Pots to deploy a standalone JAR of the Web Service Proxy?

Similar Questions

• How to change IP address of the web service proxy.

  Hello
  
  I created an AppModule and expose as a serviceInterface. I deployed this project in the server and then created the Web service proxy by giving the IP address of the server in WSDL.
  
  Now I have deployed the same application in different server and manually change the IP address of the proxy Web service methods. But he's still point to the previous server.
  
  I don't want to regenerate the web service proxy. Is it possible to manually change the IP address in the generated Web proxy service method? Or I have to regenerate their?
  
  Thank you
  Rohit

  chk
  Configure endpoint URL in WebService DataControl and Proxy

• Unable to connect to the Web Services Proxy/unused (a HP 7500 JO)

  Hello

  Here's the situation:

  Previous installer:

  .  I have connected my 7500 for the corporate network (IP = 172... series)

  .  registered the product with ePrintCenter

  .  used a PC under Windows to print (and scan) with the printer

  .  web proxy entry "webproxy.phila.gov".

  .  However, because homeland security rules, I could never work, so I just let it go

  Current situation

  .  has taken the home printer and set up on my home network, i.e.,.

  -using the 192.168.xx.xx series

  -Router broadband Netgear ' G' (1 years) set up at the 192.168.xx.254

  -SSID & encryption assigned

  -printer, the value 192.168.xx.155 (static IP address, the subnet and the gateway assigned as well)

  -My DNS is identical to the bridge and it works fine for all the internet access to this day

  -with the help of a PC and a Macbook Air to print and scan and everything works fine

  .  HOWEVER,.

  -Initially, 'web services' were active (carried over from when I was on the company neetwork?)

  ..  Are looking for, found and downloaded updates

  -When I went to hp.com ePrintCenter he showed the product as 'registered '.

  ..  He would'nt I would like to connect (with a name and a password I had used previously), or create a new account

  ..  I never remember getting an email address of the printer

  ..  and I had never been able to send anything to the printer to print because of my problem of network security

  -Yes, after trying all sorts of things, I:

  ..  I tried to get another email without success

  ..  tried to re - enable web services, but he said I need to 'proxy', and I discovered that he had always "webproxy.phila.gov."

  ..  I have reset the values by default web services and network values

  ..  I put the static IP address return address in (i.e., printer, subnet and gateway (it has nowhere to put in a DNS one))

  ..  printing and scanning to 192.168.xx.155 works fine

  ..  From my iPad AirPrint works very well

  .  BUT, I still can not online and therefore web server, web services are not enabled, therefore not ePrint

  -everytime I try, it says it needs a proxy

  - but I don't have a proxy installed on my internal home network bit

  -Comcast/Xfinity, my ISP, do not use a proxy

  So, I'm dead in the water.  I can't figure out how to get the web services enabled; I do not use a proxy, so I don't know how to go beyond this issue. How to regenerate address of the printer; and so, how do I connect an account on the ePrintCenter (or get them to send me my old account information).  I'm dead in the water and cannot use a feature most of my printer that I desperately want to be put in place and functional.

  Any help would be greatly appreciated!

  Tommy

  Problem solved, but I don't know exactly how I did it. However, I went back in and let the printer assign the IP address. Then I turned the printer off and on again. Last I kept pressing the button "Printer e-mail address", who has repeatedly failed, but then finally went through and print the 'printer' page, I quickly used to connect to the ePrintCenter and put everything in place.
  
  Now it's working.

• Cannot create the web service proxy in jdeveloper

  Hi all
  
  I'm unable to create a proxy web service by using the URL of the web service (https://domains.live.com/service/managedomain2.asmx?wsdl). I get an error saying "no WSDL not could be found. I am able to open the same URL in the browser. As the web service is secured by SSL, do I need to add anything on the jdeveloper to access this web service? Help, please
  
  
  Note: The web service must be called on https
  
  -MJ

  Hello

  The parameters are the proxy settings that are necessary for JDeveloper to connect to external sites - other than those available in the internal intranet.
  To connect to internet/external sites, you must have for this parameter. Here, as you try to connect to the external site - Windows live, you will need these settings.

