Printing date stamp

Similar Questions

• Certificate of completion with Date stamp

  Greetings,

  Is it possible to make a form that will automatically add a stamp to date. ? Here's the scenario: a user makes a series of questions through an e-learning module. The end of it, they click a button/link that leads to a page that contains a PDF file. The PDF file has a form to fill out so they enter their name in it and at some point, maybe when they get to the pdp, it's time/date stamp for this user. They print the PDF and give it to their supervisor.

  Make sense?

  Maybe it's not possible to get the stamp to be added as soon as they arrive to the PDF, maybe they have to press a button on the PDF of it be added? I don't know what is possible or if it is possible. We would like just to have a way to get a stamp on the PDF document. The PDF file must not be downloaded, there need be printed in paper format, although having an option to have the PDF sent by email to the user may be an option as long as it can only be printed.

  Comments, suggestions?

  Yes, it is possible, with a bit of JavaScript. You can have the date field automatically filled when the form is first opened or after they enter their name. For the latter, you can add the following script to the name field Validate event:

  // Get a reference to the date field
  var f = getField("date");
  
  if (event.value) {
      f.value = util.printd("mm/dd/yyyy", new Date());
  } else {
      f.value = "";
  }
  

  Replace "date" with the actual name of your date field. You can also use a different date format, but this should help you get started. If you fill out when the document is opened, it's a little more complicated, but post again if this is what you want.

• Dynamic date stamp along the page border

  I have a javascript to put a stamp on dynamic date vertically along the left edge of a PDF document.  This script works very well for the first page.  However, on a document of several pages, that the date stamp is not turned 90 degrees, so on the 2nd page, there are just a few letters horizontally.  Here's the script.

  var inches = 72;

  for (variety p = 0; p < this.numPages; p ++) {}

  / / create rectangle to field quads

  aRect var = this.getPageBox ({nPage: p});

  aRect [0] = 0.0;

  aRect [1] = 0.0;

  aRect [2] = 26.0;

  aRect [3] = 792;

  / / now to build text field to fill with date information

  var f = this.addField ("PrintField", "text", p, aRect)

  f.delay = true;

  f.rotation = 90;

  f.textSize = 16;

  f.textFont = fonts. HelvB;

  f.textColor = color.black;

  f.alignment = 'center ';

  f.readonly = true;

  f.print = true;

  f.hidden = true;

  f.delay = false;

  }

  Adds a script level doc to fill out the text field when doc prints from

  Acrobat or Adobe Reader free. Note: the character '\r' represents a

  carriage return.

  var myWillPrintScript = ' var f = this.getField("PrintField"); \r' + ' f.hidden = false; \r' + ' var d = new Date(); \r' + ' year var = d.getYear () + 1900; \r' + ' var minutes = d.getMinutes (); \r' + ' if (mn < 10) {\r' + ' min = "0" + min}; \r' + ' if (d.getHours () > = 12) {\r' + ' mins = minutes + "H"; \r' + '} else {\r' + ' mins = minutes + 'AM' ;} \r' + ' f.value = 'CE DOCUMENT ONLY EFFECTIVE ON' + (d.getMonth () + 1) + "/" + d.getDate () + ' / ' + year;} \r'

  var myDidPrintScript = ' var f = this.getField("PrintField"); \r'

                             + ' f.value = ""; \r'

                             + ' f.hidden = true; \r'

  Now define scripts to run on the will / did print events.

  this.setAction ("WillPrint", myWillPrintScript);

  this.setAction ("DidPrint", myDidPrintScript);

  FYI: This script came from the following options other threads and links

  http://www.PlanetPDF.com/developer/article.asp?contentid=AddingdynamicstampstoPDFswhenprin ting

  http://forums.Adobe.com/thread/286289

  http://forums.Adobe.com/message/1097488#1097488

  Can someone understand why this script does not work on all pages?

  Thank you

  This is a bug in Adobe Acrobat. Add the following code after your loop for:

  for (variety p = 0; p)< this.numpages;="" p++)="">

  var f = this.getField ("PrintField." + p);

  f.Rotation = 90;
  }

• Can I print data that I entered the health of Apple app

  Can I print data that I entered the health of Apple app?

  Yes! You will most likely have to screenshot data then hang your iPhone (including the charger) in your USB port in your computer. After that, you load your screen capture on your computer. Copy and paste into Microsoft word on your computer/laptop and then print! Then you have your printed data.

  I know this is a long process, but it works I tried. Please let me a good review!

