the previous post.

  However, if the problem persists, I suggest you to uninstall and reinstall display drivers.

  Step 1:
  Uninstall the display driver.

  a. Click Start, type Device Manager in the start search box and press ENTER.
  b. expand 'graphics', right-click on the map and click Uninstall.
  c. restart the computer, if the prompt message.

  Step 2:
  Install the latest driver to display from this link:
  http://66.226.78.22/DownloadSite/drivers/Intel/VGA/VGA (v15.33.31.64.3993) .zip

  For reference:
  http://www.ASRock.com/MB/Intel/B85M-ITX/?cat=download&OS=Win764

  Please keep us updated on the status of the issue.

  Thank you

• Error message: Mr Fixit does not not on computer, need to update, when trrying to download and run Mr. Fixit.

  Original title: Mr Fixit?

  I tried to download and run Mr. Fixit several times. It downloads and then I get a message that Mr Fixit does not work on my system that I need to upgrade. I am running windows 7 Premium now. My I missed something.

  Hi Williamrhodes jr,

  1. what Fixit you try to run?

  2. where did you downloaded the Fixit of?

  3. are you able to run another Fixit with no problems?

  4. What is the exact problem you are facing with Windows 7 computer?

  If you are facing problems running Microsoft Fixit, then try posting your query in the Fixit forum for assistance:

  Microsoft Fix it Center Forums

• FLASH PLAYER 10.3.183.7 DOES NOT WORK IN FULL SCREEN

  FAO: MR. CHRIS CAMPBELL

  Hello Chris

  You probably get this from all angles, but the most recent update for Flash Player (10.3.183.7) JUST DO NOT WORK CORRECTLY.

  I keep my browsers updated and as of today (5 September 2011) Flash WORKS in "small pane in the browser" mode (for example, in Youtube) BUT VA VIRGIN AS SOON AS LARGER.

  Note that overlay the legends and pause / graphic reading DO all the work - it's only video decompression that is not - leave black and white screen.

  It's FireFox 7.0 both last Google Chrome: I carefully uninstalled & replace Flash form the links you have posted here and IT STILL DOES NOT WORK in full screen.

  You must release really NO new version of automatic update code like this that are not properly tested: it has mucked up watching a video for millions of people unnecessarily.

  Because of the new accelerator support?   who knows.    It's a living environment, the Toshiba Satellite Pro (we do not have all go and buy new PC every 10 weeks like you developers do) and it has a P4 and the integrated graphics card Intel 82852 standard: perfectly fine until last week.     But it has 64 MB graphic and I see that 10.3.183.7 now 'requires' 128 MB?       You can not just make assumptions like that: I bet that there are 50 million more RAM VGA PC there with 64 MB (or less).

  Adobe is a great product, but it is a complete and total ball * ls - up like we in England is called: Please excuse my Anglo-Saxon franchise.    Sorting, please.

  Mike, London, exasperated

  Hi Mike,.

  You could run into problems of video acceleration here.  I apologize and we do not have an internal bug against it (bug #2950542), which will be fixed in the next version of Flash Player.  In the meantime, you can try turning off hardware acceleration to see if that makes a difference?

  How to disable or enable hardware acceleration?

  Thank you

  Chris

• Satellite A7330 S75Dt - keyboard backlight does not work

  Hello

  recently I bought this laptop A7330 S75Dt with windows 8, and after 2 days, the backlight of the keyboard has exploded.
  The Fn + Z combination indicates it's on and it should work, but it's not.
  I don't need it but its irritating that it does not work. I hope someone can help me.

  Thank you
  Luk

  Go to the BIOS by pressing the F2 key while under tension.
  Then go to advanced-> configuration of the system and check if the lighting of the option is enabled.

• Password for KB888111 patch does not work.

  Original title: 888111 KB

  Password for the KB 888111 fix does not work

  Any suggestions?

  Hi RonBello,

  1. what service pack is installed on the computer?

  I suggest you to ask again for the fix and verify if the new password works.

  Also, take a look at the following link:

  How and when to contact Microsoft and support Customer Service

  I hope this helps.