Printers not detected after an update

I have two printers (HP color laserjet CP3525n and Dell V313W) connected to my computer (Windows 7). After an update, the printers are more is detected. I have trouble pushing the problem and he says print spooler service is not running. How can I get to start print spooler running. I need help.


Try to run delete print jobs to remove all print jobs stuck in the queue. Also, it restarts the print spooler.


Tags: Windows

Similar Questions

  • Battery not detected after Windows update


    I own a HP Pavilion G series laptop and I have windows running on it 8.1. Windows just made me finish an update, after which it is not detecing my battery more. Initially, he says: "trendy but no charging current. That's why I shut down the computer, removed the battery and plugged in. Now, he said only: "no battery is detected.

    I should mention that I do not use the original supplied with the laptop battery. It's a long battery life that worked well until the update. Please note that I am not too good with computers.

    I appreciate any kind of help in this situation. In addition, please let me know if any other information is needed to help out me.

    Thank you

    Edit: Now, sound to pass the message between: "no battery is detected" and "trendy but no charging current.

    That of Emad,

    Welcome to the HP Forum.

    The updated patch is maybe not able to detect "non standard" battery you are using.

    You could try to use a Restore Point and affecting the system to a date before the update was installed.  In this way, the offending update will be deleted from your computer.

    Using Microsoft System Restore (Windows 8)

    Contrary to belief, you have a choice on the installation of the updates.   Windows cannot make you install updates on your computer.

    You can set Windows updates notification, so you can decide what updates are valid for your situation.  Many people choose this course as one that fits, even if it forces you to do a little more work.

    If you set the Windows updates to be notified

    • and you always create a Restore Point before you choose to install updates
    • and ONLY install you the important updates (never optional updates)
    • and you've read about the updates that you have any concerns at all
    • then, you may find that you have less long-term problems

    Click on the thumbs-up Kudos to say 'Thank you' for help.

    While I strive to reflect best practices of HP, I do not work for HP.

  • the proxy settings not detected after automatic update

    Following automatic updates on Thursday, I can access is the web.  About Network Diagnostics for Windows, the message error is 'Windows could not automatically detect the network proxy settings '.  I don't see that I have all the proxy settings...  I have a HP Desktop PC HP P6-2260, and I use Windows 7.  It works OK if I do a system restore - but I don't want to have to do one of these whenever I go on the computer.  Any suggsestions?

    Thanks Jaco.  I had a good overview of the updates that have been the cause of the problem.  Many of them related to security, so I checked my security software, and after execution of updates it y it has solved the problem - microsoft updates must have been clashing with updates of security in a way.

  • Satellite A200 HD-DVD - TS-L802A - not detected after firmware update


    I have a Toshiba A200 with the TS - L802A HD-DVD in it drive.
    Tried to burn a dvd, but would not recognize the media, so updated the firmware.

    Update successful, but now after restarting the player is not recognized, in bios it says no optical drive and no sign of him anywhere in VIsta

    Any ideas on how to recover from a bad update?

    Thanks :)

    > Updated successful but now after restarting the player is not recognized in the bios it says no optical drive and no sign of him anywhere in Vista.

    Do you mean that the BIOS does not recognize the CD/DVD drive?
    Hmm, this means that the firmware changed the master/slave/c-salt settings and no BIOS can't recognize the ODD.
    Perhaps you have used a wrong firmware

    Unfortunately, you cannot set the STRANGE to the early firmware so you don t have this firmware.

    On the Toshiba European page driver I could find a firmware, but only for a TS-L632 and TS-L632P TS-L632H readers.

    Perhaps an ASP technician could help you... it's worth a try to get in contact with a technician of the ASP

  • T61p hard 6459CT is not detectable after BIOS update


    I had to modify my drive hard as the original hard drive crashed. installed OS and started to update the drivers from the BIOS. Installed to 2.29 - 1, 08 and rebooted the system, boot to the BIOS and rebooted again and the system boots.

    Receive this error:

    Any help on this is much appreciated.

    Moderator edit: Image > 50 k converted to connect by the Community rules.

    Your problem seems to be related to this topic in this knowledge base article as my guess is that you have installed XP?

    To change the setting back to compatibility, you must enter the BIOS and change it in the Config > menu SATA.

  • Delete buttons do not work after the update of 10.11.16.

    Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

    Any suggestion would be appreciated.

    Greetings, r.fromstouffville!

    It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

    Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

    Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

    How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

    Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

    On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

    Thank you for the communities of Apple Support!

  • Delete photos from my camera do not roll after the update to 9.3.1 IOS iphone 4s, also the photo has not saved when taken by camera

    Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera

    Mhefzi86 wrote:

    Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera

    OK, thanks for sharing.

    Maybe you can provide clarification comments on what happens when you try and what troubleshooting steps you did.

  • iPad will not restart after the update iOS9.3. Should force us the reboot?

    iPad will not restart after the update iOS9.3. Should force us the reboot?

    By restart do you average will not turn on?

    There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

    Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

    You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

  • my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

    my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    Once iTunes to work properly, you should be able to fix your device.


