PowerShell script to count the number of VM / file

Similar Questions

• Count the number of transport returns in a multiline text box

  Hello

  I have a script to count the number of feedback from cart at the end of each line of text in a multiline text box.

  After you run the script in the console, the result keeps showing 0.

  Please can someone tell how the script can be revised to count the number of carriage returns?

  var number = 0;
  for (var i = 0;  I < this.getField; i ++)
  {
  var f = this.getField ("ActionAgenda");
  If (f.value == '\u000d') count ++
  }
  Console.println ("there is a total of" + count + "of carriage returns.");

  Any help will be most appreciated.

  Try this:

  var number = 0;

  var s = getField("ActionAgenda").valueAsString;

  for (var i = 0; i)< s.length;="" i++)="">
  If (s [i] = '\r') count += 1;
  }

  Console.println ("there is a total of" + count + "of carriage returns.");

• Scripting: Count the number of selected pixels (non-quadrangle) or alternative approach

  Is it possible to count the number of pixels in a selection that is not a quadrilateral? For example, if I have cntl - click on the thumbnail of a text layer, I would like to know how many pixels is selected.

  This application, if anyone has another approach to try...

  

  My goal is the place the text at some point where it covers do not all lines (or, Alternatively, the place where it covers the smallest number of pixels line). My approach is to insert a text in red to the desired location, apply a BlendMode.Multiply to the text. The number of Red pixels always on the screen will show how many pixels line I'm concealing. Then I move the text into a region and check the histogram in 76 index (which is 255,0,0), find the point with the highest number of red (meaning concealing pixels less line) and finally move the text at that location. See the code snippet below:

  var bestCX = cX;

  var bestCY = cY;

  var bestPixelDensity = - 1;

  var pixelDensity = 0;

  var searchRegionWidth = 3000;

  var searchRegionHeight = 2000;

  loop through an area 3000 x 2000 around where you want

  for (var x = cX - searchRegionWidth/2; x < cX + searchRegionWidth/2; x ++)

  {

  for (var y = cY - searchRegionHeight/2; y < cY + (searchRegionHeight/2); y ++)

  {

  textItemRef.position = new Array (x, y);

  pixelDensity = myDocument.histogram [76]; index of 255,0,0 (red)

  If this point is greater than the previous highest density, use it instead.

  if(pixelDensity > bestPixelDensity)

  {

  bestCX = x;

  bestCY = y;

  bestPixelDensity = pixelDensity;

  }

  }

  }

  move text in the best location found

  textItemRef.position = new Array (bestCX, bestCY);

  The problem is that the images I use are very large ((7000x7000px) for each histogram control takes a few seconds and I really need to move in a fairly large region (3000 x 2000) to find the best place.) I think that it is perhaps faster if I'm not using the histogram at all, and instead each time that I move the text, I select the text and see how many points is in the selection. Any help or alternative approaches would be great!

  I don't know the answer, the only thing I can think is the whole of the histogram to the selection and treatment of the histogram of the selected area.

• Basic conditional script based on the number of lines in a text layer?

  Just received help here to write a conditional script by using the font size of a text layer. Thank you all for this.

  The next hurdle is a conditional script using the number of lines in a text layer in the differential. Far as I can tell it not the layer details which specify the number of lines. Just '\r' for a return in the idTxt descriptor. Nothing seems to stand for a soft return as far as I can tell. I'll probably have to be able to count the lines with soft and hard returns.

  Any thoughts?

  I was playing around with this a bit and here is a small script to determine the number of rows. This is based on the self in the head, that I calculated to environ.108 times the size of the font.

  #target photoshop
  app.preferences.rulerUnits = Units.POINTS;
  var doc = activeDocument
  var tL = doc.activeLayer
  var h = tL.bounds[3]-tL.bounds[1]
  var per = ((h/5)-(tL.textItem.size))/tL.textItem.size
  var num = h/(tL.textItem.size *1.108)
  
  alert(Math.round( num))
  

• count the number of targets, devices and paths by hba for each host with powercli 5.5

  Hi all

  I'm writing this Question again in the community, was not able to found the answer I was looking for in the nets:

  https://communities.VMware.com/thread/516226?start=0 & tstart = 0

  https://communities.VMware.com/thread/293531

  I went through the scripts provided in the community, but seems that t not work on powercli 5.5.

