How to change IP address of the web service proxy.

Similar Questions

• How a value is to consider the change of dblink to the web service?

  Implementation of SOA and OSB, how a value is to consider the change of dblink to the web service?
  
  Where I work, there are a large number of dblink between databases. Some dblinks are intended to be the way to load the immense amount of data while others exist only to simple queries.
  I wonder if it might be better to use web services as dblink. In principle, I think that simple queries may be suitable as a web service to improve reuse and governance but I find web service not apropriated for loads of data.
  Obviously, the decision is more complex that just think tecnology. Despite this, it will be useful to hear if there are people around the world think about change dblinks to web services the same load so heavy querys with a small amount of data to be trafficked and this as the principles, models or reasons behind this decision.
  Basically, we are implementing SOA and OSB and I'm looking for the best I can to rethink the way we used to do it so far. I heard from a friend of mine that we must avoid using dblinks and use only the web services. This seems strange to me because I wonder what level of overloading by the net, that we will face. Could someone give your personal opinion or propose an article? There are some pros and cons, formerly on this review?

  966355 wrote:
  My question is: wouldn't I tend to turn the worst of communication when I change the dblink in scenario 1 and even more terribly worse in scenario 2?

  Yes, this is a drawback... You can't get better performance by adding more load, unless you bring better infrastructure...

  One more detail: in scenario 1, there is a high probability to be reused by other systems.

  It is one of the beneficial results you have to weight against your disadvantages...

  In scenario 2, it is not reused, but we need to audit and traceability of the integrations like this.

  This scenario looks more like ETL integration... It's a bulk data loading, you can take a look at ODI - Oracle Data Integrator (ODI is also part of the Fusion Middleware)

  In my view, the main issue is to have systems so closely coupled... Systems get older, they get out of support, seller will declare a version is end-of-life, then you need to update. The system vendor has don't might not mind system B accesses its internal tables, but if they decide to change the internal database on the next version, they do... And then you're stuck with the vendor and version...

  I hope this helps...

  See you soon,.
  Vlad

• Unable to connect to the Web Services Proxy/unused (a HP 7500 JO)

  Hello

  Here's the situation:

  Previous installer:

  .  I have connected my 7500 for the corporate network (IP = 172... series)

  .  registered the product with ePrintCenter

  .  used a PC under Windows to print (and scan) with the printer

  .  web proxy entry "webproxy.phila.gov".

  .  However, because homeland security rules, I could never work, so I just let it go

  Current situation

  .  has taken the home printer and set up on my home network, i.e.,.

  -using the 192.168.xx.xx series

  -Router broadband Netgear ' G' (1 years) set up at the 192.168.xx.254

  -SSID & encryption assigned

  -printer, the value 192.168.xx.155 (static IP address, the subnet and the gateway assigned as well)

  -My DNS is identical to the bridge and it works fine for all the internet access to this day

  -with the help of a PC and a Macbook Air to print and scan and everything works fine

  .  HOWEVER,.

  -Initially, 'web services' were active (carried over from when I was on the company neetwork?)

  ..  Are looking for, found and downloaded updates

  -When I went to hp.com ePrintCenter he showed the product as 'registered '.

  ..  He would'nt I would like to connect (with a name and a password I had used previously), or create a new account

  ..  I never remember getting an email address of the printer

  ..  and I had never been able to send anything to the printer to print because of my problem of network security

  -Yes, after trying all sorts of things, I:

  ..  I tried to get another email without success

  ..  tried to re - enable web services, but he said I need to 'proxy', and I discovered that he had always "webproxy.phila.gov."

  ..  I have reset the values by default web services and network values

  ..  I put the static IP address return address in (i.e., printer, subnet and gateway (it has nowhere to put in a DNS one))

  ..  printing and scanning to 192.168.xx.155 works fine

  ..  From my iPad AirPrint works very well

  .  BUT, I still can not online and therefore web server, web services are not enabled, therefore not ePrint

  -everytime I try, it says it needs a proxy

  - but I don't have a proxy installed on my internal home network bit

  -Comcast/Xfinity, my ISP, do not use a proxy

  So, I'm dead in the water.  I can't figure out how to get the web services enabled; I do not use a proxy, so I don't know how to go beyond this issue. How to regenerate address of the printer; and so, how do I connect an account on the ePrintCenter (or get them to send me my old account information).  I'm dead in the water and cannot use a feature most of my printer that I desperately want to be put in place and functional.

  Any help would be greatly appreciated!

  Tommy

  Problem solved, but I don't know exactly how I did it. However, I went back in and let the printer assign the IP address. Then I turned the printer off and on again. Last I kept pressing the button "Printer e-mail address", who has repeatedly failed, but then finally went through and print the 'printer' page, I quickly used to connect to the ePrintCenter and put everything in place.
  