  Thank you
  Nini

• Cannot find the data control to the Web Service in the Menu

  Hello
  
  I try to call a web service in the ADF. To do this, I want to create a web service data command
  
  If I understand correctly, if I right click on the template project, I see the data control from the Web Service under layer Business > Web Services. (as indicated in 2.1 Sec-http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html#WsProxyPojoControl)
  
  However, I am not able to find this entry in there.
  
  I tried the following things:
  
  I tried with Jdev 10.1.3.5, 10.1.3.4 and 10.1.3.1
  I tried to select all available models of technology to create applications
  -Any model
  -Web Application [JSF, EJB, Toplink]
  -Web Application [JSF, ADF]
  -Web Application [JSF, EJB
  -Web Application [JSF, Struts, ADF]... .and everthing else...
  
  I still don't see the web service proxy.
  
  Then I opened the ADFToystore sample application, and I could see the service data Web controls here!... .that mean my jdev is not defective... something else is missing.
  
  So, I tried to see what libraries are selected... I saw that a library named 'Web Service Data Control' are there in the project, which is not there in the model applications project that I created. So I added this library to the project, but it still does not work...
  Next, I added all THE libraries I have seen in the libraries in the project properties section... still no luck
  
  I don't know I'm missing something basic. Can someone please help.
  
  Rgds,
  Amit

  Hi Amit,

  try to set the filter above in New Gallery to filter by: all Technologies

  Kind regards

  Branislav

• deploy the web service to xp embedded

  Hi all

  I struggle to run a web service on an xp embedded system. The web service works very well in my LV 2011 development environment and I have created an installer for my main application it is the lvws file is included as described in web services FAQ:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7747#toc12

  After the installation on the target computer, I can't access the web service. Also if you call localhost:3580, then I get an access error.

  But in the System Control Panel administrative tools, I can see that the server system OR like many Web server OR Web applications are started.

  For further investigation, I added the 'Distributed System Manager' to my Installer. With this tool, I see that all my web services deployed on my development system, but on the XP embedded system with TEN target is listed.

  I installed my application for a professional reference XP system to exclude that the problem is caused by embedded XP. But the behavior is exactly the same. So far, I tested only local so that settings security like firewalls and ports system should pose no problems. But to be sure I have disabled the firewall without success... I can't access the Web service. I have often found the suggestions in the forum to check if the web service is enabled. But I am not already and then access to http://localhost:3580.

  Any ideas?

  Thank you!

  This help document is somewhat outdated.

  You see 2 different problems: 1) you can not display the Configuration utility and do not install Web using localhost:3580 2) your web service monitoring.

  For the first number-->

  You probably did not understand the "Interface Web NI 2011 infrastructure" in your Setup program.  The doc to help you mentioned does not tell you to do, because it is not necessary for your web service works. However, if you want to change one of the settings of your web server after the installation, you will need this extra setup program.

  For the second question-->

  You probably didn't get your Spec to build Web services as a source file in your Setup program.  The help doc says to put your LVWS file as your installation source, but this is not correct. You must include the technical article to build real web service as a source file (not the web service create out of spec files, like LVWS).

  Let me know if any of these will help you.

  -Jared

• Fail to create the web service with the type of data defined by the user using the jwsc Ant task!

  Hello everyone!
  
  I used JAXWS to create WSDL from a file of Jehovah's witnesses.
  
  It's my TJ:
  -----------------------------------------------------------------------------------
  package ws;
  
  Import javax.jws.WebService;
  Import javax.jws.WebMethod;
  ws import. MyDataType;
  
  *@WebService*
  * public class MyWebService {*}
  public MyWebService()
  *{*
  *}*
  *@WebMethod*
  public MyDataType MyWebMethod (MyDataType mdt)
  *{*
  * / / mdt.setS ("I got it!"); *
  return mdt;
  *}*
  *}*
  -----------------------------------------------------------------------------------
  
  
  and this is my type of data:
  -----------------------------------------------------------------------------------
  package ws;
  