  ///

  # The target account, devices and paths for each host

  Get-Cluster $cluster | Get-VMHost | Sort-Object-property name. {ForEach-Object

  $VMHost = $_

  $VMHost | Get-VMHostHba-type FibreChannel | Sort-Object-property device | {ForEach-Object

  $VMHostHba = $_

  $ScsiLun = $VMHostHba | Get-ScsiLun

  If {($ScsiLun)

  $ScsiLunPath = $ScsiLun | Get-ScsiLunPath | `

  Where-Object {$_.} Name - like "$($VMHostHba.Device) *"} ".

  $Targets = ($ScsiLunPath |) »

  Group-object - property SanID | Measure - Object). County

  $Devices = ($ScsiLun |) Measure - Object). County

  $Paths = ($ScsiLunPath |) Measure - Object). County

  }

  Else {}

  $Targets = 0

  $Devices = 0

  $Paths = 0

  }

  $Report = "" | Select-Object - property VMHost, HBA, target devices, paths

  $Report.VMHost = $VMHost.Name

  $Report.HBA = $VMHostHba.Device

  $Report.Targets = $Targets

  $Report.Devices = $Devices

  $Report.Paths = $Paths

  $Report

  }

  }

  ///

  I went through the script LucD posted below: but it's not exactly what I'm looking for.

  LucD : can you please change the same for me please.   to count the number of paths per hba for each host with powercli 5.5, devices and targets.

  //

  $esx = get-VMHost < host name >

  foreach ($hba to (VMHostHba Get - VMHost $esx - type "FibreChannel")) {}

  $target = ((get - see $hba. VMhost). Config.StorageDevice.ScsiTopology.Adapter | where {$_.} Adapter - eq $hba. Key}). Goal

  $luns = get-ScsiLun - Hba $hba - LunType 'disk '.

  $nrPaths = ($target | % {$_.}) Lun.Count} | Measure - Object - sum). Sum

  Write-Host $hba. Device ' target: ' $target. County "devices:" $luns. County ' path: ' $nrPaths

  }

  //

  I'll be grateful for any help.

  Tarun Gupta

  Try something like this

  {foreach ($esx in Get-VMHost)

  foreach ($hba to (VMHostHba Get - VMHost $esx - type "FibreChannel")) {}

  $target = ((get - see $hba. VMhost). Config.StorageDevice.ScsiTopology.Adapter | where {$_.} Adapter - eq $hba. Key}). Goal

  $luns = get-ScsiLun - Hba $hba - LunType "disk" - ErrorAction SilentlyContinue

  $nrPaths = ($target | % {$_.}) Lun.Count} | Measure - Object - sum). Sum

  $props [ordered] = @ {}

  VMHost = $esx.name

  HBA = $hba. Name

  Target = $target. County

  Device = $luns. County

  Path = $nrPaths

  }

  New-object PSObject-property $props

  }

  }

• Trying to count the number of network adapters on the virtual machines

  Hi all

  Have tried to create a script to simply count the number of network adapters in a virtual machine? In all honesty, don't have a clue where to start? I don't know there are a number of 'ownership' but can't seem to figure out how I can integrate this counting cards network

  Thank you very MUCH in advance

  Munster

  Try this way

  $vms = Get-VM
  
  foreach ($vm in $vms)
  {
       $vm | Select @{N = "VMName"; E = {$vm.name} },
            @{N = "VMNICCount"; E = {$vm.Networkadapters.count} }
  }
  

  Inside of the foreach loop, you select in each $vm name and County NIC.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Script to determine the number of lines of text in a paragraph?

  I'm revisiting a problem I posted here last summer, thanks to all those who have offered help, but I could not sort it out.

  http://forums.Adobe.com/thread/455526?TSTART=0

  What I'm after is a 'search' function to insert in a FindChangeByList.

  Jongware suggested the following - but when inserted in my list, I can't seem to do anything - it does not take a Javascript error.

  app.findTextPreferences = NothingEnum.nothing;
  app.findTextPreferences.appliedParagraphStyle = "Callout_3";
   foundItems = app.activeDocument.findText();
  for (var i=foundItems.length-1; i>=0; i--)
  {
    if (foundItems[i].paragraphs[0].lines == 2)
      foundItems[i].paragraphs[0].appliedParagraphStyle = "Callout_2";
    if (foundItems[i].paragraphs[0].lines == 1)
      foundItems[i].paragraphs[0].appliedParagraphStyle = "Callout_1";
  }
  

  I regularly get a 'word' document on which I run a "FindChangeByList" that cleans and formats the text with a number of GREP/text searches.

  One of the lines of research converts a particluar to the text string to a paragraph style "Callout_3" (the most common legends).

  This style applies to paragraph NET, above and below the line, to create a block/strip of color that says text is reveresed.

