print to file window appear!

Similar Questions

• Print my pdf files is no longer. After pressing PRINT the 'Print to File' window pops up and I have to press SAVE under to go to the next step. Once the pdf file is saved it is therefore more a pdf but a PRN file. When I try to print the PRN file an error

  Print my pdf files is no longer. After pressing PRINT the 'Print to File' window pops up and I have to press SAVE under to go to the next step. Once the pdf file is saved it is therefore more a pdf but a PRN file. An error message appears when I try to print the PRN file. I need to be able to print my original pdf files. Please notify.

  Looks like you somehow accidentally active the option print to file in the Advanced Options print dialogue. Uncheck that and this problem should go away.

  -Dov

• A cmd / batch file windows appears when I close firefox for a few secconds, why?

  When I close firefox pops up a CMD window and then disappears and firefox closes.
  What happened just after Norton deleted a file because it thinking it was bad (when parsing of his own volition)
  The file that opens the window is located here:
  C:\Users\Robert\AppData\Roaming\Mozilla\Firefox\Profiles\jkqm25xu.default
  I think this is perhaps one of the sessionstore javascript files.

  Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, perhaps an add-on is the cause...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• 6500 printer - when I click on icons in the toolbar of the fax window appears. I want to print?

  Printer laptop HP Officejet 6500 has;  When I click the icon on the toolbar to print the fax window appears.  I can't understand how to change the default printer rather than by fax and if I fax still work?   Thank you abcbuck

  abcbuck

  abcbuck wrote: I'm sorry, Wendy's response was not enough.  It would have been under Windows XP, but now I have Windows 7 and when I do what she suggested that I not give me the option to change the default value.   Please someone solve my problem.

  Hello abcbuck, you could try to go to control panel of configuration, devices and printers, and there should be a list of icons showing the Fax, printer and other icons.

  Watch and see if the Fax has a green check mark in the Fax icon. If so, this would indicate that the fax is set as the default value.

  To change the printer's default value, if there is an icon for your printer, right click on the printer icon and select the default value.

  It should work under Windows 7.

• Ask a "output file name" appears when I try to print

  I am ready to print something and a small box will appear asking you a name of output file, I have no idea what it means. Can you help me please?

  Original title: printer problems

  From Internet Explorer

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I would like to know;

  1. This problem is specific when printing a file in particular?
  2. What is the brand and model of the printer and the computer?
  3. If it works much earlier?

  Please see the advice given by Neeraj S N replied on April 13, 2012.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/unable-to-print-printer-asks-for-output-file-name/97cd3acb-6eea-4c16-9e1f-17343fa21a4f?auth=1

  Let us know if you need more assistance. We will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• How to print to file using windows 7?

  I clicked on "print to a file" and a dialog box appeared asking me to type in an output file - I did not understand what to do then - Office tried typing - but that was not accepted - so I cancelled printing.

  Can you direct me to an explanation and/or instructions please.

  I use Home Premium 32 bit

  Take a look at this: http://ask-leo.com/what_is_print_to_file_used_for.html

  And this: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/what-does-print-to-file-mean/2e73491c-634f-4067-8b7e-c158f647129d

• I upgraded from XP to Windows 7 now to print PDF files with the line down side of the document.

  I upgraded from XP to Windows Professional 7 Professional now print PDF files with line down side of the document. The line does not appear in the document only on the printed page. I reinstalled and lines still there. I tried PDF disturbances and he pulled out the line at the bottom of the page, but not on the side of the document.  The error log is full of printing errors. Any suggestions?

  Your problem solved and answered?

  J W Stuart: http://www.pagestart.com

• The download window appears when the file download but not display download status or maintain the list of downloads as in the past - how to restore this option?

  Formerly the download window showed the State of the download in process and retained a list of files downloaded until I deleted from the list. Now an empty download window appears automatically when I download a file. The window does not reflect the status of the download, download name, etc.. But there is no display of downloaded files. How to restore the function of the download window? I checked the option to display the download window when downloading.

  Check some settings:

  • Options > privacy > [X] do not forget the download history
    • See-> https://support.mozilla.org/en-US/kb/Options%20window%20-%20Privacy%20panel
  • When the use of clear recent history or erase automatically history when Firefox closes, do not check download history
    • See-> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Error "windows cannot open this file. to open this file, windows needs to know what program you want to use to open it"appears just after the start on its own.

