Print and file size

Similar Questions

• my photos should be 100 pixels wide, 100 pixels height and file size not more than 15kb

  photos must be of pixels of width 100 height 100 pixels and the file size no more than 15kb

  photos must be of pixels of width 100 height 100 pixels and the file size no more than 15kb

  ============================
  I suggest that make you copies of your
  photos for this task... you certainly do not
  these very small versions to crush desire
  (replace) your original files.

  Windows Live Photo Gallery-
  How to resize pictures:

  First... If the pictures must be square...
  You can crop the photo by clicking on... Difficulty.
  Crop the Photo / square / apply.

  Right-click one or more selected inches...
  Choose... "Resize" in the menu...
  Choose a size... * Custom / 100 *...
  Navigate to a folder in which to save in...
  On the left, click on the button "resize and save"...

  (I suggest that you save it resized)
  photos to a new folder to prevent
  (replacement) by replacing the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to change the format of VOB file without loss of quality and file size of balloon?

  I try to save a VOB file on a problematic DVD using first Pro CC 2015. Can anyone help me please with selecting the best export settings?

  My goal is to maintain the quality and size of the file as close to the original as possible. I just need to change the file format to something I can easily view on my computer. Sometimes, he tries to simply change the extension from VOB to MPEG, but in this case, I edited (shortened) the original file so need to save again.

  Most of the output options I tried drastically reduce quality or seriously enlarge the size of output file.

  First gives me the following information from the source:

  Type: MPEG Movie

  File size: 675,20 MB

  Image size: 360 x 288

  Frame rate: 25.00

  Audio Format: 48000 Hz - compressed - stereo

  Project Audio Format: 48000 Hz - 32 bit floating point - stereo

  Total time: 00:59:22:02

  Format of the pixels: 1.0940

  AVI, quality 100 gives a file size of 12 GB. Source H.264 match - high bitrate gives a file size of 2 GB. Where does all that extra data?

  Match sequence settings should be an obvious solution, but it gives me a slightly larger file (706,98 MB) with a sharp drop in quality.

  If I select H.264, corresponds to the size of the original image and approach the source of all other settings as I can, the size of the resulting file is still much greater than if I drop the transmission speed. However, first does not show me bitrate of the source until I put it to maintain the same quality?

  I want just the same file in a different format so that I can view them easily. Simple yet I have not been able to find a solution. Can someone point me in the right direction?

  Thank you very much, Berne

  You can not avoid re-encoding. His first mpeg will not give you made smart on mpeg.

  You need a different program if al you want to do is trim down.

  Best Software MPEG video editor | TMPGEnc MPEG Converter Smart 4

  Match sequence settings does exactly what it says. Your sequence (each) works with a codec to preview.

• printer and files of the device will not control panel open

  I have problems with a HP Officejet 5600 307N.  Unable to get printer and folder of device to load from Control Panel.  Any suggestions?

  Open the command prompt

  type in
  net stop spooler and press enter
  then type in
  net start spooler and press enter
  Then, go to the Printers and devices folder.

• Share printer and file sharing has stopped working. -Between a Windows Vista-based computer, a Windows 7 PC and an Xbox 360

  A computer running windows vista and is connected

  Computer B is running windows 7 and it is wireless

  Is the Xbox 360 Wireless

  a couple of weeks computer disappeared from computer B and my xbox network adapter. computer a can still pull files from computer B, but it does not work the other way around. Computer B can share files with my xbox, but computer cannot.

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Networking of computers running different versions of Windows

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Have a read of the link above re Vista file and printer sharing.

  Permissions/Share info is there as well.

  If you use Norton, McAfee, Trend Micro or Kaspersky I.S., make that file and printer sharing is enabled in THE Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall)

  Read the information above.

  See you soon.

  Mick Murphy - Microsoft partner

• Print and preview size full bleed

  Somehow, I've changed my settings in my opinion pront 11.681 1,951 x and can see only a part of my design.

  Once I can see the full design, how to save it as a PDF? I can't save.

  Thank you very much for your help!

  Hi TimothySavage,

  To save your image in a PDF format, go to file--> save as.

  

  From there on, a dialog box is displayed. You can rename your file as you wish, so be sure to select 'PDF' as file type or file format.

  

  This will allow you to export your file to PDF and print it out easily.