  * public class MyDataType {*}
  
  
  String ^ s;
  public MyDataType()
  *{*
  
  *}*
  * public String getS() {*}
  return s;
  *}*
  
  * Sets public Sub (String s) {*}
  This.s = s;
  *}*
  *}*
  -----------------------------------------------------------------------------------
  
  
  
  and that's my Ant build.xml
  -----------------------------------------------------------------------------------
  * < by default of the project = "all" > *.
  * < property name = "weblogic.jar.classpath" value="D:/Projects/bea103/wlserver_10.3/server/lib"/ > * "
  * < taskdef name = "jwsc" classname = "weblogic.wsee.tools.anttasks.JwscTask" > *.
  * < classpath > *.
  * < path id = "weblogic.classpath" > * "
  * < pathelement path = "WEBLOGIC_HOME" / >. *
  * < fileset dir = "${weblogic.jar.classpath}" > *.
  * < include name = "weblogic.jar" / > *.
  * < / fileset > *.
  * < / path > *.
  * < / classpath > *.
  * < / taskdef > *.
  * < target name = "all" depends = "clean, build-service" / > *.
  * < name target 'clean' = > *.
  * < delete dir = "output" / > *.
  * < / target > *.
  * < name target = 'build-service' > *.
  * <!-add jwsc and related tasks here - > *.
  * < jwsc srcdir = "" destdir = "wsoutput" > * "
  * < jws file = "MyWebService.java" type = "JAXWS" / > * "
  * < / jwsc > *.
  * < / target > *.
  * <!-< target name = "deploy" > - > <! - add wldeploy task here - > <!-< / target >-> *.
  * < / project > *.
  -----------------------------------------------------------------------------------
  
  I have run the Ant task, but I get this error:
  -----------------------------------------------------------------------------------
  BuildFile: build.xml
  
  clean:
  
  build service:
  [jwsc] TJ: processing module /MyWebService
  [jwsc] The analysis of source files
  [jwsc] The analysis of source files
  [jwsc] 1 TJS files processing for the module /MyWebService
  * [jwsc] [JAM] WARNING: could not resolve class MyDataType *.
  [jwsc] TJ: C:\Documents and Settings\samimi\IdeaProjects\SampleWebService\src\ws\MyWebService.java valid.
  [jwsc] Treatment of the web services JAX - WS 1...
  * [jwsc] error: couldn't get TypeDeclaration for: MyDataType apt tour: 1 *...
  ...................
  BUILD FAILED
  C:\Documents and Settings\samimi\IdeaProjects\SampleWebService\src\ws\build.xml:
  19: weblogic.wsee.tools.WsBuildException: JAX - WS web services processing error
  -----------------------------------------------------------------------------------
  
  Please help me solve this problem.
  Thank you
  Mojir

  I tried to compile your source code and received the same exception.
  However after compiling the MyDataType.java before running the jwsc task, I was successfully able to build the service.

  Please try the ant script below and let me know the result:

  **
  *     *
  **

  
  
  <>
  srcdir = "${source.dir}" "
  DESTDIR = "${Build.dir} '"
  keepGenerated = 'true '.
  classpath = "${Class.Path} '"
  Debug = 'true '.
  verbose = "false" >
  
       

  
            
  

  Thank you
  Sandeep

• URL of the Web Service, LV2013 vs LV2012 length limits

  (* CROSS POST: http://lavag.org/topic/18435-web-service-url-length-limits-lv2013-vs-lv2012/ *)

  (* Please answer in this forum.  I scored the other thread for responses here. *)

  A that someone noticed a reduction in the limit on the length of the URL for the Web Services between the versions of LV 2012 and 2013?

  Under LV2012, a RESTful web service seems to accept URLS with lengths at least as long as 4096 characters.  With LV2013, the maximum length of URL seems to be 511 characters for RESTful web services as the project item. Unfortunately for me the project, I have converted just travel on this issue. My goal with posting this request here is my understanding of this limitation before deciding the best way to modify my code.  Certainly using POST instead of GET with a long URL is an option, but again, I am looking to understand the change in limitation before choosing a solution.

  To illustrate, I enclose three projects for the most part identical, demonstrating the issue.  In each case, the project contains a webservice consisting of a single VI, 'ComputeLength', which takes a string as an input parameter and that returns the length of the string.  The three projects are the following.