  The problem I have, is that the style (due to the rules of paragraph), works well if the paragraph has x 3 lines of text.

  I have updated styles in place for any eventuality - Callout_1 (for the single line of text), Callout_2 (for x 2 lines of text) etc.

  I'm looking for is a script that can count the number of lines in the paragraph (once the "Callout_3" style has been applied) and then change the style accordingly the number of lines in each paragraph/legend.

  Any other thoughts?

  Steve

  -your script can be incorporated into a FindChangeByList .txt file?

  No, he needs to access real paragraph finds it to count the number of line of this paragraph. FindChangeByList Find/change regular strings together, and you can not search for a certain number of lines.

  -what it takes to go to the 'findStyle ('Callout_1');"reference within a"group of paragraph style"called"legends "?

  ... Nothing. Because the style can be within a group, I wrote this little function. The findStyle performs a loop on * all * paragraph styles in the document, the root and in each group and returns the first style with the name that you provide in the function call (tested!).

  So if there is a 'Callout_1' style anywhere, it should find it... Are you sure you put the name at the top of the script? I've seen in a post later that it is actually called "Callout_1line".

• How to count the number of conditionally highlight cells in a column or row

  I'm working on a table to identify problems with my credit rating. So, I have a column that indicates the due date on the invoice and G that contains the date to which I made the payment.

  I'm trying to follow how many times I'm late with payments. I want to improve.

  So if the G column is later than column D, both with the Date formatting. So, now I've highlighted cells and I want to summarize for the year, how many times I was late payments.

  I thought a column G to count the number of days before or after that back I was with payments. But if the sum, it only gives me no useful information. I guess I could count the number of cells with values less than 0.

  I prefer to be able to put in the summary column for G something that said 0-12 years ago has highlighted cells in the column.

  Thank you

  You can not count based on sharing or formatting.  You can, however, be based on the same conditions.

  There are functions:

  COUNTIF() counties based on a condition is true

  and

  COUNTIFS() based on several conditions being true

  = NB. If

  Here is a way.  IT will take an additional column that calculates the "delay" in the days of a payment

  

  the first two lines are the lines of header

  H3 = IF (COUNTA (D3, G3) > 1, MAX ((G3−D3) DUR2DAYS, 0), "")

  It's shorthand dethrone select cell H3, and type (or copy and paste it here) the formula:

  = IF (COUNTA (D3, G3) > 1, MAX ((G3−D3) DUR2DAYS, 0), "")

  Now select cell H3, copy

  Select the H3 cells at the end of column H, dough

  H1 = "payments late =" & COUNTIF(H,">0")

• Count the number of zero terms between non zero terms

  Hello.  I have a table of data of zero and nonzero (example: {1 2 56 2 3 0 0 0 0 0 2 3 5 2 3 5 2 0 0 0 0 32 43}) I need to count the number of zeros of each string of zeros and mark that number against the first zero no term following the string of zeros (NOTE (: string is used here as a description of a series of zeros, not a string variable).  So the plot which coordinates since my example would be (5.2) and (4.32).

  I'm clear on the way to the path, but I am unable to store only each final count of consecutive zeros without having unnecessary data in my plot.

  Thanks in advance to all those who have advice!

  -Mike

  Do something like that?

  EDIT: Minor Correction because of the additional function of decrement.

• How to count the number of edges using counters SMU-6363

  Hello

  I'm counting the number of edges in a test signal in a duration of 50 Ms I use the SMU-6363 map and connect to the TRC test signals 0 SRC (PFI 8). Is that a correct connection? What else do I need hardware wise be a correct set for this application?

  Thank you

  Jeet

  Hi Jeet,

  This configuration is correct. Hardware wise, that's all you need to do.

  Kind regards

  Jorge Fernandez
  Technical sales engineer
  National Instruments
  ____________________________________________
  Certified LabVIEW Associate Developer (CLAD)

• SE I can count the number of lines of UN chain?

  Hello that tal me preguntaba if hay alguna funcion that can count the number of lines that has string of United Nations, for example digamos than esto tengo:

  Hola

  Como

  estas

  Ok

  Son 4 lines, pero hay una funcion as arroje ese resultado? o tengo than generarlo? alguna idea?

  Saludos, buen dia.

  How to dice "Rube Goldberg" en Español?

  

• Count the number of 1 is present in digital waveforms obtained by converting the pulse signals.

  Hello

  I use Analogtodigital.Vi to convert the pulse of the sequences in digital.signals.I am able to get the representation of digital waveforms of impulses.

