Principle & interest and interest only check the behavior of box

Similar Questions

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• Volume on the taskbar was hidden without changing the setting.__Try to reset the taskbar of the notification area, but the volume box is gray and unable to check the brandname.

  Volume on the taskbar was hidden without changed the setting.
  Try to reset the taskbar of the notification area, but the volume box is gray and unable to check the brandname.

  Volume on the taskbar was hidden without changed the setting.
  Try to reset the taskbar of the notification area, but the volume box is gray and unable to check the brandname.

  Missing notification icons:
  3 ways to recover...
  (1.) the easy way, if you're lucky:
  Right click on the task bar > click Properties > at the top, click on Notification area > can you put a check mark on the network? If so, you're done.

  If it is unclickable.
  2.) use this tutorial:
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html
  Depending on the version of Vista, you have, use the method two or three.
  One when you're done, return to #1 above and click on the box.

  3.) do a restore ysytem. Choose the date at which the icon was present under your restore point.
  Here is the tutorial:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  t-4-2

• I have published my muse built Business Catalyst site and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  I recently published my muse built the Business Catalyst site for preview and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  Hello Jimw93000314,

  Are you preview site in the edge browser? When you preview the page in the browser Muse create a local server to give you the preview in the browser. With the edge browser, there was a reported issue to access the local server.

  Please click the link below that shows the steps to enable the browser to edge.

  http://StackOverflow.com/questions/30334289/cant-open-localhost-in-Microsoft-edge-project-spartiate-dans-Windows-10-APER cu

  I'm sure this will help.

  Kind regards

  Vivek

• Hi all. How can I manage the preferences that LR do not take up space on my MAC hard drive and works only on the external hard drive?

  Hi all. I am new and on a free trial right now.

  How can I manage the preferences that LR do not take up space on my MAC hard drive and works only on the external hard drive?

  Monthly payment included cloud storage?

  Peut I manage backups? And how?

  
  

  -Amir
  

  Hi amireos,

  Yes, you can create your workflow where you can keep all your images on the external hard drive and the Lightroom catalog file as well.

  If you start with Lightroom and then use the Destination location as external hard drive when you import your image of the external source such as a camera or SD.

  If you already have your Images on the Mac HD drive, then play all your Image on the external hard drive first and then import images directly from there.

  Finally, you can change the location of the Lightroom Catalog as well.

  Default location: folder on the Mac Drive HD, there is folder called Lightroom that you can move on the external drive too (however catalog Lightroom can't memory space as its only import previews of the images is not the real image and full)

  Once you move the file catalog Lightroom external hard disk, then you need to browse the catalog file when you launch Lightroom only once.

  See thread: LR catalog moving on external hard drive

  Let us know if it helps.

  Kind regards

  ~ Mohit

• Query cannot be parsed in the generator. If you believe that your query is syntactically correct, check the generic "columns" box below the source of the region without analysis. ORA-00905: lack of keyword

  Hi all

  I have create report sql in version 4.2, and now we have apex version 5.0 upgrade.

  I encountered error when I change the State of sql

  The error massage:

  Query cannot be parsed in the generator. If you believe that your query is syntactically correct, check the generic "columns" box below the source of the region without analysis. ORA-00905: lack of keyword

  My SQL

  SELECT VW.*

  , CASE WHEN (VW.file_code is null

  OR VW.cancel_flg = 'Y'

  OR (TOUR_DEP_DATE + GET_FILE_LOCKING_DAYS (VW. (SBU_CODE) < = trunc (sysdate))

  ) THEN

  ' < font color = "Red" > < b > other < /b > < / police > '

  ON THE OTHER

  "< a href =" f? p = & APP_ID.:51: & SESSION. : O PR: & DEBUG. : 51:P51_FILE_CODE, P51_COSTING_CODE, P51_TOUR_REG_NO, P51_VERSION_NO, P51_REQUEST, P51_AGENT_NAME, P51_ADULTS, P51_CHILDS, P51_MKT_CODE, P51_QUOT_CURR:'

  || FILE_CODE | «, » || COSTING_CODE | «, » || TOUR_REG_NO | «, » || VERSION_NO | «, » ||' OPR' | «, » || AGENT_CODE | «, » || VW. FROM_PAX | «, » || 0||','|| VW.mkt_code | ',' | VW. QUOT_CURR |': ' > < font color = blue > < b > other < /b > < / police > '. "

  END as "other Actions".