  I hope this helps!

  Clarice

• No file size and does not

  I have

  Download Flash Player 10.3 and he duly completed. When I open the Control Panel, add/remove the flashplayer of words is there, but the word size and file size numbers are not. I try to run video trackpass with octoshape and flashplayer for NASCAR site. I have windows xp IE8. I'm going to load video from the site, and it shows download OK until it reaches 80%, then nothing. Help!

  Hello marley, glad that worked for you. It may be confused here

  You can just mark your thread as answered and that should take care of it.

  Thank you

  eidnolb

• problems with quality vs. file size in export to YouTube 1080 p

  Hello

  I used to use NCH videopad as a Publisher began. He had shocking performance but gives really good quality and small size files.

  That is to say, I could export 1080 p 30 min video of good quality for YouTube in less than 2 GB file size, but Premiere Elements can

  Get anywhere near the same quality, even at 4 GB.

  So what I need is someone to tell me the parameters I need.

  Currently I export the shadowplay film recorded in 1080 60 fps 50Mbits (according to shadowplay).

  If I export to AVCH (whatever) with YouTube Widescreen HD - set it to match the source, I can't

  get a good quality. I even put the target at 20 and the other at 18 and it is still grainy quality and file sizes

  4 GB. The only way I can get the same quality I received of Videopad is with a 7 GB file into elements.

  Today I tried to export a video (30 minutes) and all day trying to find a good setting, and

  each parameter gets me grainy footage.

  If someone can you please just give me the detailed settings, I need (without the jargon) please.

  The problem is with file sizes as what he deletes my additions to my half a string because

  limits on usage of my data.

  Thank you

  NeonsStyle

  corn

  I think that you need to remove temporarily and advanced then refreshed. Then go through the following.

  The first link in your last message does not, but that a second was full of information (really great).

  If this is supposed to represent the output of VideoPad, here's the story.

  1. you have an AVCHD.mp4 file MPEG2.mpg is not. The file is 1920 x 1080 @ a progressive frame.

  2. our goal is progressive rate - variable and not constant, noted that the 3 frames rate in playback of video properties...

  minimum frame rate = 10,000 frames per second

  frame rate = 29,888 frames per second

  maximum frame rate = 30,000 images per second

  First Elements not managed well with the video recorded with a variable rather than a constant rate. Symptoms range from Premiere Elements of audio desynchronization to not being able to import the video at all. The typical remedy is to take video in the free program of brake hand to get the H.264.mp4 with constant frame rate (29.97) model. Then, you take the export of brake hand in Premiere Elements project using first elements add Media/files and folders.

  https://handbrake.fr/

  Also note that VideoPad product export with a low flow, i.e. 7759 Kbps (equivalent to 7.7 Mbps). You were trying for 36 / 50 Mbps in the export of Premiere Elements. It is an explanation of the difference in size of the files that run you in your comparisons of software.

  Since you don't seem to be involved with video MPEG2.mpg, I write what follows for information purposes... What do you do with an xml file if you used the 1080p29.97 HDTV high quality predefined with Publish + share/computer/MPEG? You should get a single file, MPEG2.mpg. If you use one of the presets whose name begins with MPEG2 (interlaced preset who is not progressive), then you will get two files, the video file and a file of information m2t.xmlses. Nothing to do with the xml file. All you want is the video file that will be MPEG2.m2t.

  Right now I'd take that video in Handbrake for 1920 x 1080p29.97, like H.264.mp4, import this file in Premiere Elements, export as a AVCHD.mp4 MP4 H.264 1920 x 1080 p 30, get a core file line with default transmission speeds and, if necessary, start to lower the bitrate to 8 Mbit / s by looking at the quality.

  Please consider.

  Thank you.

  RTA

  Add on... If you need a how tos tos for handbrake, let me know. It is quick and easy with the adjustment under video tab key.

• the file size reduction of Essbase cube/pag bitmap compression

  We see some huge pag files in our essbase cube and Oracle had suggested to change the bitmap image compression to see if this will help. (we currently have "no compression")
  That said, what is the difference between the use of ELA versus bitmap encoding for BSO cubes?
  I would like to hear the experiences of others.

  (we currently have "no compression")

  ^ ^ ^ You're going to be very happy. Very, very happy.

