Presto PageManager 6. Failed to create empty document.

Similar Questions

• Failed to create empty document

  When I try to open any management or the Device Manager I have an error mmc window that says: "cannot create document empty."
  If anyone knows the cause and the fix for this problem?

  Hi Jsa123,

  Quick question, did you check your available space lately? Please take a look at this article

  PRB: MMC: Management Console may not start

  http://support.Microsoft.com/kb/231757

  The Management Console could not create a temporary file in the TEMP directory. This may be due to one of the following:

  ·         The TEMP or TMP environment variable may point to a folder that does not exist.

  ·         There is the drive containing the TEMP directory may be full.

  If the disk is full, clear space.

  If the TEMP environment variable does not exist, or points to a folder that does not exist, follow these steps to set the variable to a valid folder:

  1. click on Start. Point to settings, and then click Control Panel.

  2. double-click on the icon System in Control Panel.

  3. click on the environment of the System Properties dialog box tab.

  4. in the Edit of the Variable field, type TEMP.

  5. in the value edit field, type the name of the folder that will receive temporary files. For example, C:\TEMP (if the TEMP folder exists on drive C).

  6. click on OK.

  Hope that helps, please post back and we do know.

  JohnD
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Build failed if create an InvokeManager

  In the construction of the class, if I again create the InvokeManager, the construction process will be to be failed. It shows only a Red Cross in the project.  There is not any suspicion of error by which I can know what is the problem.

  If I delete the source line ", m_invokeManager (new InvokeManager (this))"in Gateway.cpp, everything is OK. "

  I need to put in place the other libraries in the project or is linked with permission?

  Thank you

  The source code is as below:

  Gateway.HPP

  // Default empty project template
  #ifndef Gateway_HPP_
  #define Gateway_HPP_
  
  #include 
  #include 
  
  namespace bb { namespace cascades { class Application; }}
  
  /*!
   * @brief Application pane object
   *
   *Use this object to create and init app UI, to create context objects, to register the new meta types etc.
   */
  class Gateway : public QObject
  {
      Q_OBJECT
  public:
      //Gateway(bb::cascades::Application *app);
      Gateway(QObject *parent = 0);
      virtual ~Gateway() {}
  private:
      // The central object to manage invocations
      bb::system::InvokeManager* m_invokeManager;
  };
  
  #endif /* Gateway_HPP_ */
  

  Gateway.cpp

  // Default empty project template
  #include "Gateway.hpp"
  
  #include 
  #include 
  #include 
  #include 
  
  using namespace bb::cascades;
  using namespace bb::system;
  
  /*Gateway::Gateway(bb::cascades::Application *app)
  : QObject(app)*/
  Gateway::Gateway(QObject *parent)
      : QObject(parent)
      , m_invokeManager(new InvokeManager(this))
  {
  
      // create scene document from main.qml asset
      // set parent to created document to ensure it exists for the whole application lifetime
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
      if (!qml->hasErrors()) {
  
          // The application NavigationPane is created from QML.
          NavigationPane *navPane = qml->createRootObject();
  
          if (navPane) {
              qml->setContextProperty("_navPane", navPane);
  
              // Set the main scene for the application to the NavigationPane.
              //app->setScene(navPane);
              Application::instance()->setScene(navPane);
          }
      }
  }
  

  The console log

  C:\bbndk\host_10_0_9_404\win32\x86\usr\bin\ntoarm-ld: note: '_ZN2bb6system13InvokeManagerC1EP7QObject' is defined in DSO C:/bbndk/target_10_0_9_1673/qnx6/armle-v7/usr/lib/libbbsystem.so.1 so try adding it to the linker command line
  make[1]: Leaving directory `C:/bbndk/workspace/Gateway/arm'
  C:/bbndk/target_10_0_9_1673/qnx6/armle-v7/usr/lib/libbbsystem.so.1: could not read symbols: Invalid operation
  cc: C:/bbndk/host_10_0_9_404/win32/x86/usr/bin/ntoarm-ld caught signal 1
  make[2]: *** [o.le-v7-g/Gateway] Error 1
  make[1]: *** [debug] Error 2
  make: *** [Device-Debug] Error 2
  

  As the beginning of your state of errors, you must link against libbbsystem.so.1.

  This is done by adding the following line to your .pro Momentics file:

  LIBS += -lbbsystem
  

• Error message: cannot copy... Failed to create the directory or file.

  I get the Error Message ' cannot copy (a file USB Store n Go): failed to create the directory or file.»  All of a sudden I started getting error message is when I tried to copy to the USB mass storage: "F:" copy on the removable key worked for a proor very long in this message. And there are a lot of empty space.  The diagnosis says that everything works correctly.

  Dear Clarence

  Try first to unplug the mass storage device, then reconnect and format it by Righ click on Format.

  Then try to paste these files on this USB key again.