  , CASE WHEN ((VW.file_code is not null AND TOUR_DEP_DATE + GET_FILE_LOCKING_DAYS (VW. (SBU_CODE) < = TRUNC (SYSDATE))

  OR cancel_flg = 'Y '.

  OR (VW. REF_COSTING_CODE = VW. ADDL_FIELD2 AND VW. ADDL_FIELD1 LIKE '% COPIED FROM % OF APPROVAL'

  AND BOOKING_NAME LIKE "%-Backup")

  ) THEN

  ' < font color = "Red" > < b > edit < /b > < / police > '

  ON THE OTHER

  "< a href =" f? p = & APP_ID.:149: & SESSION. : & DEBUG. : 149:P149_COSTING_CODE:'

  || COSTING_CODE |': ' > < font color = blue > < b > edit < /b > < / police > '. "

  END AS 'Edit '.

  , CASE WHEN (Nvl (cancel_flg, 'n') = 'Y')

  )

  THEN

  ' < font color = "Red" > < b > add < /b > < / police > '

  ON THE OTHER

  "< a href =" f? p = & APP_ID.:33: & SESSION. : & DEBUG. : 33:P33_COSTING_CODE, P33_FILE_CODE, P33_MKT_CODE, P33_QUOT_CURR, P33_NO_OF_ADULT, P33_NO_OF_CHILD:'

  || COSTING_CODE | «, » || file_code | «, » || VW.mkt_code | ',' | VW. QUOT_CURR | «, » || VW. FROM_PAX | «, » || 0 | ': "> < font color = blue > < b > add < /b > < / police > '

  END as 'Services '.

  OF TOUR_MAS_VW VW

  How to solve it.

  Thank you

  Dear friends

  Thanks for your helping hands.

  I found the solution for this. We can solve this problem by using these solutions

  • A region of HTML:

    click me
    

  • Using PL/SQL:

    htf.anchor('f?p=100:5:'||V('APP_SESSION'),'click me');
    

  • Using a SQL query: SELECT htf.anchor('f?p=100:5:'||:APP_SESSION,'clickme') FROM DUAL;

  We can write the query in the form

  SELECT ' f? p = 100: 1 :'|| : APP_SESSION |': ' | : APP_UNIQUE_PAGE_ID |

  ': P1_EMPNO :'|| employe_id,

  first name,

  job_id

  Employees

  Thank you & best regards

  CORINE

• After I install my laptop bootcamp has restarted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked the scores he had only a mac partition

  After installing bootcamp my laptop has rebooted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked partitions there was only a mac partition and I can't get back the deleted memory

  Post a screenshot of what shows utility disk to disk

  How to take a screenshot on your Mac - Apple Support

  OSX works OK?

• Impossible to turn off read-only - and I already checked the Security tab

  Hello, I use Vista Ultimate.  I'm on my home computer and have full administrative rights.  Have a big problem trying to get the recovery off the power on a personal folder read-only.  It is NOT a folder on a network or is a system folder.  When I go in the folder and click on the Security tab, ALL users have full right to make any changes.    No error displayed whenever I then deselect read only on the general tab, click on or .  But when I re - open the folder and check the properties, read-only is still active.  It's driving me crazy.  HELP!?!?!?!

  And Yes, I tried this:

  "To view or to remove the read-only or the attributes of system files in Windows Vista

  1. Click on start, run, type cmd and press ENTER...
  2. To view the syntax for the Attrib command, Type attrib------? at the command prompt.

  To remove the read-only attribute and to set the system attribute, use the following command:

  attrib - r + s drive:------------

  For example, to remove the read-only attribute and set the attribute to system for the C:\Test folder, use the following command:

  attrib - r + s c:\test

  Be aware that some programs may not operate correctly with folders for which the read-only attribute and the system attribute are granted. Therefore, use the following command to remove these attributes:

  attrib - r s by car:------------

  For example, to remove both the read-only and the attributes to system for the C:\Test folder, use the following command:

  attrib - r-s c:\test

  If the run command is not listed in the start menu, follow these steps:

  Click Start, click principally made programs, accessories, and then click Run."
  
  
  
  
  And get an error that says: parameter Incorrect Format.

  Have you checked to see if the files in the folder are effectively read-only or if the only problem is that the file is checked in read-only?