  You can read the database administrator Guide - just search for "comrpession.

  It's here: http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_dbag/dstalloc.html

  There are a bunch of updates in custody and the rules concerning the 'better' compression method - it does say I use almost always ELA as the method that seems most effective wrt the disk space. It is logical that this method examines each block and apply the most effective method: pair ELA, bitmap, or Index value. I can't see a difference in calculation between bitmap and ELA.

  How the hell did you in the position of no compression in the first place?

  Kind regards

  Cameron Lackpour

  Published by: CL on July 18, 2011 10:48
  Oops, a couple things:
  (1) after you apply the change of compression in environmental assessments or via MaxL, you must stop and then restart the database for the setting to take effect.
  (2) you must export the database, clear out and reloaded using the new compression method - #1 change affects only new blocks if you could have a mixture of compressed and uncompressed to your db, bliocks which will do nothing for the storage space.
  (3) the only way to really know which method is the most effective is to compare the calculation (remember to write on the disk which could be a little slower than now) and the compression methods is to do it. Try it as a bitmap and note time calc of sampling and file size IND and PAG, so try as ELA and do the same thing.

• Not printing and no to cancel a pdf file

  Hi, I have a photosmart b109n connected by a usb port on my Win 7 Asus netbook. A few days ago, I tried to print a very simple PDF, unfortunately the doesen't print job and it was impossible to erase it (i've fisically unplugged the printer for a while).

  In Print Manager, the file appears in the 'Erasure' status and size (3.2 MB) are fully download on printer.

  I tried to print other files, but they are still in queqe (even if I could erease them).

  No error message, the scanner works properly...

  Can someone help me?

  amonz, have you tried restarting your computer? This should clear any previous print jobs in the queue.

  Let me know if it helps!

• I am trying to print jpeg images simple and every time I try to print the file asking to save to the XPS format, and even then he used to feel. What continues?

  I'm going to print an image

  I select the picture and size and press on print
  The computer then tells me to save it to an Xps file, and it will not print it
  Is happening?

  Hello

  1. Have you tried to open the image in another application (other than stick them in a doc) as standard Windows Picture Gallery and printing from there?
  2. You have installed the Microsoft office program on your computer?

  I suggest to set the default printer and check the status of the issue.

  Change your default printer

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

• Printing of documents that contain the letter and legal-size pages - Laserjet 600 M602

  We have a printer Laserjet 600 M602, that does not automatically select a tray to print every time someone tries to print a document that contains the letter so many pages of legal size.  The default printer for the Tray 1 (Manual power) and the user will have to walk over to the printer and the printer to select the correct tray.  I went in the printers settings via the web interface and I set the tray settings to the following: Tray 1 - any Type of Size/Any, bin 2 - letter/plain, plateau 3 - legal/Plain and it still does not print correctly.  Unfortunately for the printer settings, it was on that I'm comfortable doing.  I read the print driver may have changed, but we use the driver included with the disc and I guess that it would be sufficient that this driver.  Does anyone know of some setting that I might be able to change the printer or if it is indeed a print driver problem?  Any comments would be appreciated.

  Thank you

  I was able to receive help this morning from HP support.  He turns out, there were two things that I needed to change.  The first is that when printing from a pdf file, there is an option in the print area for "Choose paper according to the size of PDF page source" and the second thing, it was with the printer printing preferences.  In the printing preferences, under the "Printing shortcuts" tab, the paper Type has been set to Prepunched.  We changed this Unspecified.  After making these two changes, the user is able to print correctly in the printer.

• Printing more than one page in a single PDF file size

  Hi there, some background everything first: I have a Mac with Mac OS 10.9.5, and I am trying to print from Adobe Reader v11.0.10 PDF files that contains pages with various page formats (some pages are letter, other legal size) in the same document. I have a printer Brother Laser (HL-6180DW) which has several trays and a tray for each paper size.

  The printer can automatically can print documents containing multiple pages with different paper sizes for the for the paper tray right when I use Microsoft Word to print. However, if I have a PDF file and you try to print from Adobe Reader, all pages come out like 8 x 11. I selected the option in the reader print dialog that says "Paper Source to choose the PDF page size" but this does not seem to make a difference. However this same document on a windows 8.1 uses the same version of Adobe Reader and print to the same printer, prints the document with the different paper sizes automatically if I select this option to print. I tried this same test with 3 or 4 different PDF files from different sources, and the results are always the same - works on the PC, does not work on Mac. Would appreciate any ideas on how to make this work the Mac.