  If it fails this time then format your USB using HP USB stick formatting to http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=MTX-UNITY-I23839 tool

  Click Download on the page above. Install it and run it. This will guide you through the steps of formatting your USB drive in a few seconds...

  It is also useful for the repair of the almost dead usb keys.

  Concerning

  Zeeshan Ahmad

• Failed to create a 3D text (or 3D nothing else) all options in the 3D Panel are grayed out. With the help of CC 2015.1.2 on Mac Pro

  Failed to create a 3D text (or 3D nothing else) all options in the 3D Panel are grayed out. With the help of CC 2015.1.2 on Mac Pro (end 2013)

  Thanks for the update.

  Go to the Photoshop preferences > 3D > check whether it shows VRAM than 3072 MB

  Look for the system updates and see if there are updates waiting for your graphics card drivers.

  And make sure that the document you are opening is in RGB and CMYK mode not.

• Failed to create a region of taskflow containing fragments of facelets in jspx

  Hello
  
  I use jdeve 11.1.2.3, wheneven, I do drag drop taskflow jspx layout get the following error
  
  Failed to create a region of taskflow containing fragments of facelets in jspx page. But it works with the jsf page.
  
  Please help me on this issue.
  
  I created taskflow I have page fragment, it contains list of table data. Whenever I drag drop in page jspx TF get the above error.
  
  Thank you
  Nitesh

  Hello

  When you create your piece, you have to choose the "Document Type": "Facelets" or "JSP XML". You should try to verify "JSP, XML.

• Create empty Clip in a loop

  I have a table with the names of image in it.  I want to loop through the array and create empty movie clips and load an image in there.  I also want to do this in 3 rows.  At the moment I just have difficulty to get the images to load.  Any help would be appreciated.  Thank you.

  CODE:

  function placeImages() {}

  trace ("Place of Images");

  trace (currentArray);

  startX = 110;

  startY = 86;

  xSpace = 63;

  xSpace = 50;

  line = 1;

  switch (currentArray)

  {

  case 'regArray2 ':

  for (var x = 1; x < regArray2.length + 1; x ++) {}

  trace ("AddChild");

  this.createEmptyMovieClip ("image" + x, 1000);

  This ['image' x] ._x plus 110;

  This ['image' x] ._y plus 86;

  This ["image" + x] ._xscale = 10;

  This ["image" + x] ._yscale = 10;

  This ["Picture" + x] .loadMovie (regArray2 [x]);

  }

  break;

  }

  }

  See the regArray2 if the following fails:

  function placeImages() {}

  trace ("Place of Images");

  trace (currentArray);

  startX = 110;

  startY = 86;

  xSpace = 63;

  xSpace = 50;

  line = 1;

  switch (currentArray)

  {

  case 'regArray2 ':

  for (var x = 0; x)< regarray2.length;="" x++)="">

  trace ("AddChild");

  this.createEmptyMovieClip ("image" + x, this.getNextHighestDepth ());

  This ['image' x] ._x plus x %3 * 200 + 100;

  This ["image" + x] ._y = 200 * Math.floor (x/3) + 100;

  scale after loading is finished

  This ["Picture" + x] .loadMovie (regArray2 [x]);

  }

  break;

  }

  }

• Failed to create the specific message of B2B Protocol

  Hello
  
  I get this error when sending the message-
  
  
  
  Machine Info: (PUNITP84609D)
  Description: Failed to create the specific message of B2B Protocol
  StackTrace:
  Error -: AIP-51503: general create Message error: java.lang.Exception: java.lang.NullPointerException
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2289)
  at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1641)
  at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
  at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1147)
  at oracle.tip.adapter.b2b.data.MsgListener.onMessage (MsgListener.java:833)
  at oracle.tip.adapter.b2b.data.MsgListener.run (MsgListener.java:400)
  at java.lang.Thread.run(Thread.java:534)
  Caused by: java.lang.Exception: java.lang.NullPointerException
  ... 7 more
  Caused by: java.lang.NullPointerException
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.getPrivateKeyFromWallet(EBMSExchangePlugin.java:5967)
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.getPrivateKeyForSigning(EBMSExchangePlugin.java:5322)
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.signAttachment(EBMSExchangePlugin.java:5160)
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2130)
  ... 6 more
  
  
  What could be the source of the error?
  
  Thank you.
  
  Kind regards
  Anuj Dwivedi

  Hello

  There is another method that can help you get things going. 'Orapki' is a utility that is shipped along with the installation of the Oracle Application (path on windows $ORACLE_HOME/bin/orapki.bat) server and you can use the same to generate the wallet and certificate for your test object.

  Here are the steps, first of all, let's create an empty wallet and the second will add a self certificate signed to it.

