Preset for MPEG2 editing?

Hi all

I have a bunch of .m2t 1920x1080i MPEG2 files I would like to change with PE7.  I'm a bit confused about what preset should I choose when you create a new project.  Any advice would be great.

Thank you

John

You choose the NTSC/PAL HDV 1080i 30/25 deopendant project on your area... NTSC or PAL.

Tags: Premiere

Similar Questions

  • Best Preset for CS5 to AVCHD

    I'm experimenting with one of the latest AVCHD Vixia of Canon cameras that is capable of shooting video 1920 X 1080 at 24 MB/s.  I think that the MTS files that result are natively captured in 60i format.  I want to do a demo tape for a customer for a product shoot with this camera to show the quality AVCHD and clairty. It seems that if I select 1080 p preset for this codec in CS5, I would be throwing half of the resoluiton vertical if the native video format is 60i, as would be the case when shooting SD video with a native of 29.97 FPS format, which reduces the resolution of natual. My guess is that the 60i is a field rate and not a cadence.

    The preset for 1080 p or 1080i are both set to a ratio of square pixels or 1, as opposed to retangular ou.9, as with NTSC DV.  It would seem with a format of the square pixels when displayed on a screen format screen 16:9 wide, it would produce an incorrect image.

    Could I get some clarication/confirmation on the two issues above?  It would be the first time that I used this format of HD video and I want to be sure that what I produce is both standards and optimized with native video I have for the real demo.

    I probably happen this video to be considered as a mp4 only file rather than he incorporatin in a DVD.

    Thanks indeed in advance for the help.

    The best thing is editing in HD and then export to dvd mpeg2 or use Dynamic Link to make a dvd in Encore.

    1920 x 1080 is always big screen square pixel.

    If creating a dvd of this film the view will be always big screen with non square pixels with a format of 1,2121 pixels (0.9 is for 4:3)

    If its filmded 60i sticks you to 60i.

    See screendump, however this is nec 50i, just choose 60i (two at the bottom)

    If you are unsure what is preset to choose dragging a clip in the project window in a new item icon, this will create a sequence corresponding to your images.

  • Media encoder do not have preset for ProRes 4 k or UHD, has only for Avid

    I want to transcode my original MXF 4 k (actually UHD) of sony x 70 to ProRes for editing PP in 2015, but even the new update has no ProRes 4 k presets.  There are full frame presets of size for DNxHR MXF OP1a (for Avid) but nothing for 4 k ProRes for editing of PP.  Is there a "Preset"? I don't know, you can leave out the originals in PP but hear the originals H264 wrapper isn't good for editing re applications on system. So I want to transcode to proRes but keep the UHD image size. I have been informed that rates vary according to the size of the image and the pace, Adobe should therefore ProRes settings you can download. Someone knows?

    A number of things.  First of all, the presets are just a shortcut to a group of settings that you can use again and again.  You can always make your own if you don't see one that you need.

    Second, try Cineform.  The quality is just as good as ProRes and publishes it smooth as silk.  In addition, there is already a "Preset" for her.

  • Presets for reactive structure

    Hello

    I was doing a tutorial, and when it comes time to use the presets for reactive structure, the guy on the tutorial has 6 presets, and I don't have one...

    edge.jpg

    Does anyone know how can I get these presets?

    Thank you!

    This is because you have a scene > selected symbol.

    The tutorial you reference most likely has an asset of the image selected: who will reveal 6 layout presets.

    So in your case, if your symbol 'houses' an image that you want to apply one of the six presets layout, then you must be in symbol editing Mode: just double click on the symbol to enter Edit in Place. Then select the image, then choose from the preset picker.

    Hope this helps

    Darrell

  • Clips MPG (mpeg2) edited lose Audio - first Elements 8

    I have 2 a mpg files recorded off TV.  When I put them in Elements 8.0 can I read them and the sound is fine.  However, after I edit them to length the sound disappears.  It looks like somehow when the video is changed to remove the audio track of length.  I'm editing in scene mode.  Any help would be appreciated.

    It is possible that you do not give the file time to comply.

    Open a new project in Premiere Elements. Make sure that on the new project screen, you go to settings and select one of the presets for a camcorder to HDD or Flash drive. Then put in one of your MPEGs.

    Watch a progress downstairs bar to the right of the interface. Wait until what it has done in keeping your file before you place it on the timeline. Then see if this makes it possible to edit.

    If this isn't the case, it seems that these files will not work with Premiere Elements. I'm sorry.

  • How to delete presets for effects to a clip?

    I am learning the use of the official document for help from Adobe first Elements 8.

    I currently work in Chapter 10, 'Application of effects', section 'Work with the effect presets'-> 'apply a preset of effects '.

    The help document does not say how to remove a preset effect you had applied.

    I tried to follow the instructions to remove the usual effects, but they don't seem to work in the case of the predefined settings.

    How can I remove presets for effects to a clip?

    Itay,

    Suppose that I have applied several effects preset to a certain clip.

    Now I want to inspect which presets I applied.

    Can I do this? If we were talking about the effects rather than predefined effects, it could be accomplished easily, could not?

    Inspector (or deletion / to hide/change) the effects that have been applied to a particular item can be made easily in the properties panel.

    But I think that what you asked is that the same is possible for the effect presets.

    Well the answer is YES and NO, depending on the preconfiguration of effects that you applied and your understanding of the preset.