  After that I typed my password at startup, windows can not open this file. to open this file, windows needs to know what program you want to use to open it.  At this point, I have no one based on nothing and and messages appear literally on its own. I think it's done my computer very slow also.

  What can I do to fix this?

  It's a site file

  Hi Jose7777777,

  • What version of Windows are you using?
  • How long have you been faced with this problem?
  • Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also view the startup folder.

  I hope this helps.

• Whenever I try to print I get a window 'Print to file' and cannot print the label.

  I print labels on the site of the courier to the United States.  Now whenever I try to print one I get a window 'Print to file' and cannot print the label. So, how can I undo this command?

  Check your default printer, start-> settings-> printer and faxes-> right click on your printer and click "Set as default". I hope this helps.

• WIndows XP "Printer Spooler file was not found" error messages

  original title: I get an error message 2, indicating that the printer spooler file is not? Please help me

  I went into Control Panel, printer spool automatic setting it up he said stop I try to click on start and then it gives me error message. We have always used this printer with this computer, the only thing we did different is disconnect? I have tried different things Ive uninstalled the software, it won't let me reinstall and if I click on add a printer it is empty and won't let me add it...  I would appreciate any help thanks

  Hello

  Can you confirm if spoolsv.exe is located in C:\windows\system32... If this is not the case, try to recover the file "C:\WINDOWS\ServicePackFiles\i386".  I assume that your say is installed in C:\windows.

  Let us know if it works...

• Stuck in 'Print to file' in Windows Vista, Thinkpad R61

  The last time I tried to 'Print to File' a .txt file, a file was created, that I could not open with various software (never had a problem in the past).  Now I can't print any file on my printer, even if the Print to File is not checked.  It is not the printer because I can print a test page to the printer.  I tried to disconnect and reconnect, defragmentation and restart.  Run the utility on the hard drive, no problems identified.   What should I do now?  Thanks for your help.

  Hello

  Welcome to the Microsoft community. I understand that you have a problem with the printer does not print. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. What is the brand and model of the printer?

  3 yu make changes to the computer recently?

  4. what security software is installed on the computer?

  Method 1.

  Start your computer in a clean boot and try printing. A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 2.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Refer.

  Print to the file: http://windows.microsoft.com/en-US/windows-vista/Print-to-file

  Solve printer problems: http://windows.microsoft.com/en-US/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  I hope this helps.

• Windows open not shortcuts to office or all .exe files. Rather 'Open with' window appears.

  If I try and open the shortcuts in office such as Mozilla Firefox or even Microsoft Paint, the "Open with" window appears and makes me choose what program to open it with. None of my .exe files will open directly, they make me choose what program to open it with. Some of them make me reinstall the program every time. Why my .exe files are messy?

  Hello

  Just in case there are persistent pieces of malware here is the method of complete elimination.
  .exe question difficulty in the next message.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now) and
  Double-click it, and then run it like this. You can rename it back later. Do the same with
  other programs according to the needs. Use this method to others as needed - NOT assume all
  a program deletes all or that it is no other malicious software.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  The AV.exe malware goes by many names:
  
  XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010 are thugs
  antivirus, scams for you force to pay for them while they have no advantage at all.

  How to remove Vista Antivirus 2010 as well as the other varieties AV.exe.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform:
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
  Run them in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Print to the file will appear asking the name of output file how can I change this?

  Cannot print

  Hi barrythomas,

  You try to print files to a program or a particular application?

  Do you get any error message when you try to print a file?

  How long you are facing this problem?

  You have made any changes to your computer previously?

  What is the brand and model of your printer?

  I suggest you follow the given method and check if it helps.

  Method 1: Please follow the steps in the below link.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  I hope this helps.

• If I click on anything whatsoever on my desk, a window appears: this file does not have a program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  Original title: all my programs have become more associated with their shortcuts in my windows start.

  All my programs became most associated with their shortcuts. If I click on anything whatsoever on my desk, a window appears: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. " I must do this for each shortcut? Microsoft Word, all my accessories, none of the links are attached to nothing. Y at - it a quick fix to my problem, or I am looking at a restore of the entire system?  Help, please!

  Look at the tutorial on changing to default file associations.
  http://www.mydigitallife.info/how-to-edit-or-change-file-type-or-extension-associations-default-programs-in-Windows-Vista/

  It should help to solve your problem.

  Thank you

  Marilyn