  Thank you and goodbye!

  ~~~~~~~~~~~~~~~~~~~~~~~~~

  Best regards, @Jay.Arii

• wdf 0x0000007E (0xc0000005, 0x88a56c9b, 0x8afca948, 0x8afca520) 01000.sys - address 88a56c9b base at 88a 12000 date stamp 4a5bbf28

  wdf 0x0000007E (0xc0000005, 0x88a56c9b, 0x8afca948, 0x8afca520) 01000.sys - address 88a56c9b base at 88a 12000 date stamp 4a5bbf28

  BSOD happens only to reboot or shutdown.

  Hello Pim857,

  Often, we see crashes as a result of a program from loading at startup.

  To solve these, we use the clean boot troubleshooting.

  The following describes this process:

  Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Windows Vista and Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Best regards

  Matthew_Ha

• How can I add a date stamp to a picture after it's already been downloaded in a file?

  A client asked I have add a stamp to date of photos already in a file. Can I go back and add a date to these pictures?

  If you want to add a date stamp on the face of the
  photos... the following free software can be useful to
  a try.

  FWIW... you can add the date corresponding to one
  or a batch of photos using the free software
  FastStone Image Viewer.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm

  I suggest that you create a new folder and add
  copies of your photos for experimental purposes.
  If you are unhappy with the result your originals
  will be intact.

  "Basic steps to add dates to image files.
  using Fast Stone Image Viewer'...
  (FWIW... it's easier to do than to explain)

  (You may need to experiment with the post office, police
  size, color and different Variables to achieve
  the desired result).

  Tools / open the Batch Conversion / tab Batch convert...

  Check the box... Use of advanced options...

  Advanced Options button / tab text.
  Check the box... Add text...
  (If the white field has any text inside...
  by selecting erase it and press your delete key...

  Open the window drop... "Insert a Variable."
  choose... EXIF DateTime / Date and time... Ok...

  Browse for the files you want to attach... Select
  them and on the left, click on the Add button...

  Choose an output Format...

  Choose an output folder...

  Check the "Rename..."

  Click on the button convert...

  When the files are converted... Click done...

  Now go to your backup folder and see the result...

• STOP: 0x0000008E (0xC0000005, 0xBF9568C8, 0xA6864C00, 0x00000000) win32k.sys - address BF9568C8 base at BF800000, Date stamp 4ff2f633

  Hi, I get a blue screen frequently with the below error message.
  "Technical information:
  A problem has been detected and windows has shut down to prevent damage to your computer.
  
  
  STOP: 0X0000008E (0XC0000005, 0XBF9568C8, 0XA6864C00, 0X00000000)
  Win32k.sys - address BF9568C8 base at BF800000, Date stamp 4ff2f633
  
  
  Beginning physical memory dump.
  Complete physical memory dump.
  For more assistance, contact your system administrator or technical support.  "
  I am using Packard bell Easynote MX45.
  XP Home edition Version 2002
  SP3
  Inter (R) CPU [email protected] GHz.
  3 GB Ram
  could someone help me fix it please.

  N

  You are better able to tell us if the problem is resolved.  Continue to run Malwarebytes about once a week.  If the BSOD ceased and MBAM does not show any other infection, you're probably good.

• A year in the future of the date stamp

  Anyone know how to date stamp a contact at a later date?  I would like to have the software expiry dates in the contact record so I can send reminders to periods before the date.  I just can't get enough accurate comparisons of past dates, the system is not an option for email 50 weeks after a certain date, for example.

  I think you are looking to use between it, which can be a number of days, weeks, months, hours, date specific or General of the time, today, yesterday or tomorrow.

  Work backwards with the filter between - is between 335 days ago 340 days ago

  Second filter would be - is between 351 days ago 361 days ago

  You can create a test filter to play on any date field and test.

• OfficeJet 7210 - cannot send print data

  I have a Mac OSX Snow Leopard (10.6.4

  Whenever I try to print something, the message "Cannot send print data" appears in the queue, followed by nothing else being printed.  Occasionally, a single sheet out sputted (after 5 or 10 minutes) and with a partially printed line above.

  I don't know what is happening.  I have uninstalled and reinstalled so many times...

  Well...

  not sure if it was the _that_ procedure which did the trick, but my printer works now.

  I followed your suggestion several times - and nothing worked.

  But then I connected to my computer via an ethernet cable to the internet modem which is connected to my computer - instead of using the USB cable.  I took the USB cable and it works fine now.  I never thought to use the Ethernet cable, with the exception of a hunch.

  It is possible that your solution fixed my problem, but it could also be the Ethernet cable (or a combination of both).

  Thanks for your help.

• print data only on multi-part paper via matrix printer?

  More than 20 years ago my little business started using the stream of Delrina form to fill in forms on a computer, and then to print data only preprinted multipart forms paper via a matrix printer.  I understand through a series of acquisitions, Delrina was eventually bought by Adobe and form Flow was abandoned in the early 2000s.

  What is the product that I use today to accomplish this same task?