  But how to count the number of 1 is present in the converted digital waveform. I want to count the number of 1 is present in the digital waveform converted.

  Thanks in advance.

  Have you tried the block scheme of similar to the Digital.vi of opening?

  It creates an array 2D uncompressed 1 and 0, which is the binary 16 bits A/D conversion of each element in the array Y of the input waveform. You can use the DWDT digital Array.vi Boolean to convert a 2D Boolean table. Then convert Boolean values to 1.0 and summarize the array of integers. The sum must be the number of 1 bits in the digital waveforms.

  Lynn

  Note: The VI attached is saved in version 8.6. When I have it saved for the previous Version a warning was generated about the possible differences in the versions. Let me know if it doesn't work, and you are using which version of LV.

• count the number of repetitions of items

  I want to count the number of repetitions in column 2, which correspond to each of the categories in column 1 in table. Rehearsals in col 2 should be the same issue, so I would get the representatives by category and item.
  Can someone help me please?
  Thanks in advance.

  
  

• How to count the number of AAA clients

  Hello

  As we know, ACS5.2 is necessary with a basic license - 500 devices support network.

  Sometimes, there are a lot of AAA clients or network devices that are authenticate simultaneous. So my question is, how to count network devices allowed to auth on ACS5.2? This only includes network, including network devices, or the AAA clients or devices?

  Rgds,

  Laowu5017

  Hello

  ACS 5.x counts the number of AAA clients that are configured on the ACS.

  Please note that clients and network devices of AAA is the same and they conform, switches, routers, WLCs, or any other device configured under

  Network resources >

  ... >

  Network devices and the AAA Clients

  The AAA Clients aren't the AAA suplicants.

  End-user PCs customers are the AAA suplicants, and for this, there is no limit to number.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• How to count the number of updates in a loop Forall

  Hi friends

  I want to know is - it possible to count the number of updates occurred in FORALL. I share the codes below. His only return the iteration number. If I spend 5 through the values of the PARAMETERS and 2 updates the values in the table then return 5 instead of 2.  My requirement is to count the number of updates have taken place and return this value to OUTPUT parameter. If possible, please share codes. Thank you very much...

  CREATE OR REPLACE PROCEDURE UPDATE_PROCESS_RATE 
            (
             V_HOSPITAL_ID IN HOSPITAL_SERVICE_MASTER.HOSPITAL_ID%TYPE,
             V_USER IN VARCHAR2,
             V_DATE IN DATE,
             V_PROCESS_ID  IN VARR_ARRAY,
             V_PROCESS_RATE IN NUM_ARRAY,
             V_NUM OUT NUMBER
             )
  
  
              IS
  
                  V_ERROR_CODE NUMBER(15);
                  V_ERROR_MSG VARCHAR2(200);
                  V_ARRAY_ID NUMBER(10,2);
                  V_TOTAL NUMBER:=0;                                            
     BEGIN
                SAVEPOINT Sp1;
           BEGIN
     
                 FORALL i IN V_PROCESS_RATE.FIRST..V_PROCESS_RATE.LAST
               
                             UPDATE HOSPITAL_SUBSERVICE_PROCESS M 
                             SET M.PROCESS_CHARGE=V_PROCESS_RATE(i)
                             WHERE M.HOSPITAL_ID=V_HOSPITAL_ID
                             AND M.HOSPITAL_PROCESS_ID =V_PROCESS_ID(i);
                                                      
                 FOR i IN V_PROCESS_RATE.FIRST..V_PROCESS_RATE.LAST LOOP
              
                     V_TOTAL:=V_TOTAL + SQL%BULK_ROWCOUNT(i);
                 End loop;
             
                     COMMIT;  
                     V_NUM:=V_TOTAL;           
  
  
  
  
  

  IndiMinds wrote:

  But my requirement is: it must count the update only when it detects a different value from array. When it detects a different value in the table must be updated and count it and if the update of the table value is similar the TI should not count it.

  For example, if the V_PROCESS_RATE table have these 3 values (10,20,30) and we need to update these 3 values with (10,40,50), so no update, it should return is 2 not 3.

  Thank you

  And then don't update these lines, change your update statement

  UPDATE HOSPITAL_SUBSERVICE_PROCESS M
  SET M.PROCESS_CHARGE=V_PROCESS_RATE(i)
  WHERE M.HOSPITAL_ID=V_HOSPITAL_ID
  AND M.HOSPITAL_PROCESS_ID =V_PROCESS_ID(i)
  AND DECODE(M.PROCESS_CHARGE,V_PROCESS_RATE(i),0,1) = 1;