  Now it's working.

• Cannot create the web service proxy in jdeveloper

  Hi all
  
  I'm unable to create a proxy web service by using the URL of the web service (https://domains.live.com/service/managedomain2.asmx?wsdl). I get an error saying "no WSDL not could be found. I am able to open the same URL in the browser. As the web service is secured by SSL, do I need to add anything on the jdeveloper to access this web service? Help, please
  
  
  Note: The web service must be called on https
  
  -MJ

  Hello

  The parameters are the proxy settings that are necessary for JDeveloper to connect to external sites - other than those available in the internal intranet.
  To connect to internet/external sites, you must have for this parameter. Here, as you try to connect to the external site - Windows live, you will need these settings.

  Thank you
  Nini

• Reading to the client the IP address in the web service RESTfull

  It is possible to read the address IP of the client accesses a RESTfull built in BT webservice? For example, you might want to identify users of local IP addresses and different information.

  InfiniteNothing,

  Allright, I think I found something.

  Among the Web Wervices screws, there is a VI called Variable read request. One of the variables you can read is a remote address, and I think this will give you the IP address. To use these screws, you will need to use the broadcast method get data instead of reading terminals (as in the example).

  I hope this helps!

• Pots to deploy a standalone JAR of the Web Service Proxy?

  I followed the link as a guide to invoke PurchaseOrderService Version 2 - as a Web Proxy in JDeveloper below.

  Calling an Oracle Forms 11g Web service

  When I run the main method inside of JDeveloper, it works as expected.

  When I deploy and call the Web Proxy, it throws an error:

  java.lang.Exception: java.lang.NoClassDefFoundError: weblogic/wsee/jws/jaxws/owsm/SecurityPolicyFeature
  
  

  He has a problem with other Classes as well.

  1. when the downloaded WSDL document classes Java for JDeveloper, one / some of the Classes use SecurityPolicyFeature and other Classes who report an error. Because these classes are necessary, they do not appear when I deploy my project as a JAR in JDeveloper?

  2. why it works using JDeveloper inside, but not outside of JDeveloper?

  3. I'm the JDeveloper Web Proxy as a JAR project deployment. How can I solve the NoClassDefFoundError deploy?

  Thank you for your support. I almost have it!

  Arie

  Sorry JCS (Service of Cloud Java) the platform target for my test, not related to your case. So in order for your case work 2 libraries must be available on the target system. I'm not familiar with the forms so not sure what is involved in packaging and deployment. Looking at the link you provided it looks like a simple to add to the classpath variable jar file. So I think you have 2 choices; the dependent jar files must be included explicitly in the classpath or the jar file you create must include the. I think that the first would be easier; This is the step where you setup the CLASSPATH for forms add the dependent libraries also.

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• Cannot find the data control to the Web Service in the Menu

  Hello
  
  I try to call a web service in the ADF. To do this, I want to create a web service data command
  
  If I understand correctly, if I right click on the template project, I see the data control from the Web Service under layer Business > Web Services. (as indicated in 2.1 Sec-http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html#WsProxyPojoControl)
  
  However, I am not able to find this entry in there.
  
  I tried the following things:
  
  I tried with Jdev 10.1.3.5, 10.1.3.4 and 10.1.3.1
  I tried to select all available models of technology to create applications
  -Any model
  -Web Application [JSF, EJB, Toplink]
  -Web Application [JSF, ADF]
  -Web Application [JSF, EJB
  -Web Application [JSF, Struts, ADF]... .and everthing else...
  
  I still don't see the web service proxy.
  
  Then I opened the ADFToystore sample application, and I could see the service data Web controls here!... .that mean my jdev is not defective... something else is missing.
  
  So, I tried to see what libraries are selected... I saw that a library named 'Web Service Data Control' are there in the project, which is not there in the model applications project that I created. So I added this library to the project, but it still does not work...
  Next, I added all THE libraries I have seen in the libraries in the project properties section... still no luck
  
  I don't know I'm missing something basic. Can someone please help.
  
  Rgds,
  Amit

  Hi Amit,

  try to set the filter above in New Gallery to filter by: all Technologies

  Kind regards

  Branislav

• Project Web Service Proxy shaded in App with all Technologies

  I created a new application "without model [all techniques]" in Jdev 10.1.3.5.0.4306. I want to create a web service proxy, but there are many choices in gray, including the web service proxy. The only selection available under the Business-> Web Services layer is the connection of the UDDI registry. Any ideas on what I should do?
  
  I just downloaded JDev 10.1.3.5 on Oracle and I get the same question.
  