  You may need to go higher in the chain of record because some properties are inherited (see advanced security of the folder until you come to one where the special permissions list including all permissions that are inherited for administrators or your user account). It does not stick because you don't have the permissions and/or ownership to allow you to make the change.  You must have permissions to full right for all folders (both on the main page and in the special permissions list) and you will have to take possession of the records as well.  Then change the ownership and permissions for yourself and administrators and don't forget to check the box for all files and subdirectories.  This should give you what you need to make the changes.  Here is some information that might help.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.

  Good luck1

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• try to send photos of the library and photo guard request password aol e-mail site and do not check. the password works fine with aol mail.

  When you try to send photos in the photo library, continuous mail to ask our aol password. Then, it will not check the password. The password works perfectly on our aol mail.

  Please, help us help you. Which product Apple and what version of operating system is running ut? What mail client do you use?

  This forum covers a somewhat limited edition Mac computer desktop which has been interrupted more than a decade. If you really have an eMac:

  

  That's fine, but most people find this forum come here by mistake - that is why I ask. Nevertheless, we must always the OS information and information of mail client mentioned in the first paragraph. If you have a different material that one in the photo, we can ask guests to move to a forum more active where you get more views and more rapid assistance. This forum is the most often "dead" these days.

  Looking forward to your follow-up.

• printing in black and white only on the all-in-one HP Officejet J5780

  I am trying to print page 2 of an article of web in plain black and white.  However, the upper part of the page is red on the web, the main part is black and white only.  No matter how clearly, I insist that I want simple black and white, what I get is the page, printed in red.    The printer does not do what I ask.  How can I fix this?

  Hi daniel199,

  You get the same problem when you try to print from another internet browser?

• Binding of WPF graphics and definition lines and plots only in the ViewModel

  Hello

  is it possible to bind all the Axes and all parcels in the Viewmodel?

  Now I've set the Axes and the plots in Xaml, but I want to generate momentum. Is this possible via the ViewModel?

  My graph now looks like this:

  My ViewModel looks like aktually like this:

  public ChartCollection[] chartCollection { get; set; }
  
     chartCollection = new[] {
          new ChartCollection(1000),
          new ChartCollection(1000),
            new ChartCollection(1000),
          new ChartCollection(1000),
                   new ChartCollection(1000),
          new ChartCollection(1000),
                   new ChartCollection(1000),
          new ChartCollection(1000)
      }; 
  
  and data-insert :
    test = hw.T_a1Actual.ToString();
      chartCollection[0].Append(hw.T_a1Actual);
      chartCollection[1].Append(hw.T_a2Actual);
      chartCollection[2].Append(hw.n_a1Actual);
      chartCollection[3].Append(hw.n_a2Actual);
  
  }));
  

  But I want to generate all the Axes and all dynamic plots. What is the best way to do it?

  I can do this via the ViewModel?

  Thanks in advance

  Manual

  Do not forget that the plots and the scales on a graph are just components and not the user interface objects themselves.

  It would be possible, with little code, take a set of models 'conspiracy' and 'axis' models and generate plots and lines of them, which could then be synchronized with a graphic. If expose you the Plot and AxisDouble components on the model, then the synchronization code would be necessary:

  public static class GraphExtensions {

  // Private property to hold on to synchronizer.
        private static readonly DependencyProperty PlotsSynchronizerProperty =
            DependencyProperty.RegisterAttached(
                "PlotsSynchronizer", typeof( CollectionViewSynchronizer ), typeof( GraphExtensions ) );

  // Public property to declare source of Graph.Plots collection.
        public static readonly DependencyProperty PlotsSourceProperty =
            DependencyProperty.RegisterAttached(
                "PlotsSource", typeof( IEnumerable ), typeof( GraphExtensions ),
                new PropertyMetadata( OnPlotsSourceChanged ) );

  public static IEnumerable GetPlotsSource( Graph g ) {
            return (IEnumerable)g.GetValue( PlotsSourceProperty );
        }

  public static void SetPlotsSource( Graph g, IEnumerable value ) {
            g.SetValue( PlotsSourceProperty, value );
        }

  private static void OnPlotsSourceChanged( DependencyObject d, DependencyPropertyChangedEventArgs e ) {
            var graph = (Graph)d;

  // Retrieve existing synchronizer, or create a new one for the target graph.
            var synchronizer = (CollectionViewSynchronizer)graph.GetValue( PlotsSynchronizerProperty );
            if( synchronizer == null ) {
                synchronizer = new CollectionViewSynchronizer { TargetCollection = graph.Plots };
                graph.SetValue( PlotsSynchronizerProperty, synchronizer );
            }

  // Synchronize graph's plots with new source.
            synchronizer.SourceCollection = CollectionViewSource.GetDefaultView( e.NewValue );
        }
    }

  In XAML, you can set the property attached on the chart as:
      
  : where the model exposes a collection or the observable collection of Plot objects.