  1 C:\Oracle10g\midtier2\bin\orapki.bat wallet create - portfolio. Eu1 - pwd
  2. Add C:\Oracle10g\midtier2\bin\orapki.bat wallet - wallet. -1024 key size - dn "CN = sample" - self_signed - pwd eu1 - validity 365

  Note: For some reason the private keys attached to the wallet created using keytool do not appear, or may not be localizable.

  Kind regards
  Sinkar
  [Correction to Ramesh team]

• I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

  I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

  It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.

• I created a document with textedit, and now need to add a password

  I created a document with textedit, and now need to add a password to this document that exists.  Is it possible to do?

  I'm afraid that there is not.

• To create a document by using numbers

  Hello

  I want to create a document in numbers that will be used as a presentation and a document linked - I want to do this rather than create graphs in numbers to save as PDF to then place them in InDesign or Powerpoint.

  I created a spreadsheet that contains charts and other content (explanatory text and diagrams etc.), but it is not clear where the edges of the page will be be.until I go to the print command. I had to draw guides for each page and estimate where the content will go. Doesn't seem to be a point of view that I can use to do this.

  There will be many other leaves of calculation that contains the data tables to link to the main spreadsheet.

  Is it possible to see the document (top view) as if ti where A4 landscape pages?

  Thanks for any ideas

  Kevin

  Numbers, in my opinion, this is terrible at this particular task. I think you have to see how the content will be page in your own question.  You need to move the content to get it placed so it fits on the pages you want.

  If I have to do it for very many passim I would move into Keynote and do all the work he

• Why my mac does not create a document without a title when I print? I must go to my downloads and sending them to the Recycle Bin manually.

  I'm about 10 days during which my office converted from windows to mac. A question is: whenever we print desktop mac OS X from Yosemite to one of the benefits of HP color laser jet MFP M477fnw 2, our mac creates a document without title that it sends to my downloads. I have to then go to my downloads and manually delete these docs (send to the trash).  They are labeled: report.2.pdf, report.3.pdf, report.4.pdf, ect... with every single print job numbers. Is there a way I can stop these files cluttering up my downloads?  Thank you.

  Try the search and post here.

  -Support of Microsoft Office for Mac

  -Support of Microsoft Office for Mac (2)

• Boot Camp install fails: cannot create the partition

  512SSD i7 MacBook Pro late 2013

  Boot Camp Assistant 6.0

  O/S 10.11.2

  true (paid for!) Windows 10 home

  Create USB boot exactly according to the instructions of the Boot Camp Assistant (time consuming)

  Re-partition Mac SSD in Colombia-British Deputy with 60 GB for windows partition

  Restart the system and boot of Windows Setup

  Enter the key to victory, everything works fine

  When you choose which partition to install windows, select 60 GB

  Installer of Win said partition is not formatted correctly, so I use the formatting tool in the installer

  Formatting tool seems to work but removes the volume name: it was Boot Camp and becomes Untitled

  60 GB re partition - select an installer says "failed to create the partition" or something similar

  Installer refuses to go forward and the only way out is to leave the Setup program

  Mac to Mac o/s boots

  Tried a couple of times and always the same result.

  Someone has an idea what I am doing wrong? I'm just following the instructions of the Boot Camp Assistant...

  This is the case, if you have any other than the USB storage and storage internal connected.

• Photosmart HP 6510 using Mac OS x 10.8 - create multipage documents

  I have updated and installed the driver for the 6510 and I can print and scan wireless. I can't create multipage documents. In the past, I used the software "HP photosmart studio" with a previous printer (is more connected) to create multiple pages of scanned documents.  I can't find the printer when I search new devices in the program "Studio".

  How can I create multiple pages of scanned documents?

  Thank you

  Hello

  You can create multi-page scans using the HP scanning application, you can find it under Applications\Hewlett-Packard.

  Full scans by adding the necessary pages, at the end click on save to complete the analytical work.

  If you can't find the HP Scan means that the complete software has not been installed, you can download the software below, be sure to select the Software from HP recommended during installation:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107204-2&cc=us&DLC=en&LC=en&OS=219&product=5058336&sw_lang=

  Shlomi

• failed to create value for the message Analyzer "at line 54.

  I get the following error, can someone please?

  failed to create value for the message Analyzer "at line 54.

  Hi ejpeppjep,

  Check if this article helps you fix the problem: http://support.microsoft.com/kb/823768

  If the problem persists, we recommend that you try the following steps and check the result.
  Step 1: a. Click Start, click Run, type cmd and click ok.
  b. at the command prompt, type sfc/scannow and press ENTER.
  c. once the analysis is complete, restart the computer and check if the problem persists.

  Note: You will be asked to insert the Windows XP disk, if a file is missing.

  For more information, see Description of Windows XP System File Checker (Sfc.exe)

  Step 2: If the problem persists, restore the computer to an earlier time
  see How to restore Windows XP to a previous state .

  Visit our Microsoft answers feedback Forum and let us know what you think.