  I found this answer posted today:

  https://www.Facebook.com/thenotarycompany/photos/a.195681213955987.1073741828.184433691747 406/489566447900794 /? Type = 3

  "With the version of Adobe Acrobat DC in April 2015, Adobe finally added the option of"Choose paper Source by PDF page size"coveted."

  Other people previously replied:

  https://www.notaryrotary.com/archive/Forum/2013/November/Mac_Users_Software_Printers_to_pr int_mixed_pdf_page_sizes_.html

  "After having a technical conversation with another notary this week, he informed me that brother and Xerox printers can print joint pdf page formats automatically where this functionality is built into their firmware and not dependent on software - is not serious if you use Adobe Acrobat or Mac." Preview. I read that the brother 5370 and 5470 printers can print mixed pages sizes as well as the new Xerox 3610 / 3615. »

  Hope that helps.

• How crop in LR5 and keep the same file size?

  When I crop an image in LR5, it severely reduces the size of the file so that my clients are not able to print their pictures in larger sizes.  Is it possible that I can prevent this, as when I get to the PS?

  When I crop an image in LR5, it severely reduces the size of the file so that my clients are not able to print their pictures in larger sizes.  Is it possible that I can prevent this, as when I get to the PS?

  In my view, is not the size of the file that makes the non-printable picture, it's the cropping or export settings, which makes the non-printable picture. You do a huge amount of cropping? You resize to export? Please give us the details. Please tell us the size of the picture exported in pixels (width and height). Please tell us what size (what size paper) is printing will be.

  The file size is a relatively empty sense information, and it would be wise to ignore it. It is more likely your actions (cropping or resizing during export) which causes the problem of the photo being non-printable.  I say, don't look at the size of the file, do not try to reach a file size, do not try to determine how to increase the size of the file... instead, make sure you use the right export settings and harvest size.

• Backup file that it changes more small PDF type file size point and vertical scaling

  I have an Adobe Illustrator CS6 document with body copy using 6.5 PT. Neue Helvetica LT STD - Bold Condensed & Light Condensed.

  After you save the file as a PDF in Illustrator by using the [smallest file size] parameter, closing and opening of the newly saved in Illustrator - PDF text of 6.5 PT is now 5.53 PT with a vertical scaling of 117.65%.

  This PDF file is for purposes of customer review - on the screen or laser print - not for reproduction. We try to keep the file size as small as possible to make the download and attachments manageable.

  In this case, my client opens the PDF file in Illustrator to check the sizes of text for legal and regulatory purposes.

  If I record the same Illustrator file to PDF using other parameters as [high quality Print], the size of the text is unchanged.

  I was able to repeat the question using Helvetica LT Std instead of Helvetica Neue LT Std.

  I have attached a few screenshots for reference.

  Screenshot Source Illustrator

  

  Acrobat PDF screenshot

  

  I found this old net 2011 where someone had the same problem - but has never been resolved:

  http://forums.Adobe.com/thread/915047

  well I was able to recreate the issue with the exact same font and numbers - matched both of your screenshots.

  To summarize "preserve Illustrator editing capabilities.

  He seems less to do with the "smallest file size" preset as it does with the box "preserve Illustrator editing capabilities". If you click on that even with the smallest size of selected file, you should not have the question - BUT you will have a much larger file (especially if there is high-resolution images).

  Now, with the default size"small file" read PDF in Acrobat it was always pulling up to 6.5 not reducing the size. Opening the rear PDF file in AI causes problems. I trying to reinterpret the changes made to the police (follow-up etc.) but since "Keep editing functions Illustraor" is not checked, it is basically guessing as to what he must do to match like the appearance of the font in the PDF file. Yes police is smaller but the extra vertical scale of the changes that it is visually a game tight.

  So if you save a PDF file without editing functions of checked you will have some funky things happen if you open this PDF back in artificial intelligence ('high quality' preset editing a checked).

  If your client wants to open in artificial intelligence, you will have to give them a larger file with Ia editing capabilities. To try a free Dropbox account or Hightail account.