  1 LV2012 RESTful WebService.

  2 LV2013 RESTful WebService.

  3 LV2013 article project web service.

  The web service contains a single VI.  For the relaxing examples, the web service is started by selecting deploy menu of right-click Build specification.  For the example of project item, the web service is started by selecting start in right click menu position of work/WebService. The use of this example is shown with the following URL:

  (Note that the port is 8080 for both relaxing examples and 8001 for the project web service point if used in debug mode, which is the default value for the statement above.)

  http://localhost: 8080/webservice/computelength? string = 1234567890

  And the output looks like this.

  Workaround.  Apparently from 2013 of LV, there is a default limit of 512 to the length of the URL.  The default limit can be overridden as described below.

  Martin

  He is Brian in the technique of applications for National Instruments. I am following up about the 511 character limit in your Web Service HTTP request after the port number. After some research, I realized that the problem is related to a web site by default, the setting of the server called "LimitUri", which limits the maximum length of a URL. The default is 512 characters long that's why we are seeing this problem.

  There are several ways to modify the URL length limit depending on how you use your web service. If you publish the web service using the Application Web Server can change "C:\Program Files (x 86) \National WebServer\NIWebAppServer.conf" and add "LimitUri 4096" at the end of the file without the quotes.

  If you run the Debug Web server simply by clicking start on the web service, and then change "C:\Program Files (x 86) \National 2013\resource\webserver\niwsdebugserver.conf" and add "LimitUri 4096" at the end of the file without the quotes.

• How to call the web service?

  Hello

  I want to know how to call the web service from my application HTML5 & javascript.

  Please help me find this detail as what I can access easily. and I want to access web services online (a method of it) I'm not concered with how background Web service takes place.

  I just want that when you call a web service method, I will return the result.

  Please try this out for a WebService call

  var xmlhttp;
  xmlhttp = new XMLHttpRequest();
  xmlhttp.open("get","your url",true);
  xmlhttp.setRequestHeader("Accept","application/json");
  xmlhttp.setRequestHeader("Content-type", "application/json");
  xmlhttp.onreadystatechange=function() {
   if (xmlhttp.readyState==4) {
    if (xmlhttp.status == 200) {
      console.log(xmlhttp.responseText);
    }
   }
  }
  xmlhttp.send();
  

  This will display the result of the invocation of webservice. The url is the application that you deploy and the type can be get/post. If xmlhttp.send (post) takes argument for the display of the data. You can call it by clicking a button in HTML.

• Update the password for the Web service fails

  Hello

  OIM 11 g R2 (11.1.2.2) does not update the user password using the web services (version 11.1) connector.

  Following Oracle instructions described in http://docs.oracle.com/cd/E22999_01/doc.111/e38352/extnd_func.htm#CIHHJCHA

  In fact, it works in a test environment.

  Caused by: org.identityconnectors.framework.common.exceptions.ConnectorException: org.identityconnectors.framework.common.exceptions.ConnectorException: java.lang.IllegalArgumentException: invalid combination of offset/length

  at org.identityconnectors.genericws.utils.EncryptionUtil.encrypt(EncryptionUtil.java:81)

  at org.identityconnectors.genericws.utils.ConversionUtil.typeCast(ConversionUtil.java:247)

  at org.identityconnectors.genericws.GenericWSConnector.update(GenericWSConnector.java:387)

  ... more than 224

  Caused by: org.identityconnectors.framework.common.exceptions.ConnectorException: java.lang.IllegalArgumentException: invalid offset/length combination

  at org.identityconnectors.genericws.utils.EncryptionUtil.deriveKey(EncryptionUtil.java:100)

  at org.identityconnectors.genericws.utils.EncryptionUtil.initializeCipher(EncryptionUtil.java:108)

  at org.identityconnectors.genericws.utils.EncryptionUtil.encrypt(EncryptionUtil.java:59)

  ... more than 226

  Caused by: java.lang.IllegalArgumentException: invalid offset/length combination

  to javax.crypto.spec.SecretKeySpec. < init > (SecretKeySpec.java:148)

  at org.identityconnectors.genericws.utils.EncryptionUtil.deriveKey(EncryptionUtil.java:98)

  ... more than 228

  Enjoy your valuable advice!