  A similar attached property might be set to synchronize the Axes collection on a graph with a collection of model.

• I forgot to check the details proof box on the copy... process need to workaround

  We drove on our fiscal year via the copy of planning process (version 11.1.2.1). In a rush, I did the copy without checking the copy on the detailsboite of support.
  
  Users in the new budget have already made their adjustments to the budget so I can't restart the copy process (or can through the export of existing data, make the copy, and then re-import the new data?)
  
  Looking for ideas/thoughts on how to turnaround the supporting details.
  
  JTS

  How do you export the supporting details using LCM, you will need to filter the xml and then update it to point to the new POV and import. You need to make sure you filter all the detail information support that you are not interested from the XML.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Thunderbird is not save my password even if I continue to check the Save password box. Fails to retrieve mail when I check the box.

  Recently, I've migrated my profile of Thunderbird to a new computer. Everything works great, except that Thunderbird doesn't remember my password for the account. I am the only user on the machine, and I check only one account, so I don't want to set up a master password... I want just the program to remember my password for the e-mail account. I get the question 'Do you want to save your password?', every time I run the program... but if I check the box to do this, mail is not retrieved. (No error message, just nothing happens.) If I get the password without the box, the mail is retrieved. Even with the sending - I wonder for the time of password the first by session I have send a message. If I check the box 'Save password' send fails. If I do not check the box, sending passes.

  This has been a consistent behavior for about a month now. I'm not just randomly in the password incorrectly. It happens that way every time.

  That is what it is? Y at - it a fix for this? I want to just Thunderbird to remember my password.

  Try this:

  Make folders and hidden files visible

  • http://KB.mozillazine.org/Show_hidden_files_and_folders

  In thunderbird

  • Help > troubleshooting information
  • Click on the view file"" button.

  a new window opens showing profile_name folder.

  • Close Thunderbird now - this is important
  • Scroll down - find and delete this file: key3db
  • Close this window - upper-right X

  Restart Thunderbird.

  At the password prompt, enter the password and select the "Manager password use to remember the password" check box and click OK.

  Note: If you use a product like CCleaner, then it's probably compensation info session and password. In this case, you will need to make an exception for files of thunderbird in CCleaner to stop cleaning Thunderbird.

  Please report on the results.

• Used to check the spelling in boxes of response on the forums

  Hello

  I switched to Firefox to chrome and noticed a big difference and it's Firefox does not check the spelling as im typing in boxes... response does not work even in this area

  Looks like install dictionary corrected, why he would come preinstalled without one and have spellchecking on default?

• Can forms 6i, 10g and 11g coexist in the same windows box?

  Hi all.
  
  Is there besides using different ORACLE_HOMEs, any consideration to take into account to install 11 g and to coexist with 6i and 10 g?
  
  I just do a 11g installation, and in addition to having failed, he also do my 6i installation unusable.
  
  Your comments will be greatly appreciated.
  
  Best regards, Luis...!

  Yes, all three can co-exist on the same Windows box. I currently have Oracle Froms 6i and 10g R2 or 11g R2 installed on the same workstation. The builders of form work well, however if you plan to run a form from the forms Builder, you will have conflicts between the (Forms 10 g) OC4J and WebLogic (form 11 g) server. I was able to work around these conflicts by changing the system path and make sure that the inputs of 10g of forms appear before 11g entries when I need to run a form from the Forms Builder 10 g. Conversely, to ensure that 11g entries appear before 10g entries during execution of a form of the 11 g Forms Builder.

  I saw a thread where someone said that they were able to work without having to modify the system path, but I was unable to find this thread again to test their solution. You can search this thread if you do not want to change the system path every time.

  Forms 6i come into conflict because it uses the forms instead of an application server Runtime to run a form from the forms constructor.

  I hope this helps.
  Craig...

  Published by: Silvere on 7 February 2013 13:12