    Presets like - "PIP 40% YOUR Spin Out Top.

    Can I go to the properties panel and see any input related to it? Years - no.

    But can I still edit/delete-YES.

    Handly I know what/where to change?  -C' is that your understanding of the preset comes into play. Given that the name of the preset bed scale itimplies «PIP 40%...» ' has been reduced to 40%, HEART involves top-right and high SpinOut involves - values of position and rotation have beenkeyframed (animated). This means that you should just go to the motioneffect and change it.

    Another example - Presets > Contours beveled > bevel thick edges or Presets > color effects > Super dyed Green

    Can I go to the properties panel and see any input related to it? Years - YES, a bevelled edge effect can be seen in Panelfor the first preset properties and a "Tint" effect can be seen in the case of preset rates.

    In short, an entry for preseeding of applied effects explicitly appears in the Properties Panel - No.

    But I can understand and modify a preset of applied effects or is there a way implicit to differentiate the presets applied effects (> 1) - YES.

    Depends on your understanding of the preset.

    Itay, effect presets are a cutting-edge concept, and as become familiar you with Preworkflows, you would become little bit more uncomfortable change.

    See you soon!

  • Add-on for Print Edit does not work

    I just got my iMac cleaned for adware and now my add-on for print edit does not work. There is an error 2 - XPF to the catalog. I don't know the email address of support for developers?

    Hello

    Did you mean this extension:

    The contact details are on the right side of the page, next to the section 'on this add-on.

  • Satellite 1800 Series, upgrade for video editing

    Is it possible use you my Satellite 1800 for video editing. (pinnacle studio 8/9)
    I now 256 MB in use, HD is original and the processor is the processor INTEL celeron-995 MHz.
    And is it possible to replace the DVD on a DVD - RW
    Thank you
    John

    The my Satellite 1800 Series drive is fixed mounted, yours is too (I think). The only way to change the disk is to go to the next dealer Toshiba one ask him if there is a reader, that it might recommend.

  • The new iMac 4 k is ready for video editing?

    I want to buy the new iMac 21.5 ' 4 K for video editing and Im not sure if its Integrated GPU or the rest of the hardware can handle the work. I usually work with 1080 p video, but I've read that its GPU is quite limited. Please I need help.

    You will have no problem using the iMac of the retina for editing 1080 p video. The 27-inch model includes a GPU dedicated with its own memory, however. You decide: http://www.apple.com/imac/specs/

  • where can I find my registration key for Vista Edition basic family

    Where can I find my registration key for Vista Edition basic family

    'Product Key' is probably what you mean.

    You buy it in a store by itself (Windows Vista Home Basic which is) or is it installed on your computer?

    If you bought autonomous - it is the case of DVD that the DVD is in.  If it came pre-installed, it is on a sticker pasted on your machine.

  • Changing the Business Edition for home edition

    Hello

    The hard drive of my laptop sh * t himself.  Subsequently, I have installed a new.  However, I do not have my backup of disks, so I reinstalled Windows Vista by using a copy of the friends of Windows Vista, Enterprise edition.  Thinking that my product key that came with the laptop would be OK to use it. (Laptop comes with Windows Vista Home edition)  Unfortunately, the P/K for Home Edition is not compatible with Vista professional.  Is anyway to replace the Business Edition with Home Edition?  And where is the best place to get a copy of the home edition?  Microsoft will provide a replacement disk?

    How to replace the lack of Microsoft software

    Carey Frisch

  • Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

    The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

    When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

    Additional resources:

    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

  • The upgrade of my desktop pc from HP a1540n for photo editing

    Hi all

    I am currently running Win XP SP2 on desktop HP a1540n; System specs are here:

    http://support.HP.com/us-en/document/c00679533

    After you have maxed out my RAM (4x1Go), the system has worked well for me for about 4 years.  However, I'll buy a new 36 MP digital camera and need to upgrade the operating system to a minimum (for Vista or Windows 7) to take over some of s/w that I use for photo editing. At the same time, I am considering a few hardware upgrades as well to improve the speed of the system (I work with large files).

    I'm looking for options in order to make the system work and, if $ allow to improve performance.  I would like some advice on whether if it is worth upgrading the hardware or just bite the bullet and withdraw from the newer system for somethng.

    Option 1: OS upgrade only, pref for Win 7; cost: ~ $140

    Option 2: upgrade MB (with processor), optionally add a video card. upgrade cost:?

    Option 3: new system; cost: ~ $1000.

    Option 2 makes any sense?  So I hate to waste the old h/w, I'm not sure whether this option is profitable.  Can the remaining material (power supply, etc.) support and are working properly with the motherboard more recent or other improvements will be necessary as well (in addition to the OS)?  I will be attaching multiple drives (some new, some existing); a new MB give me USB3 ability, or is it a separate addon?

    All advice/recommendations would be appreciated...

    -Rob

    Rob, welcome to the forum.

    This is one of the most difficult situations to address.  The upgrade can be a good option if the original components are even more recent.  However, a computer that is 6 years old becomes a dinosaur.  As a result, purchase new may be a much better option.  If you can afford the $1,000, I think you would advance money.

    If your problem is solved, please click "accept as a Solution.

  • "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

    Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    Which edition of Windows 7 is installed on the machine?

    Which edition of Windows 7 you are trying to do an Express upgrade to?

    Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

    ---------------------

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

    I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

    However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
    "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    What should I do?

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

Maybe you are looking for