  Thank you
  
  Published by: 878316 on April 2, 2012 18:03

  Hello

  On your project properties (double-click on the name of the project) going to scope of the technology, if you are 11.1.1.6.0 or features if you are 11.1.2.x, then select web services, click ok and now when you go again that all your Web services options must be activate.

  -Juan C.

• I have updated and now when I try to log on to Web sites with fingerprint reader, I get "Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program."

  I have updated and now when I try to log on to Web sites with fingerprint reader, I get "Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program."

  What is the Digital Persona fingerprint scanner? If it's that they have abandoned, for more details, see https://support.mozilla.com/en-US/questions/799388

• How to get the IP address of the calling client to the web service built in Jdeveloper 11.1.1.7 application?

  I built an application of web service in Jdeveloper 11.1.1.7 to be used by other clients. Just the General steps as follows (Server web service Application is generated--> deployed on the server-> used by clients with the location of the WSDL file).

  Now, I met a requirement where I need to get the port number and IP address for the client.

  Questions :

  How to get the IP address of the calling client to the web service application generated in Jdeveloper?

  Commune technologies used to build web service applications is AXIS or CXF. What Jdeveloper technology use to built web service application?

  The common technologies used to build web service applications is AXIS or CXF. What Jdeveloper technology allows built web service application?

  It depends on the option selected during the creation of web services (if I remember correctly, there are several options, style J2EE 1.4 RPC style JavaEE JAX - WS 1.5,...)

  For example, to get the ip address of the compatible with jax - ws web service, you need to inject the context in your service class with:

  @Resource
  WebServiceContext wsContext;
  

  and then inside your method:

  MessageContext mc = wsContext.getMessageContext();
  HttpServletRequest req = (HttpServletRequest)mc.get(MessageContext.SERVLET_REQUEST);
  String ip = req.getRemoteAddr();
  

  Dario

• When I try to open my address book (collected), it shows only persomal addressbook, which is empty, how to change collected address book?

  I need to access my "collected addresses", but when I open the address book, it shows my "Personalbook', which is 'empty.
  How to change my "address book collected?

  You have the directory pane displayed in the address book window?
  If it is in the menu bar in the address book window, select pane display-in page-directory

  No menu bar? Press the ALT key.

• How to create a link on the web to use in an e-mail?

  I don't know how to create a link on the web that I can put in the e-mail addresses. Could you help me please? I know it must be very simple, because thousands of others do regularly. Thank you.

  Katy Anderson

  You can use file-> Send link or copy the web address of the address bar and paste it into an email.

  You are using an older version of Firefox (3.0.7) - you need to update as soon as possible

• change the frequency for the web service

  I'm under LabVIEW Web Service with an application following the method shown in the example of weather monitor. But my problem here is that I have to keep clicking the Refresh button, then the Web Service can only update the latest data for me. Can someone help me to set an example on how to let the page Web of the Web Service automatically update the value without pressing the Refresh button. Thank you

  First of all your customer needs to support it. If you use the HTTP Client in LabVIEW (GET.vi and so on) you cannot use this method. A normal browser should.

  Take a look at the address book example FindContacts.vi.

  The help topic linked in the previous post, you should get on the way as well. The news are scattered throughout the help file, but it should be possible to understand.

  Basically, there are two output options for a web service VI: Terminal mode as used in the example weather and fashion such Stream used in the example address book VI.

  Use stream mode and build the HTML page yourself, then sends it to the browser with Response.vi write. Somewhere in the top of the HTML page, you need to insert

  If you need to return a string like

  
  
  
  
  
  If your browser supports Refresh,
  this page refreshes in 5 seconds.
  
  And add some real contents here
  

  See also W3C .

  Good luck

• Can not see address of the Web site, FF29.0

  I tried to customize my toolbar when I noticed that I had managed to remove details of the address of the Web site, I can see it is no longer. What do I need to reinstall?

  It is normally not possible to remove the bar of address exactly because of this kind of situation. It was only possible to remove it because you have the add-on installed restaurateur theme Classic.

  1. Right-click on a zone empty of the tab bar and select Customize.
  2. Click the defaults button.

• I try to get Firefox to open Vuze when I click on a magnet link, I get the following message: Firefox doesn't know how to open this address, because the Protocol (loving) is not associated with any program. tell me the solution

  When I try to open a torrent using magnet, I get the following message. Firefox doesn't know how to open this address because the Protocol (loving) is not binding to any program.

  I had this problem and just reinstalled Firefox. Problem solved. In my case, I believe that it is through the installation of FlashGet. Although I uninstalled FlashGet, it had outstripped the Magnet links / Protocol. I hope this helps you with your instance. Fortunately, I had Setup for my version of Firefox (7.0.1) registered and used that but you might need to search for your current version or install a later version