  Best regards

  JD

  Resolved:

  Problem solved in reconfiguring connector WS with files bundle good connector - apparently, jars of installation used was not the last!

• How to get the IP address of the calling client to the web service built in Jdeveloper 11.1.1.7 application?

  I built an application of web service in Jdeveloper 11.1.1.7 to be used by other clients. Just the General steps as follows (Server web service Application is generated--> deployed on the server-> used by clients with the location of the WSDL file).

  Now, I met a requirement where I need to get the port number and IP address for the client.

  Questions :

  How to get the IP address of the calling client to the web service application generated in Jdeveloper?

  Commune technologies used to build web service applications is AXIS or CXF. What Jdeveloper technology use to built web service application?

  The common technologies used to build web service applications is AXIS or CXF. What Jdeveloper technology allows built web service application?

  It depends on the option selected during the creation of web services (if I remember correctly, there are several options, style J2EE 1.4 RPC style JavaEE JAX - WS 1.5,...)

  For example, to get the ip address of the compatible with jax - ws web service, you need to inject the context in your service class with:

  @Resource
  WebServiceContext wsContext;
  

  and then inside your method:

  MessageContext mc = wsContext.getMessageContext();
  HttpServletRequest req = (HttpServletRequest)mc.get(MessageContext.SERVLET_REQUEST);
  String ip = req.getRemoteAddr();
  

  Dario

• Call to Web Service of Oracle PL/SQL not to call the Web service in SOA Server

  Hello

  Try to call the Web service to oralce pl/sql function

  created a function

  Unable to invoke the web service from the server of the SOA.

  CREATE or REPLACE FUNCTION HelloWorld_WebServices(S_STRING Varchar2) RETURN VARCHAR2 as

  Server sys.utl_dbws. SERVICE;

  APPEL_ sys.utl_dbws. CALL;

  service_qname sys.utl_dbws. QNAME;

  port_qname sys.utl_dbws. QNAME;

  response sys. XMLTYPE;

  application sys. XMLTYPE;

  BEGIN

  sys.utl_dbws.set_http_proxy ("hostname: Port'");

  service_qname: = sys.utl_dbws.to_qname ("ns1", "process");

  Server: = sys.utl_dbws.create_service (service_qname);

  APPEL_: = sys.utl_dbws.create_call (server);

  sys.utl_dbws.set_target_endpoint_address (APPEL_, ' http:/host name: port/soa-infra/services/OFS/HelloWorld/helloworld_client_ep ');

  sys.utl_dbws.set_property (APPEL_, 'OPERATION_STYLE', 'process');

  asks: = sys. XMLTYPE ("< ns1:process xmlns:ns1 ="http://xmlns.oracle.com/OFSOrderServices/HelloWorld/HelloWorld"> < ns1:input > < / ns1:input > < / ns1:process > '"); 

  answer: = sys.utl_dbws.invoke (APPEL_, request);

  return response.extract('//HelloWorld/child::text() ','http://xmlns.oracle.com/OFSOrderServices/HelloWorld/HelloWorld'). getstringval(); 

  DBMS_OUTPUT. Put_line ("values of the OutputsVariables8");

  -Of return ';

  END;

  Run - the code below:

  Select HelloWorld_WebServices ('Hi') to double;

  Error:

  ORA-29532: Java call terminated by eception Java exception: java.lang.NoClassDefFoundError

  ORA-06512: at "SYS." UTL_DBWS', line 403

  ORA-06512: at "SYS." UTL_DBWS', line 400

  ORA-06512: at the 'APPS '. HELLOWORLD_WEBSERVICES', line 74

  29532 00000 - "Java call terminated by eception Java exception: %s."

  * Cause: A mistake or a Java exception has been reported and could not be

  solved by Java code.

  * Action: Modify Java code, if this behavior is not expected.