  • AutoFill does not work after last update 3-6-3

    AutoFill does not work after last update 3-6-3

    is after update

    See control if Firefox automatically fills in forms

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
    See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  • my super USB does not work after last update OS EL Capitan

    my super USB does not work after last update os el capitan

    Hi viral_02,

    The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

    Get help with the SuperDrive slot on your Mac computer loading

    If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

    Take care

  • WIFI doesn't work does not correctly after driver update

    I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.


    1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

    2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

    If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

    If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

    For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

    Best regards

  • Second monitor is not detected after upgrade to Windows 10

    After you have installed Windows 10 upgrade Windows 7, my second monitor is no longer functional. The computer is an HP Touch Smart 610-1065qd. I connect on the second monitor through a USB 2.0 Port Replicator 2005pr HP. The Replicator appears as a drive when you look at this PC and an arbitrator in him like HP USB DOCK, as it did in Windows 7. The Replicator seems to work, I can't access the SSD on the device and use a wireless mouse. The receiver is connected to the port replicator. The second monitor, also connected to the Replicator, as it was before the upgrade. Now the system is unable to detect this monitor. The MANAGER of peripheral DEVICES, MONITORS, indicates there is a monitor Active, listed as "PnP monitor" generic Device Manager displays a second monitor as a hidden device. Identified as a "generic PnP monitor' and the State of the device is"currently, this hardware device is not connected to the computer. (Code 45) ». In Windows 7, I don't remember the second monitor listing. USB and the DISPLAY NETWORK DEVICES, the entry is USB PORTS port REPLICATOR 2.0 HP 2005pr. Under GRAPHICS cards, there are two lists. The first is an adapter named "AMD Mobility Radeon HD 5570". This corresponds to my video card. The second adapter named "glance speed Boost. I believe that can installed this. "This device is working properly" is the condition for both cards. I manually checked new drivers for all components. There is no effect. Then, I went to HP and downloaded the most recent Setup to monitor. I then tried to load the drivers and monitoring software. I also loaded the screen in compatibility mode, then in compatibility mode for Windows XP SP3, then compatibility for Windows 7 and finely mode as a regulator. As a result, I tried the same process with the original disc. After each test, I rebooted the system. Still unable to detect the second monitor, nothing in Device Manager and unable to detect a new monitor on screen. I attempt to change the Projection. He also, had no effect on the display. Then, I deleted graphics cards. First of all, the adapter "AMD Mobility Radeon HD 5570", which corresponds to my video card. Second, the "Speed Boost glance. This also, don't give not any what on second monitor display. Even if it is visible only when show it hidden devices is checked. Any suggestions will be appreciated.

    I finely found a fix for the problem to my question; Second monitor, not detected after upgrade to Windows 10. Not the one I was hoping. It turns out that the fault was with the HP 2005pr USB 2.0 Port Replicator. It seems that the driver may be at fault. After more than a month of waiting, I decided to replace the duplicator. I decided to buy a Port adapter to replace the duplicator. What is much less expensive experiment and see if it was infecting the duplicator. It turned out that my second monitor is back and healthy. I decided to continue to use the port adapter and buy a USB Hub to replace this part of the duplicator. I no longer use the HD Audio output, after replacing the old speakers with Bose USB speakers some time ago. I thank everyone for help.

  • B50-30 AIO - SD card reader not detected after upgrading Windows 10. Solved.

    AIO B50-30 (F0AU002US) SD card reader was not detected after that I upgraded to Windows 10. I have installed all the appropriate drivers found on the page for assistance with on Lenovo a fix. Device PCI Device Manager had no driver.

    I installed the driver below and my problem has been fixed.

    I hope this helps someone else?

    Mod edit: System model added to the front of the subject line to improve visibility / clarity

    Thank you for the help with the Forum. I find the help I need with my new Lenovo.

  • HP ENVY dv6 Notebook PC: press the / STOP the envy of hp dv6 7204se do not work after the update of windows 10

    the power button of my hp dv6 7204se envy key do not work after the update of windows 10

    any help on this please?


Maybe you are looking for

  • Failed Installation of SQL Server 2012

    I am trying to install SQL Server 2012. I downloaded SQLEXPRADV_x64_ENU.exe and tried to run. It goes through the mothins to open the file and then I offer the choice of a new installation or an upgrade to an earlier version. I select the new facilit

  • Should I update 64-bit Firefox?

    I have win 8 x 64, but 32-bit firefox version fire fox down recently that I think will not go away. Can I switch to firefox nightly 64-bit might crash less likely. But can lose the support of 32-bit only plugins, extensions, answer soon? I have DellX

  • Signed API question

    I said that I have to paid for RIM signed API. But I've found that I can use "Browser.getDefaultSession ()" free. (It's a signed indeed API). Thus, everything works fine if I just try to open some URL like "Private BS = Browser.getDefaultSession ();B

  • Accidentally deleted my Photo tile.

    I look at one all my photos on my Start Page. The Photo tile made a slideshow of all my photos. Well, a picture popped up and I don't like. So to the right of the Start Page I clicked ON this image. And options jumped upward on the bottom. and I chos

  • First pro under previous versions

    I installed the first pro of my creative cloud app but it does not give me the option to open and it does not appear on my desktop. Its slot of older versions on the creative cloud. I installed photoshop and its opening without problem.