  You can create a PDF form with Acrobat and when you print, choose to print only the form fields. Only the print areas is a feature of Acrobat, not reader.

• How do I date stamp photo with the date that it was created?

  How do I date stamp photo with the date that it was created?

  donaldm80418165 wrote:

  How do I date stamp photo with the date that it was created?

  Use the text tool.

  Note that you can select the font, color, size of the pt.

• Do not print my stamp room

  I have to do something wrong.  I added exhibition stamps using comment, annotate, stamp to print room A and B exposure on two documents that need to be present.  But when I print documents, stamps of the exhibition displayed clearly on the screen do not appear in the printed document.  What I am doing wrong?

  In the print dialog box under "comment forms &", make sure 'Document and annotations' or 'Document and stamps' is selected.

• Error "cannot send print data.

  Hi gentlemen,

  As I put to update my sistem for snowleopard mac 10.6.3 I can't print and scanning, the work starts and then gets a break with the "Cannot send print data" message.
  Troubleshooting: already uninstalled all HP applications (now the key ctrl, opt, cmd), reinstall, is is set to software update, remove printer and added still, nothing worked.

  Am going to the apple store, they said that you have a 'fixing package?' who could help...

  Any suggestions?

  Problem solved performing once all of the above sequences...

• Script to read Date stamp of VMDK

  Hi all!  I started using the script from Alan Renouf to date stamp & info on our virtual machines (http://www.virtu-al.net/2010/02/23/who-created-that-vm/).  It works fine; but of course it's limited to the data stored in the CR.  Because our data expires after 90 days - he gave me a lot for the MUCH older VMs.

  Made me think of locations other than info could be and I thought of the idea of the original VMDK file on the data store.  The first VMDK (in most, if not all, cases) seems to have the original timestamp of this file and does not seem to have changed, as the other files in the VM folder on the data store.

  So is it possible read the xxx time stamp. VMDK to each virtual machine in all data warehouses and send date/time to the script from Alan?

  I changed Alan Renouf script "that created this virtual machine?" to try to get the date of creation of Active Directory, if it is not found in the events:

  Connect-VIServer MYVISERVER
  # Uncomment the next line to test this script and tell you what it would do !
  # $WhatIfPreference = $true
  if (-not (Get-PSSnapin VMware.VimAutomation.Core -ErrorAction SilentlyContinue)) {
      Add-PSSnapin VMware.VimAutomation.Core
  }
  if (-not (Get-PSSnapin Quest.ActiveRoles.ADManagement -ErrorAction SilentlyContinue)) {
      Add-PSSnapin Quest.ActiveRoles.ADManagement
  }
  
  $VMs = Get-VM | Sort Name
  $VM = $VMs | Select -First 1
  If (-not $vm.CustomFields.ContainsKey("CreatedBy")) {
      Write-Host "Creating CreatedBy Custom field for all VM's"
      New-CustomAttribute -TargetType VirtualMachine -Name CreatedBy | Out-Null
  }
  If (-not $vm.CustomFields.ContainsKey("CreatedOn")) {
      Write-Host "Creating CreatedOn Custom field for all VM's"
      New-CustomAttribute -TargetType VirtualMachine -Name CreatedOn | Out-Null
  }
  Foreach ($VM in $VMs){
      If ($vm.CustomFields["CreatedBy"] -eq $null -or $vm.CustomFields["CreatedBy"] -eq ""){
          Write-Host "Finding creator for $vm"
          $Event = $VM | Get-VIEvent -Types Info -MaxSamples 99999999 | Where { $_.Gettype().Name -eq "VmBeingDeployedEvent" -or $_.Gettype().Name -eq "VmCreatedEvent" -or $_.Gettype().Name -eq "VmRegisteredEvent" -or $_.Gettype().Name -eq "VmClonedEvent"}
          If (($Event | Measure-Object).Count -eq 0){
              $User = "Unknown"
              $Computer = Get-QADComputer -Identity $VM.Name
              if ($Computer) {
                $Created = $Computer.WhenCreated.ToString()
              }
              else {
                $Created = "Unknown"
              }
          } Else {
              If ($Event.Username -eq "" -or $Event.Username -eq $null) {
                  $User = "Unknown"
              } Else {
                  $User = (Get-QADUser -Identity $Event.Username).DisplayName
                  if ($User -eq $null -or $User -eq ""){
                      $User = $Event.Username
                  }
                  $Created = $Event.CreatedTime
              }
          }
          Write "Adding info to $($VM.Name)"
          Write-Host -ForegroundColor Yellow "CreatedBy $User"
          $VM | Set-CustomField -Name "CreatedBy" -Value $User | Out-Null
          Write-Host -ForegroundColor Yellow "CreatedOn $Created"
          $VM | Set-CustomField -Name "CreatedOn" -Value $Created | Out-Null
      }
  }
  

  Best regards, Robert

  Adding the parameter - MaxSamples for the Get-VIEvent cmdlet.

  Post edited by: RvdNieuwendijk

• How to create personalized with a dynamic date stamps

  I tried to create a customized with a dynamic date stamp. But the date is not dynamic. Help, please

  There are a number of things that need to be properly configured for a stamp to work as a dynamic stamp, form the name of template to the calculation script. If you provide the details of how you set the PDF stamp, it would be useful, as would the next book that has all the information you need: www.amazon.com/About-Stamps-Acrobat® - without paper-Workflows/dp/0985614706 /.