  Hello

  Fixed the error

  After loading once again of DBA and network provided access files JAR/JVM firewall

  and the correction on the threshold

  Return response.extract (' / result/child::text () ','xmlns = "http://xmlns.oracle.com/OFSOrderServices/HelloWorld/HelloWorld" '). getstringval();

• Getting chain of fault in the Web Service response

  Hello
  
  I developed a Web Service and deployed to the Glassfish server. When I try to call the web service a few times I am getting following error
  

  <faultstring>String index out of range: 0</faultstring>

  What is the meaning of this? How to solve this problem?
  
  
  
  Kind regards
  Ajay Sharma

  Each cal with values that do not cause a chain index to be out of range or change the webservice to hear the case which causes this differently. Anyway the point of departure is to discover where in webservice String index is out of range.

• Data custom provider to invoke the Web Service

  Hello!
  
  When an order is created in OSM we invoke a Web service from the drive section rule of data via a data Instance in the component of the system of recognition of orders. In this way, we could produce a plan of orchestration that evaluates the information returned by the Web service.
  
  So we did research on data providers in the developer's Guide that says "a data custom provider when the provider is a class is part of the Design Studio project developed as part of a solution. It must implement the provider com.mslv class. oms.view.rule.ExternalInstanceAdapter interface.
  
  in the javadocs that we refer to the Interface ExternalInstanceAdapter, we find the details of the method:
  org. W3C. DOM. Element retrieveInstance(ViewRuleContext context, < java.lang.String, java.lang.Object > java.util.Map parameters)
  
  The developer's Guide also found that compiled class adapter must be added "the file in archive customization.jar oms.ear application" because it is necessary to decompress the osm.ear
  
  In this search for information I have do to reach my cartridges PIP research objective more precisely the 'CommunicationsSalesOrderFulfillmentPIP' project and found there a Custom Data provider exactly like 'OsmWebServiceAdapter' required and class of supplier was "com.mslv. oms.view.rule.adapter.OsmWebServiceAdapter "which is not found in the project, so I guess it should already be part of the file oms.ear.
  
  If anyone could tell me where to find the class that implements the data provider, I would be grateful if you could help me, because I have concerns on how to implement the method that I outlined in the javadocs and make the call to a web service.
  
  Thanks in advance.
  
  AndresG.

  Hi Andres;

  In your example, the $reuso contains the response to the web service operation, you call. $reuso will be the element to response document root (for example, the item: soap envelope). Yes, $reuso / soap: Body will be the body, etc. Note that you declare all your namespaces in xquery, you need to reference to navigate in your response to your element of document. Note that the element don't have a namespace, so this will make it a little more difficult navigation - better if possible to ensure that this item also has a name space as well.

  As for the source of your error, I suspect it's because you're trying to put all the contents of the soap envelope: in the ReusoInfraestructura element. Unless ReusoInfraestructura is a type of OSM XML component, OSM validation will fail because it does not meet the requirements of this type (only XML elements may themselves contain elements). Is there more information in the about the error stack trace?

  Brian.

• How can I fnd my claim code and the reprint of the web services information sheet

  Hi, I have a HP Deskjet 3520 and try to put in place the eprint.  I read the suggestions on the forum and the FAQ but I can't locate the web services information sheet I need to reprint for claim code.

  Could not find anything under Printer Control Panel either. Please advise!

  Thank you!!

  Hi Chris88,

  Welcome to the HP Support forums.  I appreciate that you try to configure the ePrint on your Deskjet 3520 printer feature.

  If you have the inkjet printer Deskjet 3520 with a C8994 product number this printer does not have the ePrint service.  The Deskjet 3520 printer only has USB connection and ePrint to function the printer must have an independent internet connection through a wireless or a wired ethernet network.  I've included the specifications of the printer for your reference.

  If you have the e-all-in-one printer Deskjet 3520 then we obtain the claim code.  You can request the information sheet of web services from the front panel of the printer, and there the claim code printed in blue. Instructions on how to get it can be found in the section titled "to print a document using ePrint' in your on page 15 user's guide.  Please follow the instructions in step 1.

  HP Deskjet 3520 inkjet printer specifications

  User's Guide e-All-in-One Series HP Deskjet 3520